################################################################################
INFO: [2025-03-07 21:56:47] Running: 'losetup --find'...
/dev/loop1
INFO: [2025-03-07 21:56:47] Running: 'dd if=/dev/zero of=/tmp/tfile_loop1 iflag=fullblock bs=1M count=500'...
500+0 records in
500+0 records out
524288000 bytes (524 MB, 500 MiB) copied, 0.168427 s, 3.1 GB/s
INFO: [2025-03-07 21:56:50] Running: 'udisksctl loop-setup -f /tmp/tfile_loop1'...
Mapped file /tmp/tfile_loop1 as /dev/loop1.
INFO: [2025-03-07 21:56:50] Running: 'udisksctl loop-delete -b /dev/loop1'...INFO: [2025-03-07 21:56:50] Running: 'losetup --all'...
/dev/loop0: [64768]:204223440 (/sysroot/ostree/deploy/default/deploy/ace74a8dc6ce0bff4f0ab0dc9136d79fbe564886af2e7286a0ff5cf891412384.0/.ostree.cfs)
INFO: Checking for error on the system
INFO: Checking for tainted kernel
INFO: [2025-03-07 21:56:50] Running: 'cat /proc/sys/kernel/tainted'...
0
PASS: Kernel is not tainted.
INFO: Checking abrt for error
WARN: abrt tool does not seem to be installed
WARN: skipping abrt check
INFO: [2025-03-07 21:56:50] Running: 'cat /tmp/previous-dump-check'...
101000000
INFO: Checking for stack dump messages after: 101000000
PASS: No recent dump messages has been found.
INFO: Checking for errors on dmesg.
INFO: [2025-03-07 21:56:50] Running: 'dmesg | grep -i ' segfault ''...INFO: [2025-03-07 21:56:50] Running: 'dmesg | grep -i 'Call Trace:''...PASS: No errors on dmesg have been found.
INFO: No kdump log found for this server
PASS: Search for error on the server
################################ Test Summary ##################################
PASS: Search for error on the server
#############################
Total tests that passed: 1
Total tests that failed: 0
Total tests that skipped: 0
################################################################################
==============================================================================================================
Generating test result report
==============================================================================================================
Test name: storaged/test_udisksctl_loop.py Status: PASS Elapsed Time: 04s
==============================================================================================================
Total - PASS: 1 FAIL: 0 SKIP: 0 WARN: 0 Total Time: 04s
==============================================================================================================
...finished running stqe-test, exit code=0
Usage:
rstrnt-report-result [OPTION?] TASK_PATH RESULT [SCORE]Report results to lab controller. if you don't specify --port or
the server url you must have RECIPE_URL and TASKID defined.
If HARNESS_PREFIX is defined then the value of that must be
prefixed to RECIPE_URL and TASKIDHelp Options:
-h, --help Show help optionsApplication Options:
--port=PORT restraintd port number (Service default: 8081)
-s, --server=URL Server to connect to
-t, --message=TEXT Short 100 characters or less message
-o, --outputfile=FILE Log to upload with result, $OUTPUTFILE is used by default
-p, --disable-plugin=PLUGIN don't run plugin on server side
--no-plugins don't run any plugins on server sidemake: *** [Makefile:35: run] Error 1
[root@localhost udisksctl_loop]#
