+ cat /lib/dracut/dracut-057-104.git20250919.el9_7 dracut-057-104.git20250919.el9_7 + echo /proc/cmdline /proc/cmdline + sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g' /proc/cmdline BOOT_IMAGE=(hd0,gpt2)/vmlinuz-upgrade.x86_64 root=UUID=ab0ebddf-3c19-424b-ae64-1b731dfb0a1f ro boot=UUID=a9954e16-2e8a-4de1-ab29-2ca6943b850b resume=/dev/mapper/luks-e983569c-1255-44dd-8201-6de51ca5385d rd.luks.uuid=luks-522b7104-47c1-4300-b49a-f5603cddea77 rd.lvm.lv=rhel/root rd.luks.uuid=luks-e983569c-1255-44dd-8201-6de51ca5385d rd.lvm.lv=rhel/swap fips=1 console=ttyS0,115200n8 enforcing=0 net.naming-scheme=rhel-8.0 plymouth.enable=0 rd.plymouth=0 + '[' -f /etc/cmdline ']' + for _i in /etc/cmdline.d/*.conf + '[' -f '/etc/cmdline.d/*.conf' ']' + break + cat /proc/self/mountinfo 1 1 0:2 / / rw shared:1 - rootfs none rw 21 1 0:20 / /proc rw,nosuid,nodev,noexec,relatime shared:2 - proc proc rw 22 1 0:21 / /sys rw,nosuid,nodev,noexec,relatime shared:3 - sysfs sysfs rw 23 1 0:5 / /dev rw,nosuid shared:9 - devtmpfs devtmpfs rw,size=4096k,nr_inodes=478705,mode=755,inode64 24 22 0:6 / /sys/kernel/security rw,nosuid,nodev,noexec,relatime shared:4 - securityfs securityfs rw 25 23 0:22 / /dev/shm rw,nosuid,nodev shared:10 - tmpfs tmpfs rw,inode64 26 23 0:23 / /dev/pts rw,nosuid,noexec,relatime shared:11 - devpts devpts rw,gid=5,mode=620,ptmxmode=000 27 1 0:24 / /run rw,nosuid,nodev shared:12 - tmpfs tmpfs rw,size=797064k,nr_inodes=819200,mode=755,inode64 28 22 0:25 / /sys/fs/cgroup rw,nosuid,nodev,noexec,relatime shared:5 - cgroup2 cgroup2 rw,nsdelegate,memory_recursiveprot 29 22 0:26 / /sys/fs/pstore rw,nosuid,nodev,noexec,relatime shared:6 - pstore pstore rw 30 22 0:27 / /sys/firmware/efi/efivars rw,nosuid,nodev,noexec,relatime shared:7 - efivarfs efivarfs rw 31 22 0:28 / /sys/fs/bpf rw,nosuid,nodev,noexec,relatime shared:8 - bpf bpf rw,mode=700 45 27 0:29 / /run/credentials/systemd-sysusers.service ro,nosuid,nodev,noexec,relatime shared:13 - ramfs none rw,mode=700 60 27 0:30 / /run/credentials/systemd-sysctl.service ro,nosuid,nodev,noexec,relatime shared:14 - ramfs none rw,mode=700 48 27 0:31 / /run/credentials/systemd-tmpfiles-setup-dev.service ro,nosuid,nodev,noexec,relatime shared:15 - ramfs none rw,mode=700 50 27 0:32 / /run/credentials/systemd-tmpfiles-setup.service ro,nosuid,nodev,noexec,relatime shared:16 - ramfs none rw,mode=700 32 1 0:33 / /var/lib/nfs/rpc_pipefs rw,relatime shared:17 - rpc_pipefs rpc_pipefs rw 68 22 0:34 / /sys/kernel/config rw,nosuid,nodev,noexec,relatime shared:33 - configfs configfs rw + cat /proc/mounts none / rootfs rw 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 devtmpfs /dev devtmpfs rw,nosuid,size=4096k,nr_inodes=478705,mode=755,inode64 0 0 securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev,inode64 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /run tmpfs rw,nosuid,nodev,size=797064k,nr_inodes=819200,mode=755,inode64 0 0 cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot 0 0 pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0 efivarfs /sys/firmware/efi/efivars efivarfs rw,nosuid,nodev,noexec,relatime 0 0 bpf /sys/fs/bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 0 0 none /run/credentials/systemd-sysusers.service ramfs ro,nosuid,nodev,noexec,relatime,mode=700 0 0 none /run/credentials/systemd-sysctl.service ramfs ro,nosuid,nodev,noexec,relatime,mode=700 0 0 none /run/credentials/systemd-tmpfiles-setup-dev.service ramfs ro,nosuid,nodev,noexec,relatime,mode=700 0 0 none /run/credentials/systemd-tmpfiles-setup.service ramfs ro,nosuid,nodev,noexec,relatime,mode=700 0 0 rpc_pipefs /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0 configfs /sys/kernel/config configfs rw,nosuid,nodev,noexec,relatime 0 0 + blkid /dev/mapper/rhel-opt: UUID="aecc6a62-900f-4bf5-9808-33f54c76499b" TYPE="crypto_LUKS" /dev/mapper/luks-522b7104-47c1-4300-b49a-f5603cddea77: UUID="ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" TYPE="xfs" /dev/mapper/rhel-var: UUID="da585fa3-1b96-4e27-bd1e-8e6bfd8b4000" TYPE="crypto_LUKS" /dev/mapper/rhel-var_log_audit: UUID="aab625bb-4f80-4f26-97be-10a28f75ffc9" TYPE="crypto_LUKS" /dev/mapper/rhel-tmp: UUID="b8e94c2d-855e-43bf-9511-2d530dacfb51" TYPE="crypto_LUKS" /dev/mapper/rhel-swap: UUID="e983569c-1255-44dd-8201-6de51ca5385d" TYPE="crypto_LUKS" /dev/mapper/luks-e983569c-1255-44dd-8201-6de51ca5385d: UUID="c6856101-1c27-4c7d-a2c4-187b95542a55" TYPE="swap" /dev/mapper/rhel-root: UUID="522b7104-47c1-4300-b49a-f5603cddea77" TYPE="crypto_LUKS" /dev/mapper/rhel-var_log: UUID="c32cdc66-3697-416b-8563-3e0f677ab6fe" TYPE="crypto_LUKS" /dev/vda2: UUID="a9954e16-2e8a-4de1-ab29-2ca6943b850b" TYPE="xfs" PARTUUID="d68778af-eb64-4013-945c-d83a37ede240" /dev/vda3: UUID="i8rrgi-oj8v-i633-N9JD-M8q2-2hc1-h1PkHL" TYPE="LVM2_member" PARTUUID="0b5cf661-e4e9-4793-9d6a-ebc842abfb9e" /dev/vda1: SEC_TYPE="msdos" UUID="1AD2-5FCA" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="01c3e693-a8a8-4325-b138-fb4354881291" /dev/mapper/rhel-var_tmp: UUID="d3542a15-11ba-4e6e-85b8-ed646e3c8425" TYPE="crypto_LUKS" + blkid -o udev ID_FS_UUID=aecc6a62-900f-4bf5-9808-33f54c76499b ID_FS_UUID_ENC=aecc6a62-900f-4bf5-9808-33f54c76499b ID_FS_TYPE=crypto_LUKS ID_FS_UUID=ab0ebddf-3c19-424b-ae64-1b731dfb0a1f ID_FS_UUID_ENC=ab0ebddf-3c19-424b-ae64-1b731dfb0a1f ID_FS_TYPE=xfs ID_FS_UUID=da585fa3-1b96-4e27-bd1e-8e6bfd8b4000 ID_FS_UUID_ENC=da585fa3-1b96-4e27-bd1e-8e6bfd8b4000 ID_FS_TYPE=crypto_LUKS ID_FS_UUID=aab625bb-4f80-4f26-97be-10a28f75ffc9 ID_FS_UUID_ENC=aab625bb-4f80-4f26-97be-10a28f75ffc9 ID_FS_TYPE=crypto_LUKS ID_FS_UUID=b8e94c2d-855e-43bf-9511-2d530dacfb51 ID_FS_UUID_ENC=b8e94c2d-855e-43bf-9511-2d530dacfb51 ID_FS_TYPE=crypto_LUKS ID_FS_UUID=e983569c-1255-44dd-8201-6de51ca5385d ID_FS_UUID_ENC=e983569c-1255-44dd-8201-6de51ca5385d ID_FS_TYPE=crypto_LUKS ID_FS_UUID=c6856101-1c27-4c7d-a2c4-187b95542a55 ID_FS_UUID_ENC=c6856101-1c27-4c7d-a2c4-187b95542a55 ID_FS_TYPE=swap ID_FS_UUID=522b7104-47c1-4300-b49a-f5603cddea77 ID_FS_UUID_ENC=522b7104-47c1-4300-b49a-f5603cddea77 ID_FS_TYPE=crypto_LUKS ID_FS_UUID=c32cdc66-3697-416b-8563-3e0f677ab6fe ID_FS_UUID_ENC=c32cdc66-3697-416b-8563-3e0f677ab6fe ID_FS_TYPE=crypto_LUKS ID_FS_UUID=a9954e16-2e8a-4de1-ab29-2ca6943b850b ID_FS_UUID_ENC=a9954e16-2e8a-4de1-ab29-2ca6943b850b ID_FS_TYPE=xfs ID_FS_PARTUUID=d68778af-eb64-4013-945c-d83a37ede240 ID_FS_UUID=i8rrgi-oj8v-i633-N9JD-M8q2-2hc1-h1PkHL ID_FS_UUID_ENC=i8rrgi-oj8v-i633-N9JD-M8q2-2hc1-h1PkHL ID_FS_TYPE=LVM2_member ID_FS_PARTUUID=0b5cf661-e4e9-4793-9d6a-ebc842abfb9e ID_FS_SEC_TYPE=msdos ID_FS_UUID=1AD2-5FCA ID_FS_UUID_ENC=1AD2-5FCA ID_FS_TYPE=vfat ID_FS_PARTLABEL=EFI System Partition ID_FS_PARTUUID=01c3e693-a8a8-4325-b138-fb4354881291 ID_FS_UUID=d3542a15-11ba-4e6e-85b8-ed646e3c8425 ID_FS_UUID_ENC=d3542a15-11ba-4e6e-85b8-ed646e3c8425 ID_FS_TYPE=crypto_LUKS + ls -l /dev/disk/by-diskseq /dev/disk/by-id /dev/disk/by-partlabel /dev/disk/by-partuuid /dev/disk/by-path /dev/disk/by-uuid /dev/disk/by-diskseq: total 0 lrwxrwxrwx 1 root root 9 Feb 12 10:15 1 -> ../../vda lrwxrwxrwx 1 root root 9 Feb 12 10:15 11 -> ../../sr0 lrwxrwxrwx 1 root root 10 Feb 12 10:15 12 -> ../../dm-8 lrwxrwxrwx 1 root root 10 Feb 12 10:15 13 -> ../../dm-9 lrwxrwxrwx 1 root root 10 Feb 12 10:15 2 -> ../../dm-0 lrwxrwxrwx 1 root root 10 Feb 12 10:15 3 -> ../../dm-1 lrwxrwxrwx 1 root root 10 Feb 12 10:15 4 -> ../../dm-2 lrwxrwxrwx 1 root root 10 Feb 12 10:15 5 -> ../../dm-3 lrwxrwxrwx 1 root root 10 Feb 12 10:15 6 -> ../../dm-4 lrwxrwxrwx 1 root root 10 Feb 12 10:15 7 -> ../../dm-5 lrwxrwxrwx 1 root root 10 Feb 12 10:15 8 -> ../../dm-6 lrwxrwxrwx 1 root root 10 Feb 12 10:15 9 -> ../../dm-7 /dev/disk/by-id: total 0 lrwxrwxrwx 1 root root 9 Feb 12 10:15 ata-QEMU_DVD-ROM_QM00001 -> ../../sr0 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-name-luks-522b7104-47c1-4300-b49a-f5603cddea77 -> ../../dm-8 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-name-luks-e983569c-1255-44dd-8201-6de51ca5385d -> ../../dm-9 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-name-rhel-opt -> ../../dm-1 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-name-rhel-root -> ../../dm-7 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-name-rhel-swap -> ../../dm-0 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-name-rhel-tmp -> ../../dm-2 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-name-rhel-var -> ../../dm-6 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-name-rhel-var_log -> ../../dm-5 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-name-rhel-var_log_audit -> ../../dm-4 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-name-rhel-var_tmp -> ../../dm-3 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-uuid-CRYPT-LUKS2-522b710447c14300b49af5603cddea77-luks-522b7104-47c1-4300-b49a-f5603cddea77 -> ../../dm-8 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-uuid-CRYPT-LUKS2-e983569c125544dd82016de51ca5385d-luks-e983569c-1255-44dd-8201-6de51ca5385d -> ../../dm-9 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-uuid-LVM-agK7LMUSLSHmASttZN1Z2yGf7Z1jfePMDsSrYZMbevcAfq0vrRdDGCLUXZBIggMd -> ../../dm-3 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-uuid-LVM-agK7LMUSLSHmASttZN1Z2yGf7Z1jfePMPeJuSX2MaQ5VhTspH6DSmQHZ1NzxcK9V -> ../../dm-5 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-uuid-LVM-agK7LMUSLSHmASttZN1Z2yGf7Z1jfePMQlt5TeWlTJsQXusNcI4j3KtAHdf152N7 -> ../../dm-1 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-uuid-LVM-agK7LMUSLSHmASttZN1Z2yGf7Z1jfePMScZkTxB24vAevJwALhZp7wTBQvvA18Ac -> ../../dm-7 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-uuid-LVM-agK7LMUSLSHmASttZN1Z2yGf7Z1jfePMToSyX8Xrm8hwjh6402iw7c0f1XKuc1Z2 -> ../../dm-6 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-uuid-LVM-agK7LMUSLSHmASttZN1Z2yGf7Z1jfePMUVtRNMwsn6cYkTzbaf26ZjE010BhHHcJ -> ../../dm-0 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-uuid-LVM-agK7LMUSLSHmASttZN1Z2yGf7Z1jfePMZ0fqqUpo0O0JsZOuxM8a2nx0sZI8vj8K -> ../../dm-4 lrwxrwxrwx 1 root root 10 Feb 12 10:15 dm-uuid-LVM-agK7LMUSLSHmASttZN1Z2yGf7Z1jfePMunnZCRq88a76YfPX2fajXMn8lBdmnAya -> ../../dm-2 lrwxrwxrwx 1 root root 10 Feb 12 10:15 lvm-pv-uuid-i8rrgi-oj8v-i633-N9JD-M8q2-2hc1-h1PkHL -> ../../vda3 /dev/disk/by-partlabel: total 0 lrwxrwxrwx 1 root root 10 Feb 12 10:15 EFI\x20System\x20Partition -> ../../vda1 /dev/disk/by-partuuid: total 0 lrwxrwxrwx 1 root root 10 Feb 12 10:15 01c3e693-a8a8-4325-b138-fb4354881291 -> ../../vda1 lrwxrwxrwx 1 root root 10 Feb 12 10:15 0b5cf661-e4e9-4793-9d6a-ebc842abfb9e -> ../../vda3 lrwxrwxrwx 1 root root 10 Feb 12 10:15 d68778af-eb64-4013-945c-d83a37ede240 -> ../../vda2 /dev/disk/by-path: total 0 lrwxrwxrwx 1 root root 9 Feb 12 10:15 pci-0000:00:1f.2-ata-1 -> ../../sr0 lrwxrwxrwx 1 root root 9 Feb 12 10:15 pci-0000:00:1f.2-ata-1.0 -> ../../sr0 lrwxrwxrwx 1 root root 9 Feb 12 10:15 pci-0000:04:00.0 -> ../../vda lrwxrwxrwx 1 root root 10 Feb 12 10:15 pci-0000:04:00.0-part1 -> ../../vda1 lrwxrwxrwx 1 root root 10 Feb 12 10:15 pci-0000:04:00.0-part2 -> ../../vda2 lrwxrwxrwx 1 root root 10 Feb 12 10:15 pci-0000:04:00.0-part3 -> ../../vda3 lrwxrwxrwx 1 root root 9 Feb 12 10:15 virtio-pci-0000:04:00.0 -> ../../vda lrwxrwxrwx 1 root root 10 Feb 12 10:15 virtio-pci-0000:04:00.0-part1 -> ../../vda1 lrwxrwxrwx 1 root root 10 Feb 12 10:15 virtio-pci-0000:04:00.0-part2 -> ../../vda2 lrwxrwxrwx 1 root root 10 Feb 12 10:15 virtio-pci-0000:04:00.0-part3 -> ../../vda3 /dev/disk/by-uuid: total 0 lrwxrwxrwx 1 root root 10 Feb 12 10:15 1AD2-5FCA -> ../../vda1 lrwxrwxrwx 1 root root 10 Feb 12 10:15 522b7104-47c1-4300-b49a-f5603cddea77 -> ../../dm-7 lrwxrwxrwx 1 root root 10 Feb 12 10:15 a9954e16-2e8a-4de1-ab29-2ca6943b850b -> ../../vda2 lrwxrwxrwx 1 root root 10 Feb 12 10:15 aab625bb-4f80-4f26-97be-10a28f75ffc9 -> ../../dm-4 lrwxrwxrwx 1 root root 10 Feb 12 10:15 ab0ebddf-3c19-424b-ae64-1b731dfb0a1f -> ../../dm-8 lrwxrwxrwx 1 root root 10 Feb 12 10:15 aecc6a62-900f-4bf5-9808-33f54c76499b -> ../../dm-1 lrwxrwxrwx 1 root root 10 Feb 12 10:15 b8e94c2d-855e-43bf-9511-2d530dacfb51 -> ../../dm-2 lrwxrwxrwx 1 root root 10 Feb 12 10:15 c32cdc66-3697-416b-8563-3e0f677ab6fe -> ../../dm-5 lrwxrwxrwx 1 root root 10 Feb 12 10:15 c6856101-1c27-4c7d-a2c4-187b95542a55 -> ../../dm-9 lrwxrwxrwx 1 root root 10 Feb 12 10:15 d3542a15-11ba-4e6e-85b8-ed646e3c8425 -> ../../dm-3 lrwxrwxrwx 1 root root 10 Feb 12 10:15 da585fa3-1b96-4e27-bd1e-8e6bfd8b4000 -> ../../dm-6 lrwxrwxrwx 1 root root 10 Feb 12 10:15 e983569c-1255-44dd-8201-6de51ca5385d -> ../../dm-0 + for _i in /etc/conf.d/*.conf + '[' -f /etc/conf.d/systemd.conf ']' + echo /etc/conf.d/systemd.conf /etc/conf.d/systemd.conf + sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g' /etc/conf.d/systemd.conf systemdutildir="/usr/lib/systemd" systemdsystemunitdir="/usr/lib/systemd/system" systemdsystemconfdir="/etc/systemd/system" + command -v lvm + lvm pvdisplay --- Physical volume --- PV Name /dev/vda3 VG Name rhel PV Size 28.80 GiB / not usable 2.00 MiB Allocatable yes (but full) PE Size 4.00 MiB Total PE 7373 Free PE 0 Allocated PE 7373 PV UUID i8rrgi-oj8v-i633-N9JD-M8q2-2hc1-h1PkHL + lvm vgdisplay --- Volume group --- VG Name rhel System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 9 VG Access read/write VG Status resizable MAX LV 0 Cur LV 8 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 28.80 GiB PE Size 4.00 MiB Total PE 7373 Alloc PE / Size 7373 / 28.80 GiB Free PE / Size 0 / 0 VG UUID agK7LM-USLS-HmAS-ttZN-1Z2y-Gf7Z-1jfePM + lvm lvdisplay --- Logical volume --- LV Path /dev/rhel/swap LV Name swap VG Name rhel LV UUID UVtRNM-wsn6-cYkT-zbaf-26Zj-E010-BhHHcJ LV Write Access read/write LV Creation host, time localhost.localdomain, 2026-01-29 06:43:58 +0000 LV Status available # open 1 LV Size 1.00 GiB Current LE 256 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 --- Logical volume --- LV Path /dev/rhel/opt LV Name opt VG Name rhel LV UUID Qlt5Te-WlTJ-sQXu-sNcI-4j3K-tAHd-f152N7 LV Write Access read/write LV Creation host, time localhost.localdomain, 2026-01-29 06:44:05 +0000 LV Status available # open 0 LV Size 1.00 GiB Current LE 256 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Path /dev/rhel/tmp LV Name tmp VG Name rhel LV UUID unnZCR-q88a-76Yf-PX2f-ajXM-n8lB-dmnAya LV Write Access read/write LV Creation host, time localhost.localdomain, 2026-01-29 06:44:12 +0000 LV Status available # open 0 LV Size 1.00 GiB Current LE 256 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Path /dev/rhel/var_tmp LV Name var_tmp VG Name rhel LV UUID DsSrYZ-Mbev-cAfq-0vrR-dDGC-LUXZ-BIggMd LV Write Access read/write LV Creation host, time localhost.localdomain, 2026-01-29 06:44:19 +0000 LV Status available # open 0 LV Size 1.00 GiB Current LE 256 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:3 --- Logical volume --- LV Path /dev/rhel/var_log_audit LV Name var_log_audit VG Name rhel LV UUID Z0fqqU-po0O-0JsZ-OuxM-8a2n-x0sZ-I8vj8K LV Write Access read/write LV Creation host, time localhost.localdomain, 2026-01-29 06:44:26 +0000 LV Status available # open 0 LV Size 1.00 GiB Current LE 256 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:4 --- Logical volume --- LV Path /dev/rhel/var_log LV Name var_log VG Name rhel LV UUID PeJuSX-2MaQ-5VhT-spH6-DSmQ-HZ1N-zxcK9V LV Write Access read/write LV Creation host, time localhost.localdomain, 2026-01-29 06:44:33 +0000 LV Status available # open 0 LV Size 1.00 GiB Current LE 256 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:5 --- Logical volume --- LV Path /dev/rhel/var LV Name var VG Name rhel LV UUID ToSyX8-Xrm8-hwjh-6402-iw7c-0f1X-Kuc1Z2 LV Write Access read/write LV Creation host, time localhost.localdomain, 2026-01-29 06:44:40 +0000 LV Status available # open 0 LV Size 8.00 GiB Current LE 2048 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:6 --- Logical volume --- LV Path /dev/rhel/root LV Name root VG Name rhel LV UUID ScZkTx-B24v-AevJ-wALh-Zp7w-TBQv-vA18Ac LV Write Access read/write LV Creation host, time localhost.localdomain, 2026-01-29 06:44:47 +0000 LV Status available # open 1 LV Size 14.80 GiB Current LE 3789 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:7 + command -v dmsetup + dmsetup ls --tree luks-522b7104-47c1-4300-b49a-f5603cddea77 (253:8) `-rhel-root (253:7) `- (252:3) luks-e983569c-1255-44dd-8201-6de51ca5385d (253:9) `-rhel-swap (253:0) `- (252:3) rhel-opt (253:1) `- (252:3) rhel-tmp (253:2) `- (252:3) rhel-var (253:6) `- (252:3) rhel-var_log (253:5) `- (252:3) rhel-var_log_audit (253:4) `- (252:3) rhel-var_tmp (253:3) `- (252:3) + cat /proc/mdstat Personalities : unused devices: + command -v ip + ip addr 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp1s0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:a9:6f:37 brd ff:ff:ff:ff:ff:ff + command -v journalctl + journalctl -ab --no-pager -o short-monotonic + sed -e 's/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g' [ 0.000000] localhost kernel: Linux version 5.14.0-611.30.1.el9_7.x86_64 (mockbuild@x86-64-04.build.eng.rdu2.redhat.com) (gcc (GCC) 11.5.0 20240719 (Red Hat 11.5.0-11), GNU ld version 2.35.2-67.el9_7.1) #1 SMP PREEMPT_DYNAMIC Thu Jan 29 05:25:20 EST 2026 [ 0.000000] localhost kernel: The list of certified hardware and cloud instances for Red Hat Enterprise Linux 9 can be viewed at the Red Hat Ecosystem Catalog, https://catalog.redhat.com. [ 0.000000] localhost kernel: Command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-upgrade.x86_64 root=UUID=ab0ebddf-3c19-424b-ae64-1b731dfb0a1f ro boot=UUID=a9954e16-2e8a-4de1-ab29-2ca6943b850b resume=/dev/mapper/luks-e983569c-1255-44dd-8201-6de51ca5385d rd.luks.uuid=luks-522b7104-47c1-4300-b49a-f5603cddea77 rd.lvm.lv=rhel/root rd.luks.uuid=luks-e983569c-1255-44dd-8201-6de51ca5385d rd.lvm.lv=rhel/swap fips=1 console=ttyS0,115200n8 enforcing=0 net.naming-scheme=rhel-8.0 plymouth.enable=0 rd.plymouth=0 [ 0.000000] localhost kernel: BIOS-provided physical RAM map: [ 0.000000] localhost kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000002ffff] usable [ 0.000000] localhost kernel: BIOS-e820: [mem 0x0000000000030000-0x000000000004ffff] reserved [ 0.000000] localhost kernel: BIOS-e820: [mem 0x0000000000050000-0x000000000009efff] usable [ 0.000000] localhost kernel: BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] localhost kernel: BIOS-e820: [mem 0x0000000000100000-0x000000007cbbcfff] usable [ 0.000000] localhost kernel: BIOS-e820: [mem 0x000000007cbbd000-0x000000007cbc8fff] ACPI data [ 0.000000] localhost kernel: BIOS-e820: [mem 0x000000007cbc9000-0x000000007e8ecfff] usable [ 0.000000] localhost kernel: BIOS-e820: [mem 0x000000007e8ed000-0x000000007eb6cfff] reserved [ 0.000000] localhost kernel: BIOS-e820: [mem 0x000000007eb6d000-0x000000007eb7efff] ACPI data [ 0.000000] localhost kernel: BIOS-e820: [mem 0x000000007eb7f000-0x000000007ebfefff] ACPI NVS [ 0.000000] localhost kernel: BIOS-e820: [mem 0x000000007ebff000-0x000000007efd2fff] usable [ 0.000000] localhost kernel: BIOS-e820: [mem 0x000000007efd3000-0x000000007eff2fff] reserved [ 0.000000] localhost kernel: BIOS-e820: [mem 0x000000007eff3000-0x000000007effffff] usable [ 0.000000] localhost kernel: BIOS-e820: [mem 0x000000007f000000-0x000000007fffffff] reserved [ 0.000000] localhost kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] localhost kernel: BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] localhost kernel: BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] localhost kernel: NX (Execute Disable) protection: active [ 0.000000] localhost kernel: APIC: Static calls initialized [ 0.000000] localhost kernel: e820: update [mem 0x7cbb3018-0x7cbbca57] usable ==> usable [ 0.000000] localhost kernel: e820: update [mem 0x7cb79018-0x7cbb2857] usable ==> usable [ 0.000000] localhost kernel: extended physical RAM map: [ 0.000000] localhost kernel: reserve setup_data: [mem 0x0000000000000000-0x000000000002ffff] usable [ 0.000000] localhost kernel: reserve setup_data: [mem 0x0000000000030000-0x000000000004ffff] reserved [ 0.000000] localhost kernel: reserve setup_data: [mem 0x0000000000050000-0x000000000009efff] usable [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] localhost kernel: reserve setup_data: [mem 0x0000000000100000-0x000000007cb79017] usable [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007cb79018-0x000000007cbb2857] usable [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007cbb2858-0x000000007cbb3017] usable [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007cbb3018-0x000000007cbbca57] usable [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007cbbca58-0x000000007cbbcfff] usable [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007cbbd000-0x000000007cbc8fff] ACPI data [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007cbc9000-0x000000007e8ecfff] usable [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007e8ed000-0x000000007eb6cfff] reserved [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007eb6d000-0x000000007eb7efff] ACPI data [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007eb7f000-0x000000007ebfefff] ACPI NVS [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007ebff000-0x000000007efd2fff] usable [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007efd3000-0x000000007eff2fff] reserved [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007eff3000-0x000000007effffff] usable [ 0.000000] localhost kernel: reserve setup_data: [mem 0x000000007f000000-0x000000007fffffff] reserved [ 0.000000] localhost kernel: reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] localhost kernel: reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] localhost kernel: reserve setup_data: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] localhost kernel: efi: EFI v2.7 by EDK II [ 0.000000] localhost kernel: efi: SMBIOS=0x7e9d2000 TPMFinalLog=0x7ebe7000 ACPI=0x7eb7e000 ACPI 2.0=0x7eb7e014 MEMATTR=0x7d0bd018 MOKvar=0x7e97f000 RNG=0x7eb73018 TPMEventLog=0x7cbbd018 [ 0.000000] localhost kernel: secureboot: Secure boot enabled [ 0.000000] localhost kernel: Kernel is locked down from EFI Secure Boot mode; see man kernel_lockdown.7 [ 0.000000] localhost kernel: SMBIOS 2.8 present. [ 0.000000] localhost kernel: DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20251119-3.fc43 11/19/2025 [ 0.000000] localhost kernel: Hypervisor detected: KVM [ 0.000000] localhost kernel: kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] localhost kernel: kvm-clock: using sched offset of 12654913090 cycles [ 0.000003] localhost kernel: clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000006] localhost kernel: tsc: Detected 2496.000 MHz processor [ 0.000096] localhost kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000099] localhost kernel: e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000106] localhost kernel: last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.000141] localhost kernel: MTRR map: 4 entries (2 fixed + 2 variable; max 18), built from 8 variable MTRRs [ 0.000143] localhost kernel: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000183] localhost kernel: last_pfn = 0x7f000 max_arch_pfn = 0x400000000 [ 0.009549] localhost kernel: Using GB pages for direct mapping [ 0.009935] localhost kernel: secureboot: Secure boot enabled [ 0.009935] localhost kernel: RAMDISK: [mem 0x4f054000-0x58214fff] [ 0.009938] localhost kernel: ACPI: Early table checksum verification disabled [ 0.009942] localhost kernel: ACPI: RSDP 0x000000007EB7E014 000024 (v02 BOCHS ) [ 0.009945] localhost kernel: ACPI: XSDT 0x000000007EB7D0E8 000054 (v01 BOCHS BXPC 00000001 01000013) [ 0.009949] localhost kernel: ACPI: FACP 0x000000007EB79000 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009954] localhost kernel: ACPI: DSDT 0x000000007EB7A000 002D89 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009958] localhost kernel: ACPI: FACS 0x000000007EBB5000 000040 [ 0.009962] localhost kernel: ACPI: APIC 0x000000007EB78000 000080 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009965] localhost kernel: ACPI: TPM2 0x000000007EB77000 00004C (v04 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009969] localhost kernel: ACPI: MCFG 0x000000007EB76000 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009972] localhost kernel: ACPI: WAET 0x000000007EB75000 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009974] localhost kernel: ACPI: BGRT 0x000000007EB74000 000038 (v01 INTEL EDK2 00000002 01000013) [ 0.009976] localhost kernel: ACPI: Reserving FACP table memory at [mem 0x7eb79000-0x7eb790f3] [ 0.009977] localhost kernel: ACPI: Reserving DSDT table memory at [mem 0x7eb7a000-0x7eb7cd88] [ 0.009977] localhost kernel: ACPI: Reserving FACS table memory at [mem 0x7ebb5000-0x7ebb503f] [ 0.009978] localhost kernel: ACPI: Reserving APIC table memory at [mem 0x7eb78000-0x7eb7807f] [ 0.009978] localhost kernel: ACPI: Reserving TPM2 table memory at [mem 0x7eb77000-0x7eb7704b] [ 0.009979] localhost kernel: ACPI: Reserving MCFG table memory at [mem 0x7eb76000-0x7eb7603b] [ 0.009979] localhost kernel: ACPI: Reserving WAET table memory at [mem 0x7eb75000-0x7eb75027] [ 0.009979] localhost kernel: ACPI: Reserving BGRT table memory at [mem 0x7eb74000-0x7eb74037] [ 0.010136] localhost kernel: No NUMA configuration found [ 0.010136] localhost kernel: Faking a node at [mem 0x0000000000000000-0x000000017fffffff] [ 0.010141] localhost kernel: NODE_DATA(0) allocated [mem 0x17ffd5000-0x17fffffff] [ 0.010398] localhost kernel: Zone ranges: [ 0.010399] localhost kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010400] localhost kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.010400] localhost kernel: Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.010402] localhost kernel: Device empty [ 0.010402] localhost kernel: Movable zone start for each node [ 0.010404] localhost kernel: Early memory node ranges [ 0.010404] localhost kernel: node 0: [mem 0x0000000000001000-0x000000000002ffff] [ 0.010405] localhost kernel: node 0: [mem 0x0000000000050000-0x000000000009efff] [ 0.010405] localhost kernel: node 0: [mem 0x0000000000100000-0x000000007cbbcfff] [ 0.010406] localhost kernel: node 0: [mem 0x000000007cbc9000-0x000000007e8ecfff] [ 0.010406] localhost kernel: node 0: [mem 0x000000007ebff000-0x000000007efd2fff] [ 0.010406] localhost kernel: node 0: [mem 0x000000007eff3000-0x000000007effffff] [ 0.010407] localhost kernel: node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.010408] localhost kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] [ 0.010415] localhost kernel: On node 0, zone DMA: 1 pages in unavailable ranges [ 0.010422] localhost kernel: On node 0, zone DMA: 32 pages in unavailable ranges [ 0.010561] localhost kernel: On node 0, zone DMA: 97 pages in unavailable ranges [ 0.029307] localhost kernel: On node 0, zone DMA32: 12 pages in unavailable ranges [ 0.029375] localhost kernel: On node 0, zone DMA32: 786 pages in unavailable ranges [ 0.029376] localhost kernel: On node 0, zone DMA32: 32 pages in unavailable ranges [ 0.030747] localhost kernel: On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.031506] localhost kernel: ACPI: PM-Timer IO Port: 0x608 [ 0.031518] localhost kernel: ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.031541] localhost kernel: IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.031543] localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.031544] localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.031545] localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.031546] localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.031546] localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.031549] localhost kernel: ACPI: Using ACPI (MADT) for SMP configuration information [ 0.031562] localhost kernel: e820: update [mem 0x7cbf0000-0x7cbf8fff] usable ==> reserved [ 0.031570] localhost kernel: TSC deadline timer available [ 0.031573] localhost kernel: CPU topo: Max. logical packages: 2 [ 0.031574] localhost kernel: CPU topo: Max. logical dies: 2 [ 0.031574] localhost kernel: CPU topo: Max. dies per package: 1 [ 0.031576] localhost kernel: CPU topo: Max. threads per core: 1 [ 0.031577] localhost kernel: CPU topo: Num. cores per package: 1 [ 0.031577] localhost kernel: CPU topo: Num. threads per package: 1 [ 0.031577] localhost kernel: CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs [ 0.031592] localhost kernel: kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.031603] localhost kernel: kvm-guest: KVM setup pv remote TLB flush [ 0.031606] localhost kernel: kvm-guest: setup PV sched yield [ 0.031616] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.031617] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x00030000-0x0004ffff] [ 0.031618] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.031618] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.031619] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x7cb79000-0x7cb79fff] [ 0.031620] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x7cbb2000-0x7cbb2fff] [ 0.031620] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x7cbb3000-0x7cbb3fff] [ 0.031621] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x7cbbc000-0x7cbbcfff] [ 0.031621] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x7cbbd000-0x7cbc8fff] [ 0.031622] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x7cbf0000-0x7cbf8fff] [ 0.031623] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x7e8ed000-0x7eb6cfff] [ 0.031623] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x7eb6d000-0x7eb7efff] [ 0.031623] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x7eb7f000-0x7ebfefff] [ 0.031624] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x7efd3000-0x7eff2fff] [ 0.031625] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x7f000000-0x7fffffff] [ 0.031625] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0x80000000-0xdfffffff] [ 0.031626] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.031626] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfeffbfff] [ 0.031626] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0xfeffc000-0xfeffffff] [ 0.031627] localhost kernel: PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.031627] localhost kernel: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.031628] localhost kernel: Booting paravirtualized kernel on KVM [ 0.031630] localhost kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.035288] localhost kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.036455] localhost kernel: percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u1048576 [ 0.036460] localhost kernel: pcpu-alloc: s225280 r8192 d28672 u1048576 alloc=1*2097152 [ 0.036461] localhost kernel: pcpu-alloc: [0] 0 1 [ 0.036487] localhost kernel: kvm-guest: PV spinlocks enabled [ 0.036489] localhost kernel: PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.036492] localhost kernel: Kernel command line: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-upgrade.x86_64 root=UUID=ab0ebddf-3c19-424b-ae64-1b731dfb0a1f ro boot=UUID=a9954e16-2e8a-4de1-ab29-2ca6943b850b resume=/dev/mapper/luks-e983569c-1255-44dd-8201-6de51ca5385d rd.luks.uuid=luks-522b7104-47c1-4300-b49a-f5603cddea77 rd.lvm.lv=rhel/root rd.luks.uuid=luks-e983569c-1255-44dd-8201-6de51ca5385d rd.lvm.lv=rhel/swap fips=1 console=ttyS0,115200n8 enforcing=0 net.naming-scheme=rhel-8.0 plymouth.enable=0 rd.plymouth=0 [ 0.036563] localhost kernel: fips mode: enabled [ 0.036599] localhost kernel: Unknown kernel command line parameters "BOOT_IMAGE=(hd0,gpt2)/vmlinuz-upgrade.x86_64 boot=UUID=a9954e16-2e8a-4de1-ab29-2ca6943b850b", will be passed to user space. [ 0.036618] localhost kernel: random: crng init done [ 0.038946] localhost kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.040061] localhost kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.040113] localhost kernel: Fallback order for Node 0: 0 [ 0.040115] localhost kernel: Built 1 zonelists, mobility grouping on. Total pages: 1025069 [ 0.040116] localhost kernel: Policy zone: Normal [ 0.041489] localhost kernel: mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.041494] localhost kernel: software IO TLB: area num 2. [ 0.058702] localhost kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.058743] localhost kernel: ftrace: allocating 49415 entries in 194 pages [ 0.064976] localhost kernel: ftrace: allocated 194 pages with 3 groups [ 0.065624] localhost kernel: Dynamic Preempt: voluntary [ 0.065661] localhost kernel: rcu: Preemptible hierarchical RCU implementation. [ 0.065661] localhost kernel: rcu: RCU event tracing is enabled. [ 0.065662] localhost kernel: rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.065663] localhost kernel: Trampoline variant of Tasks RCU enabled. [ 0.065663] localhost kernel: Rude variant of Tasks RCU enabled. [ 0.065663] localhost kernel: Tracing variant of Tasks RCU enabled. [ 0.065664] localhost kernel: rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.065664] localhost kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.065667] localhost kernel: RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.065668] localhost kernel: RCU Tasks Rude: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.065669] localhost kernel: RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.068440] localhost kernel: NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.068623] localhost kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.068711] localhost kernel: kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.068739] localhost kernel: Console: colour dummy device 80x25 [ 0.068768] localhost kernel: printk: console [ttyS0] enabled [ 0.161896] localhost kernel: ACPI: Core revision 20230331 [ 0.162256] localhost kernel: APIC: Switch to symmetric I/O mode setup [ 0.162794] localhost kernel: x2apic enabled [ 0.163205] localhost kernel: APIC: Switched APIC routing to: physical x2apic [ 0.163614] localhost kernel: kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask() [ 0.164138] localhost kernel: kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself() [ 0.164792] localhost kernel: kvm-guest: setup PV IPIs [ 0.165673] localhost kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns [ 0.166439] localhost kernel: Calibrating delay loop (skipped) preset value.. 4992.00 BogoMIPS (lpj=2496000) [ 0.167155] localhost kernel: x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.167435] localhost kernel: Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.167435] localhost kernel: Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.167435] localhost kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.167435] localhost kernel: Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit [ 0.167435] localhost kernel: Spectre V2 : Mitigation: Enhanced / Automatic IBRS [ 0.167435] localhost kernel: Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT [ 0.167435] localhost kernel: Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.167435] localhost kernel: Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.167435] localhost kernel: ITS: Mitigation: Aligned branch/return thunks [ 0.167435] localhost kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.167435] localhost kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.167435] localhost kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.167435] localhost kernel: x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 0.167435] localhost kernel: x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 0.167435] localhost kernel: x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 0.167435] localhost kernel: x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.167435] localhost kernel: x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.167435] localhost kernel: x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 [ 0.167435] localhost kernel: x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 [ 0.167435] localhost kernel: x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 [ 0.167435] localhost kernel: x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 [ 0.167435] localhost kernel: x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. [ 0.167435] localhost kernel: Freeing SMP alternatives memory: 40K [ 0.167435] localhost kernel: pid_max: default: 32768 minimum: 301 [ 0.167435] localhost kernel: LSM: initializing lsm=lockdown,capability,landlock,yama,integrity,selinux,bpf [ 0.167435] localhost kernel: landlock: Up and running. [ 0.167435] localhost kernel: Yama: becoming mindful. [ 0.167435] localhost kernel: SELinux: Initializing. [ 0.167435] localhost kernel: LSM support for eBPF active [ 0.167435] localhost kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.167435] localhost kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.167435] localhost kernel: smpboot: CPU0: 11th Gen Intel(R) Core(TM) i7-11850H @ 2.50GHz (family: 0x6, model: 0x8d, stepping: 0x1) [ 0.167435] localhost kernel: Performance Events: Icelake events, full-width counters, Intel PMU driver. [ 0.167441] localhost kernel: ... version: 2 [ 0.167697] localhost kernel: ... bit width: 48 [ 0.167954] localhost kernel: ... generic registers: 8 [ 0.168206] localhost kernel: ... value mask: 0000ffffffffffff [ 0.168437] localhost kernel: ... max period: 00007fffffffffff [ 0.168772] localhost kernel: ... fixed-purpose events: 3 [ 0.169030] localhost kernel: ... event mask: 00000007000000ff [ 0.169464] localhost kernel: signal: max sigframe size: 3632 [ 0.169846] localhost kernel: rcu: Hierarchical SRCU implementation. [ 0.169846] localhost kernel: rcu: Max phase no-delay instances is 400. [ 0.171681] localhost kernel: smp: Bringing up secondary CPUs ... [ 0.172185] localhost kernel: smpboot: x86: Booting SMP configuration: [ 0.172186] localhost kernel: .... node #0, CPUs: #1 [ 0.173488] localhost kernel: smp: Brought up 1 node, 2 CPUs [ 0.173488] localhost kernel: smpboot: Total of 2 processors activated (9984.00 BogoMIPS) [ 0.185014] localhost kernel: node 0 deferred pages initialised in 10ms [ 0.185020] localhost kernel: Memory: 3825728K/4174080K available (16384K kernel code, 5778K rwdata, 14012K rodata, 4076K init, 7300K bss, 344440K reserved, 0K cma-reserved) [ 0.185444] localhost kernel: devtmpfs: initialized [ 0.185444] localhost kernel: x86/mm: Memory block size: 128MB [ 0.185486] localhost kernel: ACPI: PM: Registering ACPI NVS region [mem 0x7eb7f000-0x7ebfefff] (524288 bytes) [ 0.185524] localhost kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.185527] localhost kernel: futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.185600] localhost kernel: pinctrl core: initialized pinctrl subsystem [ 0.187744] localhost kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.187850] localhost kernel: DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.187854] localhost kernel: DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.187858] localhost kernel: DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.187868] localhost kernel: audit: initializing netlink subsys (disabled) [ 0.188015] localhost kernel: thermal_sys: Registered thermal governor 'fair_share' [ 0.188015] localhost kernel: thermal_sys: Registered thermal governor 'step_wise' [ 0.188016] localhost kernel: thermal_sys: Registered thermal governor 'user_space' [ 0.188023] localhost kernel: audit: type=2000 audit(1770891341.707:1): state=initialized audit_enabled=0 res=1 [ 0.188892] localhost kernel: cpuidle: using governor menu [ 0.189435] localhost kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.189435] localhost kernel: PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.189435] localhost kernel: PCI: Using configuration type 1 for base access [ 0.192438] localhost kernel: kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.196241] localhost kernel: HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.196243] localhost kernel: HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.196244] localhost kernel: HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.196245] localhost kernel: HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.197524] localhost kernel: Demotion targets for Node 0: null [ 0.197905] localhost kernel: cryptd: max_cpu_qlen set to 1000 [ 0.198588] localhost kernel: ACPI: Added _OSI(Module Device) [ 0.198883] localhost kernel: ACPI: Added _OSI(Processor Device) [ 0.199175] localhost kernel: ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.199440] localhost kernel: ACPI: Added _OSI(Processor Aggregator Device) [ 0.200499] localhost kernel: ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.201315] localhost kernel: ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.201506] localhost kernel: ACPI: Interpreter enabled [ 0.201755] localhost kernel: ACPI: PM: (supports S0 S5) [ 0.202001] localhost kernel: ACPI: Using IOAPIC for interrupt routing [ 0.202408] localhost kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.202410] localhost kernel: PCI: Ignoring E820 reservations for host bridge windows [ 0.202887] localhost kernel: ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.204533] localhost kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.204948] localhost kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.205459] localhost kernel: acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR DPC] [ 0.205980] localhost kernel: acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability] [ 0.206612] localhost kernel: PCI host bridge to bus 0000:00 [ 0.206893] localhost kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.207330] localhost kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.207438] localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.207922] localhost kernel: pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window] [ 0.208405] localhost kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.208437] localhost kernel: pci_bus 0000:00: root bus resource [mem 0x7000000000-0x77ffffffff window] [ 0.208948] localhost kernel: pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.209335] localhost kernel: pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint [ 0.210350] localhost kernel: pci 0000:00:01.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint [ 0.211485] localhost kernel: pci 0000:00:01.0: BAR 0 [mem 0x80000000-0x807fffff pref] [ 0.211548] localhost kernel: pci 0000:00:01.0: BAR 2 [mem 0x70e0000000-0x70e0003fff 64bit pref] [ 0.211555] localhost kernel: pci 0000:00:01.0: BAR 4 [mem 0x8244f000-0x8244ffff] [ 0.211563] localhost kernel: pci 0000:00:01.0: ROM [mem 0xffff0000-0xffffffff pref] [ 0.212582] localhost kernel: pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.213435] localhost kernel: pci 0000:00:02.0: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.214435] localhost kernel: pci 0000:00:02.0: BAR 0 [mem 0x8244e000-0x8244efff] [ 0.214435] localhost kernel: pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.214435] localhost kernel: pci 0000:00:02.0: bridge window [mem 0x82200000-0x823fffff] [ 0.214435] localhost kernel: pci 0000:00:02.0: bridge window [mem 0x7000000000-0x700fffffff 64bit pref] [ 0.214435] localhost kernel: pci 0000:00:02.0: enabling Extended Tags [ 0.214435] localhost kernel: pci 0000:00:02.1: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.216435] localhost kernel: pci 0000:00:02.1: BAR 0 [mem 0x8244d000-0x8244dfff] [ 0.216435] localhost kernel: pci 0000:00:02.1: PCI bridge to [bus 02] [ 0.216435] localhost kernel: pci 0000:00:02.1: bridge window [mem 0x82000000-0x821fffff] [ 0.216435] localhost kernel: pci 0000:00:02.1: bridge window [mem 0x7010000000-0x701fffffff 64bit pref] [ 0.216435] localhost kernel: pci 0000:00:02.1: enabling Extended Tags [ 0.216435] localhost kernel: pci 0000:00:02.2: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.217435] localhost kernel: pci 0000:00:02.2: BAR 0 [mem 0x8244c000-0x8244cfff] [ 0.217435] localhost kernel: pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.217435] localhost kernel: pci 0000:00:02.2: bridge window [mem 0x81e00000-0x81ffffff] [ 0.217435] localhost kernel: pci 0000:00:02.2: bridge window [mem 0x7020000000-0x702fffffff 64bit pref] [ 0.217435] localhost kernel: pci 0000:00:02.2: enabling Extended Tags [ 0.217435] localhost kernel: pci 0000:00:02.3: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.218191] localhost kernel: pci 0000:00:02.3: BAR 0 [mem 0x8244b000-0x8244bfff] [ 0.218204] localhost kernel: pci 0000:00:02.3: PCI bridge to [bus 04] [ 0.218222] localhost kernel: pci 0000:00:02.3: bridge window [mem 0x81c00000-0x81dfffff] [ 0.218435] localhost kernel: pci 0000:00:02.3: bridge window [mem 0x7030000000-0x703fffffff 64bit pref] [ 0.218435] localhost kernel: pci 0000:00:02.3: enabling Extended Tags [ 0.218435] localhost kernel: pci 0000:00:02.4: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.219094] localhost kernel: pci 0000:00:02.4: BAR 0 [mem 0x8244a000-0x8244afff] [ 0.219107] localhost kernel: pci 0000:00:02.4: PCI bridge to [bus 05] [ 0.219125] localhost kernel: pci 0000:00:02.4: bridge window [mem 0x81a00000-0x81bfffff] [ 0.219435] localhost kernel: pci 0000:00:02.4: bridge window [mem 0x7040000000-0x704fffffff 64bit pref] [ 0.219435] localhost kernel: pci 0000:00:02.4: enabling Extended Tags [ 0.219435] localhost kernel: pci 0000:00:02.5: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.220435] localhost kernel: pci 0000:00:02.5: BAR 0 [mem 0x82449000-0x82449fff] [ 0.220435] localhost kernel: pci 0000:00:02.5: PCI bridge to [bus 06] [ 0.220435] localhost kernel: pci 0000:00:02.5: bridge window [mem 0x81800000-0x819fffff] [ 0.220435] localhost kernel: pci 0000:00:02.5: bridge window [mem 0x7050000000-0x705fffffff 64bit pref] [ 0.220435] localhost kernel: pci 0000:00:02.5: enabling Extended Tags [ 0.221653] localhost kernel: pci 0000:00:02.6: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.222435] localhost kernel: pci 0000:00:02.6: BAR 0 [mem 0x82448000-0x82448fff] [ 0.222435] localhost kernel: pci 0000:00:02.6: PCI bridge to [bus 07] [ 0.222435] localhost kernel: pci 0000:00:02.6: bridge window [mem 0x81600000-0x817fffff] [ 0.222453] localhost kernel: pci 0000:00:02.6: bridge window [mem 0x7060000000-0x706fffffff 64bit pref] [ 0.222524] localhost kernel: pci 0000:00:02.6: enabling Extended Tags [ 0.223435] localhost kernel: pci 0000:00:02.7: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.223444] localhost kernel: pci 0000:00:02.7: BAR 0 [mem 0x82447000-0x82447fff] [ 0.223468] localhost kernel: pci 0000:00:02.7: PCI bridge to [bus 08] [ 0.223526] localhost kernel: pci 0000:00:02.7: bridge window [mem 0x81400000-0x815fffff] [ 0.224227] localhost kernel: pci 0000:00:02.7: bridge window [mem 0x7070000000-0x707fffffff 64bit pref] [ 0.224305] localhost kernel: pci 0000:00:02.7: enabling Extended Tags [ 0.224791] localhost kernel: pci 0000:00:03.0: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.225435] localhost kernel: pci 0000:00:03.0: BAR 0 [mem 0x82446000-0x82446fff] [ 0.225435] localhost kernel: pci 0000:00:03.0: PCI bridge to [bus 09] [ 0.225435] localhost kernel: pci 0000:00:03.0: bridge window [mem 0x81200000-0x813fffff] [ 0.225435] localhost kernel: pci 0000:00:03.0: bridge window [mem 0x7080000000-0x708fffffff 64bit pref] [ 0.225453] localhost kernel: pci 0000:00:03.0: enabling Extended Tags [ 0.226435] localhost kernel: pci 0000:00:03.1: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.226444] localhost kernel: pci 0000:00:03.1: BAR 0 [mem 0x82445000-0x82445fff] [ 0.226477] localhost kernel: pci 0000:00:03.1: PCI bridge to [bus 0a] [ 0.226511] localhost kernel: pci 0000:00:03.1: bridge window [mem 0x81000000-0x811fffff] [ 0.227099] localhost kernel: pci 0000:00:03.1: bridge window [mem 0x7090000000-0x709fffffff 64bit pref] [ 0.227163] localhost kernel: pci 0000:00:03.1: enabling Extended Tags [ 0.227435] localhost kernel: pci 0000:00:03.2: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.227444] localhost kernel: pci 0000:00:03.2: BAR 0 [mem 0x82444000-0x82444fff] [ 0.227481] localhost kernel: pci 0000:00:03.2: PCI bridge to [bus 0b] [ 0.227572] localhost kernel: pci 0000:00:03.2: bridge window [mem 0x80e00000-0x80ffffff] [ 0.228435] localhost kernel: pci 0000:00:03.2: bridge window [mem 0x70a0000000-0x70afffffff 64bit pref] [ 0.228438] localhost kernel: pci 0000:00:03.2: enabling Extended Tags [ 0.229435] localhost kernel: pci 0000:00:03.3: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.229435] localhost kernel: pci 0000:00:03.3: BAR 0 [mem 0x82443000-0x82443fff] [ 0.229435] localhost kernel: pci 0000:00:03.3: PCI bridge to [bus 0c] [ 0.229435] localhost kernel: pci 0000:00:03.3: bridge window [mem 0x80c00000-0x80dfffff] [ 0.229710] localhost kernel: pci 0000:00:03.3: bridge window [mem 0x70b0000000-0x70bfffffff 64bit pref] [ 0.229796] localhost kernel: pci 0000:00:03.3: enabling Extended Tags [ 0.230435] localhost kernel: pci 0000:00:03.4: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.230461] localhost kernel: pci 0000:00:03.4: BAR 0 [mem 0x82442000-0x82442fff] [ 0.230474] localhost kernel: pci 0000:00:03.4: PCI bridge to [bus 0d] [ 0.230506] localhost kernel: pci 0000:00:03.4: bridge window [mem 0x80a00000-0x80bfffff] [ 0.231084] localhost kernel: pci 0000:00:03.4: bridge window [mem 0x70c0000000-0x70cfffffff 64bit pref] [ 0.231167] localhost kernel: pci 0000:00:03.4: enabling Extended Tags [ 0.231435] localhost kernel: pci 0000:00:03.5: [1b36:000c] type 01 class 0x060400 PCIe Root Port [ 0.233055] localhost kernel: pci 0000:00:03.5: BAR 0 [mem 0x82441000-0x82441fff] [ 0.233067] localhost kernel: pci 0000:00:03.5: PCI bridge to [bus 0e] [ 0.233133] localhost kernel: pci 0000:00:03.5: bridge window [mem 0x80800000-0x809fffff] [ 0.233435] localhost kernel: pci 0000:00:03.5: bridge window [mem 0x70d0000000-0x70dfffffff 64bit pref] [ 0.233435] localhost kernel: pci 0000:00:03.5: enabling Extended Tags [ 0.233435] localhost kernel: pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint [ 0.233435] localhost kernel: pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.233435] localhost kernel: pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint [ 0.235507] localhost kernel: pci 0000:00:1f.2: BAR 4 [io 0x6040-0x605f] [ 0.235513] localhost kernel: pci 0000:00:1f.2: BAR 5 [mem 0x82440000-0x82440fff] [ 0.235866] localhost kernel: pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint [ 0.236435] localhost kernel: pci 0000:00:1f.3: BAR 4 [io 0x6000-0x603f] [ 0.236435] localhost kernel: acpiphp: Slot [0] registered [ 0.236435] localhost kernel: pci 0000:01:00.0: [1af4:1041] type 00 class 0x020000 PCIe Endpoint [ 0.236465] localhost kernel: pci 0000:01:00.0: BAR 1 [mem 0x82200000-0x82200fff] [ 0.236491] localhost kernel: pci 0000:01:00.0: BAR 4 [mem 0x7000000000-0x7000003fff 64bit pref] [ 0.236499] localhost kernel: pci 0000:01:00.0: ROM [mem 0xfffc0000-0xffffffff pref] [ 0.236533] localhost kernel: pci 0000:01:00.0: enabling Extended Tags [ 0.237435] localhost kernel: pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.238621] localhost kernel: acpiphp: Slot [0-2] registered [ 0.238750] localhost kernel: pci 0000:02:00.0: [1b36:000d] type 00 class 0x0c0330 PCIe Endpoint [ 0.239435] localhost kernel: pci 0000:02:00.0: BAR 0 [mem 0x82000000-0x82003fff 64bit] [ 0.239435] localhost kernel: pci 0000:02:00.0: enabling Extended Tags [ 0.240053] localhost kernel: pci 0000:00:02.1: PCI bridge to [bus 02] [ 0.240435] localhost kernel: acpiphp: Slot [0-3] registered [ 0.240435] localhost kernel: pci 0000:03:00.0: [1af4:1043] type 00 class 0x078000 PCIe Endpoint [ 0.241248] localhost kernel: pci 0000:03:00.0: BAR 1 [mem 0x81e00000-0x81e00fff] [ 0.241286] localhost kernel: pci 0000:03:00.0: BAR 4 [mem 0x7020000000-0x7020003fff 64bit pref] [ 0.241332] localhost kernel: pci 0000:03:00.0: enabling Extended Tags [ 0.242526] localhost kernel: pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.243290] localhost kernel: acpiphp: Slot [0-4] registered [ 0.243451] localhost kernel: pci 0000:04:00.0: [1af4:1042] type 00 class 0x010000 PCIe Endpoint [ 0.244435] localhost kernel: pci 0000:04:00.0: BAR 1 [mem 0x81c00000-0x81c00fff] [ 0.244435] localhost kernel: pci 0000:04:00.0: BAR 4 [mem 0x7030000000-0x7030003fff 64bit pref] [ 0.244435] localhost kernel: pci 0000:04:00.0: enabling Extended Tags [ 0.244435] localhost kernel: pci 0000:00:02.3: PCI bridge to [bus 04] [ 0.245452] localhost kernel: acpiphp: Slot [0-5] registered [ 0.245602] localhost kernel: pci 0000:05:00.0: [1af4:1045] type 00 class 0x00ff00 PCIe Endpoint [ 0.246469] localhost kernel: pci 0000:05:00.0: BAR 1 [mem 0x81a00000-0x81a00fff] [ 0.246498] localhost kernel: pci 0000:05:00.0: BAR 4 [mem 0x7040000000-0x7040003fff 64bit pref] [ 0.246551] localhost kernel: pci 0000:05:00.0: enabling Extended Tags [ 0.247435] localhost kernel: pci 0000:00:02.4: PCI bridge to [bus 05] [ 0.248581] localhost kernel: acpiphp: Slot [0-6] registered [ 0.248747] localhost kernel: pci 0000:06:00.0: [1af4:1044] type 00 class 0x00ff00 PCIe Endpoint [ 0.249947] localhost kernel: pci 0000:06:00.0: BAR 1 [mem 0x81800000-0x81800fff] [ 0.249981] localhost kernel: pci 0000:06:00.0: BAR 4 [mem 0x7050000000-0x7050003fff 64bit pref] [ 0.250049] localhost kernel: pci 0000:06:00.0: enabling Extended Tags [ 0.251371] localhost kernel: pci 0000:00:02.5: PCI bridge to [bus 06] [ 0.252183] localhost kernel: acpiphp: Slot [0-7] registered [ 0.252200] localhost kernel: pci 0000:00:02.6: PCI bridge to [bus 07] [ 0.252435] localhost kernel: acpiphp: Slot [0-8] registered [ 0.252435] localhost kernel: pci 0000:00:02.7: PCI bridge to [bus 08] [ 0.252435] localhost kernel: acpiphp: Slot [0-9] registered [ 0.252435] localhost kernel: pci 0000:00:03.0: PCI bridge to [bus 09] [ 0.252435] localhost kernel: acpiphp: Slot [0-10] registered [ 0.252435] localhost kernel: pci 0000:00:03.1: PCI bridge to [bus 0a] [ 0.254102] localhost kernel: acpiphp: Slot [0-11] registered [ 0.254120] localhost kernel: pci 0000:00:03.2: PCI bridge to [bus 0b] [ 0.254435] localhost kernel: acpiphp: Slot [0-12] registered [ 0.254435] localhost kernel: pci 0000:00:03.3: PCI bridge to [bus 0c] [ 0.254501] localhost kernel: acpiphp: Slot [0-13] registered [ 0.254518] localhost kernel: pci 0000:00:03.4: PCI bridge to [bus 0d] [ 0.255435] localhost kernel: acpiphp: Slot [0-14] registered [ 0.255435] localhost kernel: pci 0000:00:03.5: PCI bridge to [bus 0e] [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.257435] localhost kernel: ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.258437] localhost kernel: iommu: Default domain type: Translated [ 0.258437] localhost kernel: iommu: DMA domain TLB invalidation policy: lazy mode [ 0.258510] localhost kernel: SCSI subsystem initialized [ 0.258550] localhost kernel: ACPI: bus type USB registered [ 0.258586] localhost kernel: usbcore: registered new interface driver usbfs [ 0.258595] localhost kernel: usbcore: registered new interface driver hub [ 0.258603] localhost kernel: usbcore: registered new device driver usb [ 0.258642] localhost kernel: pps_core: LinuxPPS API ver. 1 registered [ 0.258644] localhost kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.258645] localhost kernel: PTP clock support registered [ 0.258741] localhost kernel: EDAC MC: Ver: 3.0.0 [ 0.259910] localhost kernel: Registered efivars operations [ 0.260388] localhost kernel: NetLabel: Initializing [ 0.260390] localhost kernel: NetLabel: domain hash size = 128 [ 0.260390] localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.260417] localhost kernel: NetLabel: unlabeled traffic allowed by default [ 0.260425] localhost kernel: PCI: Using ACPI for IRQ routing [ 0.310595] localhost kernel: PCI: pci_cache_line_size set to 64 bytes [ 0.310827] localhost kernel: e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.310936] localhost kernel: e820: reserve RAM buffer [mem 0x7cb79018-0x7fffffff] [ 0.310941] localhost kernel: e820: reserve RAM buffer [mem 0x7cbb3018-0x7fffffff] [ 0.310943] localhost kernel: e820: reserve RAM buffer [mem 0x7cbbd000-0x7fffffff] [ 0.310944] localhost kernel: e820: reserve RAM buffer [mem 0x7cbf0000-0x7fffffff] [ 0.310945] localhost kernel: e820: reserve RAM buffer [mem 0x7e8ed000-0x7fffffff] [ 0.310946] localhost kernel: e820: reserve RAM buffer [mem 0x7efd3000-0x7fffffff] [ 0.310948] localhost kernel: e820: reserve RAM buffer [mem 0x7f000000-0x7fffffff] [ 0.311071] localhost kernel: pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.311071] localhost kernel: pci 0000:00:01.0: vgaarb: bridge control possible [ 0.311071] localhost kernel: pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.311071] localhost kernel: vgaarb: loaded [ 0.312718] localhost kernel: clocksource: Switched to clocksource kvm-clock [ 0.325884] localhost kernel: VFS: Disk quotas dquot_6.6.0 [ 0.325901] localhost kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.326041] localhost kernel: pnp: PnP ACPI init [ 0.326267] localhost kernel: system 00:04: [mem 0xe0000000-0xefffffff window] has been reserved [ 0.326452] localhost kernel: pnp: PnP ACPI: found 5 devices [ 0.332147] localhost kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.332247] localhost kernel: NET: Registered PF_INET protocol family [ 0.332658] localhost kernel: IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.334756] localhost kernel: tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.334779] localhost kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.334786] localhost kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.334951] localhost kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.335274] localhost kernel: TCP: Hash tables configured (established 32768 bind 32768) [ 0.335558] localhost kernel: MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) [ 0.335573] localhost kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.335617] localhost kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.335714] localhost kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.335727] localhost kernel: NET: Registered PF_XDP protocol family [ 0.335736] localhost kernel: pci 0000:01:00.0: ROM [mem 0xfffc0000-0xffffffff pref]: can't claim; no compatible bridge window [ 0.335745] localhost kernel: pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.335747] localhost kernel: pci 0000:00:02.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.335748] localhost kernel: pci 0000:00:02.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.335749] localhost kernel: pci 0000:00:02.