[1361913.955067] ucsi_acpi USBC000:00: ucsi_handle_connector_change: GET_CONNECTOR_STATUS failed (-110)
[1371471.356454] usb 1-4: USB disconnect, device number 26
[1371471.356472] usb 1-4.2: USB disconnect, device number 28
[1371471.391075] usb 4-1: USB disconnect, device number 78
[1371471.391093] r8152-cfgselector 4-1.1: USB disconnect, device number 79
[1371471.415193] usb 4-1.2: USB disconnect, device number 80
[1371471.415217] usb 4-1.2.4: USB disconnect, device number 81
[1371497.022581] wlp0s20f3: deauthenticating from ac:23:16:9e:f0:93 by local choice (Reason: 3=DEAUTH_LEAVING)
[1371498.248231] PM: suspend entry (deep)
[1371498.263901] Filesystems sync: 0.015 seconds
[1371498.263914] PM: Preparing system for sleep (deep)
[1371498.363042] Freezing user space processes ... (elapsed 0.002 seconds) done.
[1371498.365914] OOM killer disabled.
[1371498.365916] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[1371498.367169] PM: Suspending system (deep)
[1371498.367210] printk: Suspending console(s) (use no_console_suspend to debug)
[1371499.995626] xhci_hcd 0000:2c:00.0: xHC error in resume, USBSTS 0x401, Reinit
[1371499.995638] usb usb3: root hub lost power or was reset
[1371499.995642] usb usb4: root hub lost power or was reset
[1371500.123606] ACPI: EC: interrupt blocked
[1371500.177265] ACPI: PM: Preparing to enter system sleep state S3
[1371500.183784] ACPI: EC: event blocked
[1371500.183785] ACPI: EC: EC stopped
[1371500.183786] ACPI: PM: Saving platform NVS memory
[1371500.183933] Disabling non-boot CPUs ...
[1371500.186022] smpboot: CPU 1 is now offline
[1371500.188359] smpboot: CPU 2 is now offline
[1371500.189431] irq_migrate_all_off_this_cpu: 10 callbacks suppressed
[1371500.189434] IRQ 200: no longer affine to CPU3
[1371500.190452] smpboot: CPU 3 is now offline
[1371500.191820] IRQ 201: no longer affine to CPU4
[1371500.192840] smpboot: CPU 4 is now offline
[1371500.194140] IRQ 190: no longer affine to CPU5
[1371500.194147] IRQ 191: no longer affine to CPU5
[1371500.194151] IRQ 193: no longer affine to CPU5
[1371500.194154] IRQ 195: no longer affine to CPU5
[1371500.194157] IRQ 197: no longer affine to CPU5
[1371500.194160] IRQ 198: no longer affine to CPU5
[1371500.194163] IRQ 199: no longer affine to CPU5
[1371500.195518] smpboot: CPU 5 is now offline
[1371500.198774] smpboot: CPU 6 is now offline
[1371500.199873] IRQ 143: no longer affine to CPU7
[1371500.200907] smpboot: CPU 7 is now offline
[1371500.203521] smpboot: CPU 8 is now offline
[1371500.205537] smpboot: CPU 9 is now offline
[1371500.207465] smpboot: CPU 10 is now offline
[1371500.209497] smpboot: CPU 11 is now offline
[1371500.217345] ACPI: PM: Low-level resume complete
[1371500.217409] ACPI: EC: EC started
[1371500.217412] ACPI: PM: Restoring platform NVS memory
[1371500.218761] Enabling non-boot CPUs ...
[1371500.218866] smpboot: Booting Node 0 Processor 1 APIC 0x2
[1371500.228604] CPU1 is up
[1371500.228749] smpboot: Booting Node 0 Processor 2 APIC 0x4
[1371500.236436] CPU2 is up
[1371500.236499] smpboot: Booting Node 0 Processor 3 APIC 0x6
[1371500.244511] CPU3 is up
[1371500.244569] smpboot: Booting Node 0 Processor 4 APIC 0x8
[1371500.252602] CPU4 is up
[1371500.252646] smpboot: Booting Node 0 Processor 5 APIC 0xa
[1371500.260713] CPU5 is up
[1371500.260767] smpboot: Booting Node 0 Processor 6 APIC 0x1
[1371500.264219] CPU6 is up
[1371500.264284] smpboot: Booting Node 0 Processor 7 APIC 0x3
[1371500.268939] CPU7 is up
[1371500.268986] smpboot: Booting Node 0 Processor 8 APIC 0x5
[1371500.273974] CPU8 is up
[1371500.274023] smpboot: Booting Node 0 Processor 9 APIC 0x7
[1371500.279082] CPU9 is up
[1371500.279125] smpboot: Booting Node 0 Processor 10 APIC 0x9
[1371500.284579] CPU10 is up
[1371500.284626] smpboot: Booting Node 0 Processor 11 APIC 0xb
[1371500.289331] CPU11 is up
[1371500.303019] ACPI: PM: Waking up from system sleep state S3
[1371500.422513] ACPI: EC: interrupt unblocked
[1371501.733630] ACPI: EC: event unblocked
[1371501.741582] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[1371501.741743] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[1371501.741825] i915 0000:00:02.0: [drm] [ENCODER:113:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[1371501.741987] i915 0000:00:02.0: [drm] [ENCODER:120:DDI D/PHY D] is disabled/in DSI mode with an ungated DDI clock, gate it
[1371501.758396] nvme nvme0: Shutdown timeout set to 8 seconds
[1371501.758419] nvme nvme1: Shutdown timeout set to 8 seconds
[1371501.769057] nvme nvme1: 12/0/0 default/read/poll queues
[1371501.772513] nvme nvme0: 12/0/0 default/read/poll queues
[1371502.026101] usb 1-8: reset high-speed USB device number 5 using xhci_hcd
[1371502.114658] typec port0-partner: PM: parent port0 should not be sleeping
[1371502.449895] PM: Finishing wakeup.
