ilouser@10.8.247.46's password: +----------------------------------------------------------------------+ ¦ • MobaXterm Personal Edition v22.1 • ¦ ¦ (SSH client, X server and network tools) ¦ ¦ ¦ ¦ ? SSH session to ilouser@10.8.247.46 ¦ ¦ • Direct SSH : ? ¦ ¦ • SSH compression : ? (disabled or not supported by server) ¦ ¦ • SSH-browser : ? ¦ ¦ • X11-forwarding : ? (disabled or not supported by server) ¦ ¦ ¦ ¦ ? For more info, ctrl+click on help or visit our website. ¦ +----------------------------------------------------------------------+ User:ilouser logged-in to ILOCZ22080FY9.(10.8.247.46 / FE80::5EBA:2CFF:FE43:832A) Integrated Lights-Out 5 iLO Advanced 2.60 at Dec 06 2021 Server Name: Server Power: On hpiLO-> vsp Virtual Serial Port Active: COM1 Starting virtual serial port. Press 'ESC (' to return to the CLI Session. EFI stub: UEFI Secure Boot is enabled. Secure Start verification in progress. This may take a few seconds... Recommended Terminal Window Size = 100x31 ========================================= HPE ProLiant System BIOS U46 v1.58 (01/13/2022) (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP Early system initialization, please wait... iLO 5 IPv4: iLO 5 IPv6: iLO 5 IPv4: 10.8.247.46 iLO 5 IPv6: FE80::5EBA:2CFF:FE43:832A Fail to process new found FV, FV may be corrupted! ERROR: Internal fabric error detected!! PSF PID:0xBA, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0xBC, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF InstallHeciTransportPpis, start InstallHeciTransportPpis, end [HECI CONTROL PEI] HECI Transport found: 2 [HECI] [ME] (MeType is ME_TYPE_SPS) Initialization is allowed Initialization is not allowed Initialization is not allowed 2%: System Chipset Initialization Couldn't read Flash Security Override [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) Error: Update PEI FuSa (SAF) policy! Status: Not Found LtStatusRegister[0xFED30000] = 0x0000000000004092 LtExtendedStatusError[0xFED30008] = 0x0000000000000000 BootGuardBootStatus[0xFED300A0] = 0x9D54000080002000 BootGuardAcmError[0xFED30328] = 0x00000000C0008000 MSR_BOOT_GUARD_SACM_INFO[0x0000013A] = 0x0000000F0000007D Platform Type = 10 [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) MeUmaConfigureRequestedSegmentSize: Exiting (Status = Success) 4%: UPI Link Initialization - Start [IIO](UBA) [0.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p01] 0 | 1 | 1 | 0 | 0x00 | 0 [IIO](UBA) [0 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p05] 0 | 1 | 2 | 0 | 0x00 | 0 [IIO](UBA) [0 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.4] Bifurcation = 3 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p13] 0 | 1 | 255 | 0 | 0x00 | 0 [IIO](UBA) [0 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p15] 0 | 1 | 10 | 0 | 0x00 | 0 [IIO](UBA) [0 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p17] 0 | 1 | 13 | 1 | 0x00 | 0 [IIO](UBA) [0 p18] 0 | 1 | 14 | 1 | 0x00 | 0 [IIO](UBA) [0 p19] 0 | 1 | 15 | 1 | 0x00 | 0 [IIO](UBA) [0 p20] 0 | 1 | 16 | 1 | 0x00 | 0 [IIO](UBA) [1.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p01] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p05] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.4] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p13] 0 | 1 | 3 | 0 | 0x00 | 0 [IIO](UBA) [1 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p15] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p17] 0 | 1 | 29 | 1 | 0x00 | 0 [IIO](UBA) [1 p18] 0 | 1 | 30 | 1 | 0x00 | 0 [IIO](UBA) [1 p19] 0 | 1 | 31 | 1 | 0x00 | 0 [IIO](UBA) [1 p20] 0 | 1 | 32 | 1 | 0x00 | 0 BuildCpuTopologyInfoHob: Failed to Build Cpu Info Hob 5%: UPI Link Initialization - Complete [IIO](VMD) [0] VMD disabled for RPs init. PCH Detect: MMIO base on