Building command: virt-v2v-inspector [-v -x -io vddk-file= -io vddk-file= -i libvirt -ic vpx://administrator%40vsphere.local@iad1rvctr01.iad1.example.com/IAD1-RES/host/IAD1R-E01/iad1ivyesxi-078.iad1.example.com?no_verify=1 -ip /etc/secret/secretKey --hostname infra-testmtv-01.iad1.example.com --root first --mac 00:50:56:a1:9c:4a:ip:10.76.90.166,10.76.90.1,23 --mac 00:50:56:a1:9c:4a:ip:fe80::250:56ff:fea1:9c4a,,64 --mac 00:50:56:a1:81:fe:ip:172.29.16.3,,20 --mac 00:50:56:a1:81:fe:ip:fe80::250:56ff:fea1:81fe,,64 -it vddk -io vddk-libdir=/opt/vmware-vix-disklib-distrib -io vddk-thumbprint=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E -io vddk-config=/mnt/vddk-conf/vddk-config-file -- infra-testmtv-01]
info: virt-v2v-inspector: virt-v2v 2.8.1rhel=10,release=10.el10_1 (x86_64)
info: libvirt version: 11.5.0
check_host_free_space: large_tmpdir=/var/tmp free_space=873839820800
[   0.0] Setting up the source: -i libvirt -ic vpx://administrator%40vsphere.local@iad1rvctr01.iad1.example.com/IAD1-RES/host/IAD1R-E01/iad1ivyesxi-078.iad1.example.com?no_verify=1 -it vddk infra-testmtv-01
virt-v2v-inspector: warning: libvirt domain ‘infra-testmtv-01’ is running or paused.  Converting a live guest will result in corrupted output. However this is safe if you're converting from a snapshot
libvirt xml is:
<domain type='vmware' id='310670' xmlns:vmware='http://libvirt.org/schemas/domain/vmware/1.0'>
  <name>infra-testmtv-01</name>
  <uuid>42218b98-c169-1b98-b8cc-3be4554e9056</uuid>
  <memory unit='KiB'>8388608</memory>
  <currentMemory unit='KiB'>8388608</currentMemory>
  <vcpu placement='static'>2</vcpu>
  <cputune>
    <shares>2000</shares>
  </cputune>
  <os firmware='efi'>
    <type arch='x86_64'>hvm</type>
  </os>
  <clock offset='utc'/>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <devices>
    <disk type='file' device='disk'>
      <source file='[IAD1R_E01_NTAP_DS04] infra-testmtv-01/infra-testmtv-01-000002.vmdk'/>
      <target dev='sda' bus='scsi'/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>
    <disk type='file' device='disk'>
      <source file='[IAD1R_E01_NTAP_DS04] infra-testmtv-01/infra-testmtv-01_1-000002.vmdk'/>
      <target dev='sdb' bus='scsi'/>
      <address type='drive' controller='0' bus='0' target='0' unit='1'/>
    </disk>
    <controller type='scsi' index='0' model='vmpvscsi'/>
    <interface type='vds'>
      <mac address='00:50:56:a1:9c:4a' type='generated'/>
      <source switchid='99022150-bb68-c51d-7628-d66f7e0fa0fa' portid='404' portgroupid='dvportgroup-68' connectionid='674944955'/>
      <model type='vmxnet3'/>
    </interface>
    <interface type='vds'>
      <mac address='00:50:56:a1:81:fe' type='generated'/>
      <source switchid='99022150-bb68-c51d-7628-d66f7e0fa0fa' portid='36474' portgroupid='dvportgroup-1461' connectionid='674946985'/>
      <model type='vmxnet3'/>
    </interface>
    <video>
      <model type='vmvga' vram='8192' primary='yes'/>
    </video>
  </devices>
  <vmware:datacenterpath>IAD1-RES</vmware:datacenterpath>
  <vmware:moref>vm-310670</vmware:moref>
</domain>

running nbdkit:
 LANG=C 'nbdkit' '--exit-with-parent' '--foreground' '--pidfile' '/tmp/v2vnbdkit.ZItRg7/nbdkit1.pid' '--unix' '/tmp/v2v.DPg9YD/in0' '--threads' '16' '-D' 'nbdkit.backend.datapath=0' '-D' 'vddk.stats=1' '-D' 'vddk.datapath=0' '--verbose' '--filter' 'multi-conn' '--filter' 'cow' '--filter' 'blocksize' '--filter' 'count' '--filter' 'retry' 'vddk' 'server=iad1rvctr01.iad1.example.com' 'vm=moref=vm-310670' 'user=administrator@vsphere.local' 'password=+/etc/secret/secretKey' 'config=/mnt/vddk-conf/vddk-config-file' 'libdir=/opt/vmware-vix-disklib-distrib' 'thumbprint=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E' 'minblock=512' 'maxdata=2M' 'multi-conn-mode=disable' 'cow-block-size=4096' 'cow-on-read=/tmp/v2v.DPg9YD/convert' 'export=*.vmdk'
nbdkit: debug: nbdkit 1.44.1 (nbdkit-1.44.1-2.el10)
nbdkit: debug: TLS disabled: could not load TLS certificates
nbdkit: debug: service mode: unix socket
nbdkit: debug: NBD URI: nbd+unix://?socket=/tmp/v2v.DPg9YD/in0
nbdkit: debug: registering plugin /usr/lib64/nbdkit/plugins/nbdkit-vddk-plugin.so
nbdkit: debug: registered plugin /usr/lib64/nbdkit/plugins/nbdkit-vddk-plugin.so (name vddk)
nbdkit: debug: vddk: load
nbdkit: debug: registering filter /usr/lib64/nbdkit/filters/nbdkit-retry-filter.so
nbdkit: debug: registered filter /usr/lib64/nbdkit/filters/nbdkit-retry-filter.so (name retry)
nbdkit: debug: retry: load
nbdkit: debug: registering filter /usr/lib64/nbdkit/filters/nbdkit-count-filter.so
nbdkit: debug: registered filter /usr/lib64/nbdkit/filters/nbdkit-count-filter.so (name count)
nbdkit: debug: count: load
nbdkit: debug: registering filter /usr/lib64/nbdkit/filters/nbdkit-blocksize-filter.so
nbdkit: debug: registered filter /usr/lib64/nbdkit/filters/nbdkit-blocksize-filter.so (name blocksize)
nbdkit: debug: blocksize: load
nbdkit: debug: registering filter /usr/lib64/nbdkit/filters/nbdkit-cow-filter.so
nbdkit: debug: registered filter /usr/lib64/nbdkit/filters/nbdkit-cow-filter.so (name cow)
nbdkit: debug: cow: load
nbdkit: debug: cow: temporary directory for overlay: /var/tmp
nbdkit: debug: registering filter /usr/lib64/nbdkit/filters/nbdkit-multi-conn-filter.so
nbdkit: debug: registered filter /usr/lib64/nbdkit/filters/nbdkit-multi-conn-filter.so (name multi-conn)
nbdkit: debug: multi-conn: load
nbdkit: debug: request processing: multi-conn (filter, first) -> cow (filter) -> blocksize (filter) -> count (filter) -> retry (filter) -> vddk (plugin, last)
nbdkit: debug: multi-conn: config key=server, value=iad1rvctr01.iad1.example.com
nbdkit: debug: cow: config key=server, value=iad1rvctr01.iad1.example.com
nbdkit: debug: blocksize: config key=server, value=iad1rvctr01.iad1.example.com
nbdkit: debug: count: config key=server, value=iad1rvctr01.iad1.example.com
nbdkit: debug: retry: config key=server, value=iad1rvctr01.iad1.example.com
nbdkit: debug: vddk: config key=server, value=iad1rvctr01.iad1.example.com
nbdkit: debug: multi-conn: config key=vm, value=moref=vm-310670
nbdkit: debug: cow: config key=vm, value=moref=vm-310670