[1371502.449950] pci_bus 0000:06: Allocating resources
[1371502.449971] pci_bus 0000:2c: Allocating resources
[1371502.450437] pci_bus 0000:06: Allocating resources
[1371502.450452] pci_bus 0000:2c: Allocating resources
[1371502.450624] OOM killer enabled.
[1371502.450626] Restarting tasks ... done.
[1371502.461853] random: crng reseeded on system resumption
[1371502.532299] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4690]
[1371502.534756] PM: suspend exit
[1371502.561043] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1160..]
[1371502.563828] usb 1-4: new high-speed USB device number 29 using xhci_hcd
[1371502.575462] usb 4-1: new SuperSpeed USB device number 82 using xhci_hcd
[1371502.603642] usb 4-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.50
[1371502.603651] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[1371502.603654] usb 4-1: Product: 2-Port USB 3.0 Hub
[1371502.603656] usb 4-1: Manufacturer: Generic
[1371502.613138] hub 4-1:1.0: USB hub found
[1371502.614641] hub 4-1:1.0: 4 ports detected
[1371502.707116] usb 1-4: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.50
[1371502.707126] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[1371502.707128] usb 1-4: Product: 4-Port USB 2.0 Hub
[1371502.707131] usb 1-4: Manufacturer: Generic
[1371502.709581] hub 1-4:1.0: USB hub found
[1371502.711065] hub 1-4:1.0: 4 ports detected
[1371502.713463] usb 1-9: USB disconnect, device number 27
[1371502.827822] usb 1-9: new full-speed USB device number 30 using xhci_hcd
[1371502.897916] usb 4-1.1: new SuperSpeed USB device number 83 using xhci_hcd
[1371502.911514] usb 4-1.1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=31.00
[1371502.911521] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[1371502.911523] usb 4-1.1: Product: USB 10/100/1000 LAN
[1371502.911524] usb 4-1.1: Manufacturer: Realtek
[1371502.911526] usb 4-1.1: SerialNumber: 001000001
[1371502.955778] usb 1-9: New USB device found, idVendor=06cb, idProduct=00bd, bcdDevice= 0.00
[1371502.955784] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[1371502.955786] usb 1-9: SerialNumber: c7f1e5f1c180
[1371502.984194] r8152-cfgselector 4-1.1: reset SuperSpeed USB device number 83 using xhci_hcd
[1371503.016756] r8152 4-1.1:1.0: load rtl8153b-2 v2 04/27/23 successfully
[1371503.030813] usb 1-4.1: new high-speed USB device number 31 using xhci_hcd
[1371503.045305] r8152 4-1.1:1.0 eth0: v1.12.13
[1371503.120075] usb 1-4.1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=89.32
[1371503.120081] usb 1-4.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[1371503.120082] usb 1-4.1: Product: USB2.0 Hub
[1371503.120929] hub 1-4.1:1.0: USB hub found
[1371503.121213] hub 1-4.1:1.0: 4 ports detected
[1371503.134656] r8152 4-1.1:1.0 enp44s0u1u1: renamed from eth0
[1371503.394820] usb 1-4.1.2: new full-speed USB device number 32 using xhci_hcd
[1371503.483770] usb 1-4.1.2: New USB device found, idVendor=04e8, idProduct=f649, bcdDevice= 0.00
[1371503.483778] usb 1-4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[1371503.483780] usb 1-4.1.2: Product: Samsung Type-C Monitor
[1371503.483782] usb 1-4.1.2: Manufacturer: Cypress Semiconductor
[1371503.483784] usb 1-4.1.2: SerialNumber: 11AD1D04D3932F0C20090B00
[1371503.497598] hid-generic 0003:04E8:F649.0058: hiddev97,hidraw2: USB HID v1.11 Device [Cypress Semiconductor Samsung Type-C Monitor] on usb-0000:00:14.0-4.1.2/input1
[1371506.266954] wlp0s20f3: authenticate with ac:23:16:9e:f0:93 (local address=6c:94:66:25:42:39)
[1371506.267814] wlp0s20f3: send auth to ac:23:16:9e:f0:93 (try 1/3)
[1371506.295332] wlp0s20f3: authenticated
[1371506.295790] wlp0s20f3: associate with ac:23:16:9e:f0:93 (try 1/3)
[1371506.297451] wlp0s20f3: RX AssocResp from ac:23:16:9e:f0:93 (capab=0x1011 status=0 aid=61)
[1371506.305617] wlp0s20f3: associated
[1371506.328464] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20f3: link becomes ready
[1371506.349174] IPv6: ADDRCONF(NETDEV_CHANGE): enp44s0u1u1: link becomes ready
[1371506.349370] r8152 4-1.1:1.0 enp44s0u1u1: carrier on
[1371506.349731] wlp0s20f3: Limiting TX power to 30 (30 - 0) dBm as advertised by ac:23:16:9e:f0:93
[1371537.981206] rfkill: input handler enabled
[1371538.143635] xdg-desktop-por[675895]: segfault at 0 ip 0000000000000000 sp 00007ffed3ff0698 error 14 in xdg-desktop-portal-gtk[558f04b7c000+11000] likely on CPU 10 (core 4, socket 0)
[1371538.143713] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[1371552.171716] rfkill: input handler disabled
[1371559.850126] usb 1-4.1.2: USB disconnect, device number 32