[root@localhost udisksctl_loop]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
loop0 7:0 0 16.9M 1 loop
sda 8:0 0 745.2G 0 disk
sdb 8:16 0 447.1G 0 disk
├─sdb1 8:17 0 600M 0 part /boot/efi
├─sdb2 8:18 0 1G 0 part /boot
└─sdb3 8:19 0 445.5G 0 part
├─rhel_storageqe--108-root 253:0 0 70G 0 lvm /var
│ /sysroot/ostree/deploy/default/var
│ /etc
│ /sysroot
├─rhel_storageqe--108-swap 253:1 0 15.5G 0 lvm [SWAP]
└─rhel_storageqe--108-home 253:2 0 360G 0 lvm /var/home
sdc 8:32 0 745.2G 0 disk
sdd 8:48 0 447.1G 0 disk
zram0 252:0 0 8G 0 disk [SWAP]
nvme0n1 259:0 0 1.5T 0 disk
[root@localhost udisksctl_loop]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
loop0 7:0 0 16.9M 1 loop
sda 8:0 0 745.2G 0 disk
sdb 8:16 0 447.1G 0 disk
├─sdb1 8:17 0 600M 0 part /boot/efi
├─sdb2 8:18 0 1G 0 part /boot
└─sdb3 8:19 0 445.5G 0 part
├─rhel_storageqe--108-root 253:0 0 70G 0 lvm /var
│ /sysroot/ostree/deploy/default/var
│ /etc
│ /sysroot
├─rhel_storageqe--108-swap 253:1 0 15.5G 0 lvm [SWAP]
└─rhel_storageqe--108-home 253:2 0 360G 0 lvm /var/home
sdc 8:32 0 745.2G 0 disk
sdd 8:48 0 447.1G 0 disk
zram0 252:0 0 8G 0 disk [SWAP]
nvme0n1 259:0 0 1.5T 0 disk
[root@localhost udisksctl_loop]# make run
chmod a+x ./runtest.sh
./runtest.sh
/root/.local/bin/stqe-test
Running stqe-test As root:
==============================================================================================================
Running test 'storaged/test_udisksctl_loop.py'
==============================================================================================================
INFO: [2025-03-07 21:57:31] Running: 'python3 /root/.local/lib/python3.9/site-packages/stqe/tests/storaged/test_udisksctl_loop.py'...
################################## Test Init ###################################
INFO: Checking for error on the system
INFO: Checking for tainted kernel
INFO: [2025-03-07 21:57:31] Running: 'cat /proc/sys/kernel/tainted'...
0
PASS: Kernel is not tainted.
INFO: Checking abrt for error
WARN: abrt tool does not seem to be installed
WARN: skipping abrt check
INFO: [2025-03-07 21:57:31] Running: 'cat /tmp/previous-dump-check'...
101000000
INFO: Checking for stack dump messages after: 101000000
PASS: No recent dump messages has been found.
INFO: Checking for errors on dmesg.
INFO: [2025-03-07 21:57:31] Running: 'dmesg | grep -i ' segfault ''...INFO: [2025-03-07 21:57:31] Running: 'dmesg | grep -i 'Call Trace:''...PASS: No errors on dmesg have been found.
INFO: No kdump log found for this server
### Kernel Info: ###
Kernel version: Linux storageqe-108.rhts.eng.pek2.redhat.com 5.14.0-570.el9.x86_64 #1 SMP PREEMPT_DYNAMIC Mon Feb 17 16:15:43 EST 2025 x86_64 x86_64 x86_64 GNU/Linux
Kernel tainted: 0
### IP settings: ###
INFO: [2025-03-07 21:57:31] Running: 'ip a'...
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eno8303: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether c4:cb:e1:d8:83:9a brd ff:ff:ff:ff:ff:ff
altname enp195s0f0
inet 10.73.194.85/23 brd 10.73.195.255 scope global dynamic noprefixroute eno8303
valid_lft 84270sec preferred_lft 84270sec
3: eno8403: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether c4:cb:e1:d8:83:9b brd ff:ff:ff:ff:ff:ff
altname enp195s0f1
### File system disk space usage: ###
INFO: [2025-03-07 21:57:31] Running: 'df -h'...