nbdkit: debug: blocksize: config key=vm, value=moref=vm-310670
nbdkit: debug: count: config key=vm, value=moref=vm-310670
nbdkit: debug: retry: config key=vm, value=moref=vm-310670
nbdkit: debug: vddk: config key=vm, value=moref=vm-310670
nbdkit: debug: multi-conn: config key=user, value=administrator@vsphere.local
nbdkit: debug: cow: config key=user, value=administrator@vsphere.local
nbdkit: debug: blocksize: config key=user, value=administrator@vsphere.local
nbdkit: debug: count: config key=user, value=administrator@vsphere.local
nbdkit: debug: retry: config key=user, value=administrator@vsphere.local
nbdkit: debug: vddk: config key=user, value=administrator@vsphere.local
nbdkit: debug: multi-conn: config key=password, value=+/etc/secret/secretKey
nbdkit: debug: cow: config key=password, value=+/etc/secret/secretKey
nbdkit: debug: blocksize: config key=password, value=+/etc/secret/secretKey
nbdkit: debug: count: config key=password, value=+/etc/secret/secretKey
nbdkit: debug: retry: config key=password, value=+/etc/secret/secretKey
nbdkit: debug: vddk: config key=password, value=+/etc/secret/secretKey
nbdkit: debug: multi-conn: config key=config, value=/mnt/vddk-conf/vddk-config-file
nbdkit: debug: cow: config key=config, value=/mnt/vddk-conf/vddk-config-file
nbdkit: debug: blocksize: config key=config, value=/mnt/vddk-conf/vddk-config-file
nbdkit: debug: count: config key=config, value=/mnt/vddk-conf/vddk-config-file
nbdkit: debug: retry: config key=config, value=/mnt/vddk-conf/vddk-config-file
nbdkit: debug: vddk: config key=config, value=/mnt/vddk-conf/vddk-config-file
nbdkit: debug: multi-conn: config key=libdir, value=/opt/vmware-vix-disklib-distrib
nbdkit: debug: cow: config key=libdir, value=/opt/vmware-vix-disklib-distrib
nbdkit: debug: blocksize: config key=libdir, value=/opt/vmware-vix-disklib-distrib
nbdkit: debug: count: config key=libdir, value=/opt/vmware-vix-disklib-distrib
nbdkit: debug: retry: config key=libdir, value=/opt/vmware-vix-disklib-distrib
nbdkit: debug: vddk: config key=libdir, value=/opt/vmware-vix-disklib-distrib
nbdkit: debug: multi-conn: config key=thumbprint, value=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E
nbdkit: debug: cow: config key=thumbprint, value=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E
nbdkit: debug: blocksize: config key=thumbprint, value=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E
nbdkit: debug: count: config key=thumbprint, value=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E
nbdkit: debug: retry: config key=thumbprint, value=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E
nbdkit: debug: vddk: config key=thumbprint, value=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E
nbdkit: debug: multi-conn: config key=minblock, value=512
nbdkit: debug: cow: config key=minblock, value=512
nbdkit: debug: blocksize: config key=minblock, value=512
nbdkit: debug: multi-conn: config key=maxdata, value=2M
nbdkit: debug: cow: config key=maxdata, value=2M
nbdkit: debug: blocksize: config key=maxdata, value=2M
nbdkit: debug: multi-conn: config key=multi-conn-mode, value=disable
nbdkit: debug: multi-conn: config key=cow-block-size, value=4096
nbdkit: debug: cow: config key=cow-block-size, value=4096
nbdkit: debug: multi-conn: config key=cow-on-read, value=/tmp/v2v.DPg9YD/convert
nbdkit: debug: cow: config key=cow-on-read, value=/tmp/v2v.DPg9YD/convert
nbdkit: debug: multi-conn: config key=export, value=*.vmdk
nbdkit: debug: cow: config key=export, value=*.vmdk
nbdkit: debug: blocksize: config key=export, value=*.vmdk
nbdkit: debug: count: config key=export, value=*.vmdk
nbdkit: debug: retry: config key=export, value=*.vmdk
nbdkit: debug: vddk: config key=export, value=*.vmdk
nbdkit: debug: multi-conn: config_complete
nbdkit: debug: cow: config_complete
nbdkit: debug: blocksize: config_complete
nbdkit: debug: configured values minblock=512 maxdata=2097152 maxlen=0
nbdkit: debug: count: config_complete
nbdkit: debug: retry: config_complete
nbdkit: debug: vddk: config_complete
nbdkit: debug: using thread model: serialize_requests
nbdkit: debug: vddk: get_ready
nbdkit: debug: original command line occupies 670 bytes
nbdkit: debug: adding reexeced_=
nbdkit: debug: re-executing with updated LD_LIBRARY_PATH=/opt/vmware-vix-disklib-distrib/lib64
nbdkit: debug: nbdkit 1.44.1 (nbdkit-1.44.1-2.el10)
nbdkit: debug: TLS disabled: could not load TLS certificates
nbdkit: debug: service mode: unix socket
nbdkit: debug: NBD URI: nbd+unix://?socket=/tmp/v2v.DPg9YD/in0
nbdkit: debug: registering plugin /usr/lib64/nbdkit/plugins/nbdkit-vddk-plugin.so
nbdkit: debug: registered plugin /usr/lib64/nbdkit/plugins/nbdkit-vddk-plugin.so (name vddk)
nbdkit: debug: vddk: load
nbdkit: debug: registering filter /usr/lib64/nbdkit/filters/nbdkit-retry-filter.so
nbdkit: debug: registered filter /usr/lib64/nbdkit/filters/nbdkit-retry-filter.so (name retry)
nbdkit: debug: retry: load
nbdkit: debug: registering filter /usr/lib64/nbdkit/filters/nbdkit-count-filter.so
nbdkit: debug: registered filter /usr/lib64/nbdkit/filters/nbdkit-count-filter.so (name count)
nbdkit: debug: count: load
nbdkit: debug: registering filter /usr/lib64/nbdkit/filters/nbdkit-blocksize-filter.so
nbdkit: debug: registered filter /usr/lib64/nbdkit/filters/nbdkit-blocksize-filter.so (name blocksize)
nbdkit: debug: blocksize: load
nbdkit: debug: registering filter /usr/lib64/nbdkit/filters/nbdkit-cow-filter.so
nbdkit: debug: registered filter /usr/lib64/nbdkit/filters/nbdkit-cow-filter.so (name cow)
nbdkit: debug: cow: load
nbdkit: debug: cow: temporary directory for overlay: /var/tmp
nbdkit: debug: registering filter /usr/lib64/nbdkit/filters/nbdkit-multi-conn-filter.so
nbdkit: debug: registered filter /usr/lib64/nbdkit/filters/nbdkit-multi-conn-filter.so (name multi-conn)
nbdkit: debug: multi-conn: load
nbdkit: debug: request processing: multi-conn (filter, first) -> cow (filter) -> blocksize (filter) -> count (filter) -> retry (filter) -> vddk (plugin, last)
nbdkit: debug: multi-conn: config key=server, value=iad1rvctr01.iad1.example.com