Socket 1, is 0, skipping! WARNING: Platform does not support uplink port! [IIO](VMD) [1] VMD disabled for RPs init. 7%: Early Processor Initialization PrevBootErrors: No Memory MCA Error Found PrevBootErrors - Valid MCA UC entries: 0 9%: Memory Initialization - Start C00: REFRESH_SYNC_TIME_PerCh= 7800 C00: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C00: HostRefreshStartTime= 7800 C00: HostRefreshStartTime= 7800 C01: HostRefreshStartTime= 7807 C01: HostRefreshStartTime= 7800 C02: HostRefreshStartTime= 7809 C02: HostRefreshStartTime= 7807 C03: HostRefreshStartTime= 7793 C03: HostRefreshStartTime= 7801 C04: HostRefreshStartTime= 7703 C04: HostRefreshStartTime= 7708 C05: HostRefreshStartTime= 7800 C05: HostRefreshStartTime= 7791 C06: HostRefreshStartTime= 7789 C06: HostRefreshStartTime= 7795 C07: HostRefreshStartTime= 7790 C07: HostRefreshStartTime= 7790 EnableHostRefresh Start Write Time diff[1]=127 ns EnableHostRefresh Start Write Time diff[1]=116 ns EnableHostRefresh Start Write Time diff[2]=307 ns EnableHostRefresh Start Write Time diff[2]=253 ns EnableHostRefresh Start Write Time diff[3]=161 ns EnableHostRefresh Start Write Time diff[3]=221 ns EnableHostRefresh Start Write Time diff[4]=255 ns EnableHostRefresh Start Write Time diff[4]=225 ns EnableHostRefresh Start Write Time diff[5]=267 ns EnableHostRefresh Start Write Time diff[5]=252 ns EnableHostRefresh Start Write Time diff[6]=255 ns EnableHostRefresh Start Write Time diff[6]=226 ns EnableHostRefresh Start Write Time diff[7]=271 ns EnableHostRefresh Start Write Time diff[7]=230 ns PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found [IIO](VMD) VMD init registered on endOfPei. WARNING: 00:46:04.0: Device 1077-8070 link width trained below capability WARNING: (RPLINKCAP 0x0F7A4084, RPLINKSTS 0x00003043) WARNING: (EPLINKCAP 0x0045F083, EPLINKSTS 0x00001043) PeiMemoryBaseAddress: 0x000000000E66E000. 18%: Memory Initialization - Complete ME UMA PostMem: SendDramInitDone (): InitStat = 0 ME UMA PostMem: BiosAction = 7 ME UMA PostMem: MeDramInitDone Complete. Checking for reset... Initialization is not allowed Platform Type = 10 Fail to process new found FV, FV may be corrupted! Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 TPM Measurement - Start TPM Measurement - Complete LocatePpi status = Success [SmbusErrataFix.c] Execute EfiSmbusSendByte (0xE2) mdatabyte = 4, Status = Device Error Install SgxInit Ppi : 0 Error: SgxRegistrationStatus report error code: 0x15 SGX disabled, exiting [IIO](TH) PCH Trace Hub not accessible [IPMI] mIpmiInstance->KcsTimeoutPeriod: 0x186A0 [IPMI] BMC Device ID: 0x13, firmware version: 2.60 UpdateMode:0 IPMI Dxe:Get BMC Device Id 21%: SMBIOS Table Initialization No ME Policy Protocol availableNo ME Policy Protocol availableUsbPortXhci Dxe driver:PlatformType=10 ConvertPages: failed to find range 94000000 - 97FFFFFF AllocateManagementDeviceBarSpace: SetMemorySpaceAttributes for Flash Device region failed! Status = 00000002 25%: USB Controller Initialization 28%: Chipset Root Ports Initialization 32%: HPE Memory Initialization HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr AE. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A0. