Hi, all

These messages repeat every seconds on syslog:
~~~
kernel: nvme 0000:b1:00.0: AER: aer_status: 0x00000001, aer_mask: 0x00003000
kernel: nvme 0000:b1:00.0: [ 0] RxErr (First)
kernel: nvme 0000:b1:00.0: AER: aer_layer=Physical Layer, aer_agent=Receiver ID
kernel: {1563}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
kernel: {1563}[Hardware Error]: It has been corrected by h/w and requires no further action
kernel: {1563}[Hardware Error]: event severity: corrected
kernel: {1563}[Hardware Error]: Error 0, type: corrected
kernel: {1563}[Hardware Error]: section_type: PCIe error
kernel: {1563}[Hardware Error]: port_type: 0, PCIe end point
kernel: {1563}[Hardware Error]: version: 3.0
kernel: {1563}[Hardware Error]: command: 0x0546, status: 0x0010
kernel: {1563}[Hardware Error]: device_id: 0000:b1:00.0
kernel: {1563}[Hardware Error]: slot: 0
kernel: {1563}[Hardware Error]: secondary_bus: 0x00
kernel: {1563}[Hardware Error]: vendor_id: 0x144d, device_id: 0xa80a
kernel: {1563}[Hardware Error]: class_code: 020801
~~~

The customers have already conducted the hardware vendor. After conducting a detailed hardware diagnosis and checking the SSD model and firmware version, the customers confirmed that there are no problems with the hardware status.

Here are some information about the machine:

dmidecode
~~~
HP Z8 G5 Workstation Desktop PC
~~~

lspci
~~~
b1:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO [144d:a80a] (prog-if 02 [NVM Express])
......
Kernel driver in use: nvme
Kernel modules: nvme
~~~

kernel-4.18.0-553.el8_10.x86_64

Thank you.