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 [ 0.335751] localhost kernel: pci 0000:00:02.4: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000 [ 0.335752] localhost kernel: pci 0000:00:02.5: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.335753] localhost kernel: pci 0000:00:02.6: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000 [ 0.335754] localhost kernel: pci 0000:00:02.7: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 [ 0.335755] localhost kernel: pci 0000:00:03.0: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000 [ 0.335757] localhost kernel: pci 0000:00:03.1: bridge window [io 0x1000-0x0fff] to [bus 0a] add_size 1000 [ 0.335758] localhost kernel: pci 0000:00:03.2: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000 [ 0.335760] localhost kernel: pci 0000:00:03.3: bridge window [io 0x1000-0x0fff] to [bus 0c] add_size 1000 [ 0.335762] localhost kernel: pci 0000:00:03.4: bridge window [io 0x1000-0x0fff] to [bus 0d] add_size 1000 [ 0.335763] localhost kernel: pci 0000:00:03.5: bridge window [io 0x1000-0x0fff] to [bus 0e] add_size 1000 [ 0.335775] localhost kernel: pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]: assigned [ 0.335776] localhost kernel: pci 0000:00:02.1: bridge window [io 0x2000-0x2fff]: assigned [ 0.335777] localhost kernel: pci 0000:00:02.2: bridge window [io 0x3000-0x3fff]: assigned [ 0.335778] localhost kernel: pci 0000:00:02.3: bridge window [io 0x4000-0x4fff]: assigned [ 0.335779] localhost kernel: pci 0000:00:02.4: bridge window [io 0x5000-0x5fff]: assigned [ 0.335780] localhost kernel: pci 0000:00:02.5: bridge window [io 0x7000-0x7fff]: assigned [ 0.335780] localhost kernel: pci 0000:00:02.6: bridge window [io 0x8000-0x8fff]: assigned [ 0.335781] localhost kernel: pci 0000:00:02.7: bridge window [io 0x9000-0x9fff]: assigned [ 0.335782] localhost kernel: pci 0000:00:03.0: bridge window [io 0xa000-0xafff]: assigned [ 0.335783] localhost kernel: pci 0000:00:03.1: bridge window [io 0xb000-0xbfff]: assigned [ 0.335784] localhost kernel: pci 0000:00:03.2: bridge window [io 0xc000-0xcfff]: assigned [ 0.335785] localhost kernel: pci 0000:00:03.3: bridge window [io 0xd000-0xdfff]: assigned [ 0.335787] localhost kernel: pci 0000:00:03.4: bridge window [io 0xe000-0xefff]: assigned [ 0.335788] localhost kernel: pci 0000:00:03.5: bridge window [io 0xf000-0xffff]: assigned [ 0.335791] localhost kernel: pci 0000:01:00.0: ROM [mem 0x82240000-0x8227ffff pref]: assigned [ 0.335792] localhost kernel: pci 0000:00:02.0: PCI bridge to [bus 01] [ 0.335806] localhost kernel: pci 0000:00:02.0: bridge window [io 0x1000-0x1fff] [ 0.337313] localhost kernel: pci 0000:00:02.0: bridge window [mem 0x82200000-0x823fffff] [ 0.338187] localhost kernel: pci 0000:00:02.0: bridge window [mem 0x7000000000-0x700fffffff 64bit pref] [ 0.340141] localhost kernel: pci 0000:00:02.1: PCI bridge to [bus 02] [ 0.340173] localhost kernel: pci 0000:00:02.1: bridge window [io 0x2000-0x2fff] [ 0.341590] localhost kernel: pci 0000:00:02.1: bridge window [mem 0x82000000-0x821fffff] [ 0.342518] localhost kernel: pci 0000:00:02.1: bridge window [mem 0x7010000000-0x701fffffff 64bit pref] [ 0.344543] localhost kernel: pci 0000:00:02.2: PCI bridge to [bus 03] [ 0.344551] localhost kernel: pci 0000:00:02.2: bridge window [io 0x3000-0x3fff] [ 0.345877] localhost kernel: pci 0000:00:02.2: bridge window [mem 0x81e00000-0x81ffffff] [ 0.346856] localhost kernel: pci 0000:00:02.2: bridge window [mem 0x7020000000-0x702fffffff 64bit pref] [ 0.349507] localhost kernel: pci 0000:00:02.3: PCI bridge to [bus 04] [ 0.349522] localhost kernel: pci 0000:00:02.3: bridge window [io 0x4000-0x4fff] [ 0.350309] localhost kernel: pci 0000:00:02.3: bridge window [mem 0x81c00000-0x81dfffff] [ 0.350849] localhost kernel: pci 0000:00:02.3: bridge window [mem 0x7030000000-0x703fffffff 64bit pref] [ 0.352023] localhost kernel: pci 0000:00:02.4: PCI bridge to [bus 05] [ 0.352057] localhost kernel: pci 0000:00:02.4: bridge window [io 0x5000-0x5fff] [ 0.353005] localhost kernel: pci 0000:00:02.4: bridge window [mem 0x81a00000-0x81bfffff] [ 0.353645] localhost kernel: pci 0000:00:02.4: bridge window [mem 0x7040000000-0x704fffffff 64bit pref] [ 0.355082] localhost kernel: pci 0000:00:02.5: PCI bridge to [bus 06] [ 0.355116] localhost kernel: pci 0000:00:02.5: bridge window [io 0x7000-0x7fff] [ 0.356625] localhost kernel: pci 0000:00:02.5: bridge window [mem 0x81800000-0x819fffff] [ 0.357578] localhost kernel: pci 0000:00:02.5: bridge window [mem 0x7050000000-0x705fffffff 64bit pref] [ 0.359181] localhost kernel: pci 0000:00:02.6: PCI bridge to [bus 07] [ 0.361319] localhost kernel: pci 0000:00:02.6: bridge window [io 0x8000-0x8fff] [ 0.362118] localhost kernel: pci 0000:00:02.6: bridge window [mem 0x81600000-0x817fffff] [ 0.362635] localhost kernel: pci 0000:00:02.6: bridge window [mem 0x7060000000-0x706fffffff 64bit pref] [ 0.364509] localhost kernel: pci 0000:00:02.7: PCI bridge to [bus 08] [ 0.364516] localhost kernel: pci 0000:00:02.7: bridge window [io 0x9000-0x9fff] [ 0.365256] localhost kernel: pci 0000:00:02.7: bridge window [mem 0x81400000-0x815fffff] [ 0.365768] localhost kernel: pci 0000:00:02.7: bridge window [mem 0x7070000000-0x707fffffff 64bit pref] [ 0.366885] localhost kernel: pci 0000:00:03.0: PCI bridge to [bus 09] [ 0.366917] localhost kernel: pci 0000:00:03.0: bridge window [io 0xa000-0xafff] [ 0.367786] localhost kernel: pci 0000:00:03.0: bridge window [mem 0x81200000-0x813fffff] [ 0.368355] localhost kernel: pci 0000:00:03.0: bridge window [mem 0x7080000000-0x708fffffff 64bit pref] [ 0.369611] localhost kernel: pci 0000:00:03.1: PCI bridge to [bus 0a] [ 0.369631] localhost kernel: pci 0000:00:03.1: bridge window [io 0xb000-0xbfff] [ 0.370518] localhost kernel: pci 0000:00:03.1: bridge window [mem 0x81000000-0x811fffff] [ 0.371090] localhost kernel: pci 0000:00:03.1: bridge window [mem 0x7090000000-0x709fffffff 64bit pref] [ 0.372440] localhost kernel: pci 0000:00:03.2: PCI bridge to [bus 0b] [ 0.372447] localhost kernel: pci 0000:00:03.2: bridge window [io 0xc000-0xcfff] [ 0.376453] localhost kernel: pci 0000:00:03.2: bridge window [mem 0x80e00000-0x80ffffff] [ 0.377010] localhost kernel: pci 0000:00:03.2: bridge window [mem 0x70a0000000-0x70afffffff 64bit pref] [ 0.378024] localhost kernel: pci 0000:00:03.3: PCI bridge to [bus 0c] [ 0.378032] localhost kernel: pci 0000:00:03.3: bridge window [io 0xd000-0xdfff] [ 0.378779] localhost kernel: pci 0000:00:03.3: bridge window [mem 0x80c00000-0x80dfffff] [ 0.379261] localhost kernel: pci 0000:00:03.3: bridge window [mem 0x70b0000000-0x70bfffffff 64bit pref] [ 0.380351] localhost kernel: pci 0000:00:03.4: PCI bridge to [bus 0d] [ 0.380372] localhost kernel: pci 0000:00:03.4: bridge window [io 0xe000-0xefff] [ 0.381169] localhost kernel: pci 0000:00:03.4: bridge window [mem 0x80a00000-0x80bfffff] [ 0.381722] localhost kernel: pci 0000:00:03.4: bridge window [mem 0x70c0000000-0x70cfffffff 64bit pref] [ 0.382717] localhost kernel: pci 0000:00:03.5: PCI bridge to [bus 0e] [ 0.382729] localhost kernel: pci 0000:00:03.5: bridge window [io 0xf000-0xffff] [ 0.383663] localhost kernel: pci 0000:00:03.5: bridge window [mem 0x80800000-0x809fffff] [ 0.384308] localhost kernel: pci 0000:00:03.5: bridge window [mem 0x70d0000000-0x70dfffffff 64bit pref] [ 0.385790] localhost kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.385792] localhost kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.385793] localhost kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.385794] localhost kernel: pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window] [ 0.385794] localhost kernel: pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.385795] localhost kernel: pci_bus 0000:00: resource 9 [mem 0x7000000000-0x77ffffffff window] [ 0.385801] localhost kernel: pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.385801] localhost kernel: pci_bus 0000:01: resource 1 [mem 0x82200000-0x823fffff] [ 0.385802] localhost kernel: pci_bus 0000:01: resource 2 [mem 0x7000000000-0x700fffffff 64bit pref] [ 0.385803] localhost kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.385804] localhost kernel: pci_bus 0000:02: resource 1 [mem 0x82000000-0x821fffff] [ 0.385804] localhost kernel: pci_bus 0000:02: resource 2 [mem 0x7010000000-0x701fffffff 64bit pref] [ 0.385805] localhost kernel: pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.385806] localhost kernel: pci_bus 0000:03: resource 1 [mem 0x81e00000-0x81ffffff] [ 0.385806] localhost kernel: pci_bus 0000:03: resource 2 [mem 0x7020000000-0x702fffffff 64bit pref] [ 0.385813] localhost kernel: pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.385813] localhost kernel: pci_bus 0000:04: resource 1 [mem 0x81c00000-0x81dfffff] [ 0.385814] localhost kernel: pci_bus 0000:04: resource 2 [mem 0x7030000000-0x703fffffff 64bit pref] [ 0.385815] localhost kernel: pci_bus 0000:05: resource 0 [io 0x5000-0x5fff] [ 0.385815] localhost kernel: pci_bus 0000:05: resource 1 [mem 0x81a00000-0x81bfffff] [ 0.385816] localhost kernel: pci_bus 0000:05: resource 2 [mem 0x7040000000-0x704fffffff 64bit pref] [ 0.385816] localhost kernel: pci_bus 0000:06: resource 0 [io 0x7000-0x7fff] [ 0.385817] localhost kernel: pci_bus 0000:06: resource 1 [mem 0x81800000-0x819fffff] [ 0.385817] localhost kernel: pci_bus 0000:06: resource 2 [mem 0x7050000000-0x705fffffff 64bit pref] [ 0.385818] localhost kernel: pci_bus 0000:07: resource 0 [io 0x8000-0x8fff] [ 0.385819] localhost kernel: pci_bus 0000:07: resource 1 [mem 0x81600000-0x817fffff] [ 0.385819] localhost kernel: pci_bus 0000:07: resource 2 [mem 0x7060000000-0x706fffffff 64bit pref] [ 0.385821] localhost kernel: pci_bus 0000:08: resource 0 [io 0x9000-0x9fff] [ 0.385821] localhost kernel: pci_bus 0000:08: resource 1 [mem 0x81400000-0x815fffff] [ 0.385822] localhost kernel: pci_bus 0000:08: resource 2 [mem 0x7070000000-0x707fffffff 64bit pref] [ 0.385823] localhost kernel: pci_bus 0000:09: resource 0 [io 0xa000-0xafff] [ 0.385824] localhost kernel: pci_bus 0000:09: resource 1 [mem 0x81200000-0x813fffff] [ 0.385825] localhost kernel: pci_bus 0000:09: resource 2 [mem 0x7080000000-0x708fffffff 64bit pref] [ 0.385826] localhost kernel: pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff] [ 0.385827] localhost kernel: pci_bus 0000:0a: resource 1 [mem 0x81000000-0x811fffff] [ 0.385828] localhost kernel: pci_bus 0000:0a: resource 2 [mem 0x7090000000-0x709fffffff 64bit pref] [ 0.385829] localhost kernel: pci_bus 0000:0b: resource 0 [io 0xc000-0xcfff] [ 0.385830] localhost kernel: pci_bus 0000:0b: resource 1 [mem 0x80e00000-0x80ffffff] [ 0.385831] localhost kernel: pci_bus 0000:0b: resource 2 [mem 0x70a0000000-0x70afffffff 64bit pref] [ 0.385834] localhost kernel: pci_bus 0000:0c: resource 0 [io 0xd000-0xdfff] [ 0.385835] localhost kernel: pci_bus 0000:0c: resource 1 [mem 0x80c00000-0x80dfffff] [ 0.385836] localhost kernel: pci_bus 0000:0c: resource 2 [mem 0x70b0000000-0x70bfffffff 64bit pref] [ 0.385836] localhost kernel: pci_bus 0000:0d: resource 0 [io 0xe000-0xefff] [ 0.385837] localhost kernel: pci_bus 0000:0d: resource 1 [mem 0x80a00000-0x80bfffff] [ 0.385840] localhost kernel: pci_bus 0000:0d: resource 2 [mem 0x70c0000000-0x70cfffffff 64bit pref] [ 0.385841] localhost kernel: pci_bus 0000:0e: resource 0 [io 0xf000-0xffff] [ 0.385841] localhost kernel: pci_bus 0000:0e: resource 1 [mem 0x80800000-0x809fffff] [ 0.385842] localhost kernel: pci_bus 0000:0e: resource 2 [mem 0x70d0000000-0x70dfffffff 64bit pref] [ 0.388448] localhost kernel: ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.389496] localhost kernel: PCI: CLS 0 bytes, default 64 [ 0.389523] localhost kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.389526] localhost kernel: software IO TLB: mapped [mem 0x0000000076fcd000-0x000000007afcd000] (64MB) [ 0.389597] localhost kernel: Trying to unpack rootfs image as initramfs... [ 0.402821] localhost kernel: ACPI: bus type thunderbolt registered [ 0.402978] localhost kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa772cf26, max_idle_ns: 440795269835 ns [ 0.460389] localhost kernel: Initialise system trusted keyrings [ 0.460428] localhost kernel: Key type blacklist registered [ 0.461204] localhost kernel: workingset: timestamp_bits=36 max_order=20 bucket_order=0 [ 0.461231] localhost kernel: zbud: loaded [ 0.462423] localhost kernel: integrity: Platform Keyring initialized [ 0.462831] localhost kernel: integrity: Machine keyring initialized [ 0.951518] localhost kernel: Freeing initrd memory: 149252K [ 0.954887] localhost kernel: alg: self-tests for sha256-ni (sha256) passed [ 0.955414] localhost kernel: alg: self-tests for hmac(sha256-ni) (hmac(sha256)) passed [ 0.955844] localhost kernel: basic hdkf test(hmac(sha256-ni)): hkdf_extract failed with -22 [ 0.961666] localhost kernel: NET: Registered PF_ALG protocol family [ 0.961677] localhost kernel: xor: automatically using best checksumming function avx [ 0.961680] localhost kernel: Key type asymmetric registered [ 0.961684] localhost kernel: Asymmetric key parser 'x509' registered [ 0.961718] localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.961765] localhost kernel: io scheduler mq-deadline registered [ 0.961766] localhost kernel: io scheduler kyber registered [ 0.961776] localhost kernel: io scheduler bfq registered [ 0.962275] localhost kernel: alg: self-tests for crct10dif-generic (crct10dif) passed [ 0.963218] localhost kernel: alg: self-tests for crc64-rocksoft-generic (crc64-rocksoft) passed [ 0.965710] localhost kernel: atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.965777] localhost kernel: alg: self-tests for sha1-ni (sha1) passed [ 0.966931] localhost kernel: pcieport 0000:00:02.0: PME: Signaling with IRQ 24 [ 0.967100] localhost kernel: pcieport 0000:00:02.0: AER: enabled with IRQ 24 [ 0.968130] localhost kernel: pcieport 0000:00:02.1: PME: Signaling with IRQ 25 [ 0.968265] localhost kernel: pcieport 0000:00:02.1: AER: enabled with IRQ 25 [ 0.969644] localhost kernel: pcieport 0000:00:02.2: PME: Signaling with IRQ 26 [ 0.969781] localhost kernel: pcieport 0000:00:02.2: AER: enabled with IRQ 26 [ 0.970988] localhost kernel: pcieport 0000:00:02.3: PME: Signaling with IRQ 27 [ 0.971130] localhost kernel: pcieport 0000:00:02.3: AER: enabled with IRQ 27 [ 0.972358] localhost kernel: pcieport 0000:00:02.4: PME: Signaling with IRQ 28 [ 0.972512] localhost kernel: pcieport 0000:00:02.4: AER: enabled with IRQ 28 [ 0.973667] localhost kernel: pcieport 0000:00:02.5: PME: Signaling with IRQ 29 [ 0.973799] localhost kernel: pcieport 0000:00:02.5: AER: enabled with IRQ 29 [ 0.975002] localhost kernel: pcieport 0000:00:02.6: PME: Signaling with IRQ 30 [ 0.975107] localhost kernel: pcieport 0000:00:02.6: AER: enabled with IRQ 30 [ 0.976277] localhost kernel: pcieport 0000:00:02.7: PME: Signaling with IRQ 31 [ 0.976424] localhost kernel: pcieport 0000:00:02.7: AER: enabled with IRQ 31 [ 0.976897] localhost kernel: ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.978252] localhost kernel: pcieport 0000:00:03.0: PME: Signaling with IRQ 32 [ 0.978386] localhost kernel: pcieport 0000:00:03.0: AER: enabled with IRQ 32 [ 0.979446] localhost kernel: pcieport 0000:00:03.1: PME: Signaling with IRQ 33 [ 0.979567] localhost kernel: pcieport 0000:00:03.1: AER: enabled with IRQ 33 [ 0.980703] localhost kernel: pcieport 0000:00:03.2: PME: Signaling with IRQ 34 [ 0.980858] localhost kernel: pcieport 0000:00:03.2: AER: enabled with IRQ 34 [ 0.981930] localhost kernel: pcieport 0000:00:03.3: PME: Signaling with IRQ 35 [ 0.982062] localhost kernel: pcieport 0000:00:03.3: AER: enabled with IRQ 35 [ 0.983106] localhost kernel: pcieport 0000:00:03.4: PME: Signaling with IRQ 36 [ 0.983243] localhost kernel: pcieport 0000:00:03.4: AER: enabled with IRQ 36 [ 0.984304] localhost kernel: pcieport 0000:00:03.5: PME: Signaling with IRQ 37 [ 0.984412] localhost kernel: pcieport 0000:00:03.5: AER: enabled with IRQ 37 [ 0.984754] localhost kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.984860] localhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.984916] localhost kernel: ACPI: button: Power Button [PWRF] [ 0.985179] localhost kernel: ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.990360] localhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.990947] localhost kernel: 00:00: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.991256] localhost kernel: Non-volatile memory driver v1.3 [ 0.997415] localhost kernel: rdac: device handler registered [ 0.997468] localhost kernel: hp_sw: device handler registered [ 0.997470] localhost kernel: emc: device handler registered [ 0.997480] localhost kernel: alua: device handler registered [ 0.998137] localhost kernel: xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.998176] localhost kernel: xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 0.998578] localhost kernel: xhci_hcd 0000:02:00.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 0.999189] localhost kernel: xhci_hcd 0000:02:00.0: xHCI Host Controller [ 0.999230] localhost kernel: xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 0.999231] localhost kernel: xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed [ 0.999301] localhost kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.14 [ 0.999303] localhost kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.999306] localhost kernel: usb usb1: Product: xHCI Host Controller [ 0.999307] localhost kernel: usb usb1: Manufacturer: Linux 5.14.0-611.30.1.el9_7.x86_64 xhci-hcd [ 0.999310] localhost kernel: usb usb1: SerialNumber: 0000:02:00.0 [ 0.999416] localhost kernel: hub 1-0:1.0: USB hub found [ 0.999485] localhost kernel: hub 1-0:1.0: 15 ports detected [ 0.999970] localhost kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.999981] localhost kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.14 [ 0.999983] localhost kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.999984] localhost kernel: usb usb2: Product: xHCI Host Controller [ 0.999984] localhost kernel: usb usb2: Manufacturer: Linux 5.14.0-611.30.1.el9_7.x86_64 xhci-hcd [ 0.999985] localhost kernel: usb usb2: SerialNumber: 0000:02:00.0 [ 1.000023] localhost kernel: hub 2-0:1.0: USB hub found [ 1.000073] localhost kernel: hub 2-0:1.0: 15 ports detected [ 1.000606] localhost kernel: usbcore: registered new interface driver usbserial_generic [ 1.000615] localhost kernel: usbserial: USB Serial support registered for generic [ 1.000670] localhost kernel: i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.001298] localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.001303] localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.001402] localhost kernel: mousedev: PS/2 mouse device common for all mice [ 1.001488] localhost kernel: rtc_cmos 00:03: RTC can wake from S4 [ 1.001920] localhost kernel: rtc_cmos 00:03: registered as rtc0 [ 1.001980] localhost kernel: rtc_cmos 00:03: setting system clock to 2026-02-12T10:15:41 UTC (1770891341) [ 1.002041] localhost kernel: rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram [ 1.002059] localhost kernel: intel_pstate: CPU model not supported [ 1.002521] localhost kernel: efifb: probing for efifb [ 1.002534] localhost kernel: efifb: framebuffer at 0x80000000, using 4000k, total 4000k [ 1.002535] localhost kernel: efifb: mode is 1280x800x32, linelength=5120, pages=1 [ 1.002537] localhost kernel: efifb: scrolling: redraw [ 1.002537] localhost kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.004289] localhost kernel: Console: switching to colour frame buffer device 160x50 [ 1.004781] localhost kernel: fb0: EFI VGA frame buffer device [ 1.004803] localhost kernel: EFI Variables Facility v0.08 2004-May-17 [ 1.007189] localhost kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.009731] localhost kernel: hid: raw HID events driver (C) Jiri Kosina [ 1.009799] localhost kernel: usbcore: registered new interface driver usbhid [ 1.009800] localhost kernel: usbhid: USB HID core driver [ 1.009848] localhost kernel: drop_monitor: Initializing network drop monitor service [ 1.021408] localhost kernel: Initializing XFRM netlink socket [ 1.021445] localhost kernel: NET: Registered PF_INET6 protocol family [ 1.024324] localhost kernel: alg: self-tests for hmac(sha1-ni) (hmac(sha1)) passed [ 1.024858] localhost kernel: Segment Routing with IPv6 [ 1.024897] localhost kernel: NET: Registered PF_PACKET protocol family [ 1.024942] localhost kernel: mpls_gso: MPLS GSO support [ 1.026068] localhost kernel: IPI shorthand broadcast: enabled [ 1.026109] localhost kernel: AVX2 version of gcm_enc/dec engaged. [ 1.026850] localhost kernel: AES CTR mode by8 optimization enabled [ 1.026936] localhost kernel: sched_clock: Marking stable (929003070, 97808272)->(1169466284, -142654942) [ 1.027918] localhost kernel: registered taskstats version 1 [ 1.028773] localhost kernel: Loading compiled-in X.509 certificates [ 1.028942] localhost kernel: alg: self-tests for sha512-avx2 (sha512) passed [ 1.029841] localhost kernel: alg: self-tests for rsa-generic (rsa) passed [ 1.030323] localhost kernel: alg: self-tests for pkcs1pad(rsa-generic,sha512) (pkcs1pad(rsa,sha512)) passed [ 1.031162] localhost kernel: Loaded X.509 cert 'Red Hat Enterprise Linux kernel signing key: 1c481550d104e1bdf273c7948d5777a8e4a56f5b' [ 1.031282] localhost kernel: alg: self-tests for pkcs1pad(rsa-generic,sha256) (pkcs1pad(rsa,sha256)) passed [ 1.031469] localhost kernel: Loaded X.509 cert 'Red Hat Enterprise Linux Driver Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80' [ 1.031644] localhost kernel: Loaded X.509 cert 'Red Hat Enterprise Linux kpatch signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8' [ 1.031735] localhost kernel: Loaded X.509 cert 'RH-IMA-CA: Red Hat IMA CA: fb31825dd0e073685b264e3038963673f753959a' [ 1.031739] localhost kernel: Loaded X.509 cert 'Nvidia GPU OOT signing 001: 55e1cef88193e60419f0b0ec379c49f77545acf0' [ 1.033617] localhost kernel: Demotion targets for Node 0: null [ 1.033622] localhost kernel: page_owner is disabled [ 1.033695] localhost kernel: Key type .fscrypt registered [ 1.033696] localhost kernel: Key type fscrypt-provisioning registered [ 1.033724] localhost kernel: Key type big_key registered [ 1.037398] localhost kernel: Key type trusted registered [ 1.039433] localhost kernel: alg: self-tests for aes-aesni (aes) passed [ 1.039939] localhost kernel: alg: self-tests for cbc(aes-aesni) (cbc(aes)) passed [ 1.040464] localhost kernel: Key type encrypted registered [ 1.040793] localhost kernel: integrity: Loading X.509 certificate: UEFI:db [ 1.040816] localhost kernel: integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 1.040819] localhost kernel: integrity: Loading X.509 certificate: UEFI:db [ 1.040828] localhost kernel: integrity: Loaded X.509 cert 'Microsoft Corporation: Windows UEFI CA 2023: aefc5fbbbe055d8f8daa585473499417ab5a5272' [ 1.040829] localhost kernel: integrity: Loading X.509 certificate: UEFI:db [ 1.040857] localhost kernel: integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 1.040858] localhost kernel: integrity: Loading X.509 certificate: UEFI:db [ 1.040864] localhost kernel: integrity: Loaded X.509 cert 'Microsoft UEFI CA 2023: 81aa6b3244c935bce0d6628af39827421e32497d' [ 1.041797] localhost kernel: integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 1.041902] localhost kernel: integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 1.041989] localhost kernel: integrity: Loaded X.509 cert 'Red Hat Secure Boot CA 5: cc6fa5e72868ba494e939bbd680b9144769a9f8f' [ 1.041990] localhost kernel: integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 1.042290] localhost kernel: integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 1.042576] localhost kernel: integrity: Loaded X.509 cert 'Red Hat Secure Boot CA 8: e1c6c580aa1e21d585aad9bf20f3929e5ec1f08b' [ 1.042588] localhost kernel: Loading compiled-in module X.509 certificates [ 1.042778] localhost kernel: Loaded X.509 cert 'Red Hat Enterprise Linux kernel signing key: 1c481550d104e1bdf273c7948d5777a8e4a56f5b' [ 1.042780] localhost kernel: ima: Allocated hash algorithm: sha256 [ 1.054682] localhost kernel: audit: type=1807 audit(1770891341.552:2): action=measure func=KEXEC_KERNEL_CHECK res=1 [ 1.054683] localhost kernel: evm: Initialising EVM extended attributes: [ 1.054685] localhost kernel: evm: security.selinux [ 1.054686] localhost kernel: audit: type=1807 audit(1770891341.552:3): action=measure func=MODULE_CHECK res=1 [ 1.054686] localhost kernel: evm: security.SMACK64 (disabled) [ 1.054687] localhost kernel: evm: security.SMACK64EXEC (disabled) [ 1.054689] localhost kernel: evm: security.SMACK64TRANSMUTE (disabled) [ 1.054690] localhost kernel: evm: security.SMACK64MMAP (disabled) [ 1.054690] localhost kernel: evm: security.apparmor (disabled) [ 1.054690] localhost kernel: evm: security.ima [ 1.054690] localhost kernel: evm: security.capability [ 1.054691] localhost kernel: evm: HMAC attrs: 0x1 [ 1.057204] localhost kernel: alg: self-tests for generic-gcm-aesni (gcm(aes)) passed [ 1.059511] localhost kernel: alg: self-tests for rfc4106-gcm-aesni (rfc4106(gcm(aes))) passed [ 1.061347] localhost kernel: alg: self-tests for xts-aes-aesni (xts(aes)) passed [ 1.063097] localhost kernel: alg: self-tests for ctr-aes-aesni (ctr(aes)) passed [ 1.064748] localhost kernel: alg: self-tests for cts-cbc-aes-aesni (cts(cbc(aes))) passed [ 1.066392] localhost kernel: alg: self-tests for cbc-aes-aesni (cbc(aes)) passed [ 1.067992] localhost kernel: alg: self-tests for ecb-aes-aesni (ecb(aes)) passed [ 1.068008] localhost kernel: alg: self-tests for jitterentropy_rng (jitterentropy_rng) passed [ 1.068018] localhost kernel: alg: poly1305 (poly1305-simd) is disabled due to FIPS [ 1.068095] localhost kernel: alg: self-tests for sha384-avx2 (sha384) passed [ 1.068181] localhost kernel: alg: self-tests for sha384-avx (sha384) passed [ 1.068275] localhost kernel: alg: self-tests for sha512-avx (sha512) passed [ 1.068366] localhost kernel: alg: self-tests for sha384-ssse3 (sha384) passed [ 1.068445] localhost kernel: alg: self-tests for sha512-ssse3 (sha512) passed [ 1.068500] localhost kernel: alg: self-tests for sha224-ni (sha224) passed [ 1.068583] localhost kernel: alg: self-tests for sha224-avx2 (sha224) passed [ 1.068657] localhost kernel: alg: self-tests for sha256-avx2 (sha256) passed [ 1.068754] localhost kernel: alg: self-tests for sha224-avx (sha224) passed [ 1.068847] localhost kernel: alg: self-tests for sha256-avx (sha256) passed [ 1.068933] localhost kernel: alg: self-tests for sha224-ssse3 (sha224) passed [ 1.069032] localhost kernel: alg: self-tests for sha256-ssse3 (sha256) passed [ 1.069099] localhost kernel: alg: self-tests for sha1-avx2 (sha1) passed [ 1.069184] localhost kernel: alg: self-tests for sha1-avx (sha1) passed [ 1.069256] localhost kernel: alg: self-tests for sha1-ssse3 (sha1) passed [ 1.069270] localhost kernel: alg: xchacha12 (xchacha12-simd) is disabled due to FIPS [ 1.069278] localhost kernel: alg: xchacha20 (xchacha20-simd) is disabled due to FIPS [ 1.069298] localhost kernel: alg: chacha20 (chacha20-simd) is disabled due to FIPS [ 1.069311] localhost kernel: alg: ecdh-nist-p384 (ecdh-nist-p384-generic) is disabled due to FIPS [ 1.069320] localhost kernel: alg: ecdh-nist-p256 (ecdh-nist-p256-generic) is disabled due to FIPS [ 1.069345] localhost kernel: alg: ecdh-nist-p192 (ecdh-nist-p192-generic) is disabled due to FIPS [ 1.069357] localhost kernel: alg: ghash (ghash-generic) is disabled due to FIPS [ 1.071049] localhost kernel: alg: self-tests for hmac(sha512-avx2) (hmac(sha512)) passed [ 1.071083] localhost kernel: alg: self-tests for drbg_nopr_hmac_sha512 (stdrng) passed [ 1.071122] localhost kernel: alg: self-tests for drbg_nopr_hmac_sha256 (stdrng) passed [ 1.071162] localhost kernel: alg: self-tests for drbg_nopr_hmac_sha1 (stdrng) passed [ 1.071191] localhost kernel: alg: self-tests for drbg_nopr_sha256 (stdrng) passed [ 1.071214] localhost kernel: alg: self-tests for drbg_nopr_sha512 (stdrng) passed [ 1.071233] localhost kernel: alg: self-tests for drbg_nopr_sha1 (stdrng) passed [ 1.071259] localhost kernel: alg: self-tests for drbg_nopr_ctr_aes256 (stdrng) passed [ 1.071277] localhost kernel: alg: self-tests for drbg_nopr_ctr_aes192 (stdrng) passed [ 1.071303] localhost kernel: alg: self-tests for drbg_nopr_ctr_aes128 (stdrng) passed [ 1.071323] localhost kernel: alg: self-tests for drbg_pr_hmac_sha512 (stdrng) passed [ 1.071367] localhost kernel: alg: self-tests for drbg_pr_hmac_sha256 (stdrng) passed [ 1.071395] localhost kernel: alg: self-tests for drbg_pr_hmac_sha1 (stdrng) passed [ 1.071429] localhost kernel: alg: self-tests for drbg_pr_sha256 (stdrng) passed [ 1.071447] localhost kernel: alg: self-tests for drbg_pr_sha512 (stdrng) passed [ 1.071474] localhost kernel: alg: self-tests for drbg_pr_sha1 (stdrng) passed [ 1.071484] localhost kernel: alg: self-tests for drbg_pr_ctr_aes256 (stdrng) passed [ 1.071503] localhost kernel: alg: self-tests for drbg_pr_ctr_aes192 (stdrng) passed [ 1.071533] localhost kernel: alg: self-tests for drbg_pr_ctr_aes128 (stdrng) passed [ 1.071582] localhost kernel: alg: self-tests for lzo-rle-scomp (lzo-rle) passed [ 1.071605] localhost kernel: alg: self-tests for lzo-rle-generic (lzo-rle) passed [ 1.071635] localhost kernel: alg: self-tests for lzo-scomp (lzo) passed [ 1.071646] localhost kernel: alg: self-tests for lzo-generic (lzo) passed [ 1.071729] localhost kernel: alg: self-tests for crc32c-generic (crc32c) passed [ 1.071989] localhost kernel: alg: self-tests for zlib-deflate-scomp (zlib-deflate) passed [ 1.072063] localhost kernel: alg: self-tests for deflate-scomp (deflate) passed [ 1.072245] localhost kernel: alg: self-tests for deflate-generic (deflate) passed [ 1.072269] localhost kernel: alg: self-tests for aes-generic (aes) passed [ 1.072403] localhost kernel: alg: self-tests for sha3-512-generic (sha3-512) passed [ 1.072503] localhost kernel: alg: self-tests for sha3-384-generic (sha3-384) passed [ 1.072588] localhost kernel: alg: self-tests for sha3-256-generic (sha3-256) passed [ 1.072672] localhost kernel: alg: self-tests for sha3-224-generic (sha3-224) passed [ 1.072769] localhost kernel: alg: self-tests for sha384-generic (sha384) passed [ 1.072885] localhost kernel: alg: self-tests for sha512-generic (sha512) passed [ 1.073017] localhost kernel: alg: self-tests for sha224-generic (sha224) passed [ 1.073156] localhost kernel: alg: self-tests for sha256-generic (sha256) passed [ 1.073259] localhost kernel: alg: self-tests for sha1-generic (sha1) passed [ 1.073273] localhost kernel: alg: md5 (md5-generic) is disabled due to FIPS [ 1.073283] localhost kernel: alg: self-tests for ecb-cipher_null (ecb(cipher_null)) passed [ 1.073294] localhost kernel: alg: digest_null (digest_null-generic) is disabled due to FIPS [ 1.073327] localhost kernel: alg: compress_null (compress_null-generic) is disabled due to FIPS [ 1.073352] localhost kernel: alg: self-tests for cipher_null-generic (cipher_null) passed [ 1.080903] localhost kernel: alg: self-tests for ecdsa-nist-p384-generic (ecdsa-nist-p384) passed [ 1.084020] localhost kernel: alg: self-tests for ecdsa-nist-p256-generic (ecdsa-nist-p256) passed [ 1.084032] localhost kernel: alg: ecdsa-nist-p192 (ecdsa-nist-p192-generic) is disabled due to FIPS [ 1.084041] localhost kernel: alg: dh (dh-generic) is disabled due to FIPS [ 1.085221] localhost kernel: Running certificate verification RSA selftest [ 1.085528] localhost kernel: Loaded X.509 cert 'Certificate verification self-testing key: f58703bb33ce1b73ee02eccdee5b8817518fe3db' [ 1.085817] localhost kernel: Running certificate verification ECDSA selftest [ 1.086437] localhost kernel: Loaded X.509 cert 'Certificate verification ECDSA self-testing key: 2900bcea1deb7bc8479a84a23d758efdfdd2b2d3' [ 1.096603] localhost kernel: Lockdown: swapper/0: hibernation is restricted; see man kernel_lockdown.7 [ 1.096650] localhost kernel: clk: Disabling unused clocks [ 1.110022] localhost kernel: Freeing unused decrypted memory: 2028K [ 1.112137] localhost kernel: Freeing unused kernel image (initmem) memory: 4076K [ 1.112202] localhost kernel: Write protecting the kernel read-only data: 30720k [ 1.113429] localhost kernel: Freeing unused kernel image (rodata/data gap) memory: 324K [ 1.119027] localhost kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.119038] localhost kernel: Run /init as init process [ 1.119058] localhost kernel: with arguments: [ 1.119060] localhost kernel: /init [ 1.119061] localhost kernel: with environment: [ 1.119061] localhost kernel: HOME=/ [ 1.119062] localhost kernel: TERM=linux [ 1.119063] localhost kernel: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-upgrade.x86_64 [ 1.119064] localhost kernel: boot=UUID=a9954e16-2e8a-4de1-ab29-2ca6943b850b [ 1.135026] localhost systemd[1]: systemd 252-55.el9_7.7 running in system mode (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN -IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 1.135121] localhost systemd[1]: Detected virtualization kvm. [ 1.135130] localhost systemd[1]: Detected architecture x86-64. [ 1.135132] localhost systemd[1]: Running in initrd. [ 1.139500] localhost systemd[1]: No hostname configured, using default hostname. [ 1.139553] localhost systemd[1]: Hostname set to . [ 1.139626] localhost systemd[1]: Initializing machine ID from VM UUID. [ 1.182148] localhost systemd-cryptsetup-generator[218]: Not creating device 'luks-da585fa3-1b96-4e27-bd1e-8e6bfd8b4000' because it was not specified on the kernel command line. [ 1.183394] localhost systemd-cryptsetup-generator[218]: Not creating device 'luks-c32cdc66-3697-416b-8563-3e0f677ab6fe' because it was not specified on the kernel command line. [ 1.184430] localhost systemd-cryptsetup-generator[218]: Not creating device 'luks-aab625bb-4f80-4f26-97be-10a28f75ffc9' because it was not specified on the kernel command line. [ 1.185459] localhost systemd-cryptsetup-generator[218]: Not creating device 'luks-d3542a15-11ba-4e6e-85b8-ed646e3c8425' because it was not specified on the kernel command line. [ 1.186428] localhost systemd-cryptsetup-generator[218]: Not creating device 'luks-b8e94c2d-855e-43bf-9511-2d530dacfb51' because it was not specified on the kernel command line. [ 1.187389] localhost systemd-cryptsetup-generator[218]: Not creating device 'luks-aecc6a62-900f-4bf5-9808-33f54c76499b' because it was not specified on the kernel command line. [ 1.240830] localhost kernel: usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.297302] localhost systemd[1]: OnFailureIsolate is deprecated. Please use OnFailureJobMode= instead [ 1.311481] localhost systemd[1]: Queued start job for default target System Upgrade. [ 1.321292] localhost systemd[1]: Created slice Slice /system/systemd-cryptsetup. [ 1.322479] localhost systemd[1]: Created slice Slice /system/systemd-fsck. [ 1.323519] localhost systemd[1]: Created slice Slice /system/systemd-hibernate-resume. [ 1.324496] localhost systemd[1]: Started Forward Password Requests to Clevis Directory Watch. [ 1.325541] localhost systemd[1]: Reached target Local Encrypted Volumes (Pre). [ 1.326481] localhost systemd[1]: Reached target Initrd /usr File System. [ 1.327246] localhost systemd[1]: Reached target Slice Units. [ 1.327877] localhost systemd[1]: Reached target Timer Units. [ 1.328628] localhost systemd[1]: Listening on D-Bus System Message Bus Socket. [ 1.329489] localhost systemd[1]: Listening on Open-iSCSI iscsid Socket. [ 1.330244] localhost systemd[1]: Listening on Open-iSCSI iscsiuio Socket. [ 1.331053] localhost systemd[1]: Listening on Journal Socket (/dev/log). [ 1.331850] localhost systemd[1]: Listening on Journal Socket. [ 1.332533] localhost systemd[1]: Listening on udev Control Socket. [ 1.333257] localhost systemd[1]: Listening on udev Kernel Socket. [ 1.333936] localhost systemd[1]: Reached target Socket Units. [ 1.348072] localhost systemd[1]: Starting Create List of Static Device Nodes... [ 1.349942] localhost systemd[1]: Starting Journal Service... [ 1.352947] localhost systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met. [ 1.354112] localhost systemd[1]: Starting Apply Kernel Variables... [ 1.355298] localhost systemd[1]: Starting Create System Users... [ 1.356718] localhost systemd[1]: Starting Setup Virtual Console... [ 1.357949] localhost systemd[1]: Finished Create List of Static Device Nodes. [ 1.368084] localhost kernel: usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 [ 1.368090] localhost kernel: usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 [ 1.368091] localhost kernel: usb 1-1: Product: QEMU USB Tablet [ 1.368092] localhost kernel: usb 1-1: Manufacturer: QEMU [ 1.368093] localhost kernel: usb 1-1: SerialNumber: 28754-0000:00:02.1:00.0-1 [ 1.368538] localhost kernel: input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:02.1/0000:02:00.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4 [ 1.368594] localhost kernel: hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:02:00.0-1/input0 [ 1.307170] localhost systemd-journald[261]: Journal started [ 1.307202] localhost systemd-journald[261]: Runtime Journal (/run/log/journal/6f914a1506404c5994a80def02800817) is 8.0M, max 77.8M, 69.8M free. [ 1.405116] localhost systemd[1]: Started Journal Service. [ 1.321365] localhost systemd[1]: Finished Setup Virtual Console. [ 1.321480] localhost systemd[1]: dracut ask for additional cmdline parameters was skipped because no trigger condition checks were met. [ 1.326799] localhost systemd[1]: Starting dracut cmdline hook... [ 1.329492] localhost systemd-sysusers[263]: Creating group 'users' with GID 100. [ 1.333334] localhost systemd-sysusers[263]: Creating group 'dbus' with GID 81. [ 1.333962] localhost systemd-sysusers[263]: Creating user 'dbus' (System Message Bus) with UID 81 and GID 81. [ 1.336208] localhost systemd[1]: Finished Apply Kernel Variables. [ 1.336478] localhost systemd[1]: Finished Create System Users. [ 1.337617] localhost dracut-cmdline[268]: dracut-9.7 (Plow) dracut-057-104.git20250919.el9_7 [ 1.339181] localhost dracut-cmdline[268]: Using kernel command line parameters: BOOT_IMAGE=(hd0,gpt2)/vmlinuz-upgrade.x86_64 root=UUID=ab0ebddf-3c19-424b-ae64-1b731dfb0a1f ro boot=UUID=a9954e16-2e8a-4de1-ab29-2ca6943b850b resume=/dev/mapper/luks-e983569c-1255-44dd-8201-6de51ca5385d rd.luks.uuid=luks-522b7104-47c1-4300-b49a-f5603cddea77 rd.lvm.lv=rhel/root rd.luks.uuid=luks-e983569c-1255-44dd-8201-6de51ca5385d rd.lvm.lv=rhel/swap fips=1 console=ttyS0,115200n8 enforcing=0 net.naming-scheme=rhel-8.0 plymouth.enable=0 rd.plymouth=0 [ 1.340159] localhost systemd[1]: Starting Create Static Device Nodes in /dev... [ 1.343032] localhost systemd[1]: Starting Create Volatile Files and Directories... [ 1.375633] localhost systemd[1]: Finished Create Static Device Nodes in /dev. [ 1.383699] localhost systemd[1]: Finished Create Volatile Files and Directories. [ 1.419823] localhost systemd-escape[341]: Input 'UUID=522b7104-47c1-4300-b49a-f5603cddea77' is not an absolute file system path, escaping is likely not going to be reversible. [ 1.450202] localhost systemd-escape[351]: Input 'UUID=da585fa3-1b96-4e27-bd1e-8e6bfd8b4000' is not an absolute file system path, escaping is likely not going to be reversible. [ 1.480422] localhost systemd-escape[361]: Input 'UUID=c32cdc66-3697-416b-8563-3e0f677ab6fe' is not an absolute file system path, escaping is likely not going to be reversible. [ 1.510099] localhost systemd-escape[371]: Input 'UUID=aab625bb-4f80-4f26-97be-10a28f75ffc9' is not an absolute file system path, escaping is likely not going to be reversible. [ 1.540019] localhost systemd-escape[381]: Input 'UUID=d3542a15-11ba-4e6e-85b8-ed646e3c8425' is not an absolute file system path, escaping is likely not going to be reversible. [ 1.570164] localhost systemd-escape[391]: Input 'UUID=b8e94c2d-855e-43bf-9511-2d530dacfb51' is not an absolute file system path, escaping is likely not going to be reversible. [ 1.600372] localhost systemd-escape[401]: Input 'UUID=aecc6a62-900f-4bf5-9808-33f54c76499b' is not an absolute file system path, escaping is likely not going to be reversible. [ 1.629899] localhost systemd-escape[411]: Input 'UUID=e983569c-1255-44dd-8201-6de51ca5385d' is not an absolute file system path, escaping is likely not going to be reversible. [ 1.660135] localhost systemd-escape[422]: Input 'luks-522b7104-47c1-4300-b49a-f5603cddea77' is not an absolute file system path, escaping is likely not going to be reversible. [ 1.686609] localhost systemd-escape[429]: Input 'luks-e983569c-1255-44dd-8201-6de51ca5385d' is not an absolute file system path, escaping is likely not going to be reversible. [ 1.863289] localhost kernel: input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 1.865150] localhost kernel: Loading iSCSI transport class v2.0-870. [ 1.872140] localhost kernel: iscsi: registered transport (tcp) [ 1.886738] localhost kernel: Warning: Deprecated Driver is detected: qla4xxx will not be maintained in a future major release and may be disabled [ 1.890977] localhost kernel: Warning: Deprecated Driver is detected: qla4xxx_module_init will not be maintained in a future major release and may be disabled [ 1.891856] localhost kernel: iscsi: registered transport (qla4xxx) [ 1.892201] localhost kernel: QLogic iSCSI HBA Driver [ 1.897078] localhost kernel: libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015) [ 1.930983] localhost kernel: Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015) [ 1.931441] localhost kernel: iscsi: registered transport (cxgb4i) [ 1.936891] localhost kernel: Warning: Deprecated Driver is detected: cnic will not be maintained in a future major release and may be disabled [ 1.938401] localhost kernel: Warning: Deprecated Driver is detected: cnic_init will not be maintained in a future major release and may be disabled [ 1.938404] localhost kernel: cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 1.942622] localhost kernel: Warning: Deprecated Driver is detected: bnx2i will not be maintained in a future major release and may be disabled [ 1.943792] localhost kernel: Warning: Deprecated Driver is detected: bnx2i_mod_init will not be maintained in a future major release and may be disabled [ 1.943796] localhost kernel: QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 1.943841] localhost kernel: iscsi: registered transport (bnx2i) [ 1.952234] localhost kernel: iscsi: registered transport (be2iscsi) [ 1.952240] localhost kernel: In beiscsi_module_init, tt=000000002c2b64d4 [ 1.929876] localhost systemd[1]: Finished dracut cmdline hook. [ 1.933237] localhost systemd[1]: Starting dracut pre-udev hook... [ 1.939024] localhost dracut-pre-udev[517]: fips-load-crypto: start [ 1.939910] localhost dracut-pre-udev[517]: Loading and integrity checking all crypto modules [ 2.040624] localhost kernel: alg: self-tests for crc32c-intel (crc32c) passed [ 2.042909] localhost kernel: alg: self-tests for crct10dif-pclmul (crct10dif) passed [ 2.045120] localhost kernel: alg: ghash (ghash-clmulni) is disabled due to FIPS [ 2.048309] localhost kernel: alg: des3_ede (des3_ede-asm) is disabled due to FIPS [ 2.048758] localhost kernel: alg: ecb(des3_ede) (ecb-des3_ede-asm) is disabled due to FIPS [ 2.049265] localhost kernel: alg: cbc(des3_ede) (cbc-des3_ede-asm) is disabled due to FIPS [ 2.050305] localhost kernel: alg: des (des-generic) is disabled due to FIPS [ 2.050752] localhost kernel: alg: des3_ede (des3_ede-generic) is disabled due to FIPS [ 2.082516] localhost kernel: alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 1.989396] localhost dracut-pre-udev[517]: Self testing crypto algorithms [ 2.091032] localhost kernel: alg: self-tests for sha1 (sha1) passed [ 2.091404] localhost kernel: alg: self-tests for sha256 (sha256) passed [ 2.091791] localhost kernel: alg: self-tests for ecb(aes) (ecb(aes)) passed [ 2.092205] localhost kernel: alg: self-tests for cbc(aes) (cbc(aes)) passed [ 2.092608] localhost kernel: alg: self-tests for xts(aes) (xts(aes)) passed [ 2.093029] localhost kernel: alg: self-tests for ctr(aes) (ctr(aes)) passed [ 2.095345] localhost kernel: alg: self-tests for rfc3686(ctr-aes-aesni) (rfc3686(ctr(aes))) passed [ 2.095932] localhost kernel: alg: self-tests for rfc3686(ctr(aes)) (rfc3686(ctr(aes))) passed [ 2.098232] localhost kernel: alg: self-tests for ofb(aes-aesni) (ofb(aes)) passed [ 2.098682] localhost kernel: alg: self-tests for ofb(aes) (ofb(aes)) passed [ 2.100798] localhost kernel: alg: self-tests for cfb(aes-aesni) (cfb(aes)) passed [ 2.101269] localhost kernel: alg: self-tests for cfb(aes) (cfb(aes)) passed [ 2.101769] localhost kernel: alg: self-tests for sha384 (sha384) passed [ 2.102228] localhost kernel: alg: self-tests for sha512 (sha512) passed [ 2.102844] localhost kernel: alg: self-tests for deflate (deflate) passed [ 2.103273] localhost kernel: alg: self-tests for crc32c (crc32c) passed [ 2.103684] localhost kernel: alg: self-tests for sha224 (sha224) passed [ 2.104243] localhost kernel: alg: self-tests for gcm(aes) (gcm(aes)) passed [ 2.104629] localhost kernel: alg: self-tests for lzo (lzo) passed [ 2.108554] localhost kernel: alg: cbcmac(aes) (cbcmac(aes-aesni)) is disabled due to FIPS [ 2.109360] localhost kernel: alg: self-tests for ccm_base(ctr-aes-aesni,cbcmac(aes-aesni)) (ccm(aes)) passed [ 2.110202] localhost kernel: alg: self-tests for ccm(aes) (ccm(aes)) passed [ 2.110630] localhost kernel: alg: self-tests for cts(cbc(aes)) (cts(cbc(aes))) passed [ 2.112378] localhost kernel: alg: self-tests for xxhash64-generic (xxhash64) passed [ 2.113830] localhost kernel: alg: self-tests for xxhash64 (xxhash64) passed [ 2.116193] localhost kernel: alg: self-tests for rfc4309(ccm_base(ctr-aes-aesni,cbcmac(aes-aesni))) (rfc4309(ccm(aes))) passed [ 2.117253] localhost kernel: alg: self-tests for rfc4309(ccm(aes)) (rfc4309(ccm(aes))) passed [ 2.117775] localhost kernel: alg: self-tests for crct10dif (crct10dif) passed [ 2.118287] localhost kernel: alg: self-tests for sha3-224 (sha3-224) passed [ 2.118759] localhost kernel: alg: self-tests for sha3-256 (sha3-256) passed [ 2.119247] localhost kernel: alg: self-tests for sha3-384 (sha3-384) passed [ 2.119751] localhost kernel: alg: self-tests for sha3-512 (sha3-512) passed [ 2.120209] localhost kernel: alg: self-tests for hmac(sha1) (hmac(sha1)) passed [ 2.120710] localhost kernel: alg: self-tests for hmac(sha256) (hmac(sha256)) passed [ 2.123156] localhost kernel: alg: self-tests for hmac(sha384-avx2) (hmac(sha384)) passed [ 2.123721] localhost kernel: alg: self-tests for hmac(sha384) (hmac(sha384)) passed [ 2.124208] localhost kernel: alg: self-tests for hmac(sha512) (hmac(sha512)) passed [ 2.126475] localhost kernel: alg: self-tests for hmac(sha224-ni) (hmac(sha224)) passed [ 2.126947] localhost kernel: alg: self-tests for hmac(sha224) (hmac(sha224)) passed [ 2.129077] localhost kernel: alg: self-tests for hmac(sha3-224-generic) (hmac(sha3-224)) passed [ 2.129679] localhost kernel: alg: self-tests for hmac(sha3-224) (hmac(sha3-224)) passed [ 2.131899] localhost kernel: alg: self-tests for hmac(sha3-256-generic) (hmac(sha3-256)) passed [ 2.132575] localhost kernel: alg: self-tests for hmac(sha3-256) (hmac(sha3-256)) passed [ 2.134896] localhost kernel: alg: self-tests for hmac(sha3-384-generic) (hmac(sha3-384)) passed [ 2.135548] localhost kernel: alg: self-tests for hmac(sha3-384) (hmac(sha3-384)) passed [ 2.137973] localhost kernel: alg: self-tests for hmac(sha3-512-generic) (hmac(sha3-512)) passed [ 2.138636] localhost kernel: alg: self-tests for hmac(sha3-512) (hmac(sha3-512)) passed [ 2.139596] localhost kernel: alg: self-tests for rfc4106(gcm(aes)) (rfc4106(gcm(aes))) passed [ 2.141743] localhost kernel: alg: self-tests for cmac(aes-aesni) (cmac(aes)) passed [ 2.142203] localhost kernel: alg: self-tests for cmac(aes) (cmac(aes)) passed [ 2.144317] localhost kernel: alg: self-tests for authenc(hmac(sha1-ni),cbc-aes-aesni) (authenc(hmac(sha1),cbc(aes))) passed [ 2.145066] localhost kernel: alg: self-tests for authenc(hmac(sha1),cbc(aes)) (authenc(hmac(sha1),cbc(aes))) passed [ 2.270130] localhost kernel: alg: self-tests for ffdhe2048(dh-generic) (ffdhe2048(dh)) passed [ 2.393956] localhost kernel: alg: self-tests for ffdhe2048(dh) (ffdhe2048(dh)) passed [ 2.300400] localhost dracut-pre-udev[517]: fips-load-crypto: done! [ 2.408380] localhost kernel: device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 2.409169] localhost kernel: device-mapper: uevent: version 1.0.3 [ 2.409531] localhost kernel: device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev [ 2.453877] localhost kernel: RPC: Registered named UNIX socket transport module. [ 2.453882] localhost kernel: RPC: Registered udp transport module. [ 2.453885] localhost kernel: RPC: Registered tcp transport module. [ 2.453886] localhost kernel: RPC: Registered tcp-with-tls transport module. [ 2.453887] localhost kernel: RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.433705] localhost rpc.statd[665]: Version 2.5.4 starting [ 2.434864] localhost rpc.statd[665]: Initializing NSM state [ 2.463033] localhost rpc.idmapd[669]: Setting log level to 0 [ 2.469542] localhost systemd[1]: Finished dracut pre-udev hook. [ 2.481314] localhost systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 2.516313] localhost systemd-udevd[682]: Using interface naming scheme 'rhel-8.0'. [ 2.518564] localhost systemd[1]: Started Rule-based Manager for Device Events and Files. [ 2.524441] localhost systemd[1]: Starting dracut pre-trigger hook... [ 2.530220] localhost lldpad[705]: config file failed to load, [ 2.530322] localhost lldpad[705]: create a new file. [ 2.530332] localhost lldpad[705]: bound ctrl iface to /com/intel/lldpad [ 2.532391] localhost dracut-pre-trigger[708]: 707 [ 2.536294] localhost dracut-pre-trigger[695]: rd.md=0: removing MD RAID activation [ 2.596343] localhost systemd[1]: Finished dracut pre-trigger hook. [ 2.604341] localhost systemd[1]: Starting Coldplug All udev Devices... [ 2.657188] localhost systemd[1]: Created slice Slice /system/modprobe. [ 2.661307] localhost systemd[1]: Starting Load Kernel Module configfs... [ 2.661705] localhost systemd[1]: Finished Coldplug All udev Devices. [ 2.662337] localhost systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 2.662386] localhost systemd[1]: Finished Load Kernel Module configfs. [ 2.663623] localhost systemd[1]: Mounting Kernel Configuration File System... [ 2.664060] localhost systemd[1]: nm-initrd.service was skipped because of an unmet condition check (ConditionPathExists=/run/NetworkManager/initrd/neednet). [ 2.664083] localhost systemd[1]: Reached target Network. [ 2.664939] localhost systemd[1]: nm-wait-online-initrd.service was skipped because of an unmet condition check (ConditionPathExists=/run/NetworkManager/initrd/neednet). [ 2.664975] localhost systemd[1]: Starting dracut initqueue hook... [ 2.665206] localhost systemd[1]: Show Plymouth Boot Screen was skipped because of an unmet condition check (ConditionKernelCommandLine=!plymouth.enable=0). [ 2.665360] localhost systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 2.665917] localhost systemd[1]: Forward Password Requests to Plymouth Directory Watch was skipped because of an unmet condition check (ConditionPathExists=/run/plymouth/pid). [ 2.665965] localhost systemd[1]: Reached target Path Units. [ 2.666724] localhost systemd[1]: Starting Wait for udev To Complete Device Initialization... [ 2.667780] localhost systemd[1]: Mounted Kernel Configuration File System. [ 2.697547] localhost udevadm[764]: systemd-udev-settle.service is deprecated. Please fix multipathd.service, multipathd-configure.service not to pull it in. [ 2.839758] localhost kernel: virtio_blk virtio3: 2/0/0 default/read/poll queues [ 2.841311] localhost kernel: virtio_blk virtio3: [vda] 62914560 512-byte logical blocks (32.2 GB/30.0 GiB) [ 2.843908] localhost kernel: vda: vda1 vda2 vda3 [ 2.860340] localhost kernel: ACPI: bus type drm_connector registered [ 2.864156] localhost kernel: alg: self-tests for crc32-pclmul (crc32) passed [ 2.883474] localhost kernel: [drm] pci: virtio-vga detected at 0000:00:01.0 [ 2.884188] localhost kernel: Console: switching to colour dummy device 80x25 [ 2.884667] localhost kernel: virtio-pci 0000:00:01.0: vgaarb: deactivate vga console [ 2.885417] localhost kernel: [drm] features: -virgl +edid -resource_blob -host_visible [ 2.885420] localhost kernel: [drm] features: -context_init [ 2.886545] localhost kernel: [drm] number of scanouts: 1 [ 2.886832] localhost kernel: [drm] number of cap sets: 0 [ 2.887236] localhost kernel: [drm] Initialized virtio_gpu 0.1.0 for 0000:00:01.0 on minor 0 [ 2.891822] localhost kernel: fbcon: virtio_gpudrmfb (fb0) is primary device [ 2.892248] localhost kernel: Console: switching to colour frame buffer device 160x50 [ 2.894951] localhost kernel: virtio-pci 0000:00:01.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.811137] localhost systemd[1]: Found device /dev/disk/by-uuid/a9954e16-2e8a-4de1-ab29-2ca6943b850b. [ 2.921090] localhost kernel: 8021q: 802.1Q VLAN Support v1.8 [ 2.824669] localhost systemd[1]: Reloading. [ 2.926670] localhost kernel: virtio_net virtio1 enp1s0: renamed from eth0 [ 2.977155] localhost kernel: libata version 3.00 loaded. [ 2.906165] localhost lvm[782]: PV /dev/vda3 online, VG rhel is complete. [ 3.004861] localhost kernel: ahci 0000:00:1f.2: version 3.0 [ 3.020536] localhost kernel: ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 3.021279] localhost kernel: ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 3.021283] localhost kernel: ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 3.021284] localhost kernel: ahci 0000:00:1f.2: flags: 64bit ncq only [ 3.036840] localhost kernel: scsi host0: ahci [ 3.044303] localhost kernel: scsi host1: ahci [ 3.057878] localhost kernel: scsi host2: ahci [ 3.074947] localhost kernel: scsi host3: ahci [ 3.082125] localhost kernel: scsi host4: ahci [ 3.096470] localhost kernel: scsi host5: ahci [ 3.096895] localhost kernel: ata1: SATA max UDMA/133 abar m4096@0x82440000 port 0x82440100 irq 54 lpm-pol 0 [ 3.096902] localhost kernel: ata2: SATA max UDMA/133 abar m4096@0x82440000 port 0x82440180 irq 54 lpm-pol 0 [ 3.096909] localhost kernel: ata3: SATA max UDMA/133 abar m4096@0x82440000 port 0x82440200 irq 54 lpm-pol 0 [ 3.096912] localhost kernel: ata4: SATA max UDMA/133 abar m4096@0x82440000 port 0x82440280 irq 54 lpm-pol 0 [ 3.096919] localhost kernel: ata5: SATA max UDMA/133 abar m4096@0x82440000 port 0x82440300 irq 54 lpm-pol 0 [ 3.096922] localhost kernel: ata6: SATA max UDMA/133 abar m4096@0x82440000 port 0x82440380 irq 54 lpm-pol 0 [ 3.101838] localhost systemd-cryptsetup-generator[789]: Not creating device 'luks-da585fa3-1b96-4e27-bd1e-8e6bfd8b4000' because it was not specified on the kernel command line. [ 3.101845] localhost systemd-cryptsetup-generator[789]: Not creating device 'luks-c32cdc66-3697-416b-8563-3e0f677ab6fe' because it was not specified on the kernel command line. [ 3.101849] localhost systemd-cryptsetup-generator[789]: Not creating device 'luks-aab625bb-4f80-4f26-97be-10a28f75ffc9' because it was not specified on the kernel command line. [ 3.101852] localhost systemd-cryptsetup-generator[789]: Not creating device 'luks-d3542a15-11ba-4e6e-85b8-ed646e3c8425' because it was not specified on the kernel command line. [ 3.101854] localhost systemd-cryptsetup-generator[789]: Not creating device 'luks-b8e94c2d-855e-43bf-9511-2d530dacfb51' because it was not specified on the kernel command line. [ 3.101857] localhost systemd-cryptsetup-generator[789]: Not creating device 'luks-aecc6a62-900f-4bf5-9808-33f54c76499b' because it was not specified on the kernel command line. [ 3.057730] localhost systemd[1]: OnFailureIsolate is deprecated. Please use OnFailureJobMode= instead [ 3.080722] localhost systemd[1]: Found device /dev/disk/by-uuid/1AD2-5FCA. [ 3.089268] localhost systemd[1]: Started /usr/sbin/lvm vgchange -aay --autoactivation event rhel. [ 3.140223] localhost systemd[1]: Found device /dev/disk/by-uuid/522b7104-47c1-4300-b49a-f5603cddea77. [ 3.144410] localhost systemd[1]: Starting Cryptography Setup for luks-522b7104-47c1-4300-b49a-f5603cddea77... [ 3.159216] localhost systemd[1]: Found device /dev/disk/by-uuid/e983569c-1255-44dd-8201-6de51ca5385d. [ 3.165965] localhost lvm[871]: 8 logical volume(s) in volume group "rhel" now active [ 3.168611] localhost systemd[1]: Starting Cryptography Setup for luks-e983569c-1255-44dd-8201-6de51ca5385d... [ 3.176270] localhost systemd[1]: lvm-activate-rhel.service: Deactivated successfully. [ 3.188095] localhost systemd-cryptsetup[899]: Running in FIPS mode. [ 3.200840] localhost systemd[1]: Started Forward Password Requests to Clevis. [ 3.200928] localhost systemd[1]: Started Dispatch Password Requests to Console. [ 3.216095] localhost systemd-cryptsetup[911]: Running in FIPS mode. [ 3.257788] localhost systemd-tty-ask-password-agent[928]: Starting password query on /dev/ttyS0. [ 3.404536] localhost kernel: ata3: SATA link down (SStatus 0 SControl 300) [ 3.404679] localhost kernel: ata2: SATA link down (SStatus 0 SControl 300) [ 3.408496] localhost kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.408914] localhost kernel: ata1.