nbdkit: debug: cow: config key=server, value=iad1rvctr01.iad1.example.com
nbdkit: debug: blocksize: config key=server, value=iad1rvctr01.iad1.example.com
nbdkit: debug: count: config key=server, value=iad1rvctr01.iad1.example.com
nbdkit: debug: retry: config key=server, value=iad1rvctr01.iad1.example.com
nbdkit: debug: vddk: config key=server, value=iad1rvctr01.iad1.example.com
nbdkit: debug: multi-conn: config key=vm, value=moref=vm-310670
nbdkit: debug: cow: config key=vm, value=moref=vm-310670
nbdkit: debug: blocksize: config key=vm, value=moref=vm-310670
nbdkit: debug: count: config key=vm, value=moref=vm-310670
nbdkit: debug: retry: config key=vm, value=moref=vm-310670
nbdkit: debug: vddk: config key=vm, value=moref=vm-310670
nbdkit: debug: multi-conn: config key=user, value=administrator@vsphere.local
nbdkit: debug: cow: config key=user, value=administrator@vsphere.local
nbdkit: debug: blocksize: config key=user, value=administrator@vsphere.local
nbdkit: debug: count: config key=user, value=administrator@vsphere.local
nbdkit: debug: retry: config key=user, value=administrator@vsphere.local
nbdkit: debug: vddk: config key=user, value=administrator@vsphere.local
nbdkit: debug: multi-conn: config key=config, value=/mnt/vddk-conf/vddk-config-file
nbdkit: debug: cow: config key=config, value=/mnt/vddk-conf/vddk-config-file
nbdkit: debug: blocksize: config key=config, value=/mnt/vddk-conf/vddk-config-file
nbdkit: debug: count: config key=config, value=/mnt/vddk-conf/vddk-config-file
nbdkit: debug: retry: config key=config, value=/mnt/vddk-conf/vddk-config-file
nbdkit: debug: vddk: config key=config, value=/mnt/vddk-conf/vddk-config-file
nbdkit: debug: multi-conn: config key=libdir, value=/opt/vmware-vix-disklib-distrib
nbdkit: debug: cow: config key=libdir, value=/opt/vmware-vix-disklib-distrib
nbdkit: debug: blocksize: config key=libdir, value=/opt/vmware-vix-disklib-distrib
nbdkit: debug: count: config key=libdir, value=/opt/vmware-vix-disklib-distrib
nbdkit: debug: retry: config key=libdir, value=/opt/vmware-vix-disklib-distrib
nbdkit: debug: vddk: config key=libdir, value=/opt/vmware-vix-disklib-distrib
nbdkit: debug: multi-conn: config key=thumbprint, value=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E
nbdkit: debug: cow: config key=thumbprint, value=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E
nbdkit: debug: blocksize: config key=thumbprint, value=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E
nbdkit: debug: count: config key=thumbprint, value=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E
nbdkit: debug: retry: config key=thumbprint, value=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E
nbdkit: debug: vddk: config key=thumbprint, value=9F:2F:3C:A8:BC:53:9A:C0:F8:3D:BC:07:A0:24:36:D2:4D:F4:45:5E
nbdkit: debug: multi-conn: config key=minblock, value=512
nbdkit: debug: cow: config key=minblock, value=512
nbdkit: debug: blocksize: config key=minblock, value=512
nbdkit: debug: multi-conn: config key=maxdata, value=2M
nbdkit: debug: cow: config key=maxdata, value=2M
nbdkit: debug: blocksize: config key=maxdata, value=2M
nbdkit: debug: multi-conn: config key=multi-conn-mode, value=disable
nbdkit: debug: multi-conn: config key=cow-block-size, value=4096
nbdkit: debug: cow: config key=cow-block-size, value=4096
nbdkit: debug: multi-conn: config key=cow-on-read, value=/tmp/v2v.DPg9YD/convert
nbdkit: debug: cow: config key=cow-on-read, value=/tmp/v2v.DPg9YD/convert
nbdkit: debug: multi-conn: config key=export, value=*.vmdk
nbdkit: debug: cow: config key=export, value=*.vmdk
nbdkit: debug: blocksize: config key=export, value=*.vmdk
nbdkit: debug: count: config key=export, value=*.vmdk
nbdkit: debug: retry: config key=export, value=*.vmdk
nbdkit: debug: vddk: config key=export, value=*.vmdk
nbdkit: debug: multi-conn: config key=password, value=-3
nbdkit: debug: cow: config key=password, value=-3
nbdkit: debug: blocksize: config key=password, value=-3
nbdkit: debug: count: config key=password, value=-3
nbdkit: debug: retry: config key=password, value=-3
nbdkit: debug: vddk: config key=password, value=-3
nbdkit: debug: multi-conn: config key=reexeced_, value=
nbdkit: debug: cow: config key=reexeced_, value=
nbdkit: debug: blocksize: config key=reexeced_, value=
nbdkit: debug: count: config key=reexeced_, value=
nbdkit: debug: retry: config key=reexeced_, value=
nbdkit: debug: vddk: config key=reexeced_, value=
nbdkit: debug: multi-conn: config_complete
nbdkit: debug: cow: config_complete
nbdkit: debug: blocksize: config_complete
nbdkit: debug: configured values minblock=512 maxdata=2097152 maxlen=0
nbdkit: debug: count: config_complete
nbdkit: debug: retry: config_complete
nbdkit: debug: vddk: config_complete
nbdkit: debug: cleaning up after re-exec
nbdkit: debug: using thread model: serialize_requests
nbdkit: debug: vddk: get_ready
nbdkit: debug: retry: get_ready thread_model=2
nbdkit: debug: count: get_ready thread_model=2
nbdkit: debug: blocksize: get_ready thread_model=2
nbdkit: debug: cow: get_ready thread_model=2
nbdkit: debug: multi-conn: get_ready thread_model=2
nbdkit: debug: bound to unix socket /tmp/v2v.DPg9YD/in0
nbdkit: debug: written pidfile /tmp/v2vnbdkit.ZItRg7/nbdkit1.pid
nbdkit: debug: vddk: after_fork
nbdkit: debug: VDDK call: VixDiskLib_InitEx (6, 5, &debug_fn, &error_fn, &error_fn, /opt/vmware-vix-disklib-distrib, /mnt/vddk-conf/..2025_12_15_19_12_32.1693496269/vddk-config-file)
nbdkit: debug: OBJLIB-LIB: Objlib initialized.
nbdkit: debug: VixDiskLib: Attempting to locate advanced transport module in "/opt/vmware-vix-disklib-distrib".
nbdkit: debug: VixDiskLib: Advanced transport plugin /opt/vmware-vix-disklib-distrib/lib64/libdiskLibPlugin.so was successfully loaded into vixDiskLib.
nbdkit: debug: VixDiskLib: Enabling advanced transport modes.
nbdkit: debug: DictionaryLoad: Cannot open file "/etc/vmware/config": No such file or directory.
nbdkit: debug: [msg.dictionary.load.openFailed] Cannot open file "/etc/vmware/config": No such file or directory.
nbdkit: debug: PREF Optional preferences file not found at /etc/vmware/config. Using default values.