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A2. ConvertPages: failed to find range 70000000 - 77BFFFFF HpTranslateTlsCipherList (715): Input / output data is null or input data size is invalid [OtaDxe.c] OtaDxeDriverEntry() { [OtaDxe.c] OtaDxeDriverEntry() -> Create OTA Event [OtaDxe.c] OtaDxeDriverEntry() -> OTA Event creation: Success [OtaDxe.c] OtaDxeDriverEntry() } Success [OtaShellCommands.c] OtaShellCommandsEntry() { [OtaShellCommands.c] OtaShellCommandsEntry() -> Init OTA Shell Commands Table [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaShell -> Success [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaConfig -> Success [OtaShellCommands.c] OtaShellCommandsEntry() } Success Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 ConvertPages: failed to find range F0000 - FFFFF ConvertPages: failed to find range 6F800000 - 6FFFFFFF ConvertPages: failed to find range 70000000 - 77BFFFFF ConvertPages: failed to find range 77C00000 - 7FFFFFFF ConvertPages: failed to find range 80000000 - 8FFFFFFF ConvertPages: failed to find range 90000000 - 93FFFFFF ConvertPages: failed to find range 94000000 - 97FFFFFF ConvertPages: failed to find range 98000000 - 99C0FFFF ConvertPages: failed to find range 99C10000 - A47FBFFF ConvertPages: failed to find range A4800000 - AE3FBFFF ConvertPages: failed to find range AE400000 - B7FFBFFF ConvertPages: failed to find range B8000000 - C1BFBFFF ConvertPages: failed to find range C1C00000 - CAFFBFFF ConvertPages: failed to find range CB800000 - D4FFBFFF ConvertPages: failed to find range D5000000 - DEBFBFFF ConvertPages: failed to find range DEC00000 - E87FBFFF ConvertPages: failed to find range E8800000 - F23FBFFF ConvertPages: failed to find range F2400000 - FB7FBFFF ConvertPages: failed to find range FD000000 - FDFFFFFF ConvertPages: failed to find range FE000000 - FE00FFFF ConvertPages: failed to find range FE010000 - FE7FFFFF ConvertPages: failed to find range FEC00000 - FEC00FFF ConvertPages: failed to find range FEC80000 - FED00FFF ConvertPages: failed to find range 200000000000 - 29FFFFFFFFFF 36%: System Security Initialization SMBIOS Package[0] - Processor[0] SMBIOS Package[1] - Processor[56] CPU[000]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 CPU[056]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 No PMems, Crystal Ridge Drvier is not going to be loaded. [IIO](TH) Trace Hub requested memory Size is 0. Not allocating memory. [IIO](TH) PCH Trace Hub not accessible. Disabled. [IIO](TH) ERROR Failed to configure PCH Trace Hub. Status= Not Ready ERROR: IioTraceHubInitialize failed. Status= Not Ready [IIO](SPK) IioSpkSocketInitialize: SocketId: 0 [IIO](SPK) IioSpkSocketInitialize: SocketId: 1 39%: iLO Embedded Health Initialization Run PPM in DXE 43%: ACPI Table Initialization TXT is disabled MeasurementTmeState() retrun error: Not Found MeasurementMktmeState() retrun error: Not Found Measurment MSR: MRTEATVT return error Not Found Measurment MSR: MRTECPBLT return error Not Found Measurment MSR: MRTEECUEBS return error Not Found Measurment MSR: MRTEECUEMS return error Not Found Measurement failed for one or more MSRs. retrun error: Not Found Warning: SGX is disabled on this system. [SGX] SgxDisabled_SgxLateInit: Success [SGX] SgxErrorCode = 0x0 Can not load NvDimmFwUpdateDriverEntryPoint : Type 1 NVDIMM support unavailable 46%: BIOS Configuration Initialization RbsuSetupDxeEntry, failed to initial product lines feature: Unsupported CheckDebugCertificateStatus: unpack error. 53%: Early PCI Initialization - Start PciRootBridgeEnumeratorPciDeviceTable: PCI-PCI Bridge found but not in PCI Device Table, Bus=0 PciRootBridgeEnumeratorPciDeviceTable: Continuing in ~8 sec. PchUplink programming error! Can not find the Uplink x16 port. [IE_HECI-0] Resetting HECI interface (CSR 80848408/80272709) 61%: Early PCI Initialization - Complete 71%: Switching console output to Primary Video. Please wait... :INIT - BIOS_RESET_CPL: Set CPL3 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL3 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** [SGX] SgxAfterPlatformLocksCallback entry BiosParamInfo TopologyInfo CpuSvn is 0 [SGX] UpdateRegistrationPackageInfo BEGIN [SGX] UpdateRegistrationPackageInfo END ExposeAllScenariosSgxRegistrationUefiVariables Enter