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 3.408917] localhost kernel: ata1.00: applying bridge limits [ 3.409585] localhost kernel: ata1.00: configured for UDMA/100 [ 3.410015] localhost kernel: scsi 0:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 3.421010] localhost kernel: ata4: SATA link down (SStatus 0 SControl 300) [ 3.428124] localhost kernel: ata5: SATA link down (SStatus 0 SControl 300) [ 3.436683] localhost kernel: ata6: SATA link down (SStatus 0 SControl 300) [ 3.443912] localhost kernel: scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 3.455979] localhost kernel: sr 0:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 3.455985] localhost kernel: cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.466385] localhost kernel: sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 3.656215] localhost systemd[1]: Finished Wait for udev To Complete Device Initialization. [ 3.656328] localhost systemd[1]: Device-Mapper Multipath Default Configuration was skipped because of an unmet condition check (ConditionKernelCommandLine=rd.multipath=default). [ 3.656348] localhost systemd[1]: Device-Mapper Multipath Device Controller was skipped because of an unmet condition check (ConditionPathExists=/etc/multipath.conf). [ 3.792338] localhost dracut-initqueue[999]: Scanning devices vda3 for LVM logical volumes rhel/root [ 3.792338] localhost dracut-initqueue[999]: rhel/swap [ 3.829010] localhost dracut-initqueue[999]: rhel/root linear [ 3.829010] localhost dracut-initqueue[999]: rhel/swap linear [ 4.024476] localhost systemd-cryptsetup[899]: Set cipher aes, mode xts-plain64, key size 512 bits for device /dev/disk/by-uuid/522b7104-47c1-4300-b49a-f5603cddea77. [ 4.025878] localhost clevis-luks-askpass[914]: Unlocked /dev/disk/by-uuid/522b7104-47c1-4300-b49a-f5603cddea77 (UUID=522b7104-47c1-4300-b49a-f5603cddea77) successfully [ 4.037012] localhost systemd-cryptsetup[911]: Set cipher aes, mode xts-plain64, key size 512 bits for device /dev/disk/by-uuid/e983569c-1255-44dd-8201-6de51ca5385d. [ 4.037071] localhost systemd-tty-ask-password-agent[928]: Invalid password file /run/systemd/ask-password/ask.F6duXC [ 4.037087] localhost systemd-tty-ask-password-agent[928]: Failed to process password: Bad message [ 7.930281] localhost systemd[1]: Found device /dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f. [ 7.931096] localhost systemd[1]: Finished Cryptography Setup for luks-522b7104-47c1-4300-b49a-f5603cddea77. [ 7.931771] localhost systemd[1]: Reached target Initrd Root Device. [ 7.993849] localhost systemd-cryptsetup[911]: Failed to activate with specified passphrase. (Passphrase incorrect?) [ 8.010303] localhost systemd-tty-ask-password-agent[928]: Starting password query on /dev/ttyS0. [ 11.310256] localhost systemd-cryptsetup[911]: Set cipher aes, mode xts-plain64, key size 512 bits for device /dev/disk/by-uuid/e983569c-1255-44dd-8201-6de51ca5385d. [ 11.311308] localhost clevis-luks-askpass[914]: Unlocked /dev/disk/by-uuid/e983569c-1255-44dd-8201-6de51ca5385d (UUID=e983569c-1255-44dd-8201-6de51ca5385d) successfully [ 14.525123] localhost systemd[1]: Finished Cryptography Setup for luks-e983569c-1255-44dd-8201-6de51ca5385d. [ 14.527014] localhost systemd[1]: Found device /dev/mapper/luks-e983569c-1255-44dd-8201-6de51ca5385d. [ 14.527559] localhost systemd[1]: Reached target Local Encrypted Volumes. [ 14.535198] localhost systemd[1]: Activating swap /dev/mapper/luks-e983569c-1255-44dd-8201-6de51ca5385d... [ 14.535309] localhost systemd[1]: Starting Resume from hibernation using device /dev/mapper/luks-e983569c-1255-44dd-8201-6de51ca5385d... [ 14.633360] localhost kernel: Adding 1032188k swap on /dev/mapper/luks-e983569c-1255-44dd-8201-6de51ca5385d. Priority:-2 extents:1 across:1032188k [ 14.537803] localhost systemd[1]: Activated swap /dev/mapper/luks-e983569c-1255-44dd-8201-6de51ca5385d. [ 14.544041] localhost systemd[1]: Reached target Swaps. [ 14.668400] localhost kernel: Lockdown: systemd-hiberna: hibernation is restricted; see man kernel_lockdown.7 [ 14.571358] localhost systemd-hibernate-resume[2087]: Could not resume from '/dev/mapper/luks-e983569c-1255-44dd-8201-6de51ca5385d' (253:9). [ 14.572054] localhost systemd[1]: systemd-hibernate-resume@dev-mapper-luks\x2de983569c\x2d1255\x2d44dd\x2d8201\x2d6de51ca5385d.service: Deactivated successfully. [ 14.572087] localhost systemd[1]: Finished Resume from hibernation using device /dev/mapper/luks-e983569c-1255-44dd-8201-6de51ca5385d. [ 14.573108] localhost systemd[1]: Reached target Preparation for Local File Systems. [ 178.006139] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 178.006139] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 178.006139] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 178.009864] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 178.009864] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 178.009864] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 178.009864] localhost dracut-initqueue[763]: log_debug() { [ 178.009864] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 178.009864] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 178.009864] localhost dracut-initqueue[763]: } [ 178.009864] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 178.009864] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 178.009864] localhost dracut-initqueue[763]: result=0 [ 178.009864] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 178.009864] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 178.009864] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 178.009864] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 178.009864] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 178.009864] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 178.009864] localhost dracut-initqueue[763]: continue [ 178.009864] localhost dracut-initqueue[763]: fi [ 178.009864] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 178.009864] localhost dracut-initqueue[763]: is_bindmount=$? [ 178.009864] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 178.009864] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 178.009864] localhost dracut-initqueue[763]: continue [ 178.009864] localhost dracut-initqueue[763]: fi [ 178.009864] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 178.009864] localhost dracut-initqueue[763]: is_nofail=$? [ 178.009864] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 178.009864] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 178.009864] localhost dracut-initqueue[763]: continue [ 178.009864] localhost dracut-initqueue[763]: fi [ 178.009864] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 178.009864] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 178.009864] localhost dracut-initqueue[763]: result=1 [ 178.009864] localhost dracut-initqueue[763]: fi [ 178.009864] localhost dracut-initqueue[763]: done [ 178.009864] localhost dracut-initqueue[763]: return $result [ 178.009864] localhost dracut-initqueue[763]: } [ 178.009864] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 178.009864] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 178.009864] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 178.035306] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 178.035306] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 178.035306] localhost dracut-initqueue[763]: fi" [ 178.035306] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 178.035306] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 178.035306] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 178.076805] localhost dracut-initqueue[62393]: Scanning devices vda3 for LVM logical volumes rhel/root [ 178.076805] localhost dracut-initqueue[62393]: rhel/swap [ 178.119531] localhost dracut-initqueue[62393]: rhel/root linear [ 178.119531] localhost dracut-initqueue[62393]: rhel/swap linear [ 178.967793] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 178.967793] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 178.967793] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 178.967793] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 178.967793] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 178.967793] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 178.967793] localhost dracut-initqueue[763]: log_debug() { [ 178.967793] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 178.967793] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 178.967793] localhost dracut-initqueue[763]: } [ 178.967793] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 178.967793] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 178.967793] localhost dracut-initqueue[763]: result=0 [ 178.967793] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 178.967793] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 178.967793] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 178.967793] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 178.967793] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 178.967793] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 178.967793] localhost dracut-initqueue[763]: continue [ 178.967793] localhost dracut-initqueue[763]: fi [ 178.967793] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 178.967793] localhost dracut-initqueue[763]: is_bindmount=$? [ 178.967793] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 178.967793] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 178.967793] localhost dracut-initqueue[763]: continue [ 178.967793] localhost dracut-initqueue[763]: fi [ 178.967793] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 178.967793] localhost dracut-initqueue[763]: is_nofail=$? [ 178.967793] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 178.967793] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 178.967793] localhost dracut-initqueue[763]: continue [ 178.967793] localhost dracut-initqueue[763]: fi [ 178.967793] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 178.967793] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 178.967793] localhost dracut-initqueue[763]: result=1 [ 178.967793] localhost dracut-initqueue[763]: fi [ 178.967793] localhost dracut-initqueue[763]: done [ 178.967793] localhost dracut-initqueue[763]: return $result [ 178.967793] localhost dracut-initqueue[763]: } [ 178.967793] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 178.967793] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 178.986979] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 178.986979] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 178.986979] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 178.986979] localhost dracut-initqueue[763]: fi" [ 178.986979] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 178.986979] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 178.986979] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 179.702437] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 179.703377] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 179.703377] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 179.705056] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 179.705056] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 179.705056] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 179.705056] localhost dracut-initqueue[763]: log_debug() { [ 179.705056] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 179.705056] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 179.705056] localhost dracut-initqueue[763]: } [ 179.705056] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 179.705056] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 179.705056] localhost dracut-initqueue[763]: result=0 [ 179.705056] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 179.705056] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 179.705056] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 179.705056] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 179.705056] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 179.705056] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 179.705056] localhost dracut-initqueue[763]: continue [ 179.705056] localhost dracut-initqueue[763]: fi [ 179.705056] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 179.705056] localhost dracut-initqueue[763]: is_bindmount=$? [ 179.705056] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 179.705056] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 179.705056] localhost dracut-initqueue[763]: continue [ 179.705056] localhost dracut-initqueue[763]: fi [ 179.705056] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 179.705056] localhost dracut-initqueue[763]: is_nofail=$? [ 179.705056] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 179.705056] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 179.705056] localhost dracut-initqueue[763]: continue [ 179.705056] localhost dracut-initqueue[763]: fi [ 179.705056] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 179.705056] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 179.705056] localhost dracut-initqueue[763]: result=1 [ 179.705056] localhost dracut-initqueue[763]: fi [ 179.705056] localhost dracut-initqueue[763]: done [ 179.705056] localhost dracut-initqueue[763]: return $result [ 179.705056] localhost dracut-initqueue[763]: } [ 179.705056] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 179.705056] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 179.705056] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 179.705056] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 179.705056] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 179.705056] localhost dracut-initqueue[763]: fi" [ 179.724501] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 179.724501] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 179.724501] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 180.452014] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 180.453180] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 180.453180] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 180.456465] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 180.456465] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 180.456465] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 180.456465] localhost dracut-initqueue[763]: log_debug() { [ 180.456465] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 180.456465] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 180.456465] localhost dracut-initqueue[763]: } [ 180.456465] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 180.456465] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 180.456465] localhost dracut-initqueue[763]: result=0 [ 180.456465] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 180.456465] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 180.456465] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 180.456465] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 180.456465] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 180.456465] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 180.456465] localhost dracut-initqueue[763]: continue [ 180.456465] localhost dracut-initqueue[763]: fi [ 180.456465] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 180.456465] localhost dracut-initqueue[763]: is_bindmount=$? [ 180.456465] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 180.456465] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 180.456465] localhost dracut-initqueue[763]: continue [ 180.456465] localhost dracut-initqueue[763]: fi [ 180.456465] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 180.456465] localhost dracut-initqueue[763]: is_nofail=$? [ 180.456465] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 180.456465] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 180.456465] localhost dracut-initqueue[763]: continue [ 180.456465] localhost dracut-initqueue[763]: fi [ 180.456465] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 180.456465] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 180.456465] localhost dracut-initqueue[763]: result=1 [ 180.456465] localhost dracut-initqueue[763]: fi [ 180.456465] localhost dracut-initqueue[763]: done [ 180.456465] localhost dracut-initqueue[763]: return $result [ 180.456465] localhost dracut-initqueue[763]: } [ 180.456465] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 180.456465] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 180.456465] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 180.456465] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 180.456465] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 180.456465] localhost dracut-initqueue[763]: fi" [ 180.478188] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 180.478188] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 180.478188] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 181.193913] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 181.195458] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 181.195458] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 181.197788] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 181.197788] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 181.197788] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 181.197788] localhost dracut-initqueue[763]: log_debug() { [ 181.197788] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 181.197788] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 181.197788] localhost dracut-initqueue[763]: } [ 181.197788] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 181.197788] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 181.197788] localhost dracut-initqueue[763]: result=0 [ 181.197788] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 181.197788] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 181.197788] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 181.197788] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 181.197788] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 181.197788] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 181.197788] localhost dracut-initqueue[763]: continue [ 181.197788] localhost dracut-initqueue[763]: fi [ 181.197788] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 181.197788] localhost dracut-initqueue[763]: is_bindmount=$? [ 181.197788] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 181.197788] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 181.197788] localhost dracut-initqueue[763]: continue [ 181.197788] localhost dracut-initqueue[763]: fi [ 181.197788] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 181.197788] localhost dracut-initqueue[763]: is_nofail=$? [ 181.197788] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 181.197788] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 181.197788] localhost dracut-initqueue[763]: continue [ 181.197788] localhost dracut-initqueue[763]: fi [ 181.197788] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 181.197788] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 181.197788] localhost dracut-initqueue[763]: result=1 [ 181.197788] localhost dracut-initqueue[763]: fi [ 181.197788] localhost dracut-initqueue[763]: done [ 181.197788] localhost dracut-initqueue[763]: return $result [ 181.197788] localhost dracut-initqueue[763]: } [ 181.197788] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 181.197788] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 181.197788] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 181.214776] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 181.214776] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 181.214776] localhost dracut-initqueue[763]: fi" [ 181.214776] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 181.214776] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 181.214776] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 181.931773] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 181.932525] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 181.932525] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 181.934185] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 181.934185] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 181.934185] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 181.934185] localhost dracut-initqueue[763]: log_debug() { [ 181.934185] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 181.934185] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 181.934185] localhost dracut-initqueue[763]: } [ 181.934185] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 181.934185] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 181.934185] localhost dracut-initqueue[763]: result=0 [ 181.934185] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 181.934185] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 181.934185] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 181.934185] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 181.934185] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 181.934185] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 181.934185] localhost dracut-initqueue[763]: continue [ 181.934185] localhost dracut-initqueue[763]: fi [ 181.934185] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 181.934185] localhost dracut-initqueue[763]: is_bindmount=$? [ 181.934185] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 181.934185] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 181.934185] localhost dracut-initqueue[763]: continue [ 181.934185] localhost dracut-initqueue[763]: fi [ 181.934185] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 181.934185] localhost dracut-initqueue[763]: is_nofail=$? [ 181.934185] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 181.934185] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 181.934185] localhost dracut-initqueue[763]: continue [ 181.934185] localhost dracut-initqueue[763]: fi [ 181.934185] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 181.934185] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 181.934185] localhost dracut-initqueue[763]: result=1 [ 181.934185] localhost dracut-initqueue[763]: fi [ 181.934185] localhost dracut-initqueue[763]: done [ 181.934185] localhost dracut-initqueue[763]: return $result [ 181.934185] localhost dracut-initqueue[763]: } [ 181.934185] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 181.934185] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 181.934185] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 181.934185] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 181.934185] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 181.934185] localhost dracut-initqueue[763]: fi" [ 181.953570] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 181.953570] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 181.953570] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 182.655960] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 182.656769] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 182.656769] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 182.658454] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 182.658454] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 182.658454] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 182.658454] localhost dracut-initqueue[763]: log_debug() { [ 182.658454] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 182.658454] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 182.658454] localhost dracut-initqueue[763]: } [ 182.658454] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 182.658454] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 182.658454] localhost dracut-initqueue[763]: result=0 [ 182.658454] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 182.658454] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 182.658454] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 182.658454] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 182.658454] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 182.658454] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 182.658454] localhost dracut-initqueue[763]: continue [ 182.658454] localhost dracut-initqueue[763]: fi [ 182.658454] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 182.658454] localhost dracut-initqueue[763]: is_bindmount=$? [ 182.658454] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 182.658454] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 182.658454] localhost dracut-initqueue[763]: continue [ 182.658454] localhost dracut-initqueue[763]: fi [ 182.658454] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 182.658454] localhost dracut-initqueue[763]: is_nofail=$? [ 182.658454] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 182.658454] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 182.658454] localhost dracut-initqueue[763]: continue [ 182.658454] localhost dracut-initqueue[763]: fi [ 182.658454] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 182.658454] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 182.658454] localhost dracut-initqueue[763]: result=1 [ 182.658454] localhost dracut-initqueue[763]: fi [ 182.658454] localhost dracut-initqueue[763]: done [ 182.658454] localhost dracut-initqueue[763]: return $result [ 182.658454] localhost dracut-initqueue[763]: } [ 182.658454] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 182.658454] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 182.658454] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 182.658454] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 182.658454] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 182.658454] localhost dracut-initqueue[763]: fi" [ 182.677681] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 182.677681] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 182.677681] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 183.332434] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 183.333818] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 183.333818] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 183.336056] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 183.336056] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 183.336056] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 183.336056] localhost dracut-initqueue[763]: log_debug() { [ 183.336056] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 183.336056] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 183.336056] localhost dracut-initqueue[763]: } [ 183.336056] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 183.336056] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 183.336056] localhost dracut-initqueue[763]: result=0 [ 183.336056] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 183.336056] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 183.336056] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 183.336056] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 183.336056] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 183.336056] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 183.336056] localhost dracut-initqueue[763]: continue [ 183.336056] localhost dracut-initqueue[763]: fi [ 183.336056] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 183.336056] localhost dracut-initqueue[763]: is_bindmount=$? [ 183.336056] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 183.336056] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 183.336056] localhost dracut-initqueue[763]: continue [ 183.336056] localhost dracut-initqueue[763]: fi [ 183.336056] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 183.336056] localhost dracut-initqueue[763]: is_nofail=$? [ 183.336056] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 183.336056] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 183.336056] localhost dracut-initqueue[763]: continue [ 183.336056] localhost dracut-initqueue[763]: fi [ 183.336056] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 183.336056] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 183.336056] localhost dracut-initqueue[763]: result=1 [ 183.336056] localhost dracut-initqueue[763]: fi [ 183.336056] localhost dracut-initqueue[763]: done [ 183.336056] localhost dracut-initqueue[763]: return $result [ 183.336056] localhost dracut-initqueue[763]: } [ 183.336056] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 183.336056] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 183.336056] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 183.354026] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 183.354026] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 183.354026] localhost dracut-initqueue[763]: fi" [ 183.354026] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 183.354026] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 183.354026] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 184.064786] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 184.066166] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 184.066166] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 184.066166] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 184.066166] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 184.066166] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 184.066166] localhost dracut-initqueue[763]: log_debug() { [ 184.066166] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 184.066166] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 184.066166] localhost dracut-initqueue[763]: } [ 184.066166] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 184.066166] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 184.066166] localhost dracut-initqueue[763]: result=0 [ 184.066166] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 184.066166] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 184.066166] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 184.066166] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 184.066166] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 184.066166] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 184.066166] localhost dracut-initqueue[763]: continue [ 184.066166] localhost dracut-initqueue[763]: fi [ 184.066166] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 184.066166] localhost dracut-initqueue[763]: is_bindmount=$? [ 184.066166] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 184.066166] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 184.066166] localhost dracut-initqueue[763]: continue [ 184.066166] localhost dracut-initqueue[763]: fi [ 184.066166] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 184.066166] localhost dracut-initqueue[763]: is_nofail=$? [ 184.066166] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 184.066166] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 184.066166] localhost dracut-initqueue[763]: continue [ 184.066166] localhost dracut-initqueue[763]: fi [ 184.066166] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 184.066166] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 184.066166] localhost dracut-initqueue[763]: result=1 [ 184.066166] localhost dracut-initqueue[763]: fi [ 184.066166] localhost dracut-initqueue[763]: done [ 184.066166] localhost dracut-initqueue[763]: return $result [ 184.066166] localhost dracut-initqueue[763]: } [ 184.066166] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 184.066166] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 184.066166] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 184.090459] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 184.090459] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 184.090459] localhost dracut-initqueue[763]: fi" [ 184.090459] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 184.090459] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 184.090459] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 184.849834] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 184.850616] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 184.850616] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 184.852182] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 184.852182] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 184.852182] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 184.852182] localhost dracut-initqueue[763]: log_debug() { [ 184.852182] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 184.852182] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 184.852182] localhost dracut-initqueue[763]: } [ 184.852182] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 184.852182] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 184.852182] localhost dracut-initqueue[763]: result=0 [ 184.852182] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 184.852182] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 184.852182] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 184.852182] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 184.852182] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 184.852182] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 184.852182] localhost dracut-initqueue[763]: continue [ 184.852182] localhost dracut-initqueue[763]: fi [ 184.852182] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 184.852182] localhost dracut-initqueue[763]: is_bindmount=$? [ 184.852182] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 184.852182] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 184.852182] localhost dracut-initqueue[763]: continue [ 184.852182] localhost dracut-initqueue[763]: fi [ 184.852182] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 184.852182] localhost dracut-initqueue[763]: is_nofail=$? [ 184.852182] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 184.852182] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 184.852182] localhost dracut-initqueue[763]: continue [ 184.852182] localhost dracut-initqueue[763]: fi [ 184.852182] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 184.852182] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 184.852182] localhost dracut-initqueue[763]: result=1 [ 184.852182] localhost dracut-initqueue[763]: fi [ 184.852182] localhost dracut-initqueue[763]: done [ 184.852182] localhost dracut-initqueue[763]: return $result [ 184.852182] localhost dracut-initqueue[763]: } [ 184.852182] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 184.852182] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 184.852182] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 184.868752] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 184.868752] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 184.868752] localhost dracut-initqueue[763]: fi" [ 184.868752] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 184.868752] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 184.868752] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 185.571715] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 185.573075] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 185.573075] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 185.574611] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 185.574611] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 185.574611] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 185.574611] localhost dracut-initqueue[763]: log_debug() { [ 185.574611] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 185.574611] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 185.574611] localhost dracut-initqueue[763]: } [ 185.574611] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 185.574611] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 185.574611] localhost dracut-initqueue[763]: result=0 [ 185.574611] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 185.574611] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 185.574611] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 185.574611] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 185.574611] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 185.574611] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 185.574611] localhost dracut-initqueue[763]: continue [ 185.574611] localhost dracut-initqueue[763]: fi [ 185.574611] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 185.574611] localhost dracut-initqueue[763]: is_bindmount=$? [ 185.574611] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 185.574611] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 185.574611] localhost dracut-initqueue[763]: continue [ 185.574611] localhost dracut-initqueue[763]: fi [ 185.574611] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 185.574611] localhost dracut-initqueue[763]: is_nofail=$? [ 185.574611] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 185.574611] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 185.574611] localhost dracut-initqueue[763]: continue [ 185.574611] localhost dracut-initqueue[763]: fi [ 185.574611] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 185.574611] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 185.574611] localhost dracut-initqueue[763]: result=1 [ 185.574611] localhost dracut-initqueue[763]: fi [ 185.574611] localhost dracut-initqueue[763]: done [ 185.574611] localhost dracut-initqueue[763]: return $result [ 185.574611] localhost dracut-initqueue[763]: } [ 185.574611] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 185.574611] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 185.574611] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 185.574611] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 185.574611] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 185.574611] localhost dracut-initqueue[763]: fi" [ 185.595942] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 185.597688] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 185.598929] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 186.330967] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 186.332403] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 186.332403] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 186.333984] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 186.333984] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 186.333984] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 186.333984] localhost dracut-initqueue[763]: log_debug() { [ 186.333984] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 186.333984] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 186.333984] localhost dracut-initqueue[763]: } [ 186.333984] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 186.333984] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 186.333984] localhost dracut-initqueue[763]: result=0 [ 186.333984] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 186.333984] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 186.333984] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 186.333984] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 186.333984] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 186.333984] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 186.333984] localhost dracut-initqueue[763]: continue [ 186.333984] localhost dracut-initqueue[763]: fi [ 186.333984] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 186.333984] localhost dracut-initqueue[763]: is_bindmount=$? [ 186.333984] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 186.333984] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 186.333984] localhost dracut-initqueue[763]: continue [ 186.333984] localhost dracut-initqueue[763]: fi [ 186.333984] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 186.333984] localhost dracut-initqueue[763]: is_nofail=$? [ 186.333984] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 186.333984] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 186.333984] localhost dracut-initqueue[763]: continue [ 186.333984] localhost dracut-initqueue[763]: fi [ 186.333984] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 186.333984] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 186.333984] localhost dracut-initqueue[763]: result=1 [ 186.333984] localhost dracut-initqueue[763]: fi [ 186.333984] localhost dracut-initqueue[763]: done [ 186.333984] localhost dracut-initqueue[763]: return $result [ 186.333984] localhost dracut-initqueue[763]: } [ 186.333984] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 186.333984] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 186.333984] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 186.354333] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 186.354333] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 186.354333] localhost dracut-initqueue[763]: fi" [ 186.354333] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 186.354333] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 186.359632] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 187.076540] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 187.080343] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 187.080343] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 187.083571] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 187.083571] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 187.083571] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 187.083571] localhost dracut-initqueue[763]: log_debug() { [ 187.083571] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 187.083571] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 187.083571] localhost dracut-initqueue[763]: } [ 187.083571] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 187.083571] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 187.083571] localhost dracut-initqueue[763]: result=0 [ 187.083571] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 187.083571] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 187.083571] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 187.083571] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 187.083571] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 187.083571] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 187.083571] localhost dracut-initqueue[763]: continue [ 187.083571] localhost dracut-initqueue[763]: fi [ 187.083571] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 187.083571] localhost dracut-initqueue[763]: is_bindmount=$? [ 187.083571] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 187.083571] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 187.083571] localhost dracut-initqueue[763]: continue [ 187.083571] localhost dracut-initqueue[763]: fi [ 187.083571] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 187.083571] localhost dracut-initqueue[763]: is_nofail=$? [ 187.083571] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 187.083571] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 187.083571] localhost dracut-initqueue[763]: continue [ 187.083571] localhost dracut-initqueue[763]: fi [ 187.083571] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 187.083571] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 187.083571] localhost dracut-initqueue[763]: result=1 [ 187.083571] localhost dracut-initqueue[763]: fi [ 187.083571] localhost dracut-initqueue[763]: done [ 187.083571] localhost dracut-initqueue[763]: return $result [ 187.083571] localhost dracut-initqueue[763]: } [ 187.083571] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 187.083571] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 187.083571] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 187.083571] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 187.083571] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 187.083571] localhost dracut-initqueue[763]: fi" [ 187.103101] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 187.103101] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 187.103101] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 187.756770] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 187.757416] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 187.757416] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 187.759480] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 187.759480] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 187.759480] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 187.759480] localhost dracut-initqueue[763]: log_debug() { [ 187.759480] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 187.759480] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 187.759480] localhost dracut-initqueue[763]: } [ 187.759480] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 187.759480] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 187.759480] localhost dracut-initqueue[763]: result=0 [ 187.759480] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 187.759480] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 187.759480] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 187.759480] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 187.759480] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 187.759480] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 187.759480] localhost dracut-initqueue[763]: continue [ 187.759480] localhost dracut-initqueue[763]: fi [ 187.759480] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 187.759480] localhost dracut-initqueue[763]: is_bindmount=$? [ 187.759480] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 187.759480] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 187.759480] localhost dracut-initqueue[763]: continue [ 187.759480] localhost dracut-initqueue[763]: fi [ 187.759480] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 187.759480] localhost dracut-initqueue[763]: is_nofail=$? [ 187.759480] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 187.759480] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 187.759480] localhost dracut-initqueue[763]: continue [ 187.759480] localhost dracut-initqueue[763]: fi [ 187.759480] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 187.759480] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 187.759480] localhost dracut-initqueue[763]: result=1 [ 187.759480] localhost dracut-initqueue[763]: fi [ 187.759480] localhost dracut-initqueue[763]: done [ 187.759480] localhost dracut-initqueue[763]: return $result [ 187.759480] localhost dracut-initqueue[763]: } [ 187.759480] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 187.759480] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 187.759480] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 187.776123] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 187.776123] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 187.776123] localhost dracut-initqueue[763]: fi" [ 187.779434] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 187.781045] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 187.782278] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 188.481402] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 188.481402] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 188.481402] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 188.484269] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 188.484269] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 188.484269] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 188.484269] localhost dracut-initqueue[763]: log_debug() { [ 188.484269] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 188.484269] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 188.484269] localhost dracut-initqueue[763]: } [ 188.484269] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 188.484269] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 188.484269] localhost dracut-initqueue[763]: result=0 [ 188.484269] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 188.484269] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 188.484269] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 188.484269] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 188.484269] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 188.484269] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 188.484269] localhost dracut-initqueue[763]: continue [ 188.484269] localhost dracut-initqueue[763]: fi [ 188.484269] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 188.484269] localhost dracut-initqueue[763]: is_bindmount=$? [ 188.484269] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 188.484269] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 188.484269] localhost dracut-initqueue[763]: continue [ 188.484269] localhost dracut-initqueue[763]: fi [ 188.484269] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 188.484269] localhost dracut-initqueue[763]: is_nofail=$? [ 188.484269] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 188.484269] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 188.484269] localhost dracut-initqueue[763]: continue [ 188.484269] localhost dracut-initqueue[763]: fi [ 188.484269] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 188.484269] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 188.484269] localhost dracut-initqueue[763]: result=1 [ 188.484269] localhost dracut-initqueue[763]: fi [ 188.484269] localhost dracut-initqueue[763]: done [ 188.484269] localhost dracut-initqueue[763]: return $result [ 188.484269] localhost dracut-initqueue[763]: } [ 188.484269] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 188.484269] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 188.484269] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 188.503793] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 188.503793] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 188.503793] localhost dracut-initqueue[763]: fi" [ 188.506157] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 188.507604] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 188.509343] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 189.248445] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 189.249111] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 189.249111] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 189.251209] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 189.251209] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 189.251209] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 189.251209] localhost dracut-initqueue[763]: log_debug() { [ 189.251209] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 189.251209] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 189.251209] localhost dracut-initqueue[763]: } [ 189.251209] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 189.251209] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 189.251209] localhost dracut-initqueue[763]: result=0 [ 189.251209] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 189.251209] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 189.251209] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 189.251209] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 189.251209] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 189.251209] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 189.251209] localhost dracut-initqueue[763]: continue [ 189.251209] localhost dracut-initqueue[763]: fi [ 189.251209] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 189.251209] localhost dracut-initqueue[763]: is_bindmount=$? [ 189.251209] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 189.251209] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 189.251209] localhost dracut-initqueue[763]: continue [ 189.251209] localhost dracut-initqueue[763]: fi [ 189.251209] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 189.251209] localhost dracut-initqueue[763]: is_nofail=$? [ 189.251209] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 189.251209] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 189.251209] localhost dracut-initqueue[763]: continue [ 189.251209] localhost dracut-initqueue[763]: fi [ 189.251209] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 189.251209] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 189.251209] localhost dracut-initqueue[763]: result=1 [ 189.251209] localhost dracut-initqueue[763]: fi [ 189.251209] localhost dracut-initqueue[763]: done [ 189.251209] localhost dracut-initqueue[763]: return $result [ 189.251209] localhost dracut-initqueue[763]: } [ 189.251209] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 189.251209] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 189.251209] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 189.268275] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 189.268275] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 189.268275] localhost dracut-initqueue[763]: fi" [ 189.270935] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 189.272387] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 189.274058] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 189.989833] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 189.989833] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 189.989833] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 189.989833] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 189.989833] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 189.989833] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 189.989833] localhost dracut-initqueue[763]: log_debug() { [ 189.989833] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 189.989833] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 189.989833] localhost dracut-initqueue[763]: } [ 189.989833] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 189.989833] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 189.989833] localhost dracut-initqueue[763]: result=0 [ 189.989833] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 189.989833] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 189.989833] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 189.989833] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 189.989833] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 189.989833] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 189.989833] localhost dracut-initqueue[763]: continue [ 189.989833] localhost dracut-initqueue[763]: fi [ 189.989833] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 189.989833] localhost dracut-initqueue[763]: is_bindmount=$? [ 189.989833] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 189.989833] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 189.989833] localhost dracut-initqueue[763]: continue [ 189.989833] localhost dracut-initqueue[763]: fi [ 189.989833] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 189.989833] localhost dracut-initqueue[763]: is_nofail=$? [ 189.989833] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 189.989833] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 189.989833] localhost dracut-initqueue[763]: continue [ 189.989833] localhost dracut-initqueue[763]: fi [ 189.989833] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 189.989833] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 189.989833] localhost dracut-initqueue[763]: result=1 [ 189.989833] localhost dracut-initqueue[763]: fi [ 189.989833] localhost dracut-initqueue[763]: done [ 189.989833] localhost dracut-initqueue[763]: return $result [ 189.989833] localhost dracut-initqueue[763]: } [ 189.989833] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 189.989833] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 190.010909] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 190.010909] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 190.010909] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 190.010909] localhost dracut-initqueue[763]: fi" [ 190.010909] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 190.010909] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 190.010909] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 190.745416] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 190.746379] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 190.746379] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 190.748706] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 190.748706] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 190.748706] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 190.748706] localhost dracut-initqueue[763]: log_debug() { [ 190.748706] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 190.748706] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 190.748706] localhost dracut-initqueue[763]: } [ 190.748706] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 190.748706] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 190.748706] localhost dracut-initqueue[763]: result=0 [ 190.748706] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 190.748706] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 190.748706] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 190.748706] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 190.748706] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 190.748706] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 190.748706] localhost dracut-initqueue[763]: continue [ 190.748706] localhost dracut-initqueue[763]: fi [ 190.748706] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 190.748706] localhost dracut-initqueue[763]: is_bindmount=$? [ 190.748706] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 190.748706] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 190.748706] localhost dracut-initqueue[763]: continue [ 190.748706] localhost dracut-initqueue[763]: fi [ 190.748706] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 190.748706] localhost dracut-initqueue[763]: is_nofail=$? [ 190.748706] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 190.748706] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 190.748706] localhost dracut-initqueue[763]: continue [ 190.748706] localhost dracut-initqueue[763]: fi [ 190.748706] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 190.748706] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 190.748706] localhost dracut-initqueue[763]: result=1 [ 190.748706] localhost dracut-initqueue[763]: fi [ 190.748706] localhost dracut-initqueue[763]: done [ 190.748706] localhost dracut-initqueue[763]: return $result [ 190.748706] localhost dracut-initqueue[763]: } [ 190.748706] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 190.748706] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 190.748706] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 190.748706] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 190.748706] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 190.748706] localhost dracut-initqueue[763]: fi" [ 190.777014] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 190.777014] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 190.777014] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 191.494536] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 191.498366] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 191.498366] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 191.502615] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 191.502615] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 191.502615] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 191.502615] localhost dracut-initqueue[763]: log_debug() { [ 191.502615] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 191.502615] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 191.502615] localhost dracut-initqueue[763]: } [ 191.502615] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 191.502615] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 191.502615] localhost dracut-initqueue[763]: result=0 [ 191.502615] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 191.502615] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 191.502615] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 191.502615] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 191.502615] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 191.502615] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 191.502615] localhost dracut-initqueue[763]: continue [ 191.502615] localhost dracut-initqueue[763]: fi [ 191.502615] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 191.502615] localhost dracut-initqueue[763]: is_bindmount=$? [ 191.502615] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 191.502615] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 191.502615] localhost dracut-initqueue[763]: continue [ 191.502615] localhost dracut-initqueue[763]: fi [ 191.502615] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 191.502615] localhost dracut-initqueue[763]: is_nofail=$? [ 191.502615] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 191.502615] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 191.502615] localhost dracut-initqueue[763]: continue [ 191.502615] localhost dracut-initqueue[763]: fi [ 191.502615] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 191.502615] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 191.502615] localhost dracut-initqueue[763]: result=1 [ 191.502615] localhost dracut-initqueue[763]: fi [ 191.502615] localhost dracut-initqueue[763]: done [ 191.502615] localhost dracut-initqueue[763]: return $result [ 191.502615] localhost dracut-initqueue[763]: } [ 191.502615] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 191.502615] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 191.502615] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 191.502615] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 191.502615] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 191.502615] localhost dracut-initqueue[763]: fi" [ 191.529273] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 191.529273] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 191.529273] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 192.181707] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 192.183255] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 192.183255] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 192.186241] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 192.186241] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 192.186241] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 192.186241] localhost dracut-initqueue[763]: log_debug() { [ 192.186241] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 192.186241] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 192.186241] localhost dracut-initqueue[763]: } [ 192.186241] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 192.186241] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 192.186241] localhost dracut-initqueue[763]: result=0 [ 192.186241] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 192.186241] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 192.186241] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 192.186241] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 192.186241] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 192.186241] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 192.186241] localhost dracut-initqueue[763]: continue [ 192.186241] localhost dracut-initqueue[763]: fi [ 192.186241] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 192.186241] localhost dracut-initqueue[763]: is_bindmount=$? [ 192.186241] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 192.186241] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 192.186241] localhost dracut-initqueue[763]: continue [ 192.186241] localhost dracut-initqueue[763]: fi [ 192.186241] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 192.186241] localhost dracut-initqueue[763]: is_nofail=$? [ 192.186241] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 192.186241] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 192.186241] localhost dracut-initqueue[763]: continue [ 192.186241] localhost dracut-initqueue[763]: fi [ 192.186241] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 192.186241] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 192.186241] localhost dracut-initqueue[763]: result=1 [ 192.186241] localhost dracut-initqueue[763]: fi [ 192.186241] localhost dracut-initqueue[763]: done [ 192.186241] localhost dracut-initqueue[763]: return $result [ 192.186241] localhost dracut-initqueue[763]: } [ 192.186241] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 192.186241] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 192.186241] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 192.211304] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 192.211304] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 192.211304] localhost dracut-initqueue[763]: fi" [ 192.211304] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 192.216146] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 192.217272] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 192.956167] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 192.956167] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 192.956167] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 192.959360] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 