nbdkit: debug: DictionaryLoad: Cannot open file "/usr/lib/vmware/settings": No such file or directory.
nbdkit: debug: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.
nbdkit: debug: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
nbdkit: debug: DictionaryLoad: Cannot open file "/usr/lib/vmware/config": No such file or directory.
nbdkit: debug: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/config": No such file or directory.
nbdkit: debug: PREF Optional preferences file not found at /usr/lib/vmware/config. Using default values.
nbdkit: debug: DictionaryLoad: Cannot open file "/home/qemu/.vmware/config": No such file or directory.
nbdkit: debug: [msg.dictionary.load.openFailed] Cannot open file "/home/qemu/.vmware/config": No such file or directory.
nbdkit: debug: PREF Optional preferences file not found at /home/qemu/.vmware/config. Using default values.
nbdkit: debug: DictionaryLoad: Cannot open file "/home/qemu/.vmware/preferences": No such file or directory.
nbdkit: debug: [msg.dictionary.load.openFailed] Cannot open file "/home/qemu/.vmware/preferences": No such file or directory.
nbdkit: debug: PREF Optional preferences file not found at /home/qemu/.vmware/preferences. Using default values.
nbdkit: debug: lib/ssl: OpenSSL using default provider
nbdkit: debug: lib/ssl: Client usage
nbdkit: debug: lib/ssl: protocol list tls1.2
nbdkit: debug: lib/ssl: protocol min 0x303 max 0x303
nbdkit: debug: lib/ssl: protocol list tls1.2 (openssl flags 0x36000000)
nbdkit: debug: lib/ssl: cipher list ECDHE+AESGCM:RSA+AESGCM:ECDHE+AES:RSA+AES
nbdkit: debug: lib/ssl: cipher suites TLS_AES_128_GCM_SHA256:TLS_AES_256_GCM_SHA384
nbdkit: debug: lib/ssl: curves list prime256v1:secp384r1:secp521r1
nbdkit: debug: lib/ssl: Server usage
nbdkit: debug: lib/ssl: protocol list tls1.2
nbdkit: debug: lib/ssl: protocol min 0x303 max 0x303
nbdkit: debug: lib/ssl: protocol list tls1.2 (openssl flags 0x36000000)
nbdkit: debug: lib/ssl: cipher list ECDHE+AESGCM:RSA+AESGCM:ECDHE+AES:RSA+AES
nbdkit: debug: lib/ssl: cipher suites TLS_AES_128_GCM_SHA256:TLS_AES_256_GCM_SHA384
nbdkit: debug: lib/ssl: curves list prime256v1:secp384r1:secp521r1
nbdkit: debug: VixDiskLib: Initialize transport modes.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] [NFC VERBOSE]NFC connection accept timeout: 180000 milliseconds
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] [NFC VERBOSE]NFC request timeout: 180000 milliseconds
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] [NFC VERBOSE]NFC read timeout: 60000 milliseconds
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] [NFC VERBOSE]NFC write timeout: 600000 milliseconds
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] [NFC VERBOSE]NFC fssrvr request timeout: 0 milliseconds
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] [NFC VERBOSE]NFC fssrvr write timeout: 0 milliseconds
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] [NFC VERBOSE]NFC max recv retries: 1
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] DictionaryLoad: Cannot open file "/etc/vmware/config": No such file or directory.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] [msg.dictionary.load.openFailed] Cannot open file "/etc/vmware/config": No such file or directory.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] PREF Optional preferences file not found at /etc/vmware/config. Using default values.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] DictionaryLoad: Cannot open file "/usr/lib/vmware/settings": No such file or directory.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] DictionaryLoad: Cannot open file "/usr/lib/vmware/config": No such file or directory.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/config": No such file or directory.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] PREF Optional preferences file not found at /usr/lib/vmware/config. Using default values.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] DictionaryLoad: Cannot open file "/home/qemu/.vmware/config": No such file or directory.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] [msg.dictionary.load.openFailed] Cannot open file "/home/qemu/.vmware/config": No such file or directory.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] PREF Optional preferences file not found at /home/qemu/.vmware/config. Using default values.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] DictionaryLoad: Cannot open file "/home/qemu/.vmware/preferences": No such file or directory.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] [msg.dictionary.load.openFailed] Cannot open file "/home/qemu/.vmware/preferences": No such file or directory.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] PREF Optional preferences file not found at /home/qemu/.vmware/preferences. Using default values.
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: OpenSSL using default provider
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: Client usage
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: protocol list tls1.2
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: protocol min 0x303 max 0x303
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: protocol list tls1.2 (openssl flags 0x36000000)
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: cipher list ECDHE+AESGCM:RSA+AESGCM:ECDHE+AES:RSA+AES
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: cipher suites TLS_AES_128_GCM_SHA256:TLS_AES_256_GCM_SHA384
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: curves list prime256v1:secp384r1:secp521r1
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: Server usage
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: protocol list tls1.2
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: protocol min 0x303 max 0x303
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: protocol list tls1.2 (openssl flags 0x36000000)
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: cipher list ECDHE+AESGCM:RSA+AESGCM:ECDHE+AES:RSA+AES
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: cipher suites TLS_AES_128_GCM_SHA256:TLS_AES_256_GCM_SHA384
nbdkit: debug: 2025-12-15T19:12:36.498Z info -[00041] [Originator@6876 sub=Libs] lib/ssl: curves list prime256v1:secp384r1:secp521r1
nbdkit: debug: 2025-12-15T19:12:36.591Z info -[00041] [Originator@6876 sub=Libs] [NFC INFO]Nfc_Init: Poll not initialized.
nbdkit: debug: VixDiskLib: Available transport modes: file:san:hotadd:nbdssl:nbd.
nbdkit: debug: VMware VixDiskLib (8.0.3) Release build-23950268
nbdkit: debug: VixDiskLib: PhoneHome is disabled.