Expose variable [SgxRegistrationConfiguration]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 RegistrationRequestType 0 Expose variable [SgxRegistrationServerRequest]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 1 Expose variable [SgxRegistrationPackageInfo]: SetVariable: Success ExposeToOsRuntime: 0 ReadOnlyOsRuntime: 0 Expose variable [SgxRegistrationStatus]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 Success to expose Registration Variables, exiting... [SGX] SgxAfterPlatformLocksCallback exit: success (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP HPE ProLiant DL360 Gen10 Plus System ROM Version: U46 v1.58 (01/13/2022) Serial Number: CZ22080FY9 Installed System Memory: 512 GB, Available System Memory: 512 GB 2 Processor(s) detected, 56 total cores enabled, Hyperthreading is enabled Proc 1: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz Proc 2: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz UPI Speed: 11.2 GT/s Workload Profile: Virtualization - Max Performance Power Regulator Mode: Static High Performance Advanced Memory Protection Mode: Fast Fault Tolerant Memory (ADDDC) RAS Mode: Firmware First Boot Mode: UEFI (Secure Boot) HPE Memory authenticated in all populated DIMM slots. ERROR: C80000002:V801000DD I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A5320 BuildDiskDriveTable: Cannot find more legal ports for SATA drive. Done! IsDevSmartArrayCtrl: AIP GetInformation for gEfiHpSmartArrayFeatures failed! Status = Unsupported HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) PopulateAndCreateDimmCurrentConfigRecords: Unable to retrieve size of InterleaveSets variable, Status = Not Found Embedded : iLO 5 embedded health Device - Repair Required Embedded : iLO 5 embedded health Device - Repair Required System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. ERROR: C80000002:V801000A6 I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. F1 pressed continue to boot in 19 seconds... T_TEST: Build ATSR SocketIndex=0. IIO_resource.valid=1. 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 T_TEST: Build ATSR SocketIndex=1. IIO_resource.valid=1.le or errors detected ReportDmar: Could not find RAC buffer or buffer size is 0! Status = Success HeciIeSetPowerRegulatorSetting: IEPS_CMD_SET_POWER_REGULATOR_REQ FAILURE(ResponseCode: 0x78) TPM Location configured (expected values: dTPM = 0x5 = 0x5 Value at TPM Base Address (0xFED40000) = 0xA1 HierarchyChangeAuth: Response Code error! 0x000009A2 Starting all devices for entering Boot Menu. Please wait...... BootMenuEntryCallback: Qid 0x801C to BootOption 0x14 RHEL CoreOS (Live) Use the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt. esetparams 'RHEL CoreOS (Live)' linux /images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044\ -0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 initrd /images/pxeboot/initrd.img /images/ignition.img Press Ctrl-x to start, Ctrl-c for a command prompt or Escape to discard edits and return to the menu. Pressing Tab lists possible completions. error: ../../grub-core/script/function.c:119:can't find command `esetparams'. Secure Start verification in progress. This may take a few seconds... Recommended Terminal Window Size = 100x31 ========================================= HPE ProLiant System BIOS U46 v1.58 (01/13/2022) (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP Early system initialization, please wait... iLO 5 IPv4: iLO 5 IPv6: iLO 5 IPv4: 10.8.247.46 iLO 5 IPv6: FE80::5EBA:2CFF:FE43:832A Fail to process new found FV, FV may be corrupted! ERROR: Internal fabric error detected!! PSF PID:0xBA, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0xBC, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF InstallHeciTransportPpis, start InstallHeciTransportPpis, end [HECI CONTROL PEI] HECI Transport found: 2 [HECI] [ME] (MeType is ME_TYPE_SPS) Initialization is allowed Initialization is not allowed Initialization is not allowed 2%: System Chipset Initialization Couldn't read Flash Security Override [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) Error: Update PEI FuSa (SAF) policy! Status: Not Found LtStatusRegister[0xFED30000] = 0x0000000000004092 LtExtendedStatusError[0xFED30008] = 0x0000000000000000 BootGuardBootStatus[0xFED300A0] = 0x9D54000080002000 BootGuardAcmError[0xFED30328] = 0x00000000C0008000 MSR_BOOT_GUARD_SACM_INFO[0x0000013A] = 0x0000000F0000007D Platform Type = 10 [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) MeUmaConfigureRequestedSegmentSize: Exiting (Status = Success) 4%: UPI Link Initialization - Start [IIO](UBA) [0.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p01] 0 | 1 | 1 | 0 | 0x00 | 0 [IIO](UBA) [0 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p05] 0 | 1 | 2 | 0 | 0x00 | 0 [IIO](UBA) [0 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.4] Bifurcation = 3 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p13] 0 | 1 | 255 | 0 | 0x00 | 0 [IIO](UBA) [0 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p15] 0 | 1 | 10 | 0 | 0x00 | 0 [IIO](UBA) [0 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p17] 0 | 1 | 13 | 1 | 0x00 | 0 [IIO](UBA) [0 p18] 0 | 1 | 14 | 1 | 0x00 | 0 [IIO](UBA) [0 p19] 0 | 1 | 15 | 1 | 0x00 | 0 [IIO](UBA) [0 p20] 0 | 1 | 16 | 1 | 0x00 | 0 [IIO](UBA) [1.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p01] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p05] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.4] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p13] 0 | 1 | 3 | 0 | 0x00 | 0 [IIO](UBA) [1 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p15] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p17] 0 | 1 | 29 | 1 | 0x00 | 0 [IIO](UBA) [1 p18] 0 | 1 | 30 | 1 | 0x00 | 0 [IIO](UBA) [1 p19] 0 | 1 | 31 | 1 | 0x00 | 0 [IIO](UBA) [1 p20] 0 | 1 | 32 | 1 | 0x00 | 0 BuildCpuTopologyInfoHob: Failed to Build Cpu Info Hob 5%: UPI Link Initialization - Complete [IIO](VMD) [0] VMD disabled for RPs init. PCH Detect: MMIO base on Socket 1, is 0, skipping! WARNING: Platform does not support uplink port! [IIO](VMD) [1] VMD disabled for RPs init. 7%: Early Processor Initialization PrevBootErrors: No Memory MCA Error Found PrevBootErrors - Valid MCA UC entries: 0 9%: Memory Initialization - Start C00: REFRESH_SYNC_TIME_PerCh= 7800 C00: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C00: HostRefreshStartTime= 7800 C00: HostRefreshStartTime= 7800 C01: HostRefreshStartTime= 7807 C01: HostRefreshStartTime= 7800 C02: HostRefreshStartTime= 7809 C02: HostRefreshStartTime= 7807 C03: HostRefreshStartTime= 7793 C03: HostRefreshStartTime= 7801 C04: HostRefreshStartTime= 7703 C04: HostRefreshStartTime= 7708 C05: HostRefreshStartTime= 7800 C05: HostRefreshStartTime= 7791 C06: HostRefreshStartTime= 7789 C06: HostRefreshStartTime= 7795 C07: HostRefreshStartTime= 7790 C07: HostRefreshStartTime= 7790 EnableHostRefresh Start Write Time diff[1]=131 ns EnableHostRefresh Start Write Time diff[1]=134 ns EnableHostRefresh Start Write Time diff[2]=256 ns EnableHostRefresh Start Write Time diff[2]=221 ns EnableHostRefresh Start Write Time diff[3]=299 ns EnableHostRefresh Start Write Time diff[3]=229 ns EnableHostRefresh Start Write Time diff[4]=176 ns EnableHostRefresh Start Write Time diff[4]=234 ns EnableHostRefresh Start Write Time diff[5]=271 ns EnableHostRefresh Start Write Time diff[5]=254 ns EnableHostRefresh Start Write Time diff[6]=255 ns EnableHostRefresh Start Write Time diff[6]=225 ns EnableHostRefresh Start Write Time diff[7]=274 ns EnableHostRefresh Start Write Time diff[7]=230 ns PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found [IIO](VMD) VMD init registered on endOfPei. WARNING: 00:46:04.0: Device 1077-8070 link width trained below capability WARNING: (RPLINKCAP 0x0F7A4084, RPLINKSTS 0x00003043) WARNING: (EPLINKCAP 0x0045F083, EPLINKSTS 0x00001043) PeiMemoryBaseAddress: 0x000000000E66E000. 