192.959360] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 192.959360] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 192.959360] localhost dracut-initqueue[763]: log_debug() { [ 192.959360] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 192.959360] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 192.959360] localhost dracut-initqueue[763]: } [ 192.959360] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 192.959360] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 192.959360] localhost dracut-initqueue[763]: result=0 [ 192.959360] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 192.959360] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 192.959360] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 192.959360] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 192.959360] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 192.959360] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 192.959360] localhost dracut-initqueue[763]: continue [ 192.959360] localhost dracut-initqueue[763]: fi [ 192.959360] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 192.959360] localhost dracut-initqueue[763]: is_bindmount=$? [ 192.959360] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 192.959360] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 192.959360] localhost dracut-initqueue[763]: continue [ 192.959360] localhost dracut-initqueue[763]: fi [ 192.959360] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 192.959360] localhost dracut-initqueue[763]: is_nofail=$? [ 192.959360] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 192.959360] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 192.959360] localhost dracut-initqueue[763]: continue [ 192.959360] localhost dracut-initqueue[763]: fi [ 192.959360] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 192.959360] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 192.959360] localhost dracut-initqueue[763]: result=1 [ 192.959360] localhost dracut-initqueue[763]: fi [ 192.959360] localhost dracut-initqueue[763]: done [ 192.959360] localhost dracut-initqueue[763]: return $result [ 192.959360] localhost dracut-initqueue[763]: } [ 192.959360] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 192.959360] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 192.959360] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 192.959360] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 192.959360] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 192.959360] localhost dracut-initqueue[763]: fi" [ 192.987696] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 192.987696] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 192.987696] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 193.710813] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 193.711716] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 193.711716] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 193.714168] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 193.714168] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 193.714168] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 193.714168] localhost dracut-initqueue[763]: log_debug() { [ 193.714168] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 193.714168] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 193.714168] localhost dracut-initqueue[763]: } [ 193.714168] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 193.714168] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 193.714168] localhost dracut-initqueue[763]: result=0 [ 193.714168] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 193.714168] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 193.714168] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 193.714168] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 193.714168] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 193.714168] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 193.714168] localhost dracut-initqueue[763]: continue [ 193.714168] localhost dracut-initqueue[763]: fi [ 193.714168] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 193.714168] localhost dracut-initqueue[763]: is_bindmount=$? [ 193.714168] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 193.714168] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 193.714168] localhost dracut-initqueue[763]: continue [ 193.714168] localhost dracut-initqueue[763]: fi [ 193.714168] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 193.714168] localhost dracut-initqueue[763]: is_nofail=$? [ 193.714168] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 193.714168] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 193.714168] localhost dracut-initqueue[763]: continue [ 193.714168] localhost dracut-initqueue[763]: fi [ 193.714168] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 193.714168] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 193.714168] localhost dracut-initqueue[763]: result=1 [ 193.714168] localhost dracut-initqueue[763]: fi [ 193.714168] localhost dracut-initqueue[763]: done [ 193.714168] localhost dracut-initqueue[763]: return $result [ 193.714168] localhost dracut-initqueue[763]: } [ 193.714168] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 193.714168] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 193.714168] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 193.714168] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 193.714168] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 193.714168] localhost dracut-initqueue[763]: fi" [ 193.743403] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 193.743403] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 193.743403] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 194.450459] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 194.450459] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 194.450459] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 194.450459] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 194.450459] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 194.450459] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 194.450459] localhost dracut-initqueue[763]: log_debug() { [ 194.450459] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 194.450459] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 194.450459] localhost dracut-initqueue[763]: } [ 194.450459] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 194.450459] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 194.450459] localhost dracut-initqueue[763]: result=0 [ 194.450459] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 194.450459] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 194.450459] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 194.450459] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 194.450459] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 194.450459] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 194.450459] localhost dracut-initqueue[763]: continue [ 194.450459] localhost dracut-initqueue[763]: fi [ 194.450459] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 194.450459] localhost dracut-initqueue[763]: is_bindmount=$? [ 194.450459] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 194.450459] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 194.450459] localhost dracut-initqueue[763]: continue [ 194.450459] localhost dracut-initqueue[763]: fi [ 194.450459] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 194.450459] localhost dracut-initqueue[763]: is_nofail=$? [ 194.450459] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 194.450459] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 194.450459] localhost dracut-initqueue[763]: continue [ 194.450459] localhost dracut-initqueue[763]: fi [ 194.450459] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 194.450459] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 194.450459] localhost dracut-initqueue[763]: result=1 [ 194.450459] localhost dracut-initqueue[763]: fi [ 194.450459] localhost dracut-initqueue[763]: done [ 194.450459] localhost dracut-initqueue[763]: return $result [ 194.450459] localhost dracut-initqueue[763]: } [ 194.450459] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 194.450459] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 194.478084] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 194.478084] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 194.478084] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 194.478084] localhost dracut-initqueue[763]: fi" [ 194.478084] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 194.478084] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 194.478084] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 195.179763] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 195.181240] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 195.181240] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 195.181240] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 195.181240] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 195.181240] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 195.181240] localhost dracut-initqueue[763]: log_debug() { [ 195.181240] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 195.181240] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 195.181240] localhost dracut-initqueue[763]: } [ 195.181240] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 195.181240] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 195.181240] localhost dracut-initqueue[763]: result=0 [ 195.181240] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 195.181240] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 195.181240] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 195.181240] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 195.181240] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 195.181240] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 195.181240] localhost dracut-initqueue[763]: continue [ 195.181240] localhost dracut-initqueue[763]: fi [ 195.181240] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 195.181240] localhost dracut-initqueue[763]: is_bindmount=$? [ 195.181240] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 195.181240] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 195.181240] localhost dracut-initqueue[763]: continue [ 195.181240] localhost dracut-initqueue[763]: fi [ 195.181240] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 195.181240] localhost dracut-initqueue[763]: is_nofail=$? [ 195.181240] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 195.181240] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 195.181240] localhost dracut-initqueue[763]: continue [ 195.181240] localhost dracut-initqueue[763]: fi [ 195.181240] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 195.181240] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 195.181240] localhost dracut-initqueue[763]: result=1 [ 195.181240] localhost dracut-initqueue[763]: fi [ 195.181240] localhost dracut-initqueue[763]: done [ 195.181240] localhost dracut-initqueue[763]: return $result [ 195.181240] localhost dracut-initqueue[763]: } [ 195.181240] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 195.181240] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 195.181240] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 195.209905] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 195.209905] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 195.209905] localhost dracut-initqueue[763]: fi" [ 195.209905] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 195.209905] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 195.209905] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 195.936781] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 195.939545] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 195.939545] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 195.944529] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 195.944529] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 195.944529] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 195.944529] localhost dracut-initqueue[763]: log_debug() { [ 195.944529] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 195.944529] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 195.944529] localhost dracut-initqueue[763]: } [ 195.944529] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 195.944529] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 195.944529] localhost dracut-initqueue[763]: result=0 [ 195.944529] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 195.944529] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 195.944529] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 195.944529] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 195.944529] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 195.944529] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 195.944529] localhost dracut-initqueue[763]: continue [ 195.944529] localhost dracut-initqueue[763]: fi [ 195.944529] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 195.944529] localhost dracut-initqueue[763]: is_bindmount=$? [ 195.944529] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 195.944529] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 195.944529] localhost dracut-initqueue[763]: continue [ 195.944529] localhost dracut-initqueue[763]: fi [ 195.944529] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 195.944529] localhost dracut-initqueue[763]: is_nofail=$? [ 195.944529] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 195.944529] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 195.944529] localhost dracut-initqueue[763]: continue [ 195.944529] localhost dracut-initqueue[763]: fi [ 195.944529] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 195.944529] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 195.944529] localhost dracut-initqueue[763]: result=1 [ 195.944529] localhost dracut-initqueue[763]: fi [ 195.944529] localhost dracut-initqueue[763]: done [ 195.944529] localhost dracut-initqueue[763]: return $result [ 195.944529] localhost dracut-initqueue[763]: } [ 195.944529] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 195.944529] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 195.944529] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 195.969746] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 195.969746] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 195.969746] localhost dracut-initqueue[763]: fi" [ 195.969746] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 195.969746] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 195.969746] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 196.658867] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 196.660215] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 196.660215] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 196.663276] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 196.663276] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 196.663276] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 196.663276] localhost dracut-initqueue[763]: log_debug() { [ 196.663276] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 196.663276] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 196.663276] localhost dracut-initqueue[763]: } [ 196.663276] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 196.663276] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 196.663276] localhost dracut-initqueue[763]: result=0 [ 196.663276] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 196.663276] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 196.663276] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 196.663276] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 196.663276] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 196.663276] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 196.663276] localhost dracut-initqueue[763]: continue [ 196.663276] localhost dracut-initqueue[763]: fi [ 196.663276] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 196.663276] localhost dracut-initqueue[763]: is_bindmount=$? [ 196.663276] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 196.663276] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 196.663276] localhost dracut-initqueue[763]: continue [ 196.663276] localhost dracut-initqueue[763]: fi [ 196.663276] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 196.663276] localhost dracut-initqueue[763]: is_nofail=$? [ 196.663276] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 196.663276] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 196.663276] localhost dracut-initqueue[763]: continue [ 196.663276] localhost dracut-initqueue[763]: fi [ 196.663276] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 196.663276] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 196.663276] localhost dracut-initqueue[763]: result=1 [ 196.663276] localhost dracut-initqueue[763]: fi [ 196.663276] localhost dracut-initqueue[763]: done [ 196.663276] localhost dracut-initqueue[763]: return $result [ 196.663276] localhost dracut-initqueue[763]: } [ 196.663276] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 196.663276] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 196.663276] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 196.684857] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 196.684857] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 196.684857] localhost dracut-initqueue[763]: fi" [ 196.684857] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 196.684857] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 196.684857] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 197.453635] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 197.453635] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 197.453635] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 197.453635] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 197.453635] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 197.453635] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 197.453635] localhost dracut-initqueue[763]: log_debug() { [ 197.453635] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 197.453635] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 197.453635] localhost dracut-initqueue[763]: } [ 197.453635] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 197.453635] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 197.453635] localhost dracut-initqueue[763]: result=0 [ 197.453635] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 197.453635] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 197.453635] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 197.453635] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 197.453635] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 197.453635] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 197.453635] localhost dracut-initqueue[763]: continue [ 197.453635] localhost dracut-initqueue[763]: fi [ 197.453635] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 197.453635] localhost dracut-initqueue[763]: is_bindmount=$? [ 197.453635] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 197.453635] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 197.453635] localhost dracut-initqueue[763]: continue [ 197.453635] localhost dracut-initqueue[763]: fi [ 197.453635] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 197.453635] localhost dracut-initqueue[763]: is_nofail=$? [ 197.453635] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 197.453635] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 197.453635] localhost dracut-initqueue[763]: continue [ 197.453635] localhost dracut-initqueue[763]: fi [ 197.453635] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 197.453635] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 197.453635] localhost dracut-initqueue[763]: result=1 [ 197.453635] localhost dracut-initqueue[763]: fi [ 197.453635] localhost dracut-initqueue[763]: done [ 197.453635] localhost dracut-initqueue[763]: return $result [ 197.453635] localhost dracut-initqueue[763]: } [ 197.453635] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 197.453635] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 197.473235] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 197.473235] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 197.473235] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 197.473235] localhost dracut-initqueue[763]: fi" [ 197.473235] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 197.473235] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 197.473235] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 198.195853] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 198.196653] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 198.196653] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 198.198265] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 198.198265] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 198.198265] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 198.198265] localhost dracut-initqueue[763]: log_debug() { [ 198.198265] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 198.198265] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 198.198265] localhost dracut-initqueue[763]: } [ 198.198265] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 198.198265] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 198.198265] localhost dracut-initqueue[763]: result=0 [ 198.198265] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 198.198265] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 198.198265] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 198.198265] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 198.198265] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 198.198265] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 198.198265] localhost dracut-initqueue[763]: continue [ 198.198265] localhost dracut-initqueue[763]: fi [ 198.198265] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 198.198265] localhost dracut-initqueue[763]: is_bindmount=$? [ 198.198265] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 198.198265] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 198.198265] localhost dracut-initqueue[763]: continue [ 198.198265] localhost dracut-initqueue[763]: fi [ 198.198265] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 198.198265] localhost dracut-initqueue[763]: is_nofail=$? [ 198.198265] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 198.198265] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 198.198265] localhost dracut-initqueue[763]: continue [ 198.198265] localhost dracut-initqueue[763]: fi [ 198.198265] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 198.198265] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 198.198265] localhost dracut-initqueue[763]: result=1 [ 198.198265] localhost dracut-initqueue[763]: fi [ 198.198265] localhost dracut-initqueue[763]: done [ 198.198265] localhost dracut-initqueue[763]: return $result [ 198.198265] localhost dracut-initqueue[763]: } [ 198.198265] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 198.198265] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 198.198265] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 198.217332] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 198.217332] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 198.217332] localhost dracut-initqueue[763]: fi" [ 198.217332] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 198.217332] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 198.217332] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 198.958507] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 198.960197] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 198.960197] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 198.962540] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 198.962540] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 198.962540] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 198.962540] localhost dracut-initqueue[763]: log_debug() { [ 198.962540] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 198.962540] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 198.962540] localhost dracut-initqueue[763]: } [ 198.962540] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 198.962540] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 198.962540] localhost dracut-initqueue[763]: result=0 [ 198.962540] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 198.962540] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 198.962540] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 198.962540] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 198.962540] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 198.962540] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 198.962540] localhost dracut-initqueue[763]: continue [ 198.962540] localhost dracut-initqueue[763]: fi [ 198.962540] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 198.962540] localhost dracut-initqueue[763]: is_bindmount=$? [ 198.962540] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 198.962540] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 198.962540] localhost dracut-initqueue[763]: continue [ 198.962540] localhost dracut-initqueue[763]: fi [ 198.962540] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 198.962540] localhost dracut-initqueue[763]: is_nofail=$? [ 198.962540] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 198.962540] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 198.962540] localhost dracut-initqueue[763]: continue [ 198.962540] localhost dracut-initqueue[763]: fi [ 198.962540] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 198.962540] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 198.962540] localhost dracut-initqueue[763]: result=1 [ 198.962540] localhost dracut-initqueue[763]: fi [ 198.962540] localhost dracut-initqueue[763]: done [ 198.962540] localhost dracut-initqueue[763]: return $result [ 198.962540] localhost dracut-initqueue[763]: } [ 198.962540] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 198.962540] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 198.962540] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 198.980378] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 198.980378] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 198.980378] localhost dracut-initqueue[763]: fi" [ 198.983038] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 198.985146] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 198.986048] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 199.702472] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 199.703915] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 199.703915] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 199.706243] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 199.706243] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 199.706243] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 199.706243] localhost dracut-initqueue[763]: log_debug() { [ 199.706243] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 199.706243] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 199.706243] localhost dracut-initqueue[763]: } [ 199.706243] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 199.706243] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 199.706243] localhost dracut-initqueue[763]: result=0 [ 199.706243] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 199.706243] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 199.706243] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 199.706243] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 199.706243] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 199.706243] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 199.706243] localhost dracut-initqueue[763]: continue [ 199.706243] localhost dracut-initqueue[763]: fi [ 199.706243] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 199.706243] localhost dracut-initqueue[763]: is_bindmount=$? [ 199.706243] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 199.706243] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 199.706243] localhost dracut-initqueue[763]: continue [ 199.706243] localhost dracut-initqueue[763]: fi [ 199.706243] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 199.706243] localhost dracut-initqueue[763]: is_nofail=$? [ 199.706243] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 199.706243] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 199.706243] localhost dracut-initqueue[763]: continue [ 199.706243] localhost dracut-initqueue[763]: fi [ 199.706243] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 199.706243] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 199.706243] localhost dracut-initqueue[763]: result=1 [ 199.706243] localhost dracut-initqueue[763]: fi [ 199.706243] localhost dracut-initqueue[763]: done [ 199.706243] localhost dracut-initqueue[763]: return $result [ 199.706243] localhost dracut-initqueue[763]: } [ 199.706243] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 199.706243] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 199.706243] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 199.723724] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 199.723724] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 199.723724] localhost dracut-initqueue[763]: fi" [ 199.726393] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 199.727972] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 199.728859] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 200.458785] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 200.463675] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 200.463675] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 200.467854] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 200.467854] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 200.467854] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 200.467854] localhost dracut-initqueue[763]: log_debug() { [ 200.467854] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 200.467854] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 200.467854] localhost dracut-initqueue[763]: } [ 200.467854] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 200.467854] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 200.467854] localhost dracut-initqueue[763]: result=0 [ 200.467854] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 200.467854] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 200.467854] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 200.467854] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 200.467854] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 200.467854] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 200.467854] localhost dracut-initqueue[763]: continue [ 200.467854] localhost dracut-initqueue[763]: fi [ 200.467854] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 200.467854] localhost dracut-initqueue[763]: is_bindmount=$? [ 200.467854] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 200.467854] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 200.467854] localhost dracut-initqueue[763]: continue [ 200.467854] localhost dracut-initqueue[763]: fi [ 200.467854] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 200.467854] localhost dracut-initqueue[763]: is_nofail=$? [ 200.467854] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 200.467854] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 200.467854] localhost dracut-initqueue[763]: continue [ 200.467854] localhost dracut-initqueue[763]: fi [ 200.467854] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 200.467854] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 200.467854] localhost dracut-initqueue[763]: result=1 [ 200.467854] localhost dracut-initqueue[763]: fi [ 200.467854] localhost dracut-initqueue[763]: done [ 200.467854] localhost dracut-initqueue[763]: return $result [ 200.467854] localhost dracut-initqueue[763]: } [ 200.467854] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 200.467854] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 200.467854] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 200.489689] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 200.489689] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 200.489689] localhost dracut-initqueue[763]: fi" [ 200.489689] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 200.489689] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 200.489689] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 201.184470] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 201.185382] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 201.185382] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 201.187019] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 201.187019] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 201.187019] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 201.187019] localhost dracut-initqueue[763]: log_debug() { [ 201.187019] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 201.187019] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 201.187019] localhost dracut-initqueue[763]: } [ 201.187019] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 201.187019] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 201.187019] localhost dracut-initqueue[763]: result=0 [ 201.187019] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 201.187019] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 201.187019] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 201.187019] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 201.187019] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 201.187019] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 201.187019] localhost dracut-initqueue[763]: continue [ 201.187019] localhost dracut-initqueue[763]: fi [ 201.187019] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 201.187019] localhost dracut-initqueue[763]: is_bindmount=$? [ 201.187019] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 201.187019] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 201.187019] localhost dracut-initqueue[763]: continue [ 201.187019] localhost dracut-initqueue[763]: fi [ 201.187019] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 201.187019] localhost dracut-initqueue[763]: is_nofail=$? [ 201.187019] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 201.187019] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 201.187019] localhost dracut-initqueue[763]: continue [ 201.187019] localhost dracut-initqueue[763]: fi [ 201.187019] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 201.187019] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 201.187019] localhost dracut-initqueue[763]: result=1 [ 201.187019] localhost dracut-initqueue[763]: fi [ 201.187019] localhost dracut-initqueue[763]: done [ 201.187019] localhost dracut-initqueue[763]: return $result [ 201.187019] localhost dracut-initqueue[763]: } [ 201.187019] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 201.187019] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 201.187019] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 201.187019] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 201.187019] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 201.187019] localhost dracut-initqueue[763]: fi" [ 201.206309] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 201.206309] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 201.206309] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 201.974112] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 201.976120] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 201.976120] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 201.976120] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 201.976120] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 201.976120] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 201.976120] localhost dracut-initqueue[763]: log_debug() { [ 201.976120] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 201.976120] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 201.976120] localhost dracut-initqueue[763]: } [ 201.976120] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 201.976120] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 201.976120] localhost dracut-initqueue[763]: result=0 [ 201.976120] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 201.976120] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 201.976120] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 201.976120] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 201.976120] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 201.976120] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 201.976120] localhost dracut-initqueue[763]: continue [ 201.976120] localhost dracut-initqueue[763]: fi [ 201.976120] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 201.976120] localhost dracut-initqueue[763]: is_bindmount=$? [ 201.976120] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 201.976120] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 201.976120] localhost dracut-initqueue[763]: continue [ 201.976120] localhost dracut-initqueue[763]: fi [ 201.976120] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 201.976120] localhost dracut-initqueue[763]: is_nofail=$? [ 201.976120] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 201.976120] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 201.976120] localhost dracut-initqueue[763]: continue [ 201.976120] localhost dracut-initqueue[763]: fi [ 201.976120] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 201.976120] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 201.976120] localhost dracut-initqueue[763]: result=1 [ 201.976120] localhost dracut-initqueue[763]: fi [ 201.976120] localhost dracut-initqueue[763]: done [ 201.976120] localhost dracut-initqueue[763]: return $result [ 201.976120] localhost dracut-initqueue[763]: } [ 201.976120] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 201.976120] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 201.976120] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 202.008167] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 202.008167] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 202.008167] localhost dracut-initqueue[763]: fi" [ 202.008167] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 202.008167] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 202.008167] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 202.746410] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 202.747880] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 202.747880] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 202.750477] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 202.750477] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 202.750477] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 202.750477] localhost dracut-initqueue[763]: log_debug() { [ 202.750477] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 202.750477] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 202.750477] localhost dracut-initqueue[763]: } [ 202.750477] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 202.750477] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 202.750477] localhost dracut-initqueue[763]: result=0 [ 202.750477] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 202.750477] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 202.750477] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 202.750477] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 202.750477] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 202.750477] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 202.750477] localhost dracut-initqueue[763]: continue [ 202.750477] localhost dracut-initqueue[763]: fi [ 202.750477] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 202.750477] localhost dracut-initqueue[763]: is_bindmount=$? [ 202.750477] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 202.750477] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 202.750477] localhost dracut-initqueue[763]: continue [ 202.750477] localhost dracut-initqueue[763]: fi [ 202.750477] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 202.750477] localhost dracut-initqueue[763]: is_nofail=$? [ 202.750477] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 202.750477] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 202.750477] localhost dracut-initqueue[763]: continue [ 202.750477] localhost dracut-initqueue[763]: fi [ 202.750477] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 202.750477] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 202.750477] localhost dracut-initqueue[763]: result=1 [ 202.750477] localhost dracut-initqueue[763]: fi [ 202.750477] localhost dracut-initqueue[763]: done [ 202.750477] localhost dracut-initqueue[763]: return $result [ 202.750477] localhost dracut-initqueue[763]: } [ 202.750477] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 202.750477] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 202.750477] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 202.768823] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 202.768823] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 202.768823] localhost dracut-initqueue[763]: fi" [ 202.770873] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 202.770873] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 202.772323] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 203.527891] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 203.528934] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 203.528934] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 203.532194] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 203.532194] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 203.532194] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 203.532194] localhost dracut-initqueue[763]: log_debug() { [ 203.532194] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 203.532194] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 203.532194] localhost dracut-initqueue[763]: } [ 203.532194] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 203.532194] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 203.532194] localhost dracut-initqueue[763]: result=0 [ 203.532194] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 203.532194] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 203.532194] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 203.532194] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 203.532194] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 203.532194] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 203.532194] localhost dracut-initqueue[763]: continue [ 203.532194] localhost dracut-initqueue[763]: fi [ 203.532194] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 203.532194] localhost dracut-initqueue[763]: is_bindmount=$? [ 203.532194] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 203.532194] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 203.532194] localhost dracut-initqueue[763]: continue [ 203.532194] localhost dracut-initqueue[763]: fi [ 203.532194] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 203.532194] localhost dracut-initqueue[763]: is_nofail=$? [ 203.532194] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 203.532194] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 203.532194] localhost dracut-initqueue[763]: continue [ 203.532194] localhost dracut-initqueue[763]: fi [ 203.532194] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 203.532194] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 203.532194] localhost dracut-initqueue[763]: result=1 [ 203.532194] localhost dracut-initqueue[763]: fi [ 203.532194] localhost dracut-initqueue[763]: done [ 203.532194] localhost dracut-initqueue[763]: return $result [ 203.532194] localhost dracut-initqueue[763]: } [ 203.532194] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 203.532194] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 203.532194] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 203.532194] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 203.532194] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 203.532194] localhost dracut-initqueue[763]: fi" [ 203.558507] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 203.558507] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 203.558507] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 204.287779] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 204.288981] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 204.288981] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 204.291535] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 204.291535] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 204.291535] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 204.291535] localhost dracut-initqueue[763]: log_debug() { [ 204.291535] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 204.291535] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 204.291535] localhost dracut-initqueue[763]: } [ 204.291535] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 204.291535] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 204.291535] localhost dracut-initqueue[763]: result=0 [ 204.291535] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 204.291535] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 204.291535] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 204.291535] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 204.291535] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 204.291535] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 204.291535] localhost dracut-initqueue[763]: continue [ 204.291535] localhost dracut-initqueue[763]: fi [ 204.291535] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 204.291535] localhost dracut-initqueue[763]: is_bindmount=$? [ 204.291535] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 204.291535] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 204.291535] localhost dracut-initqueue[763]: continue [ 204.291535] localhost dracut-initqueue[763]: fi [ 204.291535] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 204.291535] localhost dracut-initqueue[763]: is_nofail=$? [ 204.291535] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 204.291535] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 204.291535] localhost dracut-initqueue[763]: continue [ 204.291535] localhost dracut-initqueue[763]: fi [ 204.291535] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 204.291535] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 204.291535] localhost dracut-initqueue[763]: result=1 [ 204.291535] localhost dracut-initqueue[763]: fi [ 204.291535] localhost dracut-initqueue[763]: done [ 204.291535] localhost dracut-initqueue[763]: return $result [ 204.291535] localhost dracut-initqueue[763]: } [ 204.291535] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 204.291535] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 204.291535] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 204.291535] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 204.291535] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 204.291535] localhost dracut-initqueue[763]: fi" [ 204.318896] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 204.320212] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 204.320212] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 205.066116] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 205.067804] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 205.067804] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 205.070812] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 205.070812] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 205.070812] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 205.070812] localhost dracut-initqueue[763]: log_debug() { [ 205.070812] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 205.070812] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 205.070812] localhost dracut-initqueue[763]: } [ 205.070812] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 205.070812] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 205.070812] localhost dracut-initqueue[763]: result=0 [ 205.070812] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 205.070812] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 205.070812] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 205.070812] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 205.070812] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 205.070812] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 205.070812] localhost dracut-initqueue[763]: continue [ 205.070812] localhost dracut-initqueue[763]: fi [ 205.070812] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 205.070812] localhost dracut-initqueue[763]: is_bindmount=$? [ 205.070812] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 205.070812] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 205.070812] localhost dracut-initqueue[763]: continue [ 205.070812] localhost dracut-initqueue[763]: fi [ 205.070812] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 205.070812] localhost dracut-initqueue[763]: is_nofail=$? [ 205.070812] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 205.070812] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 205.070812] localhost dracut-initqueue[763]: continue [ 205.070812] localhost dracut-initqueue[763]: fi [ 205.070812] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 205.070812] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 205.070812] localhost dracut-initqueue[763]: result=1 [ 205.070812] localhost dracut-initqueue[763]: fi [ 205.070812] localhost dracut-initqueue[763]: done [ 205.070812] localhost dracut-initqueue[763]: return $result [ 205.070812] localhost dracut-initqueue[763]: } [ 205.070812] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 205.070812] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 205.070812] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 205.095781] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 205.095781] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 205.095781] localhost dracut-initqueue[763]: fi" [ 205.095781] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 205.095781] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 205.095781] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 205.787848] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 205.789363] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 205.789363] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 205.792359] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 205.792359] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 205.792359] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 205.792359] localhost dracut-initqueue[763]: log_debug() { [ 205.792359] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 205.792359] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 205.792359] localhost dracut-initqueue[763]: } [ 205.792359] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 205.792359] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 205.792359] localhost dracut-initqueue[763]: result=0 [ 205.792359] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 205.792359] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 205.792359] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 205.792359] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 205.792359] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 205.792359] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 205.792359] localhost dracut-initqueue[763]: continue [ 205.792359] localhost dracut-initqueue[763]: fi [ 205.792359] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 205.792359] localhost dracut-initqueue[763]: is_bindmount=$? [ 205.792359] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 205.792359] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 205.792359] localhost dracut-initqueue[763]: continue [ 205.792359] localhost dracut-initqueue[763]: fi [ 205.792359] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 205.792359] localhost dracut-initqueue[763]: is_nofail=$? [ 205.792359] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 205.792359] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 205.792359] localhost dracut-initqueue[763]: continue [ 205.792359] localhost dracut-initqueue[763]: fi [ 205.792359] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 205.792359] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 205.792359] localhost dracut-initqueue[763]: result=1 [ 205.792359] localhost dracut-initqueue[763]: fi [ 205.792359] localhost dracut-initqueue[763]: done [ 205.792359] localhost dracut-initqueue[763]: return $result [ 205.792359] localhost dracut-initqueue[763]: } [ 205.792359] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 205.792359] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 205.792359] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 205.811058] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 205.811058] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 205.811058] localhost dracut-initqueue[763]: fi" [ 205.813880] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 205.815362] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 205.817121] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 206.579099] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 206.580512] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 206.580512] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 206.582873] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 206.582873] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 206.582873] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 206.582873] localhost dracut-initqueue[763]: log_debug() { [ 206.582873] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 206.582873] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 206.582873] localhost dracut-initqueue[763]: } [ 206.582873] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 206.582873] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 206.582873] localhost dracut-initqueue[763]: result=0 [ 206.582873] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 206.582873] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 206.582873] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 206.582873] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 206.582873] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 206.582873] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 206.582873] localhost dracut-initqueue[763]: continue [ 206.582873] localhost dracut-initqueue[763]: fi [ 206.582873] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 206.582873] localhost dracut-initqueue[763]: is_bindmount=$? [ 206.582873] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 206.582873] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 206.582873] localhost dracut-initqueue[763]: continue [ 206.582873] localhost dracut-initqueue[763]: fi [ 206.582873] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 206.582873] localhost dracut-initqueue[763]: is_nofail=$? [ 206.582873] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 206.582873] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 206.582873] localhost dracut-initqueue[763]: continue [ 206.582873] localhost dracut-initqueue[763]: fi [ 206.582873] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 206.582873] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 206.582873] localhost dracut-initqueue[763]: result=1 [ 206.582873] localhost dracut-initqueue[763]: fi [ 206.582873] localhost dracut-initqueue[763]: done [ 206.582873] localhost dracut-initqueue[763]: return $result [ 206.582873] localhost dracut-initqueue[763]: } [ 206.582873] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 206.582873] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 206.582873] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 206.600256] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 206.600256] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 206.600256] localhost dracut-initqueue[763]: fi" [ 206.600256] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 206.600256] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 206.600256] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 207.301430] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 207.302884] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 207.302884] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 207.305275] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 207.305275] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 207.305275] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 207.305275] localhost dracut-initqueue[763]: log_debug() { [ 207.305275] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 207.305275] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 207.305275] localhost dracut-initqueue[763]: } [ 207.305275] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 207.305275] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 207.305275] localhost dracut-initqueue[763]: result=0 [ 207.305275] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 207.305275] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 207.305275] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 207.305275] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 207.305275] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 207.305275] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 207.305275] localhost dracut-initqueue[763]: continue [ 207.305275] localhost dracut-initqueue[763]: fi [ 207.305275] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 207.305275] localhost dracut-initqueue[763]: is_bindmount=$? [ 207.305275] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 207.305275] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 207.305275] localhost dracut-initqueue[763]: continue [ 207.305275] localhost dracut-initqueue[763]: fi [ 207.305275] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 207.305275] localhost dracut-initqueue[763]: is_nofail=$? [ 207.305275] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 207.305275] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 207.305275] localhost dracut-initqueue[763]: continue [ 207.305275] localhost dracut-initqueue[763]: fi [ 207.305275] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 207.305275] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 207.305275] localhost dracut-initqueue[763]: result=1 [ 207.305275] localhost dracut-initqueue[763]: fi [ 207.305275] localhost dracut-initqueue[763]: done [ 207.305275] localhost dracut-initqueue[763]: return $result [ 207.305275] localhost dracut-initqueue[763]: } [ 207.305275] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 207.305275] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 207.305275] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 207.324050] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 207.324050] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 207.324050] localhost dracut-initqueue[763]: fi" [ 207.327082] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 207.327967] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 207.329623] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 208.094653] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 208.096504] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 208.096504] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 208.096504] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 208.096504] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 208.096504] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 208.096504] localhost dracut-initqueue[763]: log_debug() { [ 208.096504] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 