nbdkit: debug: retry: after_fork
nbdkit: debug: count: after_fork
nbdkit: debug: blocksize: after_fork
nbdkit: debug: cow: after_fork
nbdkit: debug: multi-conn: after_fork
[   1.8] Opening the source
libguestfs: trace: set_verbose true
libguestfs: trace: set_verbose = 0
libguestfs: trace: set_identifier "v2v"
libguestfs: trace: v2v: set_identifier = 0
libguestfs: trace: v2v: set_program "virt-v2v"
libguestfs: trace: v2v: set_program = 0
libguestfs: trace: v2v: get_memsize
libguestfs: trace: v2v: get_memsize = 1280
libguestfs: trace: v2v: set_memsize 2560
libguestfs: trace: v2v: set_memsize = 0
libguestfs: trace: v2v: set_smp 8
libguestfs: trace: v2v: set_smp = 0
libguestfs: trace: v2v: set_network true
libguestfs: trace: v2v: set_network = 0
libguestfs: trace: v2v: add_drive "" "format:raw" "protocol:nbd" "server:unix:/tmp/v2v.DPg9YD/in0" "cachemode:unsafe" "discard:besteffort"
libguestfs: trace: v2v: add_drive = 0
libguestfs: trace: v2v: add_drive "" "format:raw" "protocol:nbd" "server:unix:/tmp/v2v.DPg9YD/in0" "cachemode:unsafe" "discard:besteffort"
libguestfs: trace: v2v: add_drive = 0
libguestfs: trace: v2v: launch
libguestfs: trace: v2v: max_disks
libguestfs: trace: v2v: max_disks = 255
libguestfs: trace: v2v: get_tmpdir
libguestfs: trace: v2v: get_tmpdir = "/tmp"
libguestfs: trace: v2v: version
libguestfs: trace: v2v: version = <struct guestfs_version = major: 1, minor: 56, release: 1, extra: rhel=10,release=3.el10,libvirt, >
libguestfs: trace: v2v: get_backend
libguestfs: trace: v2v: get_backend = "libvirt:qemu:///session"
libguestfs: launch: program=virt-v2v
libguestfs: launch: identifier=v2v
libguestfs: launch: version=1.56.1rhel=10,release=3.el10,libvirt
libguestfs: launch: backend registered: direct
libguestfs: launch: backend registered: libvirt
libguestfs: launch: backend=libvirt:qemu:///session
libguestfs: launch: tmpdir=/tmp/libguestfsvoOtxa
libguestfs: launch: umask=0022
libguestfs: launch: euid=107
libguestfs: launch: host: Linux poc-test-migration-1-vm-310670-inspection-22jq7 5.14.0-570.64.1.el9_6.x86_64 #1 SMP PREEMPT_DYNAMIC Fri Nov 7 09:12:37 EST 2025 x86_64
libguestfs: libvirt version = 11005000 (11.5.0)
libguestfs: guest random name = guestfs-guvp2e3o1du4lglu
libguestfs: connect to libvirt
libguestfs: opening libvirt handle: URI = qemu:///session, auth = default+wrapper, flags = 0
libguestfs: successfully opened libvirt handle: conn = 0x55bc5013db60
libguestfs: qemu version (reported by libvirt) = 10000000 (10.0.0)
libguestfs: get libvirt capabilities
libguestfs: parsing capabilities XML
libguestfs: trace: v2v: get_backend_setting "force_kvm"
libguestfs: trace: v2v: get_backend_setting = NULL (error)
libguestfs: trace: v2v: get_backend_setting "force_tcg"
libguestfs: trace: v2v: get_backend_setting = NULL (error)
libguestfs: parsing domcapabilities XML
libguestfs: trace: v2v: get_backend_setting "internal_libvirt_label"
libguestfs: trace: v2v: get_backend_setting = NULL (error)
libguestfs: trace: v2v: get_backend_setting "internal_libvirt_imagelabel"
libguestfs: trace: v2v: get_backend_setting = NULL (error)
libguestfs: trace: v2v: get_backend_setting "internal_libvirt_norelabel_disks"
libguestfs: trace: v2v: get_backend_setting = NULL (error)
libguestfs: build appliance
libguestfs: trace: v2v: get_cachedir
libguestfs: trace: v2v: get_cachedir = "/var/tmp"
libguestfs: begin building supermin appliance
libguestfs: run supermin
libguestfs: command: run: /usr/bin/supermin
libguestfs: command: run: \ --build
libguestfs: command: run: \ --verbose
libguestfs: command: run: \ --if-newer
libguestfs: command: run: \ --lock /var/tmp/.guestfs-107/lock
libguestfs: command: run: \ --copy-kernel
libguestfs: command: run: \ -f ext2
libguestfs: command: run: \ --host-cpu x86_64
libguestfs: command: run: \ /usr/lib64/guestfs/supermin.d
libguestfs: command: run: \ -o /var/tmp/.guestfs-107/appliance.d
supermin: version: 5.3.5
supermin: rpm: detected RPM version 4.19
supermin: rpm: detected RPM architecture x86_64
supermin: package handler: fedora/rpm
supermin: acquiring lock on /var/tmp/.guestfs-107/lock
supermin: build: /usr/lib64/guestfs/supermin.d
supermin: reading the supermin appliance
supermin: build: visiting /usr/lib64/guestfs/supermin.d/base.tar.gz type gzip base image (tar)
supermin: build: visiting /usr/lib64/guestfs/supermin.d/daemon.tar.gz type gzip base image (tar)
supermin: build: visiting /usr/lib64/guestfs/supermin.d/excludefiles type uncompressed excludefiles
supermin: build: visiting /usr/lib64/guestfs/supermin.d/hostfiles type uncompressed hostfiles
supermin: build: visiting /usr/lib64/guestfs/supermin.d/init.tar.gz type gzip base image (tar)
supermin: build: visiting /usr/lib64/guestfs/supermin.d/packages type uncompressed packages
supermin: build: visiting /usr/lib64/guestfs/supermin.d/udev-rules.tar.gz type gzip base image (tar)
supermin: build: visiting /usr/lib64/guestfs/supermin.d/zz-fssupport-deps type uncompressed packages
supermin: build: visiting /usr/lib64/guestfs/supermin.d/zz-fssupport.tar.gz type gzip base image (tar)
supermin: build: visiting /usr/lib64/guestfs/supermin.d/zz-packages-xfs type uncompressed packages
supermin: build: visiting /usr/lib64/guestfs/supermin.d/zz-winsupport-deps type uncompressed packages
supermin: build: visiting /usr/lib64/guestfs/supermin.d/zz-winsupport.tar.gz type gzip base image (tar)
supermin: mapping package names to installed packages
supermin: resolving full list of package dependencies
supermin: build: 178 packages, including dependencies
supermin: build: 31304 files
supermin: build: 7770 files, after matching excludefiles
supermin: build: 7778 files, after adding hostfiles
supermin: build: 7748 files, after removing unreadable files
supermin: build: 7777 files, after munging
supermin: kernel: looking for kernel using environment variables ...
supermin: kernel: looking for kernels in /lib/modules/*/vmlinuz ...
supermin: kernel: picked vmlinuz /lib/modules/6.12.0-124.8.1.el10_1.x86_64/vmlinuz
supermin: kernel: kernel_version 6.12.0-124.8.1.el10_1.x86_64
supermin: kernel: modpath /lib/modules/6.12.0-124.8.1.el10_1.x86_64
supermin: ext2: creating empty ext2 filesystem '/var/tmp/.guestfs-107/appliance.d.ei2kx802/root'
supermin: ext2: populating from base image
supermin: ext2: copying files from host filesystem
supermin: warning: /usr/bin/chfn: Permission denied (ignored)
Some distro files are not public readable, so supermin cannot copy them
into the appliance.  This is a problem with your Linux distro.  Please ask
your distro to stop doing pointless security by obscurity.