18%: Memory Initialization - Complete ME UMA PostMem: SendDramInitDone (): InitStat = 0 ME UMA PostMem: BiosAction = 7 ME UMA PostMem: MeDramInitDone Complete. Checking for reset... Initialization is not allowed Platform Type = 10 Fail to process new found FV, FV may be corrupted! Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 TPM Measurement - Start TPM Measurement - Complete LocatePpi status = Success [SmbusErrataFix.c] Execute EfiSmbusSendByte (0xE2) mdatabyte = 4, Status = Device Error Install SgxInit Ppi : 0 Error: SgxRegistrationStatus report error code: 0x15 SGX disabled, exiting [IIO](TH) PCH Trace Hub not accessible [IPMI] mIpmiInstance->KcsTimeoutPeriod: 0x186A0 [IPMI] BMC Device ID: 0x13, firmware version: 2.60 UpdateMode:0 IPMI Dxe:Get BMC Device Id 21%: SMBIOS Table Initialization No ME Policy Protocol availableNo ME Policy Protocol availableUsbPortXhci Dxe driver:PlatformType=10 ConvertPages: failed to find range 94000000 - 97FFFFFF AllocateManagementDeviceBarSpace: SetMemorySpaceAttributes for Flash Device region failed! Status = 00000002 25%: USB Controller Initialization 28%: Chipset Root Ports Initialization 32%: HPE Memory Initialization HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr AE. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A0. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A2. ConvertPages: failed to find range 70000000 - 77BFFFFF HpTranslateTlsCipherList (715): Input / output data is null or input data size is invalid [OtaDxe.c] OtaDxeDriverEntry() { [OtaDxe.c] OtaDxeDriverEntry() -> Create OTA Event [OtaDxe.c] OtaDxeDriverEntry() -> OTA Event creation: Success [OtaDxe.c] OtaDxeDriverEntry() } Success [OtaShellCommands.c] OtaShellCommandsEntry() { [OtaShellCommands.c] OtaShellCommandsEntry() -> Init OTA Shell Commands Table [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaShell -> Success [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaConfig -> Success [OtaShellCommands.c] OtaShellCommandsEntry() } Success Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 ConvertPages: failed to find range F0000 - FFFFF ConvertPages: failed to find range 6F800000 - 6FFFFFFF ConvertPages: failed to find range 70000000 - 77BFFFFF ConvertPages: failed to find range 77C00000 - 7FFFFFFF ConvertPages: failed to find range 80000000 - 8FFFFFFF ConvertPages: failed to find range 90000000 - 93FFFFFF ConvertPages: failed to find range 94000000 - 97FFFFFF ConvertPages: failed to find range 98000000 - 99C0FFFF ConvertPages: failed to find range 99C10000 - A47FBFFF ConvertPages: failed to find range A4800000 - AE3FBFFF ConvertPages: failed to find range AE400000 - B7FFBFFF ConvertPages: failed to find range B8000000 - C1BFBFFF ConvertPages: failed to find range C1C00000 - CAFFBFFF ConvertPages: failed to find range CB800000 - D4FFBFFF ConvertPages: failed to find range D5000000 - DEBFBFFF ConvertPages: failed to find range DEC00000 - E87FBFFF ConvertPages: failed to find range E8800000 - F23FBFFF ConvertPages: failed to find range F2400000 - FB7FBFFF ConvertPages: failed to find range FD000000 - FDFFFFFF ConvertPages: failed to find range FE000000 - FE00FFFF ConvertPages: failed to find range FE010000 - FE7FFFFF ConvertPages: failed to find range FEC00000 - FEC00FFF ConvertPages: failed to find range FEC80000 - FED00FFF ConvertPages: failed to find range 200000000000 - 29FFFFFFFFFF 36%: System Security Initialization SMBIOS Package[0] - Processor[0] SMBIOS Package[1] - Processor[56] CPU[000]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 CPU[056]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 No PMems, Crystal Ridge Drvier is not going to be loaded. [IIO](TH) Trace Hub requested memory Size is 0. Not allocating memory. [IIO](TH) PCH Trace Hub not accessible. Disabled. [IIO](TH) ERROR Failed to configure PCH Trace Hub. Status= Not Ready ERROR: IioTraceHubInitialize failed. Status= Not Ready [IIO](SPK) IioSpkSocketInitialize: SocketId: 0 [IIO](SPK) IioSpkSocketInitialize: SocketId: 1 39%: iLO Embedded Health Initialization Run PPM in DXE 43%: ACPI Table Initialization TXT is disabled MeasurementTmeState() retrun error: Not Found MeasurementMktmeState() retrun error: Not Found Measurment MSR: MRTEATVT return error Not Found Measurment MSR: MRTECPBLT return error Not Found Measurment MSR: MRTEECUEBS return error Not Found Measurment MSR: MRTEECUEMS return error Not Found Measurement failed for one or more MSRs. retrun error: Not Found Warning: SGX is disabled on this system. [SGX] SgxDisabled_SgxLateInit: Success [SGX] SgxErrorCode = 0x0 Can not load NvDimmFwUpdateDriverEntryPoint : Type 1 NVDIMM support unavailable 46%: BIOS Configuration Initialization RbsuSetupDxeEntry, failed to initial product lines feature: Unsupported CheckDebugCertificateStatus: unpack error. 53%: Early PCI Initialization - Start PciRootBridgeEnumeratorPciDeviceTable: PCI-PCI Bridge found but not in PCI Device Table, Bus=0 PciRootBridgeEnumeratorPciDeviceTable: Continuing in ~8 sec. PchUplink programming error! Can not find the Uplink x16 port. [IE_HECI-0] Resetting HECI interface (CSR 80848408/80272709) 61%: Early PCI Initialization - Complete 71%: Switching console output to Primary Video. Please wait... :INIT - BIOS_RESET_CPL: Set CPL3 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL3 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** [SGX] SgxAfterPlatformLocksCallback entry BiosParamInfo TopologyInfo CpuSvn is 0 [SGX] UpdateRegistrationPackageInfo BEGIN [SGX] UpdateRegistrationPackageInfo END ExposeAllScenariosSgxRegistrationUefiVariables Enter Expose variable [SgxRegistrationConfiguration]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 RegistrationRequestType 0 Expose variable [SgxRegistrationServerRequest]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 1 Expose variable [SgxRegistrationPackageInfo]: SetVariable: Success ExposeToOsRuntime: 0 ReadOnlyOsRuntime: 0 Expose variable [SgxRegistrationStatus]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 Success to expose Registration Variables, exiting... [SGX] SgxAfterPlatformLocksCallback exit: success (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP HPE ProLiant DL360 Gen10 Plus System ROM Version: U46 v1.58 (01/13/2022) Serial Number: CZ22080FY9 Installed System Memory: 512 GB, Available System Memory: 512 GB 2 Processor(s) detected, 56 total cores enabled, Hyperthreading is enabled Proc 1: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz Proc 2: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz UPI Speed: 11.2 GT/s Workload Profile: Virtualization - Max Performance Power Regulator Mode: Static High Performance Advanced Memory Protection Mode: Fast Fault Tolerant Memory (ADDDC) RAS Mode: Firmware First Boot Mode: UEFI (Secure Boot) HPE Memory authenticated in all populated DIMM slots. ERROR: C80000002:V801000DD I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A5320 BuildDiskDriveTable: Cannot find more legal ports for SATA drive. Done! IsDevSmartArrayCtrl: AIP GetInformation for gEfiHpSmartArrayFeatures failed! Status = Unsupported HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) PopulateAndCreateDimmCurrentConfigRecords: Unable to retrieve size of InterleaveSets variable, Status = Not Found Embedded : iLO 5 embedded health Device - Repair Required Embedded : iLO 5 embedded health Device - Repair Required System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. ERROR: C80000002:V801000A6 I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. System wiF1 pressed to boot in 16 seconds... T_TEST: Build ATSR SocketIndex=0.... IIO_resource.valid=1. 