208.096504] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 208.096504] localhost dracut-initqueue[763]: } [ 208.096504] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 208.096504] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 208.096504] localhost dracut-initqueue[763]: result=0 [ 208.096504] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 208.096504] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 208.096504] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 208.096504] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 208.096504] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 208.096504] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 208.096504] localhost dracut-initqueue[763]: continue [ 208.096504] localhost dracut-initqueue[763]: fi [ 208.096504] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 208.096504] localhost dracut-initqueue[763]: is_bindmount=$? [ 208.096504] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 208.096504] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 208.096504] localhost dracut-initqueue[763]: continue [ 208.096504] localhost dracut-initqueue[763]: fi [ 208.096504] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 208.096504] localhost dracut-initqueue[763]: is_nofail=$? [ 208.096504] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 208.096504] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 208.096504] localhost dracut-initqueue[763]: continue [ 208.096504] localhost dracut-initqueue[763]: fi [ 208.096504] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 208.096504] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 208.096504] localhost dracut-initqueue[763]: result=1 [ 208.096504] localhost dracut-initqueue[763]: fi [ 208.096504] localhost dracut-initqueue[763]: done [ 208.096504] localhost dracut-initqueue[763]: return $result [ 208.096504] localhost dracut-initqueue[763]: } [ 208.096504] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 208.096504] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 208.096504] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 208.117392] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 208.117392] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 208.117392] localhost dracut-initqueue[763]: fi" [ 208.117392] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 208.117392] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 208.117392] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 208.822995] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 208.825052] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 208.825052] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 208.827259] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 208.827259] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 208.827259] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 208.827259] localhost dracut-initqueue[763]: log_debug() { [ 208.827259] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 208.827259] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 208.827259] localhost dracut-initqueue[763]: } [ 208.827259] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 208.827259] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 208.827259] localhost dracut-initqueue[763]: result=0 [ 208.827259] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 208.827259] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 208.827259] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 208.827259] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 208.827259] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 208.827259] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 208.827259] localhost dracut-initqueue[763]: continue [ 208.827259] localhost dracut-initqueue[763]: fi [ 208.827259] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 208.827259] localhost dracut-initqueue[763]: is_bindmount=$? [ 208.827259] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 208.827259] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 208.827259] localhost dracut-initqueue[763]: continue [ 208.827259] localhost dracut-initqueue[763]: fi [ 208.827259] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 208.827259] localhost dracut-initqueue[763]: is_nofail=$? [ 208.827259] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 208.827259] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 208.827259] localhost dracut-initqueue[763]: continue [ 208.827259] localhost dracut-initqueue[763]: fi [ 208.827259] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 208.827259] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 208.827259] localhost dracut-initqueue[763]: result=1 [ 208.827259] localhost dracut-initqueue[763]: fi [ 208.827259] localhost dracut-initqueue[763]: done [ 208.827259] localhost dracut-initqueue[763]: return $result [ 208.827259] localhost dracut-initqueue[763]: } [ 208.827259] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 208.827259] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 208.827259] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 208.848980] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 208.848980] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 208.848980] localhost dracut-initqueue[763]: fi" [ 208.852010] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 208.854360] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 208.855559] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 209.612924] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 209.613994] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 209.613994] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 209.615790] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 209.615790] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 209.615790] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 209.615790] localhost dracut-initqueue[763]: log_debug() { [ 209.615790] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 209.615790] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 209.615790] localhost dracut-initqueue[763]: } [ 209.615790] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 209.615790] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 209.615790] localhost dracut-initqueue[763]: result=0 [ 209.615790] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 209.615790] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 209.615790] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 209.615790] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 209.615790] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 209.615790] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 209.615790] localhost dracut-initqueue[763]: continue [ 209.615790] localhost dracut-initqueue[763]: fi [ 209.615790] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 209.615790] localhost dracut-initqueue[763]: is_bindmount=$? [ 209.615790] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 209.615790] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 209.615790] localhost dracut-initqueue[763]: continue [ 209.615790] localhost dracut-initqueue[763]: fi [ 209.615790] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 209.615790] localhost dracut-initqueue[763]: is_nofail=$? [ 209.615790] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 209.615790] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 209.615790] localhost dracut-initqueue[763]: continue [ 209.615790] localhost dracut-initqueue[763]: fi [ 209.615790] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 209.615790] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 209.615790] localhost dracut-initqueue[763]: result=1 [ 209.615790] localhost dracut-initqueue[763]: fi [ 209.615790] localhost dracut-initqueue[763]: done [ 209.615790] localhost dracut-initqueue[763]: return $result [ 209.615790] localhost dracut-initqueue[763]: } [ 209.615790] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 209.615790] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 209.615790] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 209.615790] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 209.615790] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 209.615790] localhost dracut-initqueue[763]: fi" [ 209.636772] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 209.636772] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 209.636772] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 210.372819] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 210.374167] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 210.374167] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 210.376433] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 210.376433] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 210.376433] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 210.376433] localhost dracut-initqueue[763]: log_debug() { [ 210.376433] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 210.376433] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 210.376433] localhost dracut-initqueue[763]: } [ 210.376433] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 210.376433] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 210.376433] localhost dracut-initqueue[763]: result=0 [ 210.376433] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 210.376433] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 210.376433] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 210.376433] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 210.376433] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 210.376433] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 210.376433] localhost dracut-initqueue[763]: continue [ 210.376433] localhost dracut-initqueue[763]: fi [ 210.376433] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 210.376433] localhost dracut-initqueue[763]: is_bindmount=$? [ 210.376433] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 210.376433] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 210.376433] localhost dracut-initqueue[763]: continue [ 210.376433] localhost dracut-initqueue[763]: fi [ 210.376433] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 210.376433] localhost dracut-initqueue[763]: is_nofail=$? [ 210.376433] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 210.376433] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 210.376433] localhost dracut-initqueue[763]: continue [ 210.376433] localhost dracut-initqueue[763]: fi [ 210.376433] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 210.376433] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 210.376433] localhost dracut-initqueue[763]: result=1 [ 210.376433] localhost dracut-initqueue[763]: fi [ 210.376433] localhost dracut-initqueue[763]: done [ 210.376433] localhost dracut-initqueue[763]: return $result [ 210.376433] localhost dracut-initqueue[763]: } [ 210.376433] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 210.376433] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 210.376433] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 210.394386] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 210.394386] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 210.394386] localhost dracut-initqueue[763]: fi" [ 210.394386] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 210.394386] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 210.394386] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 211.134754] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 211.137077] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 211.137077] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 211.139091] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 211.139091] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 211.139091] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 211.139091] localhost dracut-initqueue[763]: log_debug() { [ 211.139091] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 211.139091] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 211.139091] localhost dracut-initqueue[763]: } [ 211.139091] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 211.139091] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 211.139091] localhost dracut-initqueue[763]: result=0 [ 211.139091] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 211.139091] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 211.139091] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 211.139091] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 211.139091] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 211.139091] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 211.139091] localhost dracut-initqueue[763]: continue [ 211.139091] localhost dracut-initqueue[763]: fi [ 211.139091] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 211.139091] localhost dracut-initqueue[763]: is_bindmount=$? [ 211.139091] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 211.139091] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 211.139091] localhost dracut-initqueue[763]: continue [ 211.139091] localhost dracut-initqueue[763]: fi [ 211.139091] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 211.139091] localhost dracut-initqueue[763]: is_nofail=$? [ 211.139091] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 211.139091] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 211.139091] localhost dracut-initqueue[763]: continue [ 211.139091] localhost dracut-initqueue[763]: fi [ 211.139091] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 211.139091] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 211.139091] localhost dracut-initqueue[763]: result=1 [ 211.139091] localhost dracut-initqueue[763]: fi [ 211.139091] localhost dracut-initqueue[763]: done [ 211.139091] localhost dracut-initqueue[763]: return $result [ 211.139091] localhost dracut-initqueue[763]: } [ 211.139091] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 211.139091] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 211.139091] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 211.139091] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 211.139091] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 211.139091] localhost dracut-initqueue[763]: fi" [ 211.161798] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 211.161798] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 211.161798] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 211.895319] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 211.896100] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 211.896100] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 211.898849] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 211.898849] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 211.898849] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 211.898849] localhost dracut-initqueue[763]: log_debug() { [ 211.898849] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 211.898849] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 211.898849] localhost dracut-initqueue[763]: } [ 211.898849] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 211.898849] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 211.898849] localhost dracut-initqueue[763]: result=0 [ 211.898849] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 211.898849] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 211.898849] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 211.898849] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 211.898849] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 211.898849] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 211.898849] localhost dracut-initqueue[763]: continue [ 211.898849] localhost dracut-initqueue[763]: fi [ 211.898849] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 211.898849] localhost dracut-initqueue[763]: is_bindmount=$? [ 211.898849] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 211.898849] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 211.898849] localhost dracut-initqueue[763]: continue [ 211.898849] localhost dracut-initqueue[763]: fi [ 211.898849] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 211.898849] localhost dracut-initqueue[763]: is_nofail=$? [ 211.898849] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 211.898849] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 211.898849] localhost dracut-initqueue[763]: continue [ 211.898849] localhost dracut-initqueue[763]: fi [ 211.898849] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 211.898849] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 211.898849] localhost dracut-initqueue[763]: result=1 [ 211.898849] localhost dracut-initqueue[763]: fi [ 211.898849] localhost dracut-initqueue[763]: done [ 211.898849] localhost dracut-initqueue[763]: return $result [ 211.898849] localhost dracut-initqueue[763]: } [ 211.898849] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 211.898849] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 211.898849] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 211.898849] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 211.898849] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 211.898849] localhost dracut-initqueue[763]: fi" [ 211.917908] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 211.917908] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 211.917908] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 212.633737] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 212.635168] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 212.635168] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 212.635168] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 212.635168] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 212.635168] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 212.635168] localhost dracut-initqueue[763]: log_debug() { [ 212.635168] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 212.635168] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 212.635168] localhost dracut-initqueue[763]: } [ 212.635168] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 212.635168] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 212.635168] localhost dracut-initqueue[763]: result=0 [ 212.635168] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 212.635168] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 212.635168] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 212.635168] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 212.635168] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 212.635168] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 212.635168] localhost dracut-initqueue[763]: continue [ 212.635168] localhost dracut-initqueue[763]: fi [ 212.635168] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 212.635168] localhost dracut-initqueue[763]: is_bindmount=$? [ 212.635168] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 212.635168] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 212.635168] localhost dracut-initqueue[763]: continue [ 212.635168] localhost dracut-initqueue[763]: fi [ 212.635168] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 212.635168] localhost dracut-initqueue[763]: is_nofail=$? [ 212.635168] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 212.635168] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 212.635168] localhost dracut-initqueue[763]: continue [ 212.635168] localhost dracut-initqueue[763]: fi [ 212.635168] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 212.635168] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 212.635168] localhost dracut-initqueue[763]: result=1 [ 212.635168] localhost dracut-initqueue[763]: fi [ 212.635168] localhost dracut-initqueue[763]: done [ 212.635168] localhost dracut-initqueue[763]: return $result [ 212.635168] localhost dracut-initqueue[763]: } [ 212.635168] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 212.635168] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 212.635168] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 212.654599] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 212.654599] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 212.654599] localhost dracut-initqueue[763]: fi" [ 212.654599] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 212.654599] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 212.654599] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 213.395733] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 213.396428] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 213.396428] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 213.398023] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 213.398023] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 213.398023] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 213.398023] localhost dracut-initqueue[763]: log_debug() { [ 213.398023] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 213.398023] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 213.398023] localhost dracut-initqueue[763]: } [ 213.398023] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 213.398023] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 213.398023] localhost dracut-initqueue[763]: result=0 [ 213.398023] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 213.398023] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 213.398023] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 213.398023] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 213.398023] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 213.398023] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 213.398023] localhost dracut-initqueue[763]: continue [ 213.398023] localhost dracut-initqueue[763]: fi [ 213.398023] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 213.398023] localhost dracut-initqueue[763]: is_bindmount=$? [ 213.398023] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 213.398023] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 213.398023] localhost dracut-initqueue[763]: continue [ 213.398023] localhost dracut-initqueue[763]: fi [ 213.398023] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 213.398023] localhost dracut-initqueue[763]: is_nofail=$? [ 213.398023] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 213.398023] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 213.398023] localhost dracut-initqueue[763]: continue [ 213.398023] localhost dracut-initqueue[763]: fi [ 213.398023] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 213.398023] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 213.398023] localhost dracut-initqueue[763]: result=1 [ 213.398023] localhost dracut-initqueue[763]: fi [ 213.398023] localhost dracut-initqueue[763]: done [ 213.398023] localhost dracut-initqueue[763]: return $result [ 213.398023] localhost dracut-initqueue[763]: } [ 213.398023] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 213.398023] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 213.398023] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 213.423019] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 213.423019] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 213.423019] localhost dracut-initqueue[763]: fi" [ 213.423019] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 213.423019] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 213.423019] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 214.129607] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 214.130832] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 214.130832] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 214.133279] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 214.133279] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 214.133279] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 214.133279] localhost dracut-initqueue[763]: log_debug() { [ 214.133279] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 214.133279] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 214.133279] localhost dracut-initqueue[763]: } [ 214.133279] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 214.133279] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 214.133279] localhost dracut-initqueue[763]: result=0 [ 214.133279] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 214.133279] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 214.133279] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 214.133279] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 214.133279] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 214.133279] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 214.133279] localhost dracut-initqueue[763]: continue [ 214.133279] localhost dracut-initqueue[763]: fi [ 214.133279] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 214.133279] localhost dracut-initqueue[763]: is_bindmount=$? [ 214.133279] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 214.133279] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 214.133279] localhost dracut-initqueue[763]: continue [ 214.133279] localhost dracut-initqueue[763]: fi [ 214.133279] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 214.133279] localhost dracut-initqueue[763]: is_nofail=$? [ 214.133279] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 214.133279] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 214.133279] localhost dracut-initqueue[763]: continue [ 214.133279] localhost dracut-initqueue[763]: fi [ 214.133279] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 214.133279] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 214.133279] localhost dracut-initqueue[763]: result=1 [ 214.133279] localhost dracut-initqueue[763]: fi [ 214.133279] localhost dracut-initqueue[763]: done [ 214.133279] localhost dracut-initqueue[763]: return $result [ 214.133279] localhost dracut-initqueue[763]: } [ 214.133279] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 214.133279] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 214.133279] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 214.133279] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 214.133279] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 214.133279] localhost dracut-initqueue[763]: fi" [ 214.159758] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 214.159758] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 214.159758] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 214.923405] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 214.924253] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 214.924253] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 214.927398] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 214.927398] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 214.927398] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 214.927398] localhost dracut-initqueue[763]: log_debug() { [ 214.927398] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 214.927398] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 214.927398] localhost dracut-initqueue[763]: } [ 214.927398] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 214.927398] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 214.927398] localhost dracut-initqueue[763]: result=0 [ 214.927398] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 214.927398] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 214.927398] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 214.927398] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 214.927398] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 214.927398] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 214.927398] localhost dracut-initqueue[763]: continue [ 214.927398] localhost dracut-initqueue[763]: fi [ 214.927398] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 214.927398] localhost dracut-initqueue[763]: is_bindmount=$? [ 214.927398] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 214.927398] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 214.927398] localhost dracut-initqueue[763]: continue [ 214.927398] localhost dracut-initqueue[763]: fi [ 214.927398] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 214.927398] localhost dracut-initqueue[763]: is_nofail=$? [ 214.927398] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 214.927398] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 214.927398] localhost dracut-initqueue[763]: continue [ 214.927398] localhost dracut-initqueue[763]: fi [ 214.927398] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 214.927398] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 214.927398] localhost dracut-initqueue[763]: result=1 [ 214.927398] localhost dracut-initqueue[763]: fi [ 214.927398] localhost dracut-initqueue[763]: done [ 214.927398] localhost dracut-initqueue[763]: return $result [ 214.927398] localhost dracut-initqueue[763]: } [ 214.927398] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 214.927398] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 214.927398] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 214.927398] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 214.927398] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 214.927398] localhost dracut-initqueue[763]: fi" [ 214.946557] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 214.946557] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 214.946557] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 215.664720] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 215.666208] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 215.666208] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 215.667987] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 215.667987] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 215.667987] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 215.667987] localhost dracut-initqueue[763]: log_debug() { [ 215.667987] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 215.667987] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 215.667987] localhost dracut-initqueue[763]: } [ 215.667987] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 215.667987] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 215.667987] localhost dracut-initqueue[763]: result=0 [ 215.667987] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 215.667987] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 215.667987] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 215.667987] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 215.667987] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 215.667987] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 215.667987] localhost dracut-initqueue[763]: continue [ 215.667987] localhost dracut-initqueue[763]: fi [ 215.667987] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 215.667987] localhost dracut-initqueue[763]: is_bindmount=$? [ 215.667987] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 215.667987] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 215.667987] localhost dracut-initqueue[763]: continue [ 215.667987] localhost dracut-initqueue[763]: fi [ 215.667987] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 215.667987] localhost dracut-initqueue[763]: is_nofail=$? [ 215.667987] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 215.667987] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 215.667987] localhost dracut-initqueue[763]: continue [ 215.667987] localhost dracut-initqueue[763]: fi [ 215.667987] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 215.667987] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 215.667987] localhost dracut-initqueue[763]: result=1 [ 215.667987] localhost dracut-initqueue[763]: fi [ 215.667987] localhost dracut-initqueue[763]: done [ 215.667987] localhost dracut-initqueue[763]: return $result [ 215.667987] localhost dracut-initqueue[763]: } [ 215.667987] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 215.667987] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 215.667987] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 215.687090] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 215.687090] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 215.687090] localhost dracut-initqueue[763]: fi" [ 215.687090] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 215.687090] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 215.687090] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 216.443228] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 216.444813] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 216.444813] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 216.447309] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 216.447309] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 216.447309] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 216.447309] localhost dracut-initqueue[763]: log_debug() { [ 216.447309] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 216.447309] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 216.447309] localhost dracut-initqueue[763]: } [ 216.447309] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 216.447309] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 216.447309] localhost dracut-initqueue[763]: result=0 [ 216.447309] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 216.447309] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 216.447309] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 216.447309] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 216.447309] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 216.447309] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 216.447309] localhost dracut-initqueue[763]: continue [ 216.447309] localhost dracut-initqueue[763]: fi [ 216.447309] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 216.447309] localhost dracut-initqueue[763]: is_bindmount=$? [ 216.447309] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 216.447309] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 216.447309] localhost dracut-initqueue[763]: continue [ 216.447309] localhost dracut-initqueue[763]: fi [ 216.447309] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 216.447309] localhost dracut-initqueue[763]: is_nofail=$? [ 216.447309] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 216.447309] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 216.447309] localhost dracut-initqueue[763]: continue [ 216.447309] localhost dracut-initqueue[763]: fi [ 216.447309] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 216.447309] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 216.447309] localhost dracut-initqueue[763]: result=1 [ 216.447309] localhost dracut-initqueue[763]: fi [ 216.447309] localhost dracut-initqueue[763]: done [ 216.447309] localhost dracut-initqueue[763]: return $result [ 216.447309] localhost dracut-initqueue[763]: } [ 216.447309] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 216.447309] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 216.447309] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 216.466664] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 216.466664] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 216.466664] localhost dracut-initqueue[763]: fi" [ 216.471154] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 216.473438] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 216.474581] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 217.218943] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 217.219911] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 217.219911] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 217.222095] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 217.222095] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 217.222095] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 217.222095] localhost dracut-initqueue[763]: log_debug() { [ 217.222095] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 217.222095] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 217.222095] localhost dracut-initqueue[763]: } [ 217.222095] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 217.222095] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 217.222095] localhost dracut-initqueue[763]: result=0 [ 217.222095] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 217.222095] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 217.222095] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 217.222095] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 217.222095] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 217.222095] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 217.222095] localhost dracut-initqueue[763]: continue [ 217.222095] localhost dracut-initqueue[763]: fi [ 217.222095] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 217.222095] localhost dracut-initqueue[763]: is_bindmount=$? [ 217.222095] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 217.222095] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 217.222095] localhost dracut-initqueue[763]: continue [ 217.222095] localhost dracut-initqueue[763]: fi [ 217.222095] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 217.222095] localhost dracut-initqueue[763]: is_nofail=$? [ 217.222095] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 217.222095] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 217.222095] localhost dracut-initqueue[763]: continue [ 217.222095] localhost dracut-initqueue[763]: fi [ 217.222095] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 217.222095] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 217.222095] localhost dracut-initqueue[763]: result=1 [ 217.222095] localhost dracut-initqueue[763]: fi [ 217.222095] localhost dracut-initqueue[763]: done [ 217.222095] localhost dracut-initqueue[763]: return $result [ 217.222095] localhost dracut-initqueue[763]: } [ 217.222095] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 217.222095] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 217.222095] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 217.240041] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 217.240041] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 217.240041] localhost dracut-initqueue[763]: fi" [ 217.240041] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 217.240041] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 217.240041] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 218.008558] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 218.009543] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 218.009543] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 218.011740] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 218.011740] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 218.011740] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 218.011740] localhost dracut-initqueue[763]: log_debug() { [ 218.011740] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 218.011740] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 218.011740] localhost dracut-initqueue[763]: } [ 218.011740] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 218.011740] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 218.011740] localhost dracut-initqueue[763]: result=0 [ 218.011740] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 218.011740] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 218.011740] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 218.011740] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 218.011740] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 218.011740] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 218.011740] localhost dracut-initqueue[763]: continue [ 218.011740] localhost dracut-initqueue[763]: fi [ 218.011740] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 218.011740] localhost dracut-initqueue[763]: is_bindmount=$? [ 218.011740] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 218.011740] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 218.011740] localhost dracut-initqueue[763]: continue [ 218.011740] localhost dracut-initqueue[763]: fi [ 218.011740] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 218.011740] localhost dracut-initqueue[763]: is_nofail=$? [ 218.011740] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 218.011740] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 218.011740] localhost dracut-initqueue[763]: continue [ 218.011740] localhost dracut-initqueue[763]: fi [ 218.011740] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 218.011740] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 218.011740] localhost dracut-initqueue[763]: result=1 [ 218.011740] localhost dracut-initqueue[763]: fi [ 218.011740] localhost dracut-initqueue[763]: done [ 218.011740] localhost dracut-initqueue[763]: return $result [ 218.011740] localhost dracut-initqueue[763]: } [ 218.011740] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 218.011740] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 218.011740] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 218.011740] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 218.011740] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 218.011740] localhost dracut-initqueue[763]: fi" [ 218.033313] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 218.033313] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 218.033313] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 218.731881] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 218.733503] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 218.733503] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 218.733503] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 218.733503] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 218.733503] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 218.733503] localhost dracut-initqueue[763]: log_debug() { [ 218.733503] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 218.733503] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 218.733503] localhost dracut-initqueue[763]: } [ 218.733503] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 218.733503] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 218.733503] localhost dracut-initqueue[763]: result=0 [ 218.733503] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 218.733503] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 218.733503] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 218.733503] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 218.733503] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 218.733503] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 218.733503] localhost dracut-initqueue[763]: continue [ 218.733503] localhost dracut-initqueue[763]: fi [ 218.733503] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 218.733503] localhost dracut-initqueue[763]: is_bindmount=$? [ 218.733503] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 218.733503] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 218.733503] localhost dracut-initqueue[763]: continue [ 218.733503] localhost dracut-initqueue[763]: fi [ 218.733503] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 218.733503] localhost dracut-initqueue[763]: is_nofail=$? [ 218.733503] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 218.733503] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 218.733503] localhost dracut-initqueue[763]: continue [ 218.733503] localhost dracut-initqueue[763]: fi [ 218.733503] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 218.733503] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 218.733503] localhost dracut-initqueue[763]: result=1 [ 218.733503] localhost dracut-initqueue[763]: fi [ 218.733503] localhost dracut-initqueue[763]: done [ 218.733503] localhost dracut-initqueue[763]: return $result [ 218.733503] localhost dracut-initqueue[763]: } [ 218.733503] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 218.733503] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 218.733503] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 218.760471] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 218.760471] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 218.760471] localhost dracut-initqueue[763]: fi" [ 218.760471] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 218.760471] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 218.760471] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 219.515530] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 219.516240] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 219.516240] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 219.517809] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 219.517809] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 219.517809] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 219.517809] localhost dracut-initqueue[763]: log_debug() { [ 219.517809] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 219.517809] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 219.517809] localhost dracut-initqueue[763]: } [ 219.517809] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 219.517809] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 219.517809] localhost dracut-initqueue[763]: result=0 [ 219.517809] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 219.517809] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 219.517809] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 219.517809] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 219.517809] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 219.517809] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 219.517809] localhost dracut-initqueue[763]: continue [ 219.517809] localhost dracut-initqueue[763]: fi [ 219.517809] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 219.517809] localhost dracut-initqueue[763]: is_bindmount=$? [ 219.517809] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 219.517809] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 219.517809] localhost dracut-initqueue[763]: continue [ 219.517809] localhost dracut-initqueue[763]: fi [ 219.517809] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 219.517809] localhost dracut-initqueue[763]: is_nofail=$? [ 219.517809] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 219.517809] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 219.517809] localhost dracut-initqueue[763]: continue [ 219.517809] localhost dracut-initqueue[763]: fi [ 219.517809] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 219.517809] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 219.517809] localhost dracut-initqueue[763]: result=1 [ 219.517809] localhost dracut-initqueue[763]: fi [ 219.517809] localhost dracut-initqueue[763]: done [ 219.517809] localhost dracut-initqueue[763]: return $result [ 219.517809] localhost dracut-initqueue[763]: } [ 219.517809] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 219.517809] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 219.517809] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 219.517809] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 219.517809] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 219.517809] localhost dracut-initqueue[763]: fi" [ 219.537284] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 219.537284] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 219.537284] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 220.257836] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 220.259145] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 220.259145] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 220.261384] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 220.261384] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 220.261384] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 220.261384] localhost dracut-initqueue[763]: log_debug() { [ 220.261384] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 220.261384] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 220.261384] localhost dracut-initqueue[763]: } [ 220.261384] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 220.261384] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 220.261384] localhost dracut-initqueue[763]: result=0 [ 220.261384] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 220.261384] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 220.261384] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 220.261384] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 220.261384] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 220.261384] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 220.261384] localhost dracut-initqueue[763]: continue [ 220.261384] localhost dracut-initqueue[763]: fi [ 220.261384] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 220.261384] localhost dracut-initqueue[763]: is_bindmount=$? [ 220.261384] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 220.261384] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 220.261384] localhost dracut-initqueue[763]: continue [ 220.261384] localhost dracut-initqueue[763]: fi [ 220.261384] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 220.261384] localhost dracut-initqueue[763]: is_nofail=$? [ 220.261384] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 220.261384] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 220.261384] localhost dracut-initqueue[763]: continue [ 220.261384] localhost dracut-initqueue[763]: fi [ 220.261384] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 220.261384] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 220.261384] localhost dracut-initqueue[763]: result=1 [ 220.261384] localhost dracut-initqueue[763]: fi [ 220.261384] localhost dracut-initqueue[763]: done [ 220.261384] localhost dracut-initqueue[763]: return $result [ 220.261384] localhost dracut-initqueue[763]: } [ 220.261384] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 220.261384] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 220.261384] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 220.279898] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 220.279898] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 220.279898] localhost dracut-initqueue[763]: fi" [ 220.279898] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 220.279898] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 220.284392] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 221.041479] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 221.042335] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 221.042335] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 221.044586] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 221.044586] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 221.044586] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 221.044586] localhost dracut-initqueue[763]: log_debug() { [ 221.044586] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 221.044586] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 221.044586] localhost dracut-initqueue[763]: } [ 221.044586] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 221.044586] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 221.044586] localhost dracut-initqueue[763]: result=0 [ 221.044586] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 221.044586] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 221.044586] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 221.044586] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 221.044586] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 221.044586] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 221.044586] localhost dracut-initqueue[763]: continue [ 221.044586] localhost dracut-initqueue[763]: fi [ 221.044586] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 221.044586] localhost dracut-initqueue[763]: is_bindmount=$? [ 221.044586] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 221.044586] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 221.044586] localhost dracut-initqueue[763]: continue [ 221.044586] localhost dracut-initqueue[763]: fi [ 221.044586] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 221.044586] localhost dracut-initqueue[763]: is_nofail=$? [ 221.044586] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 221.044586] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 221.044586] localhost dracut-initqueue[763]: continue [ 221.044586] localhost dracut-initqueue[763]: fi [ 221.044586] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 221.044586] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 221.044586] localhost dracut-initqueue[763]: result=1 [ 221.044586] localhost dracut-initqueue[763]: fi [ 221.044586] localhost dracut-initqueue[763]: done [ 221.044586] localhost dracut-initqueue[763]: return $result [ 221.044586] localhost dracut-initqueue[763]: } [ 221.044586] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 221.044586] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 221.044586] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 221.044586] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 221.044586] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 221.044586] localhost dracut-initqueue[763]: fi" [ 221.067438] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 221.067438] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 221.067438] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 221.773817] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 221.775373] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 221.775373] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 221.777888] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 221.777888] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 221.777888] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 221.777888] localhost dracut-initqueue[763]: log_debug() { [ 221.777888] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 221.777888] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 221.777888] localhost dracut-initqueue[763]: } [ 221.777888] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 221.777888] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 221.777888] localhost dracut-initqueue[763]: result=0 [ 221.777888] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 221.777888] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 221.777888] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 221.777888] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 221.777888] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 221.777888] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 221.777888] localhost dracut-initqueue[763]: continue [ 221.777888] localhost dracut-initqueue[763]: fi [ 221.777888] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 221.777888] localhost dracut-initqueue[763]: is_bindmount=$? [ 221.777888] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 221.777888] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 221.777888] localhost dracut-initqueue[763]: continue [ 221.777888] localhost dracut-initqueue[763]: fi [ 221.777888] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 221.777888] localhost dracut-initqueue[763]: is_nofail=$? [ 221.777888] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 221.777888] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 221.777888] localhost dracut-initqueue[763]: continue [ 221.777888] localhost dracut-initqueue[763]: fi [ 221.777888] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 221.777888] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 221.777888] localhost dracut-initqueue[763]: result=1 [ 221.777888] localhost dracut-initqueue[763]: fi [ 221.777888] localhost dracut-initqueue[763]: done [ 221.777888] localhost dracut-initqueue[763]: return $result [ 221.777888] localhost dracut-initqueue[763]: } [ 221.777888] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 221.777888] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 221.777888] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 221.798996] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 221.798996] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 221.798996] localhost dracut-initqueue[763]: fi" [ 221.798996] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 221.798996] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 221.798996] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 222.559857] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 222.560686] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 222.560686] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 222.562516] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 222.562516] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 222.562516] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 222.562516] localhost dracut-initqueue[763]: log_debug() { [ 222.562516] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 222.562516] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 222.562516] localhost dracut-initqueue[763]: } [ 222.562516] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 222.562516] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 222.562516] localhost dracut-initqueue[763]: result=0 [ 222.562516] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 222.562516] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 222.562516] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 222.562516] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 222.562516] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 222.562516] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 222.562516] localhost dracut-initqueue[763]: continue [ 222.562516] localhost dracut-initqueue[763]: fi [ 222.562516] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 222.562516] localhost dracut-initqueue[763]: is_bindmount=$? [ 222.562516] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 222.562516] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 222.562516] localhost dracut-initqueue[763]: continue [ 222.562516] localhost dracut-initqueue[763]: fi [ 222.562516] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 222.562516] localhost dracut-initqueue[763]: is_nofail=$? [ 222.562516] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 222.562516] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 222.562516] localhost dracut-initqueue[763]: continue [ 222.562516] localhost dracut-initqueue[763]: fi [ 222.562516] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 222.562516] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 222.562516] localhost dracut-initqueue[763]: result=1 [ 222.562516] localhost dracut-initqueue[763]: fi [ 222.562516] localhost dracut-initqueue[763]: done [ 222.562516] localhost dracut-initqueue[763]: return $result [ 222.562516] localhost dracut-initqueue[763]: } [ 222.562516] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 222.562516] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 222.562516] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 222.579624] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 222.579624] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 222.579624] localhost dracut-initqueue[763]: fi" [ 222.581741] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 222.581741] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 222.583171] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 223.275756] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 223.278048] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 223.278048] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 223.278048] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 223.278048] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 223.278048] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 223.278048] localhost dracut-initqueue[763]: log_debug() { [ 223.278048] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 223.278048] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 223.278048] localhost dracut-initqueue[763]: } [ 223.278048] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 223.278048] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 223.278048] localhost