You can ignore these warnings.  You *do not* need to use sudo.
supermin: warning: /usr/bin/chsh: Permission denied (ignored)
supermin: warning: /usr/libexec/utempter/utempter: Permission denied (ignored)
supermin: warning: /usr/sbin/unix_update: Permission denied (ignored)
supermin: warning: /var/lib/systemd/random-seed: Permission denied (ignored)
supermin: ext2: copying kernel modules
supermin: ext2: creating minimal initrd '/var/tmp/.guestfs-107/appliance.d.ei2kx802/initrd'
supermin: ext2: wrote 35 modules to minimal initrd
supermin: renaming /var/tmp/.guestfs-107/appliance.d.ei2kx802 to /var/tmp/.guestfs-107/appliance.d
libguestfs: finished building supermin appliance
libguestfs: trace: v2v: disk_create "/tmp/libguestfsvoOtxa/overlay1.qcow2" "qcow2" -1 "backingfile:/var/tmp/.guestfs-107/appliance.d/root"
libguestfs: trace: v2v: disk_format "/var/tmp/.guestfs-107/appliance.d/root"
libguestfs: command: run: qemu-img --help | grep -sqE -- '\binfo\b.*-U\b'
libguestfs: command: run: qemu-img
libguestfs: command: run: \ info
libguestfs: command: run: \ -U
libguestfs: command: run: \ --output json
libguestfs: command: run: \ /var/tmp/.guestfs-107/appliance.d/root
libguestfs: parse_json: qemu-img info JSON output:\n{\n    "children": [\n        {\n            "name": "file",\n            "info": {\n                "children": [\n                ],\n                "virtual-size": 4294967296,\n                "filename": "/var/tmp/.guestfs-107/appliance.d/root",\n                "format": "file",\n                "actual-size": 401580032,\n                "format-specific": {\n                    "type": "file",\n                    "data": {\n                    }\n                },\n                "dirty-flag": false\n            }\n        }\n    ],\n    "virtual-size": 4294967296,\n    "filename": "/var/tmp/.guestfs-107/appliance.d/root",\n    "format": "raw",\n    "actual-size": 401580032,\n    "dirty-flag": false\n}\n\n
libguestfs: trace: v2v: disk_format = "raw"
libguestfs: command: run: qemu-img
libguestfs: command: run: \ create
libguestfs: command: run: \ -f qcow2
libguestfs: command: run: \ -o backing_file=/var/tmp/.guestfs-107/appliance.d/root,backing_fmt=raw
libguestfs: command: run: \ /tmp/libguestfsvoOtxa/overlay1.qcow2
libguestfs: Formatting '/tmp/libguestfsvoOtxa/overlay1.qcow2', fmt=qcow2 cluster_size=65536 extended_l2=off compression_type=zlib size=4294967296 backing_file=/var/tmp/.guestfs-107/appliance.d/root backing_fmt=raw lazy_refcounts=off refcount_bits=16\n
libguestfs: trace: v2v: disk_create = 0
libguestfs: trace: v2v: get_sockdir
libguestfs: trace: v2v: get_sockdir = "/tmp"
libguestfs: set_socket_create_context: setsockcreatecon failed: system_u:system_r:svirt_socket_t:s0:c833,c845: Permission denied [you can ignore this message if you are not using SELinux + sVirt]
libguestfs: clear_socket_create_context: setsockcreatecon failed: NULL: Permission denied [you can ignore this message if you are not using SELinux + sVirt]
libguestfs: create libvirt XML
libguestfs: command: run: passt --help
Usage: passt [OPTION]...

  -d, --debug\t\tBe verbose
      --trace\t\tBe extra verbose, implies --debug
  -q, --quiet\t\tDon't print informational messages
  -f, --foreground\tDon't run in background
    default: run in background
  -l, --log-file PATH\tLog (only) to given file
  --log-size BYTES\tMaximum size of log file
    default: 1 MiB
  --runas UID|UID:GID \tRun as given UID, GID, which can be
    numeric, or login and group names
    default: drop to user "nobody"
  -h, --help\t\tDisplay this help message and exit
  --version\t\tShow version and exit
  -s, --socket, --socket-path PATH\tUNIX domain socket path
    default: probe free path starting from /tmp/passt_1.socket
  --vhost-user\t\tEnable vhost-user mode
    UNIX domain socket is provided by -s option
  --print-capabilities\tprint back-end capabilities in JSON format,
    only meaningful for vhost-user mode
  --repair-path PATH\tpath for passt-repair(1)
    default: append '.repair' to UNIX domain path
  --migrate-exit\tDEPRECATED:
\t\t\tsource quits after migration
    default: source keeps running after migration
  --migrate-no-linger\tDEPRECATED:
\t\t\tclose sockets on migration
    default: keep sockets open, ignore events
  -F, --fd FD\t\tUse FD as pre-opened connected socket
  -p, --pcap FILE\tLog tap-facing traffic to pcap file
  -P, --pid FILE\tWrite own PID to the given file
  -m, --mtu MTU\tAssign MTU via DHCP/NDP
    a zero value disables assignment
    default: 65520: maximum 802.3 MTU minus 802.3 header
                    length, rounded to 32 bits (IPv4 words)
  -a, --address ADDR\tAssign IPv4 or IPv6 address ADDR
    can be specified zero to two times (for IPv4 and IPv6)
    default: use addresses from interface with default route
  -n, --netmask MASK\tAssign IPv4 MASK, dot-decimal or bits
    default: netmask from matching address on the host
  -M, --mac-addr ADDR\tUse source MAC address ADDR
    default: 9a:55:9a:55:9a:55 (locally administered)
  -g, --gateway ADDR\tPass IPv4 or IPv6 address as gateway
    default: gateway from interface with default route
  -i, --interface NAME\tInterface for addresses and routes
    default: from --outbound-if4 and --outbound-if6, if any
             otherwise interface with first default route
  -o, --outbound ADDR\tBind to address as outbound source
    can be specified zero to two times (for IPv4 and IPv6)
    default: use source address from routing tables
  --outbound-if4 NAME\tBind to outbound interface for IPv4
    default: use interface from default route
  --outbound-if6 NAME\tBind to outbound interface for IPv6
    default: use interface from default route
  -D, --dns ADDR\tUse IPv4 or IPv6 address as DNS
    can be specified multiple times
    a single, empty option disables DNS information
    default: use addresses from /etc/resolv.conf
  -S, --search LIST\tSpace-separated list, search domains
    a single, empty option disables the DNS search list