Filesystem Size Used Avail Use% Mounted on
devtmpfs 4.0M 0 4.0M 0% /dev
tmpfs 16G 4.0K 16G 1% /dev/shm
tmpfs 6.2G 17M 6.2G 1% /run
efivarfs 304K 81K 219K 27% /sys/firmware/efi/efivars
/dev/mapper/rhel_storageqe--108-root 70G 6.6G 64G 10% /sysroot
composefs 17M 17M 0 100% /
tmpfs 16G 1.7G 14G 11% /tmp
/dev/sdb2 960M 175M 786M 19% /boot
/dev/mapper/rhel_storageqe--108-home 360G 2.6G 358G 1% /var/home
/dev/sdb1 599M 7.1M 592M 2% /boot/efi
tmpfs 1.0M 0 1.0M 0% /run/stratisd/ns_mounts
tmpfs 3.1G 0 3.1G 0% /run/user/0
overlay 70G 6.6G 64G 10% /usr
INFO: [2025-03-07 21:57:31] Running: 'rpm -q device-mapper-multipath'...
device-mapper-multipath-0.8.7-35.el9.x86_64
INFO: [2025-03-07 21:57:31] Running: 'systemctl status multipathd'...
multipathd.service - Device-Mapper Multipath Device Controller
Loaded: loaded (/usr/lib/systemd/system/multipathd.service; enabled; preset: enabled)
Active: inactive (dead) since Fri 2025-03-07 16:21:50 EST; 5h 35min ago
Duration: 507ms
TriggeredBy: multipathd.socket
Condition: start condition failed at Fri 2025-03-07 21:21:51 EST; 35min ago
ConditionPathExists=/etc/multipath.conf was not met
Main PID: 1088 (code=exited, status=0/SUCCESS)
Status: "shutdown"
CPU: 19msMar 07 16:21:49 localhost multipathd[1088]: /etc/multipath.conf does not exist, blacklisting all devices.
Mar 07 16:21:49 localhost multipathd[1088]: You can run "/sbin/mpathconf --enable" to create
Mar 07 16:21:49 localhost multipathd[1088]: /etc/multipath.conf. See man mpathconf(8) for more details
Mar 07 16:21:49 localhost systemd[1]: Started Device-Mapper Multipath Device Controller.
Mar 07 16:21:50 localhost multipathd[1088]: exit (signal)
Mar 07 16:21:50 localhost multipathd[1088]: --------shut down-------
Mar 07 16:21:50 localhost systemd[1]: Stopping Device-Mapper Multipath Device Controller...
Mar 07 16:21:50 localhost systemd[1]: multipathd.service: Deactivated successfully.
Mar 07 16:21:50 localhost systemd[1]: Stopped Device-Mapper Multipath Device Controller.
Mar 07 21:21:51 localhost systemd[1]: Device-Mapper Multipath Device Controller was skipped because of an unmet condition check (ConditionPathExists=/etc/multipath.conf).
[2025-03-07 21:57:31] INFO: Service multipathd is not running.
################################################################################
INFO: [2025-03-07 21:57:31] Running: 'losetup --find'...
/dev/loop1
INFO: [2025-03-07 21:57:31] Running: 'dd if=/dev/zero of=/tmp/tfile_loop1 iflag=fullblock bs=1M count=500'...
500+0 records in
500+0 records out
524288000 bytes (524 MB, 500 MiB) copied, 0.169992 s, 3.1 GB/s
INFO: [2025-03-07 21:57:33] Running: 'udisksctl loop-setup -f /tmp/tfile_loop1'...
Error setting up loop device for /tmp/tfile_loop1: GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._g_2dbd_2dloop_2derror_2dquark.Code1: Error creating loop device: Failed to open the /dev/loop1 device: No such file or directory
FAIL: setup loop device
INFO: [2025-03-07 21:57:33] Running: 'udisksctl loop-delete -b /dev/loop1'...
Error deleting loop device /dev/loop1: GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._g_2dbd_2dloop_2derror_2dquark.Code1: Error deleting '/dev/loop1': Failed to open the /dev/loop1 device: No such file or directory
FAIL: delete_loop_device
Test failed
==============================================================================================================
Generating test result report
==============================================================================================================
Test name: storaged/test_udisksctl_loop.py Status: FAIL Elapsed Time: 02s
==============================================================================================================
Total - PASS: 0 FAIL: 1 SKIP: 0 WARN: 0 Total Time: 02s
==============================================================================================================
...finished running stqe-test, exit code=1
Usage:
rstrnt-report-result [OPTION?] TASK_PATH RESULT [SCORE]Report results to lab controller. if you don't specify --port or
the server url you must have RECIPE_URL and TASKID defined.