dracut-initqueue[763]: result=0 [ 223.278048] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 223.278048] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 223.278048] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 223.278048] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 223.278048] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 223.278048] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 223.278048] localhost dracut-initqueue[763]: continue [ 223.278048] localhost dracut-initqueue[763]: fi [ 223.278048] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 223.278048] localhost dracut-initqueue[763]: is_bindmount=$? [ 223.278048] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 223.278048] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 223.278048] localhost dracut-initqueue[763]: continue [ 223.278048] localhost dracut-initqueue[763]: fi [ 223.278048] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 223.278048] localhost dracut-initqueue[763]: is_nofail=$? [ 223.278048] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 223.278048] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 223.278048] localhost dracut-initqueue[763]: continue [ 223.278048] localhost dracut-initqueue[763]: fi [ 223.278048] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 223.278048] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 223.278048] localhost dracut-initqueue[763]: result=1 [ 223.278048] localhost dracut-initqueue[763]: fi [ 223.278048] localhost dracut-initqueue[763]: done [ 223.278048] localhost dracut-initqueue[763]: return $result [ 223.278048] localhost dracut-initqueue[763]: } [ 223.278048] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 223.278048] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 223.278048] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 223.301606] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 223.301606] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 223.301606] localhost dracut-initqueue[763]: fi" [ 223.301606] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 223.301606] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 223.301606] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 224.051492] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 224.053017] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 224.053017] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 224.055361] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 224.055361] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 224.055361] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 224.055361] localhost dracut-initqueue[763]: log_debug() { [ 224.055361] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 224.055361] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 224.055361] localhost dracut-initqueue[763]: } [ 224.055361] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 224.055361] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 224.055361] localhost dracut-initqueue[763]: result=0 [ 224.055361] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 224.055361] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 224.055361] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 224.055361] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 224.055361] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 224.055361] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 224.055361] localhost dracut-initqueue[763]: continue [ 224.055361] localhost dracut-initqueue[763]: fi [ 224.055361] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 224.055361] localhost dracut-initqueue[763]: is_bindmount=$? [ 224.055361] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 224.055361] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 224.055361] localhost dracut-initqueue[763]: continue [ 224.055361] localhost dracut-initqueue[763]: fi [ 224.055361] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 224.055361] localhost dracut-initqueue[763]: is_nofail=$? [ 224.055361] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 224.055361] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 224.055361] localhost dracut-initqueue[763]: continue [ 224.055361] localhost dracut-initqueue[763]: fi [ 224.055361] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 224.055361] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 224.055361] localhost dracut-initqueue[763]: result=1 [ 224.055361] localhost dracut-initqueue[763]: fi [ 224.055361] localhost dracut-initqueue[763]: done [ 224.055361] localhost dracut-initqueue[763]: return $result [ 224.055361] localhost dracut-initqueue[763]: } [ 224.055361] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 224.055361] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 224.055361] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 224.073737] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 224.073737] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 224.073737] localhost dracut-initqueue[763]: fi" [ 224.076360] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 224.077916] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 224.079944] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 224.820054] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 224.821573] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 224.821573] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 224.821573] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 224.821573] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 224.821573] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 224.821573] localhost dracut-initqueue[763]: log_debug() { [ 224.821573] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 224.821573] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 224.821573] localhost dracut-initqueue[763]: } [ 224.821573] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 224.821573] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 224.821573] localhost dracut-initqueue[763]: result=0 [ 224.821573] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 224.821573] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 224.821573] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 224.821573] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 224.821573] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 224.821573] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 224.821573] localhost dracut-initqueue[763]: continue [ 224.821573] localhost dracut-initqueue[763]: fi [ 224.821573] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 224.821573] localhost dracut-initqueue[763]: is_bindmount=$? [ 224.821573] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 224.821573] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 224.821573] localhost dracut-initqueue[763]: continue [ 224.821573] localhost dracut-initqueue[763]: fi [ 224.821573] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 224.821573] localhost dracut-initqueue[763]: is_nofail=$? [ 224.821573] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 224.821573] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 224.821573] localhost dracut-initqueue[763]: continue [ 224.821573] localhost dracut-initqueue[763]: fi [ 224.821573] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 224.821573] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 224.821573] localhost dracut-initqueue[763]: result=1 [ 224.821573] localhost dracut-initqueue[763]: fi [ 224.821573] localhost dracut-initqueue[763]: done [ 224.821573] localhost dracut-initqueue[763]: return $result [ 224.821573] localhost dracut-initqueue[763]: } [ 224.821573] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 224.821573] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 224.821573] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 224.841469] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 224.841469] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 224.841469] localhost dracut-initqueue[763]: fi" [ 224.841469] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 224.841469] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 224.841469] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 225.601775] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 225.602539] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 225.602539] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 225.604791] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 225.604791] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 225.604791] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 225.604791] localhost dracut-initqueue[763]: log_debug() { [ 225.604791] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 225.604791] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 225.604791] localhost dracut-initqueue[763]: } [ 225.604791] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 225.604791] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 225.604791] localhost dracut-initqueue[763]: result=0 [ 225.604791] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 225.604791] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 225.604791] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 225.604791] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 225.604791] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 225.604791] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 225.604791] localhost dracut-initqueue[763]: continue [ 225.604791] localhost dracut-initqueue[763]: fi [ 225.604791] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 225.604791] localhost dracut-initqueue[763]: is_bindmount=$? [ 225.604791] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 225.604791] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 225.604791] localhost dracut-initqueue[763]: continue [ 225.604791] localhost dracut-initqueue[763]: fi [ 225.604791] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 225.604791] localhost dracut-initqueue[763]: is_nofail=$? [ 225.604791] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 225.604791] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 225.604791] localhost dracut-initqueue[763]: continue [ 225.604791] localhost dracut-initqueue[763]: fi [ 225.604791] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 225.604791] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 225.604791] localhost dracut-initqueue[763]: result=1 [ 225.604791] localhost dracut-initqueue[763]: fi [ 225.604791] localhost dracut-initqueue[763]: done [ 225.604791] localhost dracut-initqueue[763]: return $result [ 225.604791] localhost dracut-initqueue[763]: } [ 225.604791] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 225.604791] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 225.604791] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 225.622720] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 225.622720] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 225.622720] localhost dracut-initqueue[763]: fi" [ 225.622720] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 225.627597] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 225.628726] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 226.341342] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 226.342892] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 226.342892] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 226.344784] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 226.344784] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 226.344784] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 226.344784] localhost dracut-initqueue[763]: log_debug() { [ 226.344784] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 226.344784] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 226.344784] localhost dracut-initqueue[763]: } [ 226.344784] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 226.344784] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 226.344784] localhost dracut-initqueue[763]: result=0 [ 226.344784] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 226.344784] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 226.344784] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 226.344784] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 226.344784] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 226.344784] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 226.344784] localhost dracut-initqueue[763]: continue [ 226.344784] localhost dracut-initqueue[763]: fi [ 226.344784] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 226.344784] localhost dracut-initqueue[763]: is_bindmount=$? [ 226.344784] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 226.344784] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 226.344784] localhost dracut-initqueue[763]: continue [ 226.344784] localhost dracut-initqueue[763]: fi [ 226.344784] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 226.344784] localhost dracut-initqueue[763]: is_nofail=$? [ 226.344784] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 226.344784] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 226.344784] localhost dracut-initqueue[763]: continue [ 226.344784] localhost dracut-initqueue[763]: fi [ 226.344784] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 226.344784] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 226.344784] localhost dracut-initqueue[763]: result=1 [ 226.344784] localhost dracut-initqueue[763]: fi [ 226.344784] localhost dracut-initqueue[763]: done [ 226.344784] localhost dracut-initqueue[763]: return $result [ 226.344784] localhost dracut-initqueue[763]: } [ 226.344784] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 226.344784] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 226.344784] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 226.344784] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 226.344784] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 226.344784] localhost dracut-initqueue[763]: fi" [ 226.365495] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 226.365495] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 226.365495] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 227.102764] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 227.103632] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 227.103632] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 227.106136] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 227.106136] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 227.106136] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 227.106136] localhost dracut-initqueue[763]: log_debug() { [ 227.106136] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 227.106136] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 227.106136] localhost dracut-initqueue[763]: } [ 227.106136] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 227.106136] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 227.106136] localhost dracut-initqueue[763]: result=0 [ 227.106136] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 227.106136] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 227.106136] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 227.106136] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 227.106136] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 227.106136] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 227.106136] localhost dracut-initqueue[763]: continue [ 227.106136] localhost dracut-initqueue[763]: fi [ 227.106136] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 227.106136] localhost dracut-initqueue[763]: is_bindmount=$? [ 227.106136] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 227.106136] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 227.106136] localhost dracut-initqueue[763]: continue [ 227.106136] localhost dracut-initqueue[763]: fi [ 227.106136] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 227.106136] localhost dracut-initqueue[763]: is_nofail=$? [ 227.106136] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 227.106136] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 227.106136] localhost dracut-initqueue[763]: continue [ 227.106136] localhost dracut-initqueue[763]: fi [ 227.106136] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 227.106136] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 227.106136] localhost dracut-initqueue[763]: result=1 [ 227.106136] localhost dracut-initqueue[763]: fi [ 227.106136] localhost dracut-initqueue[763]: done [ 227.106136] localhost dracut-initqueue[763]: return $result [ 227.106136] localhost dracut-initqueue[763]: } [ 227.106136] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 227.106136] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 227.106136] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 227.128289] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 227.128289] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 227.128289] localhost dracut-initqueue[763]: fi" [ 227.131350] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 227.131350] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 227.131350] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 227.814785] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 227.816480] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 227.816480] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 227.819382] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 227.819382] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 227.819382] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 227.819382] localhost dracut-initqueue[763]: log_debug() { [ 227.819382] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 227.819382] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 227.819382] localhost dracut-initqueue[763]: } [ 227.819382] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 227.819382] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 227.819382] localhost dracut-initqueue[763]: result=0 [ 227.819382] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 227.819382] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 227.819382] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 227.819382] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 227.819382] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 227.819382] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 227.819382] localhost dracut-initqueue[763]: continue [ 227.819382] localhost dracut-initqueue[763]: fi [ 227.819382] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 227.819382] localhost dracut-initqueue[763]: is_bindmount=$? [ 227.819382] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 227.819382] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 227.819382] localhost dracut-initqueue[763]: continue [ 227.819382] localhost dracut-initqueue[763]: fi [ 227.819382] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 227.819382] localhost dracut-initqueue[763]: is_nofail=$? [ 227.819382] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 227.819382] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 227.819382] localhost dracut-initqueue[763]: continue [ 227.819382] localhost dracut-initqueue[763]: fi [ 227.819382] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 227.819382] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 227.819382] localhost dracut-initqueue[763]: result=1 [ 227.819382] localhost dracut-initqueue[763]: fi [ 227.819382] localhost dracut-initqueue[763]: done [ 227.819382] localhost dracut-initqueue[763]: return $result [ 227.819382] localhost dracut-initqueue[763]: } [ 227.819382] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 227.819382] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 227.819382] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 227.841875] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 227.841875] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 227.841875] localhost dracut-initqueue[763]: fi" [ 227.841875] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 227.841875] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 227.841875] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 228.593801] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 228.594620] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 228.594620] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 228.596154] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 228.596154] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 228.596154] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 228.596154] localhost dracut-initqueue[763]: log_debug() { [ 228.596154] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 228.596154] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 228.596154] localhost dracut-initqueue[763]: } [ 228.596154] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 228.596154] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 228.596154] localhost dracut-initqueue[763]: result=0 [ 228.596154] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 228.596154] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 228.596154] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 228.596154] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 228.596154] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 228.596154] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 228.596154] localhost dracut-initqueue[763]: continue [ 228.596154] localhost dracut-initqueue[763]: fi [ 228.596154] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 228.596154] localhost dracut-initqueue[763]: is_bindmount=$? [ 228.596154] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 228.596154] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 228.596154] localhost dracut-initqueue[763]: continue [ 228.596154] localhost dracut-initqueue[763]: fi [ 228.596154] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 228.596154] localhost dracut-initqueue[763]: is_nofail=$? [ 228.596154] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 228.596154] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 228.596154] localhost dracut-initqueue[763]: continue [ 228.596154] localhost dracut-initqueue[763]: fi [ 228.596154] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 228.596154] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 228.596154] localhost dracut-initqueue[763]: result=1 [ 228.596154] localhost dracut-initqueue[763]: fi [ 228.596154] localhost dracut-initqueue[763]: done [ 228.596154] localhost dracut-initqueue[763]: return $result [ 228.596154] localhost dracut-initqueue[763]: } [ 228.596154] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 228.596154] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 228.596154] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 228.613281] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 228.613281] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 228.613281] localhost dracut-initqueue[763]: fi" [ 228.613281] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 228.613281] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 228.613281] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 229.343800] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 229.345179] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 229.345179] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 229.345179] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 229.345179] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 229.345179] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 229.345179] localhost dracut-initqueue[763]: log_debug() { [ 229.345179] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 229.345179] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 229.345179] localhost dracut-initqueue[763]: } [ 229.345179] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 229.345179] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 229.345179] localhost dracut-initqueue[763]: result=0 [ 229.345179] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 229.345179] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 229.345179] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 229.345179] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 229.345179] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 229.345179] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 229.345179] localhost dracut-initqueue[763]: continue [ 229.345179] localhost dracut-initqueue[763]: fi [ 229.345179] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 229.345179] localhost dracut-initqueue[763]: is_bindmount=$? [ 229.345179] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 229.345179] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 229.345179] localhost dracut-initqueue[763]: continue [ 229.345179] localhost dracut-initqueue[763]: fi [ 229.345179] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 229.345179] localhost dracut-initqueue[763]: is_nofail=$? [ 229.345179] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 229.345179] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 229.345179] localhost dracut-initqueue[763]: continue [ 229.345179] localhost dracut-initqueue[763]: fi [ 229.345179] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 229.345179] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 229.345179] localhost dracut-initqueue[763]: result=1 [ 229.345179] localhost dracut-initqueue[763]: fi [ 229.345179] localhost dracut-initqueue[763]: done [ 229.345179] localhost dracut-initqueue[763]: return $result [ 229.345179] localhost dracut-initqueue[763]: } [ 229.345179] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 229.345179] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 229.345179] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 229.365649] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 229.365649] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 229.365649] localhost dracut-initqueue[763]: fi" [ 229.365649] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 229.365649] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 229.365649] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 230.119586] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 230.121164] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 230.121164] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 230.123694] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 230.123694] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 230.123694] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 230.123694] localhost dracut-initqueue[763]: log_debug() { [ 230.123694] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 230.123694] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 230.123694] localhost dracut-initqueue[763]: } [ 230.123694] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 230.123694] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 230.123694] localhost dracut-initqueue[763]: result=0 [ 230.123694] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 230.123694] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 230.123694] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 230.123694] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 230.123694] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 230.123694] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 230.123694] localhost dracut-initqueue[763]: continue [ 230.123694] localhost dracut-initqueue[763]: fi [ 230.123694] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 230.123694] localhost dracut-initqueue[763]: is_bindmount=$? [ 230.123694] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 230.123694] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 230.123694] localhost dracut-initqueue[763]: continue [ 230.123694] localhost dracut-initqueue[763]: fi [ 230.123694] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 230.123694] localhost dracut-initqueue[763]: is_nofail=$? [ 230.123694] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 230.123694] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 230.123694] localhost dracut-initqueue[763]: continue [ 230.123694] localhost dracut-initqueue[763]: fi [ 230.123694] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 230.123694] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 230.123694] localhost dracut-initqueue[763]: result=1 [ 230.123694] localhost dracut-initqueue[763]: fi [ 230.123694] localhost dracut-initqueue[763]: done [ 230.123694] localhost dracut-initqueue[763]: return $result [ 230.123694] localhost dracut-initqueue[763]: } [ 230.123694] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 230.123694] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 230.123694] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 230.141767] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 230.141767] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 230.141767] localhost dracut-initqueue[763]: fi" [ 230.141767] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 230.141767] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 230.141767] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 230.854713] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 230.854713] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 230.854713] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 230.861215] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 230.861215] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 230.861215] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 230.861215] localhost dracut-initqueue[763]: log_debug() { [ 230.861215] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 230.861215] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 230.861215] localhost dracut-initqueue[763]: } [ 230.861215] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 230.861215] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 230.861215] localhost dracut-initqueue[763]: result=0 [ 230.861215] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 230.861215] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 230.861215] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 230.861215] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 230.861215] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 230.861215] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 230.861215] localhost dracut-initqueue[763]: continue [ 230.861215] localhost dracut-initqueue[763]: fi [ 230.861215] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 230.861215] localhost dracut-initqueue[763]: is_bindmount=$? [ 230.861215] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 230.861215] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 230.861215] localhost dracut-initqueue[763]: continue [ 230.861215] localhost dracut-initqueue[763]: fi [ 230.861215] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 230.861215] localhost dracut-initqueue[763]: is_nofail=$? [ 230.861215] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 230.861215] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 230.861215] localhost dracut-initqueue[763]: continue [ 230.861215] localhost dracut-initqueue[763]: fi [ 230.861215] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 230.861215] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 230.861215] localhost dracut-initqueue[763]: result=1 [ 230.861215] localhost dracut-initqueue[763]: fi [ 230.861215] localhost dracut-initqueue[763]: done [ 230.861215] localhost dracut-initqueue[763]: return $result [ 230.861215] localhost dracut-initqueue[763]: } [ 230.861215] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 230.861215] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 230.861215] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 230.861215] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 230.861215] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 230.861215] localhost dracut-initqueue[763]: fi" [ 230.880814] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 230.882231] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 230.883842] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 231.621007] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 231.621882] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 231.621882] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 231.623666] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 231.623666] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 231.623666] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 231.623666] localhost dracut-initqueue[763]: log_debug() { [ 231.623666] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 231.623666] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 231.623666] localhost dracut-initqueue[763]: } [ 231.623666] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 231.623666] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 231.623666] localhost dracut-initqueue[763]: result=0 [ 231.623666] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 231.623666] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 231.623666] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 231.623666] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 231.623666] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 231.623666] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 231.623666] localhost dracut-initqueue[763]: continue [ 231.623666] localhost dracut-initqueue[763]: fi [ 231.623666] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 231.623666] localhost dracut-initqueue[763]: is_bindmount=$? [ 231.623666] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 231.623666] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 231.623666] localhost dracut-initqueue[763]: continue [ 231.623666] localhost dracut-initqueue[763]: fi [ 231.623666] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 231.623666] localhost dracut-initqueue[763]: is_nofail=$? [ 231.623666] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 231.623666] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 231.623666] localhost dracut-initqueue[763]: continue [ 231.623666] localhost dracut-initqueue[763]: fi [ 231.623666] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 231.623666] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 231.623666] localhost dracut-initqueue[763]: result=1 [ 231.623666] localhost dracut-initqueue[763]: fi [ 231.623666] localhost dracut-initqueue[763]: done [ 231.623666] localhost dracut-initqueue[763]: return $result [ 231.623666] localhost dracut-initqueue[763]: } [ 231.623666] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 231.623666] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 231.623666] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 231.641025] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 231.641025] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 231.641025] localhost dracut-initqueue[763]: fi" [ 231.641025] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 231.641025] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 231.641025] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 232.306915] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 232.308120] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 232.308120] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 232.310707] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 232.310707] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 232.310707] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 232.310707] localhost dracut-initqueue[763]: log_debug() { [ 232.310707] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 232.310707] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 232.310707] localhost dracut-initqueue[763]: } [ 232.310707] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 232.310707] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 232.310707] localhost dracut-initqueue[763]: result=0 [ 232.310707] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 232.310707] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 232.310707] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 232.310707] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 232.310707] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 232.310707] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 232.310707] localhost dracut-initqueue[763]: continue [ 232.310707] localhost dracut-initqueue[763]: fi [ 232.310707] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 232.310707] localhost dracut-initqueue[763]: is_bindmount=$? [ 232.310707] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 232.310707] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 232.310707] localhost dracut-initqueue[763]: continue [ 232.310707] localhost dracut-initqueue[763]: fi [ 232.310707] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 232.310707] localhost dracut-initqueue[763]: is_nofail=$? [ 232.310707] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 232.310707] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 232.310707] localhost dracut-initqueue[763]: continue [ 232.310707] localhost dracut-initqueue[763]: fi [ 232.310707] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 232.310707] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 232.310707] localhost dracut-initqueue[763]: result=1 [ 232.310707] localhost dracut-initqueue[763]: fi [ 232.310707] localhost dracut-initqueue[763]: done [ 232.310707] localhost dracut-initqueue[763]: return $result [ 232.310707] localhost dracut-initqueue[763]: } [ 232.310707] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 232.310707] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 232.310707] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 232.338890] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 232.338890] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 232.338890] localhost dracut-initqueue[763]: fi" [ 232.338890] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 232.345094] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 232.345094] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 233.080794] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 233.082424] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 233.082424] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 233.085481] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 233.085481] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 233.085481] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 233.085481] localhost dracut-initqueue[763]: log_debug() { [ 233.085481] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 233.085481] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 233.085481] localhost dracut-initqueue[763]: } [ 233.085481] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 233.085481] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 233.085481] localhost dracut-initqueue[763]: result=0 [ 233.085481] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 233.085481] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 233.085481] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 233.085481] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 233.085481] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 233.085481] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 233.085481] localhost dracut-initqueue[763]: continue [ 233.085481] localhost dracut-initqueue[763]: fi [ 233.085481] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 233.085481] localhost dracut-initqueue[763]: is_bindmount=$? [ 233.085481] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 233.085481] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 233.085481] localhost dracut-initqueue[763]: continue [ 233.085481] localhost dracut-initqueue[763]: fi [ 233.085481] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 233.085481] localhost dracut-initqueue[763]: is_nofail=$? [ 233.085481] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 233.085481] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 233.085481] localhost dracut-initqueue[763]: continue [ 233.085481] localhost dracut-initqueue[763]: fi [ 233.085481] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 233.085481] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 233.085481] localhost dracut-initqueue[763]: result=1 [ 233.085481] localhost dracut-initqueue[763]: fi [ 233.085481] localhost dracut-initqueue[763]: done [ 233.085481] localhost dracut-initqueue[763]: return $result [ 233.085481] localhost dracut-initqueue[763]: } [ 233.085481] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 233.085481] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 233.085481] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 233.112090] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 233.112090] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 233.112090] localhost dracut-initqueue[763]: fi" [ 233.112090] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 233.112090] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 233.112090] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 233.850424] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 233.852043] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 233.852043] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 233.852043] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 233.852043] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 233.852043] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 233.852043] localhost dracut-initqueue[763]: log_debug() { [ 233.852043] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 233.852043] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 233.852043] localhost dracut-initqueue[763]: } [ 233.852043] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 233.852043] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 233.852043] localhost dracut-initqueue[763]: result=0 [ 233.852043] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 233.852043] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 233.852043] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 233.852043] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 233.852043] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 233.852043] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 233.852043] localhost dracut-initqueue[763]: continue [ 233.852043] localhost dracut-initqueue[763]: fi [ 233.852043] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 233.852043] localhost dracut-initqueue[763]: is_bindmount=$? [ 233.852043] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 233.852043] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 233.852043] localhost dracut-initqueue[763]: continue [ 233.852043] localhost dracut-initqueue[763]: fi [ 233.852043] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 233.852043] localhost dracut-initqueue[763]: is_nofail=$? [ 233.852043] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 233.852043] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 233.852043] localhost dracut-initqueue[763]: continue [ 233.852043] localhost dracut-initqueue[763]: fi [ 233.852043] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 233.852043] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 233.852043] localhost dracut-initqueue[763]: result=1 [ 233.852043] localhost dracut-initqueue[763]: fi [ 233.852043] localhost dracut-initqueue[763]: done [ 233.852043] localhost dracut-initqueue[763]: return $result [ 233.852043] localhost dracut-initqueue[763]: } [ 233.852043] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 233.852043] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 233.852043] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 233.884177] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 233.884177] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 233.884177] localhost dracut-initqueue[763]: fi" [ 233.884177] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 233.884177] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 233.884177] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 234.617332] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 234.618939] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 234.618939] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 234.622044] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 234.622044] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 234.622044] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 234.622044] localhost dracut-initqueue[763]: log_debug() { [ 234.622044] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 234.622044] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 234.622044] localhost dracut-initqueue[763]: } [ 234.622044] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 234.622044] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 234.622044] localhost dracut-initqueue[763]: result=0 [ 234.622044] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 234.622044] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 234.622044] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 234.622044] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 234.622044] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 234.622044] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 234.622044] localhost dracut-initqueue[763]: continue [ 234.622044] localhost dracut-initqueue[763]: fi [ 234.622044] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 234.622044] localhost dracut-initqueue[763]: is_bindmount=$? [ 234.622044] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 234.622044] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 234.622044] localhost dracut-initqueue[763]: continue [ 234.622044] localhost dracut-initqueue[763]: fi [ 234.622044] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 234.622044] localhost dracut-initqueue[763]: is_nofail=$? [ 234.622044] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 234.622044] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 234.622044] localhost dracut-initqueue[763]: continue [ 234.622044] localhost dracut-initqueue[763]: fi [ 234.622044] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 234.622044] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 234.622044] localhost dracut-initqueue[763]: result=1 [ 234.622044] localhost dracut-initqueue[763]: fi [ 234.622044] localhost dracut-initqueue[763]: done [ 234.622044] localhost dracut-initqueue[763]: return $result [ 234.622044] localhost dracut-initqueue[763]: } [ 234.622044] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 234.622044] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 234.622044] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 234.648345] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 234.648345] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 234.648345] localhost dracut-initqueue[763]: fi" [ 234.648345] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 234.648345] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 234.648345] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 235.381886] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 235.383878] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 235.383878] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 235.387171] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 235.387171] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 235.387171] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 235.387171] localhost dracut-initqueue[763]: log_debug() { [ 235.387171] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 235.387171] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 235.387171] localhost dracut-initqueue[763]: } [ 235.387171] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 235.387171] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 235.387171] localhost dracut-initqueue[763]: result=0 [ 235.387171] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 235.387171] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 235.387171] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 235.387171] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 235.387171] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 235.387171] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 235.387171] localhost dracut-initqueue[763]: continue [ 235.387171] localhost dracut-initqueue[763]: fi [ 235.387171] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 235.387171] localhost dracut-initqueue[763]: is_bindmount=$? [ 235.387171] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 235.387171] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 235.387171] localhost dracut-initqueue[763]: continue [ 235.387171] localhost dracut-initqueue[763]: fi [ 235.387171] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 235.387171] localhost dracut-initqueue[763]: is_nofail=$? [ 235.387171] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 235.387171] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 235.387171] localhost dracut-initqueue[763]: continue [ 235.387171] localhost dracut-initqueue[763]: fi [ 235.387171] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 235.387171] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 235.387171] localhost dracut-initqueue[763]: result=1 [ 235.387171] localhost dracut-initqueue[763]: fi [ 235.387171] localhost dracut-initqueue[763]: done [ 235.387171] localhost dracut-initqueue[763]: return $result [ 235.387171] localhost dracut-initqueue[763]: } [ 235.387171] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 235.387171] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 235.387171] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 235.414879] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 235.414879] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 235.414879] localhost dracut-initqueue[763]: fi" [ 235.419048] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 235.420408] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 235.422643] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 236.151104] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 236.152343] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 236.152343] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 236.154709] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 236.154709] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 236.154709] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 236.154709] localhost dracut-initqueue[763]: log_debug() { [ 236.154709] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 236.154709] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 236.154709] localhost dracut-initqueue[763]: } [ 236.154709] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 236.154709] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 236.154709] localhost dracut-initqueue[763]: result=0 [ 236.154709] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 236.154709] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 236.154709] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 236.154709] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 236.154709] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 236.154709] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 236.154709] localhost dracut-initqueue[763]: continue [ 236.154709] localhost dracut-initqueue[763]: fi [ 236.154709] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 236.154709] localhost dracut-initqueue[763]: is_bindmount=$? [ 236.154709] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 236.154709] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 236.154709] localhost dracut-initqueue[763]: continue [ 236.154709] localhost dracut-initqueue[763]: fi [ 236.154709] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 236.154709] localhost dracut-initqueue[763]: is_nofail=$? [ 236.154709] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 236.154709] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 236.154709] localhost dracut-initqueue[763]: continue [ 236.154709] localhost dracut-initqueue[763]: fi [ 236.154709] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 236.154709] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 236.154709] localhost dracut-initqueue[763]: result=1 [ 236.154709] localhost dracut-initqueue[763]: fi [ 236.154709] localhost dracut-initqueue[763]: done [ 236.154709] localhost dracut-initqueue[763]: return $result [ 236.154709] localhost dracut-initqueue[763]: } [ 236.154709] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 236.154709] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 236.154709] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 236.154709] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 236.154709] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 236.154709] localhost dracut-initqueue[763]: fi" [ 236.184183] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 236.184183] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 236.184183] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 236.841533] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 236.843090] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 236.843090] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 236.845472] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 236.845472] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 236.845472] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 236.845472] localhost dracut-initqueue[763]: log_debug() { [ 236.845472] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 236.845472] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 236.845472] localhost dracut-initqueue[763]: } [ 236.845472] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 236.845472] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 236.845472] localhost dracut-initqueue[763]: result=0 [ 236.845472] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 236.845472] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 236.845472] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 236.845472] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 236.845472] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 236.845472] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 236.845472] localhost dracut-initqueue[763]: continue [ 236.845472] localhost dracut-initqueue[763]: fi [ 236.845472] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 236.845472] localhost dracut-initqueue[763]: is_bindmount=$? [ 236.845472] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 236.845472] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 236.845472] localhost dracut-initqueue[763]: continue [ 236.845472] localhost dracut-initqueue[763]: fi [ 236.845472] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 236.845472] localhost dracut-initqueue[763]: is_nofail=$? [ 236.845472] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 236.845472] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 236.845472] localhost dracut-initqueue[763]: continue [ 236.845472] localhost dracut-initqueue[763]: fi [ 236.845472] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 236.845472] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 236.845472] localhost dracut-initqueue[763]: result=1 [ 236.845472] localhost dracut-initqueue[763]: fi [ 236.845472] localhost dracut-initqueue[763]: done [ 236.845472] localhost dracut-initqueue[763]: return $result [ 236.845472] localhost dracut-initqueue[763]: } [ 236.845472] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 236.845472] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 236.845472] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 236.863662] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 236.863662] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 236.863662] localhost dracut-initqueue[763]: fi" [ 236.863662] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 236.863662] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 236.863662] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 237.582729] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 237.583422] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 237.583422] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 237.585568] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 237.585568] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 237.585568] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 237.585568] localhost dracut-initqueue[763]: log_debug() { [ 237.585568] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 237.585568] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 237.585568] localhost dracut-initqueue[763]: } [ 237.585568] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 237.585568] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 237.585568] localhost dracut-initqueue[763]: result=0 [ 237.585568] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 237.585568] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 237.585568] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 237.585568] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 237.585568] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 237.585568] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 237.585568] localhost dracut-initqueue[763]: continue [ 237.585568] localhost dracut-initqueue[763]: fi [ 237.585568] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 237.585568] localhost dracut-initqueue[763]: is_bindmount=$? [ 237.585568] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 237.585568] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 237.585568] localhost dracut-initqueue[763]: continue [ 237.585568] localhost dracut-initqueue[763]: fi [ 237.585568] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 237.585568] localhost dracut-initqueue[763]: is_nofail=$? [ 237.585568] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 237.585568] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 237.585568] localhost dracut-initqueue[763]: continue [ 237.585568] localhost dracut-initqueue[763]: fi [ 237.585568] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 237.585568] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 237.585568] localhost dracut-initqueue[763]: result=1 [ 237.585568] localhost dracut-initqueue[763]: fi [ 237.585568] localhost dracut-initqueue[763]: done [ 237.585568] localhost dracut-initqueue[763]: return $result [ 237.585568] localhost dracut-initqueue[763]: } [ 237.585568] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 237.585568] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 237.585568] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 237.603985] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 237.603985] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 237.603985] localhost dracut-initqueue[763]: fi" [ 237.603985] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 237.603985] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 237.603985] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 238.344670] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 238.346220] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 238.346220] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 238.348531] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 238.348531] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 238.348531] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 238.348531] localhost dracut-initqueue[763]: log_debug() { [ 238.348531] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 238.348531] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 238.348531] localhost dracut-initqueue[763]: } [ 238.348531] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 238.348531] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 238.348531] localhost dracut-initqueue[763]: result=0 [ 238.348531] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 238.348531] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 238.348531] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 238.348531] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 