  -H, --hostname NAME \tHostname to configure client with
  --fqdn NAME\t\tFQDN to configure client with
    default: use search list from /etc/resolv.conf
  --no-dhcp-dns\tNo DNS list in DHCP/DHCPv6/NDP
  --no-dhcp-search\tNo list in DHCP/DHCPv6/NDP
  --map-host-loopback ADDR\tTranslate ADDR to refer to host
    can be specified zero to two times (for IPv4 and IPv6)
    default: gateway address
  --map-guest-addr ADDR\tTranslate ADDR to guest's address
    can be specified zero to two times (for IPv4 and IPv6)
    default: none
  --dns-forward ADDR\tForward DNS queries sent to ADDR
    can be specified zero to two times (for IPv4 and IPv6)
    default: don't forward DNS queries
  --dns-host ADDR\tHost nameserver to direct queries to
    can be specified zero to two times (for IPv4 and IPv6)
    default: first nameserver from host's /etc/resolv.conf
  --no-tcp\t\tDisable TCP protocol handler
  --no-udp\t\tDisable UDP protocol handler
  --no-icmp\t\tDisable ICMP/ICMPv6 protocol handler
  --no-dhcp\t\tDisable DHCP server
  --no-ndp\t\tDisable NDP responses
  --no-dhcpv6\t\tDisable DHCPv6 server
  --no-ra\t\tDisable router advertisements
  --freebind\t\tBind to any address for forwarding
  --no-map-gw\t\tDon't map galibguestfs: trace: v2v: get_cachedir
libguestfs: trace: v2v: get_cachedir = "/var/tmp"
libguestfs: libvirt XML:\n<?xml version="1.0"?>\n<domain type="kvm" xmlns:qemu="http://libvirt.org/schemas/domain/qemu/1.0">\n  <name>guestfs-guvp2e3o1du4lglu</name>\n  <memory unit="MiB">2560</memory>\n  <currentMemory unit="MiB">2560</currentMemory>\n  <cpu mode="maximum">\n    <feature policy="disable" name="la57"/>\n  </cpu>\n  <vcpu>8</vcpu>\n  <features>\n    <acpi/>\n  </features>\n  <clock offset="utc">\n    <timer name="rtc" tickpolicy="catchup"/>\n    <timer name="pit" tickpolicy="delay"/>\n    <timer name="hpet" present="no"/>\n  </clock>\n  <os>\n    <type machine="q35">hvm</type>\n    <kernel>/var/tmp/.guestfs-107/appliance.d/kernel</kernel>\n    <initrd>/var/tmp/.guestfs-107/appliance.d/initrd</initrd>\n    <cmdline>panic=1 console=ttyS0 edd=off udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1 cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable 8250.nr_uarts=1 root=UUID=d37501fb-9352-4c0d-8da1-9dc198125eb4 selinux=0 guestfs_verbose=1 guestfs_network=1 TERM=xterm guestfs_identifier=v2v</cmdline>\n    <bios useserial="yes"/>\n  </os>\n  <on_reboot>destroy</on_reboot>\n  <devices>\n    <rng model="virtio">\n      <backend model="random">/dev/urandom</backend>\n    </rng>\n    <controller type="scsi" index="0" model="virtio-scsi"/>\n    <disk device="disk" type="network">\n      <source protocol="nbd">\n        <host transport="unix" socket="/tmp/v2v.DPg9YD/in0"/>\n      </source>\n      <target dev="sda" bus="scsi"/>\n      <driver name="qemu" type="raw" cache="unsafe" discard="unmap"/>\n      <address type="drive" controller="0" bus="0" target="0" unit="0"/>\n    </disk>\n    <disk device="disk" type="network">\n      <source protocol="nbd">\n        <host transport="unix" socket="/tmp/v2v.DPg9YD/in0"/>\n      </source>\n      <target dev="sdb" bus="scsi"/>\n      <driver name="qemu" type="raw" cache="unsafe" discard="unmap"/>\n      <address type="drive" controller="0" bus="0" target="1" unit="0"/>\n    </disk>\n    <disk type="file" device="disk">\n      <source file="/tmp/libguestfsvoOtxa/overlay1.qcow2"/>\n      <target dev="sdc" bus="scsi"/>\n      <driver name="qemu" type="qcow2" cache="unsafe"/>\n      <address type="drive" controller="0" bus="0" target="2" unit="0"/>\n    </disk>\n    <serial type="unix">\n      <source mode="connect" path="/tmp/libguestfsjfoulX/console.sock"/>\n      <target port="0"/>\n    </serial>\n    <channel type="unix">\n      <source mode="connect" path="/tmp/libguestfsjfoulX/guestfsd.sock"/>\n      <target type="virtio" name="org.libguestfs.channel.0"/>\n    </channel>\n    <interface type="user">\n      <backend type="passt"/>\n      <model type="virtio"/>\n      <ip family="ipv4" address="169.254.2.15" prefix="16"/>\n    </interface>\n    <controller type="usb" model="none"/>\n    <memballoon model="none"/>\n  </devices>\n  <qemu:commandline>\n    <qemu:env name="TMPDIR" value="/var/tmp"/>\n  </qemu:commandline>\n</domain>\n
libguestfs: trace: v2v: get_cachedir
libguestfs: trace: v2v: get_cachedir = "/var/tmp"
libguestfs: command: run: ls
libguestfs: command: run: \ -a
libguestfs: command: run: \ -l
libguestfs: command: run: \ -R
libguestfs: command: run: \ -Z /var/tmp/.guestfs-107
libguestfs: /var/tmp/.guestfs-107:
libguestfs: total 0
libguestfs: drwxr-xr-x. 3 qemu qemu system_u:object_r:container_file_t:s0:c833,c845 37 Dec 15 19:12 .
libguestfs: drwxrwxrwt. 1 root root system_u:object_r:container_file_t:s0:c833,c845 37 Dec 15 19:12 ..
libguestfs: drwxr-xr-x. 2 qemu qemu system_u:object_r:container_file_t:s0:c833,c845 46 Dec 15 19:12 appliance.d
libguestfs: -rw-r--r--. 1 qemu qemu system_u:object_r:container_file_t:s0:c833,c845  0 Dec 15 19:12 lock
libguestfs: 
libguestfs: /var/tmp/.guestfs-107/appliance.d:
libguestfs: total 416268
libguestfs: drwxr-xr-x. 2 qemu qemu system_u:object_r:container_file_t:s0:c833,c845         46 Dec 15 19:12 .
libguestfs: drwxr-xr-x. 3 qemu qemu system_u:object_r:container_file_t:s0:c833,c845         37 Dec 15 19:12 ..
libguestfs: -rw-r--r--. 1 qemu qemu system_u:object_r:container_file_t:s0:c833,c845    8726528 Dec 15 19:12 initrd
libguestfs: -rwxr-xr-x. 1 qemu qemu system_u:object_r:container_file_t:s0:c833,c845   15948592 Dec 15 19:12 kernel
libguestfs: -rw-r--r--. 1 qemu qemu system_u:object_r:container_file_t:s0:c833,c845 4294967296 Dec 15 19:12 root
libguestfs: command: run: ls
libguestfs: command: run: \ -a
libguestfs: command: run: \ -l
libguestfs: command: run: \ -Z /tmp/libguestfsjfoulX
libguestfs: total 0
libguestfs: drwx------. 2 qemu qemu system_u:object_r:container_file_t:s0:c833,c845  47 Dec 15 19:12 .
libguestfs: drwxrwxrwt. 1 root root system_u:object_r:container_file_t:s0:c833,c845 115 Dec 15 19:12 ..