If HARNESS_PREFIX is defined then the value of that must be
prefixed to RECIPE_URL and TASKIDHelp Options:
-h, --help Show help optionsApplication Options:
--port=PORT restraintd port number (Service default: 8081)
-s, --server=URL Server to connect to
-t, --message=TEXT Short 100 characters or less message
-o, --outputfile=FILE Log to upload with result, $OUTPUTFILE is used by default
-p, --disable-plugin=PLUGIN don't run plugin on server side
--no-plugins don't run any plugins on server sidemake: *** [Makefile:35: run] Error 1
[root@localhost udisksctl_loop]#
[root@localhost udisksctl_loop]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
loop0 7:0 0 16.9M 1 loop
sda 8:0 0 745.2G 0 disk
sdb 8:16 0 447.1G 0 disk
├─sdb1 8:17 0 600M 0 part /boot/efi
├─sdb2 8:18 0 1G 0 part /boot
└─sdb3 8:19 0 445.5G 0 part
├─rhel_storageqe--108-root 253:0 0 70G 0 lvm /var
│ /sysroot/ostree/deploy/default/var
│ /etc
│ /sysroot
├─rhel_storageqe--108-swap 253:1 0 15.5G 0 lvm [SWAP]
└─rhel_storageqe--108-home 253:2 0 360G 0 lvm /var/home
sdc 8:32 0 745.2G 0 disk
sdd 8:48 0 447.1G 0 disk
zram0 252:0 0 8G 0 disk [SWAP]
nvme0n1 259:0 0 1.5T 0 disk
[root@localhost udisksctl_loop]# systemctl status udisks2
● udisks2.service - Disk Manager
Loaded: loaded (/usr/lib/systemd/system/udisks2.service; enabled; preset: enabled)
Active: active (running) since Fri 2025-03-07 21:41:17 EST; 16min ago
Docs: man:udisks(8)
Main PID: 15773 (udisksd)
Tasks: 5 (limit: 200390)
Memory: 5.9M
CPU: 269ms
CGroup: /system.slice/udisks2.service
└─15773 /usr/libexec/udisks2/udisksdMar 07 21:41:17 storageqe-108.rhts.eng.pek2.redhat.com systemd[1]: Starting Disk Manager...
Mar 07 21:41:17 storageqe-108.rhts.eng.pek2.redhat.com udisksd[15773]: udisks daemon version 2.9.4 starting
Mar 07 21:41:17 storageqe-108.rhts.eng.pek2.redhat.com systemd[1]: Started Disk Manager.
Mar 07 21:41:17 storageqe-108.rhts.eng.pek2.redhat.com udisksd[15773]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Mar 07 21:56:41 storageqe-108.rhts.eng.pek2.redhat.com udisksd[15773]: No longer watching loop device /dev/loop1
Mar 07 21:56:41 storageqe-108.rhts.eng.pek2.redhat.com udisksd[15773]: No longer watching loop device /dev/loop2
Mar 07 21:56:50 storageqe-108.rhts.eng.pek2.redhat.com udisksd[15773]: Set up loop device /dev/loop1 (backed by /tmp/tfile_loop1)
Mar 07 21:56:50 storageqe-108.rhts.eng.pek2.redhat.com udisksd[15773]: Deleted loop device /dev/loop1 (was backed by /tmp/tfile_loop1)
Mar 07 21:56:50 storageqe-108.rhts.eng.pek2.redhat.com udisksd[15773]: No longer watching loop device /dev/loop1
[root@localhost udisksctl_loop]#
[root@localhost udisksctl_loop]# lsmod | grep loop
loop 40960 2
[root@localhost udisksctl_loop]#
Bug
Normal