238.348531] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 238.348531] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 238.348531] localhost dracut-initqueue[763]: continue [ 238.348531] localhost dracut-initqueue[763]: fi [ 238.348531] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 238.348531] localhost dracut-initqueue[763]: is_bindmount=$? [ 238.348531] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 238.348531] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 238.348531] localhost dracut-initqueue[763]: continue [ 238.348531] localhost dracut-initqueue[763]: fi [ 238.348531] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 238.348531] localhost dracut-initqueue[763]: is_nofail=$? [ 238.348531] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 238.348531] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 238.348531] localhost dracut-initqueue[763]: continue [ 238.348531] localhost dracut-initqueue[763]: fi [ 238.348531] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 238.348531] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 238.348531] localhost dracut-initqueue[763]: result=1 [ 238.348531] localhost dracut-initqueue[763]: fi [ 238.348531] localhost dracut-initqueue[763]: done [ 238.348531] localhost dracut-initqueue[763]: return $result [ 238.348531] localhost dracut-initqueue[763]: } [ 238.348531] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 238.348531] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 238.348531] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 238.365748] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 238.365748] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 238.365748] localhost dracut-initqueue[763]: fi" [ 238.365748] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 238.365748] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 238.365748] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 239.100816] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 239.102289] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 239.102289] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 239.104792] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 239.104792] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 239.104792] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 239.104792] localhost dracut-initqueue[763]: log_debug() { [ 239.104792] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 239.104792] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 239.104792] localhost dracut-initqueue[763]: } [ 239.104792] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 239.104792] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 239.104792] localhost dracut-initqueue[763]: result=0 [ 239.104792] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 239.104792] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 239.104792] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 239.104792] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 239.104792] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 239.104792] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 239.104792] localhost dracut-initqueue[763]: continue [ 239.104792] localhost dracut-initqueue[763]: fi [ 239.104792] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 239.104792] localhost dracut-initqueue[763]: is_bindmount=$? [ 239.104792] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 239.104792] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 239.104792] localhost dracut-initqueue[763]: continue [ 239.104792] localhost dracut-initqueue[763]: fi [ 239.104792] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 239.104792] localhost dracut-initqueue[763]: is_nofail=$? [ 239.104792] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 239.104792] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 239.104792] localhost dracut-initqueue[763]: continue [ 239.104792] localhost dracut-initqueue[763]: fi [ 239.104792] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 239.104792] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 239.104792] localhost dracut-initqueue[763]: result=1 [ 239.104792] localhost dracut-initqueue[763]: fi [ 239.104792] localhost dracut-initqueue[763]: done [ 239.104792] localhost dracut-initqueue[763]: return $result [ 239.104792] localhost dracut-initqueue[763]: } [ 239.104792] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 239.104792] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 239.104792] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 239.122636] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 239.122636] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 239.122636] localhost dracut-initqueue[763]: fi" [ 239.122636] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 239.122636] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 239.122636] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 239.870897] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 239.872426] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 239.872426] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 239.874727] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 239.874727] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 239.874727] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 239.874727] localhost dracut-initqueue[763]: log_debug() { [ 239.874727] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 239.874727] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 239.874727] localhost dracut-initqueue[763]: } [ 239.874727] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 239.874727] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 239.874727] localhost dracut-initqueue[763]: result=0 [ 239.874727] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 239.874727] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 239.874727] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 239.874727] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 239.874727] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 239.874727] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 239.874727] localhost dracut-initqueue[763]: continue [ 239.874727] localhost dracut-initqueue[763]: fi [ 239.874727] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 239.874727] localhost dracut-initqueue[763]: is_bindmount=$? [ 239.874727] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 239.874727] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 239.874727] localhost dracut-initqueue[763]: continue [ 239.874727] localhost dracut-initqueue[763]: fi [ 239.874727] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 239.874727] localhost dracut-initqueue[763]: is_nofail=$? [ 239.874727] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 239.874727] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 239.874727] localhost dracut-initqueue[763]: continue [ 239.874727] localhost dracut-initqueue[763]: fi [ 239.874727] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 239.874727] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 239.874727] localhost dracut-initqueue[763]: result=1 [ 239.874727] localhost dracut-initqueue[763]: fi [ 239.874727] localhost dracut-initqueue[763]: done [ 239.874727] localhost dracut-initqueue[763]: return $result [ 239.874727] localhost dracut-initqueue[763]: } [ 239.874727] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 239.874727] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 239.874727] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 239.893298] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 239.893298] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 239.893298] localhost dracut-initqueue[763]: fi" [ 239.895548] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 239.895548] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 239.897059] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 240.610982] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 240.613670] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 240.613670] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 240.617498] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 240.617498] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 240.617498] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 240.617498] localhost dracut-initqueue[763]: log_debug() { [ 240.617498] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 240.617498] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 240.617498] localhost dracut-initqueue[763]: } [ 240.617498] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 240.617498] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 240.617498] localhost dracut-initqueue[763]: result=0 [ 240.617498] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 240.617498] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 240.617498] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 240.617498] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 240.617498] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 240.617498] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 240.617498] localhost dracut-initqueue[763]: continue [ 240.617498] localhost dracut-initqueue[763]: fi [ 240.617498] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 240.617498] localhost dracut-initqueue[763]: is_bindmount=$? [ 240.617498] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 240.617498] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 240.617498] localhost dracut-initqueue[763]: continue [ 240.617498] localhost dracut-initqueue[763]: fi [ 240.617498] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 240.617498] localhost dracut-initqueue[763]: is_nofail=$? [ 240.617498] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 240.617498] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 240.617498] localhost dracut-initqueue[763]: continue [ 240.617498] localhost dracut-initqueue[763]: fi [ 240.617498] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 240.617498] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 240.617498] localhost dracut-initqueue[763]: result=1 [ 240.617498] localhost dracut-initqueue[763]: fi [ 240.617498] localhost dracut-initqueue[763]: done [ 240.617498] localhost dracut-initqueue[763]: return $result [ 240.617498] localhost dracut-initqueue[763]: } [ 240.617498] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 240.617498] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 240.617498] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 240.642115] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 240.642115] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 240.642115] localhost dracut-initqueue[763]: fi" [ 240.642115] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 240.642115] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 240.642115] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 241.300932] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 241.302315] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 241.302315] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 241.305164] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 241.305164] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 241.305164] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 241.305164] localhost dracut-initqueue[763]: log_debug() { [ 241.305164] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 241.305164] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 241.305164] localhost dracut-initqueue[763]: } [ 241.305164] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 241.305164] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 241.305164] localhost dracut-initqueue[763]: result=0 [ 241.305164] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 241.305164] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 241.305164] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 241.305164] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 241.305164] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 241.305164] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 241.305164] localhost dracut-initqueue[763]: continue [ 241.305164] localhost dracut-initqueue[763]: fi [ 241.305164] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 241.305164] localhost dracut-initqueue[763]: is_bindmount=$? [ 241.305164] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 241.305164] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 241.305164] localhost dracut-initqueue[763]: continue [ 241.305164] localhost dracut-initqueue[763]: fi [ 241.305164] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 241.305164] localhost dracut-initqueue[763]: is_nofail=$? [ 241.305164] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 241.305164] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 241.305164] localhost dracut-initqueue[763]: continue [ 241.305164] localhost dracut-initqueue[763]: fi [ 241.305164] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 241.305164] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 241.305164] localhost dracut-initqueue[763]: result=1 [ 241.305164] localhost dracut-initqueue[763]: fi [ 241.305164] localhost dracut-initqueue[763]: done [ 241.305164] localhost dracut-initqueue[763]: return $result [ 241.305164] localhost dracut-initqueue[763]: } [ 241.305164] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 241.305164] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 241.305164] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 241.331407] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 241.331407] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 241.331407] localhost dracut-initqueue[763]: fi" [ 241.331407] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 241.331407] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 241.337199] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 242.080859] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 242.082354] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 242.082354] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 242.082354] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 242.082354] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 242.082354] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 242.082354] localhost dracut-initqueue[763]: log_debug() { [ 242.082354] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 242.082354] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 242.082354] localhost dracut-initqueue[763]: } [ 242.082354] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 242.082354] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 242.082354] localhost dracut-initqueue[763]: result=0 [ 242.082354] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 242.082354] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 242.082354] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 242.082354] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 242.082354] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 242.082354] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 242.082354] localhost dracut-initqueue[763]: continue [ 242.082354] localhost dracut-initqueue[763]: fi [ 242.082354] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 242.082354] localhost dracut-initqueue[763]: is_bindmount=$? [ 242.082354] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 242.082354] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 242.082354] localhost dracut-initqueue[763]: continue [ 242.082354] localhost dracut-initqueue[763]: fi [ 242.082354] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 242.082354] localhost dracut-initqueue[763]: is_nofail=$? [ 242.082354] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 242.082354] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 242.082354] localhost dracut-initqueue[763]: continue [ 242.082354] localhost dracut-initqueue[763]: fi [ 242.082354] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 242.082354] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 242.082354] localhost dracut-initqueue[763]: result=1 [ 242.082354] localhost dracut-initqueue[763]: fi [ 242.082354] localhost dracut-initqueue[763]: done [ 242.082354] localhost dracut-initqueue[763]: return $result [ 242.082354] localhost dracut-initqueue[763]: } [ 242.082354] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 242.082354] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 242.082354] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 242.111354] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 242.111354] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 242.111354] localhost dracut-initqueue[763]: fi" [ 242.111354] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 242.111354] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 242.111354] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 242.851505] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 242.853287] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 242.853287] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 242.856281] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 242.856281] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 242.856281] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 242.856281] localhost dracut-initqueue[763]: log_debug() { [ 242.856281] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 242.856281] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 242.856281] localhost dracut-initqueue[763]: } [ 242.856281] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 242.856281] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 242.856281] localhost dracut-initqueue[763]: result=0 [ 242.856281] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 242.856281] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 242.856281] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 242.856281] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 242.856281] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 242.856281] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 242.856281] localhost dracut-initqueue[763]: continue [ 242.856281] localhost dracut-initqueue[763]: fi [ 242.856281] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 242.856281] localhost dracut-initqueue[763]: is_bindmount=$? [ 242.856281] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 242.856281] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 242.856281] localhost dracut-initqueue[763]: continue [ 242.856281] localhost dracut-initqueue[763]: fi [ 242.856281] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 242.856281] localhost dracut-initqueue[763]: is_nofail=$? [ 242.856281] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 242.856281] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 242.856281] localhost dracut-initqueue[763]: continue [ 242.856281] localhost dracut-initqueue[763]: fi [ 242.856281] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 242.856281] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 242.856281] localhost dracut-initqueue[763]: result=1 [ 242.856281] localhost dracut-initqueue[763]: fi [ 242.856281] localhost dracut-initqueue[763]: done [ 242.856281] localhost dracut-initqueue[763]: return $result [ 242.856281] localhost dracut-initqueue[763]: } [ 242.856281] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 242.856281] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 242.856281] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 242.881247] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 242.881247] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 242.881247] localhost dracut-initqueue[763]: fi" [ 242.881247] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 242.881247] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 242.881247] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 243.594787] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 243.595652] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 243.595652] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 243.597981] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 243.597981] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 243.597981] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 243.597981] localhost dracut-initqueue[763]: log_debug() { [ 243.597981] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 243.597981] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 243.597981] localhost dracut-initqueue[763]: } [ 243.597981] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 243.597981] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 243.597981] localhost dracut-initqueue[763]: result=0 [ 243.597981] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 243.597981] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 243.597981] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 243.597981] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 243.597981] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 243.597981] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 243.597981] localhost dracut-initqueue[763]: continue [ 243.597981] localhost dracut-initqueue[763]: fi [ 243.597981] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 243.597981] localhost dracut-initqueue[763]: is_bindmount=$? [ 243.597981] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 243.597981] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 243.597981] localhost dracut-initqueue[763]: continue [ 243.597981] localhost dracut-initqueue[763]: fi [ 243.597981] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 243.597981] localhost dracut-initqueue[763]: is_nofail=$? [ 243.597981] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 243.597981] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 243.597981] localhost dracut-initqueue[763]: continue [ 243.597981] localhost dracut-initqueue[763]: fi [ 243.597981] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 243.597981] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 243.597981] localhost dracut-initqueue[763]: result=1 [ 243.597981] localhost dracut-initqueue[763]: fi [ 243.597981] localhost dracut-initqueue[763]: done [ 243.597981] localhost dracut-initqueue[763]: return $result [ 243.597981] localhost dracut-initqueue[763]: } [ 243.597981] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 243.597981] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 243.597981] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 243.615055] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 243.615055] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 243.615055] localhost dracut-initqueue[763]: fi" [ 243.615055] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 243.618507] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 243.623583] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 244.349761] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 244.351275] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 244.351275] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 244.353559] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 244.353559] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 244.353559] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 244.353559] localhost dracut-initqueue[763]: log_debug() { [ 244.353559] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 244.353559] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 244.353559] localhost dracut-initqueue[763]: } [ 244.353559] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 244.353559] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 244.353559] localhost dracut-initqueue[763]: result=0 [ 244.353559] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 244.353559] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 244.353559] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 244.353559] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 244.353559] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 244.353559] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 244.353559] localhost dracut-initqueue[763]: continue [ 244.353559] localhost dracut-initqueue[763]: fi [ 244.353559] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 244.353559] localhost dracut-initqueue[763]: is_bindmount=$? [ 244.353559] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 244.353559] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 244.353559] localhost dracut-initqueue[763]: continue [ 244.353559] localhost dracut-initqueue[763]: fi [ 244.353559] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 244.353559] localhost dracut-initqueue[763]: is_nofail=$? [ 244.353559] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 244.353559] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 244.353559] localhost dracut-initqueue[763]: continue [ 244.353559] localhost dracut-initqueue[763]: fi [ 244.353559] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 244.353559] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 244.353559] localhost dracut-initqueue[763]: result=1 [ 244.353559] localhost dracut-initqueue[763]: fi [ 244.353559] localhost dracut-initqueue[763]: done [ 244.353559] localhost dracut-initqueue[763]: return $result [ 244.353559] localhost dracut-initqueue[763]: } [ 244.353559] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 244.353559] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 244.353559] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 244.370943] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 244.370943] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 244.370943] localhost dracut-initqueue[763]: fi" [ 244.370943] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 244.370943] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 244.370943] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 245.080915] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 245.081734] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 245.081734] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 245.083286] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 245.083286] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 245.083286] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 245.083286] localhost dracut-initqueue[763]: log_debug() { [ 245.083286] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 245.083286] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 245.083286] localhost dracut-initqueue[763]: } [ 245.083286] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 245.083286] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 245.083286] localhost dracut-initqueue[763]: result=0 [ 245.083286] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 245.083286] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 245.083286] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 245.083286] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 245.083286] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 245.083286] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 245.083286] localhost dracut-initqueue[763]: continue [ 245.083286] localhost dracut-initqueue[763]: fi [ 245.083286] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 245.083286] localhost dracut-initqueue[763]: is_bindmount=$? [ 245.083286] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 245.083286] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 245.083286] localhost dracut-initqueue[763]: continue [ 245.083286] localhost dracut-initqueue[763]: fi [ 245.083286] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 245.083286] localhost dracut-initqueue[763]: is_nofail=$? [ 245.083286] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 245.083286] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 245.083286] localhost dracut-initqueue[763]: continue [ 245.083286] localhost dracut-initqueue[763]: fi [ 245.083286] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 245.083286] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 245.083286] localhost dracut-initqueue[763]: result=1 [ 245.083286] localhost dracut-initqueue[763]: fi [ 245.083286] localhost dracut-initqueue[763]: done [ 245.083286] localhost dracut-initqueue[763]: return $result [ 245.083286] localhost dracut-initqueue[763]: } [ 245.083286] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 245.083286] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 245.083286] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 245.083286] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 245.083286] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 245.083286] localhost dracut-initqueue[763]: fi" [ 245.103036] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 245.103036] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 245.103036] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 245.759365] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 245.760894] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 245.760894] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 245.763186] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 245.763186] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 245.763186] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 245.763186] localhost dracut-initqueue[763]: log_debug() { [ 245.763186] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 245.763186] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 245.763186] localhost dracut-initqueue[763]: } [ 245.763186] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 245.763186] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 245.763186] localhost dracut-initqueue[763]: result=0 [ 245.763186] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 245.763186] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 245.763186] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 245.763186] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 245.763186] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 245.763186] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 245.763186] localhost dracut-initqueue[763]: continue [ 245.763186] localhost dracut-initqueue[763]: fi [ 245.763186] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 245.763186] localhost dracut-initqueue[763]: is_bindmount=$? [ 245.763186] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 245.763186] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 245.763186] localhost dracut-initqueue[763]: continue [ 245.763186] localhost dracut-initqueue[763]: fi [ 245.763186] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 245.763186] localhost dracut-initqueue[763]: is_nofail=$? [ 245.763186] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 245.763186] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 245.763186] localhost dracut-initqueue[763]: continue [ 245.763186] localhost dracut-initqueue[763]: fi [ 245.763186] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 245.763186] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 245.763186] localhost dracut-initqueue[763]: result=1 [ 245.763186] localhost dracut-initqueue[763]: fi [ 245.763186] localhost dracut-initqueue[763]: done [ 245.763186] localhost dracut-initqueue[763]: return $result [ 245.763186] localhost dracut-initqueue[763]: } [ 245.763186] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 245.763186] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 245.763186] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 245.781727] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 245.781727] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 245.781727] localhost dracut-initqueue[763]: fi" [ 245.784630] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 245.785527] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 245.787242] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 246.489550] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 246.490921] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 246.490921] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 246.493299] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 246.493299] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 246.493299] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 246.493299] localhost dracut-initqueue[763]: log_debug() { [ 246.493299] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 246.493299] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 246.493299] localhost dracut-initqueue[763]: } [ 246.493299] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 246.493299] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 246.493299] localhost dracut-initqueue[763]: result=0 [ 246.493299] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 246.493299] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 246.493299] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 246.493299] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 246.493299] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 246.493299] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 246.493299] localhost dracut-initqueue[763]: continue [ 246.493299] localhost dracut-initqueue[763]: fi [ 246.493299] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 246.493299] localhost dracut-initqueue[763]: is_bindmount=$? [ 246.493299] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 246.493299] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 246.493299] localhost dracut-initqueue[763]: continue [ 246.493299] localhost dracut-initqueue[763]: fi [ 246.493299] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 246.493299] localhost dracut-initqueue[763]: is_nofail=$? [ 246.493299] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 246.493299] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 246.493299] localhost dracut-initqueue[763]: continue [ 246.493299] localhost dracut-initqueue[763]: fi [ 246.493299] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 246.493299] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 246.493299] localhost dracut-initqueue[763]: result=1 [ 246.493299] localhost dracut-initqueue[763]: fi [ 246.493299] localhost dracut-initqueue[763]: done [ 246.493299] localhost dracut-initqueue[763]: return $result [ 246.493299] localhost dracut-initqueue[763]: } [ 246.493299] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 246.493299] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 246.493299] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 246.511245] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 246.511245] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 246.511245] localhost dracut-initqueue[763]: fi" [ 246.511245] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 246.511245] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 246.511245] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 247.259861] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 247.261504] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 247.261504] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 247.263895] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 247.263895] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 247.263895] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 247.263895] localhost dracut-initqueue[763]: log_debug() { [ 247.263895] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 247.263895] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 247.263895] localhost dracut-initqueue[763]: } [ 247.263895] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 247.263895] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 247.263895] localhost dracut-initqueue[763]: result=0 [ 247.263895] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 247.263895] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 247.263895] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 247.263895] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 247.263895] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 247.263895] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 247.263895] localhost dracut-initqueue[763]: continue [ 247.263895] localhost dracut-initqueue[763]: fi [ 247.263895] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 247.263895] localhost dracut-initqueue[763]: is_bindmount=$? [ 247.263895] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 247.263895] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 247.263895] localhost dracut-initqueue[763]: continue [ 247.263895] localhost dracut-initqueue[763]: fi [ 247.263895] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 247.263895] localhost dracut-initqueue[763]: is_nofail=$? [ 247.263895] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 247.263895] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 247.263895] localhost dracut-initqueue[763]: continue [ 247.263895] localhost dracut-initqueue[763]: fi [ 247.263895] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 247.263895] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 247.263895] localhost dracut-initqueue[763]: result=1 [ 247.263895] localhost dracut-initqueue[763]: fi [ 247.263895] localhost dracut-initqueue[763]: done [ 247.263895] localhost dracut-initqueue[763]: return $result [ 247.263895] localhost dracut-initqueue[763]: } [ 247.263895] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 247.263895] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 247.263895] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 247.281664] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 247.281664] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 247.281664] localhost dracut-initqueue[763]: fi" [ 247.281664] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 247.281664] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 247.281664] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 247.995967] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 247.997268] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 247.997268] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 247.999458] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 247.999458] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 247.999458] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 247.999458] localhost dracut-initqueue[763]: log_debug() { [ 247.999458] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 247.999458] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 247.999458] localhost dracut-initqueue[763]: } [ 247.999458] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 247.999458] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 247.999458] localhost dracut-initqueue[763]: result=0 [ 247.999458] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 247.999458] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 247.999458] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 247.999458] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 247.999458] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 247.999458] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 247.999458] localhost dracut-initqueue[763]: continue [ 247.999458] localhost dracut-initqueue[763]: fi [ 247.999458] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 247.999458] localhost dracut-initqueue[763]: is_bindmount=$? [ 247.999458] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 247.999458] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 247.999458] localhost dracut-initqueue[763]: continue [ 247.999458] localhost dracut-initqueue[763]: fi [ 247.999458] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 247.999458] localhost dracut-initqueue[763]: is_nofail=$? [ 247.999458] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 247.999458] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 247.999458] localhost dracut-initqueue[763]: continue [ 247.999458] localhost dracut-initqueue[763]: fi [ 247.999458] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 247.999458] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 247.999458] localhost dracut-initqueue[763]: result=1 [ 247.999458] localhost dracut-initqueue[763]: fi [ 247.999458] localhost dracut-initqueue[763]: done [ 247.999458] localhost dracut-initqueue[763]: return $result [ 247.999458] localhost dracut-initqueue[763]: } [ 247.999458] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 247.999458] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 247.999458] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 248.016819] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 248.016819] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 248.016819] localhost dracut-initqueue[763]: fi" [ 248.018994] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 248.020556] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 248.022713] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 248.735501] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 248.736518] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 248.736518] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 248.738655] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 248.738655] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 248.738655] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 248.738655] localhost dracut-initqueue[763]: log_debug() { [ 248.738655] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 248.738655] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 248.738655] localhost dracut-initqueue[763]: } [ 248.738655] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 248.738655] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 248.738655] localhost dracut-initqueue[763]: result=0 [ 248.738655] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 248.738655] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 248.738655] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 248.738655] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 248.738655] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 248.738655] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 248.738655] localhost dracut-initqueue[763]: continue [ 248.738655] localhost dracut-initqueue[763]: fi [ 248.738655] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 248.738655] localhost dracut-initqueue[763]: is_bindmount=$? [ 248.738655] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 248.738655] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 248.738655] localhost dracut-initqueue[763]: continue [ 248.738655] localhost dracut-initqueue[763]: fi [ 248.738655] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 248.738655] localhost dracut-initqueue[763]: is_nofail=$? [ 248.738655] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 248.738655] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 248.738655] localhost dracut-initqueue[763]: continue [ 248.738655] localhost dracut-initqueue[763]: fi [ 248.738655] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 248.738655] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 248.738655] localhost dracut-initqueue[763]: result=1 [ 248.738655] localhost dracut-initqueue[763]: fi [ 248.738655] localhost dracut-initqueue[763]: done [ 248.738655] localhost dracut-initqueue[763]: return $result [ 248.738655] localhost dracut-initqueue[763]: } [ 248.738655] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 248.738655] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 248.738655] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 248.738655] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 248.738655] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 248.738655] localhost dracut-initqueue[763]: fi" [ 248.757862] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 248.757862] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 248.757862] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 249.478923] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 249.482941] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 249.482941] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 249.485158] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 249.485158] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 249.485158] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 249.485158] localhost dracut-initqueue[763]: log_debug() { [ 249.485158] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 249.485158] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 249.485158] localhost dracut-initqueue[763]: } [ 249.485158] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 249.485158] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 249.485158] localhost dracut-initqueue[763]: result=0 [ 249.485158] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 249.485158] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 249.485158] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 249.485158] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 249.485158] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 249.485158] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 249.485158] localhost dracut-initqueue[763]: continue [ 249.485158] localhost dracut-initqueue[763]: fi [ 249.485158] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 249.485158] localhost dracut-initqueue[763]: is_bindmount=$? [ 249.485158] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 249.485158] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 249.485158] localhost dracut-initqueue[763]: continue [ 249.485158] localhost dracut-initqueue[763]: fi [ 249.485158] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 249.485158] localhost dracut-initqueue[763]: is_nofail=$? [ 249.485158] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 249.485158] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 249.485158] localhost dracut-initqueue[763]: continue [ 249.485158] localhost dracut-initqueue[763]: fi [ 249.485158] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 249.485158] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 249.485158] localhost dracut-initqueue[763]: result=1 [ 249.485158] localhost dracut-initqueue[763]: fi [ 249.485158] localhost dracut-initqueue[763]: done [ 249.485158] localhost dracut-initqueue[763]: return $result [ 249.485158] localhost dracut-initqueue[763]: } [ 249.485158] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 249.485158] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 249.485158] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 249.502675] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 249.502675] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 249.502675] localhost dracut-initqueue[763]: fi" [ 249.504888] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 249.505652] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 249.506398] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 250.177916] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 250.177916] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 250.177916] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 250.177916] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 250.177916] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 250.177916] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 250.177916] localhost dracut-initqueue[763]: log_debug() { [ 250.177916] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 250.177916] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 250.177916] localhost dracut-initqueue[763]: } [ 250.177916] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 250.177916] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 250.177916] localhost dracut-initqueue[763]: result=0 [ 250.177916] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 250.177916] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 250.177916] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 250.177916] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 250.177916] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 250.177916] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 250.177916] localhost dracut-initqueue[763]: continue [ 250.177916] localhost dracut-initqueue[763]: fi [ 250.177916] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 250.177916] localhost dracut-initqueue[763]: is_bindmount=$? [ 250.177916] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 250.177916] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 250.177916] localhost dracut-initqueue[763]: continue [ 250.177916] localhost dracut-initqueue[763]: fi [ 250.177916] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 250.177916] localhost dracut-initqueue[763]: is_nofail=$? [ 250.177916] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 250.177916] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 250.177916] localhost dracut-initqueue[763]: continue [ 250.177916] localhost dracut-initqueue[763]: fi [ 250.177916] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 250.177916] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 250.177916] localhost dracut-initqueue[763]: result=1 [ 250.177916] localhost dracut-initqueue[763]: fi [ 250.177916] localhost dracut-initqueue[763]: done [ 250.177916] localhost dracut-initqueue[763]: return $result [ 250.177916] localhost dracut-initqueue[763]: } [ 250.177916] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 250.177916] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 250.199805] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 250.199805] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 250.199805] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 250.199805] localhost dracut-initqueue[763]: fi" [ 250.199805] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 250.199805] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 250.199805] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 250.930273] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 250.931770] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 250.931770] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 250.934169] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 250.934169] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 250.934169] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 250.934169] localhost dracut-initqueue[763]: log_debug() { [ 250.934169] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 250.934169] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 250.934169] localhost dracut-initqueue[763]: } [ 250.934169] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 250.934169] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 250.934169] localhost dracut-initqueue[763]: result=0 [ 250.934169] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 250.934169] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 250.934169] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 250.934169] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 250.934169] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 250.934169] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 250.934169] localhost dracut-initqueue[763]: continue [ 250.934169] localhost dracut-initqueue[763]: fi [ 250.934169] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 250.934169] localhost dracut-initqueue[763]: is_bindmount=$? [ 250.934169] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 250.934169] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 250.934169] localhost dracut-initqueue[763]: continue [ 250.934169] localhost dracut-initqueue[763]: fi [ 250.934169] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 250.934169] localhost dracut-initqueue[763]: is_nofail=$? [ 250.934169] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 250.934169] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 250.934169] localhost dracut-initqueue[763]: continue [ 250.934169] localhost dracut-initqueue[763]: fi [ 250.934169] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 250.934169] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 250.934169] localhost dracut-initqueue[763]: result=1 [ 250.934169] localhost dracut-initqueue[763]: fi [ 250.934169] localhost dracut-initqueue[763]: done [ 250.934169] localhost dracut-initqueue[763]: return $result [ 250.934169] localhost dracut-initqueue[763]: } [ 250.934169] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 250.934169] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 250.934169] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 250.952963] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 250.952963] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 250.952963] localhost dracut-initqueue[763]: fi" [ 250.952963] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 250.952963] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 250.952963] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 251.722413] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 251.724773] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 251.724773] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 251.727907] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 251.727907] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 251.727907] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 251.727907] localhost dracut-initqueue[763]: log_debug() { [ 251.727907] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 251.727907] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 251.727907] localhost dracut-initqueue[763]: } [ 251.727907] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 251.727907] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 251.727907] localhost dracut-initqueue[763]: result=0 [ 251.727907] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 251.727907] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 251.727907] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 251.727907] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 251.727907] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 251.727907] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 251.727907] localhost dracut-initqueue[763]: continue [ 251.727907] localhost dracut-initqueue[763]: fi [ 251.727907] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 251.727907] localhost dracut-initqueue[763]: is_bindmount=$? [ 251.727907] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 251.727907] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 251.727907] localhost dracut-initqueue[763]: continue [ 251.727907] localhost dracut-initqueue[763]: fi [ 251.727907] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 251.727907] localhost dracut-initqueue[763]: is_nofail=$? [ 251.727907] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 251.727907] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 251.727907] localhost dracut-initqueue[763]: continue [ 251.727907] localhost dracut-initqueue[763]: fi [ 251.727907] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 251.727907] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 251.727907] localhost dracut-initqueue[763]: result=1 [ 251.727907] localhost dracut-initqueue[763]: fi [ 251.727907] localhost dracut-initqueue[763]: done [ 251.727907] localhost dracut-initqueue[763]: return $result [ 251.727907] localhost dracut-initqueue[763]: } [ 251.727907] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 251.727907] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 251.727907] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 251.754739] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 251.754739] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 251.754739] localhost dracut-initqueue[763]: fi" [ 251.754739] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 251.754739] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 251.754739] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 252.496052] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 252.498031] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 252.498031] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 252.501345] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 252.501345] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 252.501345] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 252.501345] localhost dracut-initqueue[763]: log_debug() { [ 252.501345] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 252.501345] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 252.501345] localhost dracut-initqueue[763]: } [ 252.501345] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 252.501345] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 252.501345] localhost dracut-initqueue[763]: result=0 [ 252.501345] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 252.501345] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 252.501345] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 252.501345] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 252.501345] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 252.501345] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 252.501345] localhost dracut-initqueue[763]: continue [ 252.501345] localhost dracut-initqueue[763]: fi [ 252.501345] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 252.501345] localhost dracut-initqueue[763]: is_bindmount=$? [ 252.501345] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 252.501345] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 252.501345] localhost dracut-initqueue[763]: continue [ 252.501345] localhost dracut-initqueue[763]: fi [ 252.501345] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 252.501345] localhost dracut-initqueue[763]: is_nofail=$? [ 252.501345] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 252.501345] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 252.501345] localhost dracut-initqueue[763]: continue [ 252.501345] localhost dracut-initqueue[763]: fi [ 252.501345] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 252.501345] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 252.501345] localhost dracut-initqueue[763]: result=1 [ 252.501345] localhost dracut-initqueue[763]: fi [ 252.501345] localhost dracut-initqueue[763]: done [ 252.501345] localhost dracut-initqueue[763]: return $result [ 252.501345] localhost dracut-initqueue[763]: } [ 252.501345] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 252.501345] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 252.501345] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 252.528114] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 252.528114] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 252.528114] localhost dracut-initqueue[763]: fi" [ 252.532442] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 252.535059] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 252.537473] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 253.307346] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 253.308177] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 253.308177] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 253.309727] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 253.309727] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 253.309727] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 253.309727] localhost dracut-initqueue[763]: log_debug() { [ 253.309727] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 253.309727] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 253.309727] localhost dracut-initqueue[763]: } [ 253.309727] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 253.309727] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 253.309727] localhost dracut-initqueue[763]: result=0 [ 253.309727] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 253.309727] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 253.309727] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 253.309727] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 253.309727] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 253.309727] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 253.309727] localhost dracut-initqueue[763]: continue [ 253.309727] localhost dracut-initqueue[763]: fi [ 