libguestfs: srwxr-xr-x. 1 qemu qemu system_u:object_r:container_file_t:s0:c833,c845   0 Dec 15 19:12 console.sock
libguestfs: srwxr-xr-x. 1 qemu qemu system_u:object_r:container_file_t:s0:c833,c845   0 Dec 15 19:12 guestfsd.sock
libguestfs: launch libvirt guest
nbdkit: debug: accepted connection
nbdkit: vddk[1]: debug: multi-conn: preconnect
nbdkit: vddk[1]: debug: cow: preconnect
nbdkit: vddk[1]: debug: blocksize: preconnect
nbdkit: vddk[1]: debug: count: preconnect
nbdkit: vddk[1]: debug: retry: preconnect
nbdkit: vddk[1]: debug: vddk: preconnect
nbdkit: vddk[1]: debug: newstyle negotiation: flags: global 0x3
nbdkit: vddk[1]: debug: newstyle negotiation: client flags: 0x3
nbdkit: vddk[1]: debug: replying to NBD_OPT_EXTENDED_HEADERS with NBD_REP_ERR_UNSUP
nbdkit: vddk[1]: debug: newstyle negotiation: NBD_OPT_STRUCTURED_REPLY: client requested structured replies
nbdkit: vddk[1]: debug: replying to NBD_OPT_STRUCTURED_REPLY with NBD_REP_ACK
nbdkit: vddk[1]: debug: newstyle negotiation: NBD_OPT_SET_META_CONTEXT: client requested export ''
nbdkit: vddk[1]: debug: newstyle negotiation: NBD_OPT_SET_META_CONTEXT: set count: 1
nbdkit: vddk[1]: debug: newstyle negotiation: NBD_OPT_SET_META_CONTEXT: set base:allocation
nbdkit: vddk[1]: debug: newstyle negotiation: NBD_OPT_SET_META_CONTEXT: replying with base:allocation id 1
nbdkit: vddk[1]: debug: replying to NBD_OPT_SET_META_CONTEXT with NBD_REP_ACK
nbdkit: vddk[1]: debug: newstyle negotiation: NBD_OPT_SET_META_CONTEXT: reply complete
nbdkit: vddk[1]: debug: newstyle negotiation: NBD_OPT_GO: client requested export ''
nbdkit: vddk[1]: debug: multi-conn: open readonly=0 exportname="" tls=0
nbdkit: vddk[1]: debug: multi-conn: default_export readonly=0 tls=0
nbdkit: vddk[1]: debug: cow: default_export readonly=0 tls=0
nbdkit: vddk[1]: debug: blocksize: default_export readonly=0 tls=0
nbdkit: vddk[1]: debug: count: default_export readonly=0 tls=0
nbdkit: vddk[1]: debug: retry: default_export readonly=0 tls=0
nbdkit: vddk[1]: debug: vddk: default_export readonly=0 tls=0
nbdkit: vddk[1]: debug: cow: open readonly=0 exportname="" tls=0
nbdkit: vddk[1]: debug: cow: default_export readonly=0 tls=0
nbdkit: vddk[1]: debug: cow: allocated new overlay for export ""
nbdkit: vddk[1]: debug: blocksize: open readonly=1 exportname="" tls=0
nbdkit: vddk[1]: debug: blocksize: default_export readonly=1 tls=0
nbdkit: vddk[1]: debug: count: open readonly=1 exportname="" tls=0
nbdkit: vddk[1]: debug: count: default_export readonly=1 tls=0
nbdkit: vddk[1]: debug: retry: open readonly=1 exportname="" tls=0
nbdkit: vddk[1]: debug: retry: default_export readonly=1 tls=0
nbdkit: vddk[1]: debug: vddk: open readonly=1 exportname="" tls=0
nbdkit: vddk[1]: debug: vddk: default_export readonly=1 tls=0
nbdkit: vddk[1]: error: access denied: client requested "" which does not match export="*.vmdk"
nbdkit: vddk[1]: debug: vddk: open returned handle (nil)
nbdkit: vddk[1]: debug: open failed: original errno = 108
nbdkit: vddk[1]: debug: retry 1: waiting 2 sec 0 nsec before retrying
nbdkit: vddk[1]: debug: vddk: open readonly=1 exportname="" tls=0
nbdkit: vddk[1]: debug: vddk: default_export readonly=1 tls=0
nbdkit: vddk[1]: error: access denied: client requested "" which does not match export="*.vmdk"
nbdkit: vddk[1]: debug: vddk: open returned handle (nil)
nbdkit: vddk[1]: debug: open failed: original errno = 108
nbdkit: vddk[1]: debug: retry 2: waiting 4 sec 0 nsec before retrying
nbdkit: vddk[1]: debug: vddk: open readonly=1 exportname="" tls=0
nbdkit: vddk[1]: debug: vddk: default_export readonly=1 tls=0
nbdkit: vddk[1]: error: access denied: client requested "" which does not match export="*.vmdk"
nbdkit: vddk[1]: debug: vddk: open returned handle (nil)
nbdkit: vddk[1]: debug: open failed: original errno = 108
nbdkit: vddk[1]: debug: retry 3: waiting 8 sec 0 nsec before retrying
nbdkit: vddk[1]: debug: vddk: open readonly=1 exportname="" tls=0
nbdkit: vddk[1]: debug: vddk: default_export readonly=1 tls=0
nbdkit: vddk[1]: error: access denied: client requested "" which does not match export="*.vmdk"
nbdkit: vddk[1]: debug: vddk: open returned handle (nil)
nbdkit: vddk[1]: debug: open failed: original errno = 108
nbdkit: vddk[1]: debug: retry 4: waiting 16 sec 0 nsec before retrying
nbdkit: vddk[1]: debug: vddk: open readonly=1 exportname="" tls=0
nbdkit: vddk[1]: debug: vddk: default_export readonly=1 tls=0
nbdkit: vddk[1]: error: access denied: client requested "" which does not match export="*.vmdk"
nbdkit: vddk[1]: debug: vddk: open returned handle (nil)
nbdkit: vddk[1]: debug: open failed: original errno = 108
nbdkit: vddk[1]: debug: retry 5: waiting 32 sec 0 nsec before retrying
nbdkit: vddk[1]: debug: vddk: open readonly=1 exportname="" tls=0
nbdkit: vddk[1]: debug: vddk: default_export readonly=1 tls=0
nbdkit: vddk[1]: error: access denied: client requested "" which does not match export="*.vmdk"
nbdkit: vddk[1]: debug: vddk: open returned handle (nil)
nbdkit: vddk[1]: debug: could not recover after 5 retries
nbdkit: vddk[1]: debug: retry: open returned handle (nil)
nbdkit: vddk[1]: debug: count: open returned handle (nil)
nbdkit: vddk[1]: debug: blocksize: open returned handle (nil)
nbdkit: vddk[1]: debug: cow: open returned handle (nil)
nbdkit: vddk[1]: debug: multi-conn: open returned handle (nil)
nbdkit: vddk[1]: debug: replying to NBD_OPT_GO with NBD_REP_ERR_UNKNOWN
nbdkit: vddk[1]: debug: replying to NBD_OPT_ABORT with NBD_REP_ACK
nbdkit: vddk[1]: debug: write: NBD_OPT_ABORT: Broken pipe
libguestfs: clear_socket_create_context: setsockcreatecon failed: NULL: Permission denied [you can ignore this message if you are not using SELinux + sVirt]
libguestfs: trace: v2v: launch = -1 (error)
virt-v2v-inspector: error: libguestfs error: could not create appliance through libvirt. Original error from libvirt: internal error: process exited while connecting to monitor: 2025-12-15T19:13:43.353193Z qemu-kvm: -blockdev {"driver":"nbd","server":{"type":"unix","path":"/tmp/v2v.DPg9YD/in0"},"node-name":"libvirt-3-storage","read-only":false,"discard":"unmap","cache":{"direct":false,"no-flush":true}}: Requested export not available
server reported: access denied: client requested "" which does not match export="*.vmdk" [code=1 int1=-1]
rm -rf -- '/tmp/v2vnbdkit.ZItRg7'
nbdkit: debug: multi-conn: cleanup
nbdkit: debug: cow: cleanup
nbdkit: debug: blocksize: cleanup
nbdkit: debug: count: cleanup
nbdkit: debug: retry: cleanup
nbdkit: debug: vddk: cleanup
nbdkit: debug: vddk: unload plugin
nbdkit: debug: VDDK call: VixDiskLib_Exit ()
nbdkit: debug: VixDiskLib: VixDiskLib_Exit: Unmatched Init calls so far: 1.
rm -rf -- '/tmp/v2v.DPg9YD'
libguestfs: trace: v2v: close
libguestfs: closing guestfs handle 0x55bc5013d4c0 (state 0)
libguestfs: command: run: rm
libguestfs: command: run: \ -rf /tmp/libguestfsvoOtxa
libguestfs: command: run: rm
libguestfs: command: run: \ -rf /tmp/libguestfsjfoulX
Failed to execute virt-v2v-inspector command exit status 1