253.309727] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 253.309727] localhost dracut-initqueue[763]: is_bindmount=$? [ 253.309727] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 253.309727] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 253.309727] localhost dracut-initqueue[763]: continue [ 253.309727] localhost dracut-initqueue[763]: fi [ 253.309727] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 253.309727] localhost dracut-initqueue[763]: is_nofail=$? [ 253.309727] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 253.309727] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 253.309727] localhost dracut-initqueue[763]: continue [ 253.309727] localhost dracut-initqueue[763]: fi [ 253.309727] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 253.309727] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 253.309727] localhost dracut-initqueue[763]: result=1 [ 253.309727] localhost dracut-initqueue[763]: fi [ 253.309727] localhost dracut-initqueue[763]: done [ 253.309727] localhost dracut-initqueue[763]: return $result [ 253.309727] localhost dracut-initqueue[763]: } [ 253.309727] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 253.309727] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 253.309727] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 253.309727] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 253.309727] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 253.309727] localhost dracut-initqueue[763]: fi" [ 253.329225] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 253.329225] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 253.329225] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 254.035045] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 254.036175] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 254.036175] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 254.038245] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 254.038245] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 254.038245] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 254.038245] localhost dracut-initqueue[763]: log_debug() { [ 254.038245] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 254.038245] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 254.038245] localhost dracut-initqueue[763]: } [ 254.038245] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 254.038245] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 254.038245] localhost dracut-initqueue[763]: result=0 [ 254.038245] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 254.038245] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 254.038245] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 254.038245] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 254.038245] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 254.038245] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 254.038245] localhost dracut-initqueue[763]: continue [ 254.038245] localhost dracut-initqueue[763]: fi [ 254.038245] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 254.038245] localhost dracut-initqueue[763]: is_bindmount=$? [ 254.038245] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 254.038245] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 254.038245] localhost dracut-initqueue[763]: continue [ 254.038245] localhost dracut-initqueue[763]: fi [ 254.038245] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 254.038245] localhost dracut-initqueue[763]: is_nofail=$? [ 254.038245] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 254.038245] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 254.038245] localhost dracut-initqueue[763]: continue [ 254.038245] localhost dracut-initqueue[763]: fi [ 254.038245] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 254.038245] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 254.038245] localhost dracut-initqueue[763]: result=1 [ 254.038245] localhost dracut-initqueue[763]: fi [ 254.038245] localhost dracut-initqueue[763]: done [ 254.038245] localhost dracut-initqueue[763]: return $result [ 254.038245] localhost dracut-initqueue[763]: } [ 254.038245] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 254.038245] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 254.038245] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 254.038245] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 254.038245] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 254.038245] localhost dracut-initqueue[763]: fi" [ 254.059126] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 254.059126] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 254.059126] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 254.719555] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 254.721026] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 254.721026] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 254.723418] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 254.723418] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 254.723418] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 254.723418] localhost dracut-initqueue[763]: log_debug() { [ 254.723418] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 254.723418] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 254.723418] localhost dracut-initqueue[763]: } [ 254.723418] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 254.723418] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 254.723418] localhost dracut-initqueue[763]: result=0 [ 254.723418] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 254.723418] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 254.723418] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 254.723418] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 254.723418] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 254.723418] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 254.723418] localhost dracut-initqueue[763]: continue [ 254.723418] localhost dracut-initqueue[763]: fi [ 254.723418] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 254.723418] localhost dracut-initqueue[763]: is_bindmount=$? [ 254.723418] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 254.723418] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 254.723418] localhost dracut-initqueue[763]: continue [ 254.723418] localhost dracut-initqueue[763]: fi [ 254.723418] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 254.723418] localhost dracut-initqueue[763]: is_nofail=$? [ 254.723418] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 254.723418] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 254.723418] localhost dracut-initqueue[763]: continue [ 254.723418] localhost dracut-initqueue[763]: fi [ 254.723418] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 254.723418] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 254.723418] localhost dracut-initqueue[763]: result=1 [ 254.723418] localhost dracut-initqueue[763]: fi [ 254.723418] localhost dracut-initqueue[763]: done [ 254.723418] localhost dracut-initqueue[763]: return $result [ 254.723418] localhost dracut-initqueue[763]: } [ 254.723418] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 254.723418] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 254.723418] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 254.741627] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 254.741627] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 254.741627] localhost dracut-initqueue[763]: fi" [ 254.745057] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 254.745970] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 254.747796] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 255.473915] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 255.474628] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 255.474628] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 255.476215] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 255.476215] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 255.476215] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 255.476215] localhost dracut-initqueue[763]: log_debug() { [ 255.476215] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 255.476215] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 255.476215] localhost dracut-initqueue[763]: } [ 255.476215] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 255.476215] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 255.476215] localhost dracut-initqueue[763]: result=0 [ 255.476215] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 255.476215] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 255.476215] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 255.476215] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 255.476215] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 255.476215] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 255.476215] localhost dracut-initqueue[763]: continue [ 255.476215] localhost dracut-initqueue[763]: fi [ 255.476215] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 255.476215] localhost dracut-initqueue[763]: is_bindmount=$? [ 255.476215] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 255.476215] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 255.476215] localhost dracut-initqueue[763]: continue [ 255.476215] localhost dracut-initqueue[763]: fi [ 255.476215] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 255.476215] localhost dracut-initqueue[763]: is_nofail=$? [ 255.476215] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 255.476215] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 255.476215] localhost dracut-initqueue[763]: continue [ 255.476215] localhost dracut-initqueue[763]: fi [ 255.476215] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 255.476215] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 255.476215] localhost dracut-initqueue[763]: result=1 [ 255.476215] localhost dracut-initqueue[763]: fi [ 255.476215] localhost dracut-initqueue[763]: done [ 255.476215] localhost dracut-initqueue[763]: return $result [ 255.476215] localhost dracut-initqueue[763]: } [ 255.476215] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 255.476215] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 255.476215] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 255.476215] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 255.476215] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 255.476215] localhost dracut-initqueue[763]: fi" [ 255.497058] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 255.497979] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 255.498976] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 256.251737] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 256.252731] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 256.252731] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 256.254277] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 256.254277] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 256.254277] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 256.254277] localhost dracut-initqueue[763]: log_debug() { [ 256.254277] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 256.254277] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 256.254277] localhost dracut-initqueue[763]: } [ 256.254277] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 256.254277] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 256.254277] localhost dracut-initqueue[763]: result=0 [ 256.254277] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 256.254277] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 256.254277] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 256.254277] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 256.254277] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 256.254277] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 256.254277] localhost dracut-initqueue[763]: continue [ 256.254277] localhost dracut-initqueue[763]: fi [ 256.254277] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 256.254277] localhost dracut-initqueue[763]: is_bindmount=$? [ 256.254277] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 256.254277] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 256.254277] localhost dracut-initqueue[763]: continue [ 256.254277] localhost dracut-initqueue[763]: fi [ 256.254277] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 256.254277] localhost dracut-initqueue[763]: is_nofail=$? [ 256.254277] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 256.254277] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 256.254277] localhost dracut-initqueue[763]: continue [ 256.254277] localhost dracut-initqueue[763]: fi [ 256.254277] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 256.254277] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 256.254277] localhost dracut-initqueue[763]: result=1 [ 256.254277] localhost dracut-initqueue[763]: fi [ 256.254277] localhost dracut-initqueue[763]: done [ 256.254277] localhost dracut-initqueue[763]: return $result [ 256.254277] localhost dracut-initqueue[763]: } [ 256.254277] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 256.254277] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 256.254277] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 256.254277] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 256.254277] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 256.254277] localhost dracut-initqueue[763]: fi" [ 256.274290] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 256.274290] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 256.274290] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 257.003036] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 257.004537] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 257.004537] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 257.007324] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 257.007324] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 257.007324] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 257.007324] localhost dracut-initqueue[763]: log_debug() { [ 257.007324] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 257.007324] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 257.007324] localhost dracut-initqueue[763]: } [ 257.007324] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 257.007324] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 257.007324] localhost dracut-initqueue[763]: result=0 [ 257.007324] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 257.007324] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 257.007324] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 257.007324] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 257.007324] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 257.007324] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 257.007324] localhost dracut-initqueue[763]: continue [ 257.007324] localhost dracut-initqueue[763]: fi [ 257.007324] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 257.007324] localhost dracut-initqueue[763]: is_bindmount=$? [ 257.007324] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 257.007324] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 257.007324] localhost dracut-initqueue[763]: continue [ 257.007324] localhost dracut-initqueue[763]: fi [ 257.007324] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 257.007324] localhost dracut-initqueue[763]: is_nofail=$? [ 257.007324] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 257.007324] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 257.007324] localhost dracut-initqueue[763]: continue [ 257.007324] localhost dracut-initqueue[763]: fi [ 257.007324] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 257.007324] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 257.007324] localhost dracut-initqueue[763]: result=1 [ 257.007324] localhost dracut-initqueue[763]: fi [ 257.007324] localhost dracut-initqueue[763]: done [ 257.007324] localhost dracut-initqueue[763]: return $result [ 257.007324] localhost dracut-initqueue[763]: } [ 257.007324] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 257.007324] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 257.007324] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 257.025683] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 257.025683] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 257.025683] localhost dracut-initqueue[763]: fi" [ 257.027940] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 257.029482] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 257.031278] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 257.812789] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 257.814064] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 257.814064] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 257.816335] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 257.816335] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 257.816335] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 257.816335] localhost dracut-initqueue[763]: log_debug() { [ 257.816335] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 257.816335] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 257.816335] localhost dracut-initqueue[763]: } [ 257.816335] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 257.816335] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 257.816335] localhost dracut-initqueue[763]: result=0 [ 257.816335] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 257.816335] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 257.816335] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 257.816335] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 257.816335] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 257.816335] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 257.816335] localhost dracut-initqueue[763]: continue [ 257.816335] localhost dracut-initqueue[763]: fi [ 257.816335] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 257.816335] localhost dracut-initqueue[763]: is_bindmount=$? [ 257.816335] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 257.816335] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 257.816335] localhost dracut-initqueue[763]: continue [ 257.816335] localhost dracut-initqueue[763]: fi [ 257.816335] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 257.816335] localhost dracut-initqueue[763]: is_nofail=$? [ 257.816335] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 257.816335] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 257.816335] localhost dracut-initqueue[763]: continue [ 257.816335] localhost dracut-initqueue[763]: fi [ 257.816335] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 257.816335] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 257.816335] localhost dracut-initqueue[763]: result=1 [ 257.816335] localhost dracut-initqueue[763]: fi [ 257.816335] localhost dracut-initqueue[763]: done [ 257.816335] localhost dracut-initqueue[763]: return $result [ 257.816335] localhost dracut-initqueue[763]: } [ 257.816335] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 257.816335] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 257.816335] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 257.846854] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 257.846854] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 257.846854] localhost dracut-initqueue[763]: fi" [ 257.846854] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 257.846854] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 257.846854] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 258.591107] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 258.591841] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 258.591841] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 258.593619] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 258.593619] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 258.593619] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 258.593619] localhost dracut-initqueue[763]: log_debug() { [ 258.593619] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 258.593619] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 258.593619] localhost dracut-initqueue[763]: } [ 258.593619] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 258.593619] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 258.593619] localhost dracut-initqueue[763]: result=0 [ 258.593619] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 258.593619] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 258.593619] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 258.593619] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 258.593619] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 258.593619] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 258.593619] localhost dracut-initqueue[763]: continue [ 258.593619] localhost dracut-initqueue[763]: fi [ 258.593619] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 258.593619] localhost dracut-initqueue[763]: is_bindmount=$? [ 258.593619] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 258.593619] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 258.593619] localhost dracut-initqueue[763]: continue [ 258.593619] localhost dracut-initqueue[763]: fi [ 258.593619] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 258.593619] localhost dracut-initqueue[763]: is_nofail=$? [ 258.593619] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 258.593619] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 258.593619] localhost dracut-initqueue[763]: continue [ 258.593619] localhost dracut-initqueue[763]: fi [ 258.593619] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 258.593619] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 258.593619] localhost dracut-initqueue[763]: result=1 [ 258.593619] localhost dracut-initqueue[763]: fi [ 258.593619] localhost dracut-initqueue[763]: done [ 258.593619] localhost dracut-initqueue[763]: return $result [ 258.593619] localhost dracut-initqueue[763]: } [ 258.593619] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 258.593619] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 258.593619] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 258.593619] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 258.593619] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 258.593619] localhost dracut-initqueue[763]: fi" [ 258.612164] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 258.612164] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 258.612164] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 259.274801] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 259.275666] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 259.275666] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 259.277996] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 259.277996] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 259.277996] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 259.277996] localhost dracut-initqueue[763]: log_debug() { [ 259.277996] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 259.277996] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 259.277996] localhost dracut-initqueue[763]: } [ 259.277996] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 259.277996] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 259.277996] localhost dracut-initqueue[763]: result=0 [ 259.277996] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 259.277996] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 259.277996] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 259.277996] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 259.277996] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 259.277996] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 259.277996] localhost dracut-initqueue[763]: continue [ 259.277996] localhost dracut-initqueue[763]: fi [ 259.277996] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 259.277996] localhost dracut-initqueue[763]: is_bindmount=$? [ 259.277996] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 259.277996] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 259.277996] localhost dracut-initqueue[763]: continue [ 259.277996] localhost dracut-initqueue[763]: fi [ 259.277996] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 259.277996] localhost dracut-initqueue[763]: is_nofail=$? [ 259.277996] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 259.277996] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 259.277996] localhost dracut-initqueue[763]: continue [ 259.277996] localhost dracut-initqueue[763]: fi [ 259.277996] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 259.277996] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 259.277996] localhost dracut-initqueue[763]: result=1 [ 259.277996] localhost dracut-initqueue[763]: fi [ 259.277996] localhost dracut-initqueue[763]: done [ 259.277996] localhost dracut-initqueue[763]: return $result [ 259.277996] localhost dracut-initqueue[763]: } [ 259.277996] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 259.277996] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 259.277996] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 259.296213] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 259.296213] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 259.296213] localhost dracut-initqueue[763]: fi" [ 259.296213] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 259.300442] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 259.301594] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 260.040601] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 260.042032] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 260.042032] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 260.044155] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 260.044155] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 260.044155] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 260.044155] localhost dracut-initqueue[763]: log_debug() { [ 260.044155] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 260.044155] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 260.044155] localhost dracut-initqueue[763]: } [ 260.044155] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 260.044155] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 260.044155] localhost dracut-initqueue[763]: result=0 [ 260.044155] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 260.044155] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 260.044155] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 260.044155] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 260.044155] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 260.044155] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 260.044155] localhost dracut-initqueue[763]: continue [ 260.044155] localhost dracut-initqueue[763]: fi [ 260.044155] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 260.044155] localhost dracut-initqueue[763]: is_bindmount=$? [ 260.044155] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 260.044155] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 260.044155] localhost dracut-initqueue[763]: continue [ 260.044155] localhost dracut-initqueue[763]: fi [ 260.044155] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 260.044155] localhost dracut-initqueue[763]: is_nofail=$? [ 260.044155] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 260.044155] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 260.044155] localhost dracut-initqueue[763]: continue [ 260.044155] localhost dracut-initqueue[763]: fi [ 260.044155] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 260.044155] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 260.044155] localhost dracut-initqueue[763]: result=1 [ 260.044155] localhost dracut-initqueue[763]: fi [ 260.044155] localhost dracut-initqueue[763]: done [ 260.044155] localhost dracut-initqueue[763]: return $result [ 260.044155] localhost dracut-initqueue[763]: } [ 260.044155] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 260.044155] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 260.044155] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 260.061434] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 260.061434] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 260.061434] localhost dracut-initqueue[763]: fi" [ 260.064010] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 260.065378] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 260.066954] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 260.823387] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 260.824373] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 260.824373] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 260.826130] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 260.826130] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 260.826130] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 260.826130] localhost dracut-initqueue[763]: log_debug() { [ 260.826130] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 260.826130] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 260.826130] localhost dracut-initqueue[763]: } [ 260.826130] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 260.826130] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 260.826130] localhost dracut-initqueue[763]: result=0 [ 260.826130] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 260.826130] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 260.826130] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 260.826130] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 260.826130] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 260.826130] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 260.826130] localhost dracut-initqueue[763]: continue [ 260.826130] localhost dracut-initqueue[763]: fi [ 260.826130] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 260.826130] localhost dracut-initqueue[763]: is_bindmount=$? [ 260.826130] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 260.826130] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 260.826130] localhost dracut-initqueue[763]: continue [ 260.826130] localhost dracut-initqueue[763]: fi [ 260.826130] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 260.826130] localhost dracut-initqueue[763]: is_nofail=$? [ 260.826130] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 260.826130] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 260.826130] localhost dracut-initqueue[763]: continue [ 260.826130] localhost dracut-initqueue[763]: fi [ 260.826130] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 260.826130] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 260.826130] localhost dracut-initqueue[763]: result=1 [ 260.826130] localhost dracut-initqueue[763]: fi [ 260.826130] localhost dracut-initqueue[763]: done [ 260.826130] localhost dracut-initqueue[763]: return $result [ 260.826130] localhost dracut-initqueue[763]: } [ 260.826130] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 260.826130] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 260.826130] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 260.826130] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 260.826130] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 260.826130] localhost dracut-initqueue[763]: fi" [ 260.846627] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 260.846627] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 260.846627] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 261.589921] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 261.590710] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 261.590710] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 261.592633] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 261.592633] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 261.592633] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 261.592633] localhost dracut-initqueue[763]: log_debug() { [ 261.592633] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 261.592633] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 261.592633] localhost dracut-initqueue[763]: } [ 261.592633] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 261.592633] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 261.592633] localhost dracut-initqueue[763]: result=0 [ 261.592633] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 261.592633] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 261.592633] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 261.592633] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 261.592633] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 261.592633] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 261.592633] localhost dracut-initqueue[763]: continue [ 261.592633] localhost dracut-initqueue[763]: fi [ 261.592633] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 261.592633] localhost dracut-initqueue[763]: is_bindmount=$? [ 261.592633] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 261.592633] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 261.592633] localhost dracut-initqueue[763]: continue [ 261.592633] localhost dracut-initqueue[763]: fi [ 261.592633] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 261.592633] localhost dracut-initqueue[763]: is_nofail=$? [ 261.592633] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 261.592633] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 261.592633] localhost dracut-initqueue[763]: continue [ 261.592633] localhost dracut-initqueue[763]: fi [ 261.592633] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 261.592633] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 261.592633] localhost dracut-initqueue[763]: result=1 [ 261.592633] localhost dracut-initqueue[763]: fi [ 261.592633] localhost dracut-initqueue[763]: done [ 261.592633] localhost dracut-initqueue[763]: return $result [ 261.592633] localhost dracut-initqueue[763]: } [ 261.592633] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 261.592633] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 261.592633] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 261.592633] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 261.592633] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 261.592633] localhost dracut-initqueue[763]: fi" [ 261.614817] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 261.614817] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 261.614817] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 262.363680] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 262.365286] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 262.365286] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 262.367669] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 262.367669] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 262.367669] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 262.367669] localhost dracut-initqueue[763]: log_debug() { [ 262.367669] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 262.367669] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 262.367669] localhost dracut-initqueue[763]: } [ 262.367669] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 262.367669] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 262.367669] localhost dracut-initqueue[763]: result=0 [ 262.367669] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 262.367669] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 262.367669] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 262.367669] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 262.367669] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 262.367669] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 262.367669] localhost dracut-initqueue[763]: continue [ 262.367669] localhost dracut-initqueue[763]: fi [ 262.367669] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 262.367669] localhost dracut-initqueue[763]: is_bindmount=$? [ 262.367669] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 262.367669] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 262.367669] localhost dracut-initqueue[763]: continue [ 262.367669] localhost dracut-initqueue[763]: fi [ 262.367669] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 262.367669] localhost dracut-initqueue[763]: is_nofail=$? [ 262.367669] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 262.367669] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 262.367669] localhost dracut-initqueue[763]: continue [ 262.367669] localhost dracut-initqueue[763]: fi [ 262.367669] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 262.367669] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 262.367669] localhost dracut-initqueue[763]: result=1 [ 262.367669] localhost dracut-initqueue[763]: fi [ 262.367669] localhost dracut-initqueue[763]: done [ 262.367669] localhost dracut-initqueue[763]: return $result [ 262.367669] localhost dracut-initqueue[763]: } [ 262.367669] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 262.367669] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 262.367669] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 262.385315] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 262.385315] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 262.385315] localhost dracut-initqueue[763]: fi" [ 262.385315] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 262.385315] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 262.385315] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 263.101714] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 263.104684] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 263.104684] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 263.107892] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 263.107892] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 263.107892] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 263.107892] localhost dracut-initqueue[763]: log_debug() { [ 263.107892] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 263.107892] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 263.107892] localhost dracut-initqueue[763]: } [ 263.107892] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 263.107892] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 263.107892] localhost dracut-initqueue[763]: result=0 [ 263.107892] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 263.107892] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 263.107892] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 263.107892] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 263.107892] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 263.107892] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 263.107892] localhost dracut-initqueue[763]: continue [ 263.107892] localhost dracut-initqueue[763]: fi [ 263.107892] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 263.107892] localhost dracut-initqueue[763]: is_bindmount=$? [ 263.107892] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 263.107892] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 263.107892] localhost dracut-initqueue[763]: continue [ 263.107892] localhost dracut-initqueue[763]: fi [ 263.107892] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 263.107892] localhost dracut-initqueue[763]: is_nofail=$? [ 263.107892] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 263.107892] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 263.107892] localhost dracut-initqueue[763]: continue [ 263.107892] localhost dracut-initqueue[763]: fi [ 263.107892] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 263.107892] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 263.107892] localhost dracut-initqueue[763]: result=1 [ 263.107892] localhost dracut-initqueue[763]: fi [ 263.107892] localhost dracut-initqueue[763]: done [ 263.107892] localhost dracut-initqueue[763]: return $result [ 263.107892] localhost dracut-initqueue[763]: } [ 263.107892] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 263.107892] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 263.107892] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 263.124590] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 263.124590] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 263.124590] localhost dracut-initqueue[763]: fi" [ 263.124590] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 263.124590] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 263.124590] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 263.787402] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 263.788220] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 263.788220] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 263.789712] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 263.789712] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 263.789712] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 263.789712] localhost dracut-initqueue[763]: log_debug() { [ 263.789712] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 263.789712] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 263.789712] localhost dracut-initqueue[763]: } [ 263.789712] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 263.789712] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 263.789712] localhost dracut-initqueue[763]: result=0 [ 263.789712] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 263.789712] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 263.789712] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 263.789712] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 263.789712] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 263.789712] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 263.789712] localhost dracut-initqueue[763]: continue [ 263.789712] localhost dracut-initqueue[763]: fi [ 263.789712] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 263.789712] localhost dracut-initqueue[763]: is_bindmount=$? [ 263.789712] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 263.789712] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 263.789712] localhost dracut-initqueue[763]: continue [ 263.789712] localhost dracut-initqueue[763]: fi [ 263.789712] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 263.789712] localhost dracut-initqueue[763]: is_nofail=$? [ 263.789712] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 263.789712] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 263.789712] localhost dracut-initqueue[763]: continue [ 263.789712] localhost dracut-initqueue[763]: fi [ 263.789712] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 263.789712] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 263.789712] localhost dracut-initqueue[763]: result=1 [ 263.789712] localhost dracut-initqueue[763]: fi [ 263.789712] localhost dracut-initqueue[763]: done [ 263.789712] localhost dracut-initqueue[763]: return $result [ 263.789712] localhost dracut-initqueue[763]: } [ 263.789712] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 263.789712] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 263.789712] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 263.806380] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 263.806380] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 263.806380] localhost dracut-initqueue[763]: fi" [ 263.806380] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 263.806380] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 263.806380] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 264.528750] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 264.529600] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 264.529600] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 264.531214] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 264.531214] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 264.531214] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 264.531214] localhost dracut-initqueue[763]: log_debug() { [ 264.531214] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 264.531214] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 264.531214] localhost dracut-initqueue[763]: } [ 264.531214] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 264.531214] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 264.531214] localhost dracut-initqueue[763]: result=0 [ 264.531214] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 264.531214] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 264.531214] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 264.531214] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 264.531214] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 264.531214] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 264.531214] localhost dracut-initqueue[763]: continue [ 264.531214] localhost dracut-initqueue[763]: fi [ 264.531214] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 264.531214] localhost dracut-initqueue[763]: is_bindmount=$? [ 264.531214] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 264.531214] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 264.531214] localhost dracut-initqueue[763]: continue [ 264.531214] localhost dracut-initqueue[763]: fi [ 264.531214] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 264.531214] localhost dracut-initqueue[763]: is_nofail=$? [ 264.531214] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 264.531214] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 264.531214] localhost dracut-initqueue[763]: continue [ 264.531214] localhost dracut-initqueue[763]: fi [ 264.531214] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 264.531214] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 264.531214] localhost dracut-initqueue[763]: result=1 [ 264.531214] localhost dracut-initqueue[763]: fi [ 264.531214] localhost dracut-initqueue[763]: done [ 264.531214] localhost dracut-initqueue[763]: return $result [ 264.531214] localhost dracut-initqueue[763]: } [ 264.531214] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 264.531214] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 264.531214] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 264.549797] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 264.549797] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 264.549797] localhost dracut-initqueue[763]: fi" [ 264.549797] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 264.549797] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 264.549797] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 265.291725] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 265.293658] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 265.293658] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 265.293658] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 265.293658] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 265.293658] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 265.293658] localhost dracut-initqueue[763]: log_debug() { [ 265.293658] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 265.293658] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 265.293658] localhost dracut-initqueue[763]: } [ 265.293658] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 265.293658] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 265.293658] localhost dracut-initqueue[763]: result=0 [ 265.293658] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 265.293658] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 265.293658] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 265.293658] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 265.293658] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 265.293658] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 265.293658] localhost dracut-initqueue[763]: continue [ 265.293658] localhost dracut-initqueue[763]: fi [ 265.293658] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 265.293658] localhost dracut-initqueue[763]: is_bindmount=$? [ 265.293658] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 265.293658] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 265.293658] localhost dracut-initqueue[763]: continue [ 265.293658] localhost dracut-initqueue[763]: fi [ 265.293658] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 265.293658] localhost dracut-initqueue[763]: is_nofail=$? [ 265.293658] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 265.293658] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 265.293658] localhost dracut-initqueue[763]: continue [ 265.293658] localhost dracut-initqueue[763]: fi [ 265.293658] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 265.293658] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 265.293658] localhost dracut-initqueue[763]: result=1 [ 265.293658] localhost dracut-initqueue[763]: fi [ 265.293658] localhost dracut-initqueue[763]: done [ 265.293658] localhost dracut-initqueue[763]: return $result [ 265.293658] localhost dracut-initqueue[763]: } [ 265.293658] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 265.293658] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 265.293658] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 265.313248] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 265.313248] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 265.313248] localhost dracut-initqueue[763]: fi" [ 265.317260] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 265.317260] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 265.322593] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 266.033860] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 266.035330] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 266.035330] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 266.037568] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 266.037568] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 266.037568] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 266.037568] localhost dracut-initqueue[763]: log_debug() { [ 266.037568] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 266.037568] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 266.037568] localhost dracut-initqueue[763]: } [ 266.037568] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 266.037568] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 266.037568] localhost dracut-initqueue[763]: result=0 [ 266.037568] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 266.037568] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 266.037568] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 266.037568] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 266.037568] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 266.037568] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 266.037568] localhost dracut-initqueue[763]: continue [ 266.037568] localhost dracut-initqueue[763]: fi [ 266.037568] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 266.037568] localhost dracut-initqueue[763]: is_bindmount=$? [ 266.037568] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 266.037568] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 266.037568] localhost dracut-initqueue[763]: continue [ 266.037568] localhost dracut-initqueue[763]: fi [ 266.037568] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 266.037568] localhost dracut-initqueue[763]: is_nofail=$? [ 266.037568] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 266.037568] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 266.037568] localhost dracut-initqueue[763]: continue [ 266.037568] localhost dracut-initqueue[763]: fi [ 266.037568] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 266.037568] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 266.037568] localhost dracut-initqueue[763]: result=1 [ 266.037568] localhost dracut-initqueue[763]: fi [ 266.037568] localhost dracut-initqueue[763]: done [ 266.037568] localhost dracut-initqueue[763]: return $result [ 266.037568] localhost dracut-initqueue[763]: } [ 266.037568] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 266.037568] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 266.037568] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 266.056418] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 266.056418] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 266.056418] localhost dracut-initqueue[763]: fi" [ 266.056418] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 266.056418] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 266.056418] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 266.812759] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 266.814142] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 266.814142] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 266.814142] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 266.814142] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 266.814142] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 266.814142] localhost dracut-initqueue[763]: log_debug() { [ 266.814142] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 266.814142] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 266.814142] localhost dracut-initqueue[763]: } [ 266.814142] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 266.814142] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 266.814142] localhost dracut-initqueue[763]: result=0 [ 266.814142] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 266.814142] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 266.814142] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 266.814142] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 266.814142] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 266.814142] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 266.814142] localhost dracut-initqueue[763]: continue [ 266.814142] localhost dracut-initqueue[763]: fi [ 266.814142] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 266.814142] localhost dracut-initqueue[763]: is_bindmount=$? [ 266.814142] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 266.814142] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 266.814142] localhost dracut-initqueue[763]: continue [ 266.814142] localhost dracut-initqueue[763]: fi [ 266.814142] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 266.814142] localhost dracut-initqueue[763]: is_nofail=$? [ 266.814142] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 266.814142] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 266.814142] localhost dracut-initqueue[763]: continue [ 266.814142] localhost dracut-initqueue[763]: fi [ 266.814142] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 266.814142] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 266.814142] localhost dracut-initqueue[763]: result=1 [ 266.814142] localhost dracut-initqueue[763]: fi [ 266.814142] localhost dracut-initqueue[763]: done [ 266.814142] localhost dracut-initqueue[763]: return $result [ 266.814142] localhost dracut-initqueue[763]: } [ 266.814142] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 266.814142] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 266.814142] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 266.833385] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 266.833385] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 266.833385] localhost dracut-initqueue[763]: fi" [ 266.837290] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 266.837290] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 266.840110] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 267.559087] localhost dracut-initqueue[763]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 267.561575] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/90-crypt.sh: "[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*522b710447c14300b49af5603cddea77*-* ] || exit 1 [ 267.561575] localhost dracut-initqueue[763]: [ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*e983569c125544dd82016de51ca5385d*-* ] || exit 1" [ 267.567273] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/99-upgrade-mount-wait-check.sh: "#!/bin/bash [ 267.567273] localhost dracut-initqueue[763]: # shellcheck disable=SC1091 # The file must be always present to boot the system [ 267.567273] localhost dracut-initqueue[763]: type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh [ 267.567273] localhost dracut-initqueue[763]: log_debug() { [ 267.567273] localhost dracut-initqueue[763]: # TODO(pstodulk): The arg is probably not needed [ 267.567273] localhost dracut-initqueue[763]: getarg 'rd.upgrade.debug' && echo >&2 "Upgrade Initqueue Debug: $1" [ 267.567273] localhost dracut-initqueue[763]: } [ 267.567273] localhost dracut-initqueue[763]: check_reqs_in_dir() { [ 267.567273] localhost dracut-initqueue[763]: log_debug "Check resources from: $1" [ 267.567273] localhost dracut-initqueue[763]: result=0 [ 267.567273] localhost dracut-initqueue[763]: # shellcheck disable=SC2045 # Iterating over ls should be fine (there should be no whitespaces) [ 267.567273] localhost dracut-initqueue[763]: for fname in $(ls -1 "$1"); do [ 267.567273] localhost dracut-initqueue[763]: # We grep for What=/dev explicitly to exclude bind mounting units [ 267.567273] localhost dracut-initqueue[763]: resource_path=$(grep "^What=/dev/" "$1/$fname" | cut -d "=" -f2-) [ 267.567273] localhost dracut-initqueue[763]: if [ -z "$resource_path" ]; then [ 267.567273] localhost dracut-initqueue[763]: # Grep found no match, meaning that the unit is mounting something different than a block device [ 267.567273] localhost dracut-initqueue[763]: continue [ 267.567273] localhost dracut-initqueue[763]: fi [ 267.567273] localhost dracut-initqueue[763]: grep -E "^Options=.*bind.*" "$1/$fname" &>/dev/null [ 267.567273] localhost dracut-initqueue[763]: is_bindmount=$? [ 267.567273] localhost dracut-initqueue[763]: if [ $is_bindmount -eq 0 ]; then [ 267.567273] localhost dracut-initqueue[763]: # The unit contains Options=...,bind,..., or Options=...,rbind,... so it is a bind mount -> skip [ 267.567273] localhost dracut-initqueue[763]: continue [ 267.567273] localhost dracut-initqueue[763]: fi [ 267.567273] localhost dracut-initqueue[763]: grep -E "^Options=.*nofail.*" "$1/$fname" &>/dev/null [ 267.567273] localhost dracut-initqueue[763]: is_nofail=$? [ 267.567273] localhost dracut-initqueue[763]: if [ $is_nofail -eq 0 ]; then [ 267.567273] localhost dracut-initqueue[763]: # The unit contains Options=...,nofail,... so it is a nofail mount -> skip [ 267.567273] localhost dracut-initqueue[763]: continue [ 267.567273] localhost dracut-initqueue[763]: fi [ 267.567273] localhost dracut-initqueue[763]: if [ ! -e "$resource_path" ]; then [ 267.567273] localhost dracut-initqueue[763]: log_debug "Waiting for missing resource: '$resource_path'" [ 267.567273] localhost dracut-initqueue[763]: result=1 [ 267.567273] localhost dracut-initqueue[763]: fi [ 267.567273] localhost dracut-initqueue[763]: done [ 267.567273] localhost dracut-initqueue[763]: return $result [ 267.567273] localhost dracut-initqueue[763]: } [ 267.567273] localhost dracut-initqueue[763]: SYSTEMD_DIR="/usr/lib/systemd/system" [ 267.567273] localhost dracut-initqueue[763]: LOCAL_FS_MOUNT_DIR="$SYSTEMD_DIR/local-fs.target.requires" [ 267.567273] localhost dracut-initqueue[763]: check_reqs_in_dir "$LOCAL_FS_MOUNT_DIR"" [ 267.585012] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2fdisk\x2fby-uuid\x2fab0ebddf-3c19-424b-ae64-1b731dfb0a1f.sh: "if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then [ 267.585012] localhost dracut-initqueue[763]: [ -e "/dev/disk/by-uuid/ab0ebddf-3c19-424b-ae64-1b731dfb0a1f" ] [ 267.585012] localhost dracut-initqueue[763]: fi" [ 267.585012] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2froot.sh: "[ -e "/dev/rhel/root" ]" [ 267.585012] localhost dracut-initqueue[763]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2frhel\x2fswap.sh: "[ -e "/dev/rhel/swap" ]" [ 267.585012] localhost dracut-initqueue[763]: Warning: dracut-initqueue: starting timeout scripts [ 267.585012] localhost dracut-initqueue[763]: Warning: Could not boot. [ 267.612273] localhost systemd[1]: Starting Dracut Emergency Shell...