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 T_TEST: Build ATSR SocketIndex=1. IIO_resource.valid=1.le or errors detected ReportDmar: Could not find RAC buffer or buffer size is 0! Status = Success HeciIeSetPowerRegulatorSetting: IEPS_CMD_SET_POWER_REGULATOR_REQ FAILURE(ResponseCode: 0x78) TPM Location configured (expected values: dTPM = 0x5 = 0x5 Value at TPM Base Address (0xFED40000) = 0xA1 HierarchyChangeAuth: Response Code error! 0x000009A2 Starting all devices for entering Boot Menu. Please wait...... BootMenuEntryCallback: Qid 0x801C to BootOption 0x14 RHEL CoreOS (Live) Use the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt. setparams 'RHEL CoreOS (Live)' linux /images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044\ -0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 initrd /images/pxeboot/initrd.img /images/ignition.img Press Ctrl-x to start, Ctrl-c for a command prompt or Escape to discard edits and return to the menu. Pressing Tab lists possible completions. EFI stub: UEFI Secure Boot is enabled. [ 0.000000] microcode: microcode updated early to revision 0xd000363, date = 2022-03-30 [ 0.000000] Linux version 4.18.0-305.62.1.el8_4.x86_64 (mockbuild@x86-vm-07.build.eng.bos.redhat.com) (gcc version 8.4.1 20200928 (Red Hat 8.4.1-1) (GCC)) #1 SMP Thu Aug 11 12:07:27 EDT 2022 [ 0.000000] Command line: BOOT_IMAGE=/images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044-0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 [ 0.000000] x86/split lock detection: disabled [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 [ 0.000000] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 [ 0.000000] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 [ 0.000000] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 [ 0.000000] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000093fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000094000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ece2fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ece3000-0x000000003ece3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003ece4000-0x000000003ece4fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ece5000-0x000000003ece6fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003ece7000-0x0000000053c6bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000053c6c000-0x0000000053c9bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000053c9c000-0x00000000558ebfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000558ec000-0x000000005846cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000005846d000-0x00000000584fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000584fe000-0x00000000595fdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000595fe000-0x0000000059804fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000059805000-0x0000000059885fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000059886000-0x000000006f7fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000006f800000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000098000000-0x0000000099c0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000807fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x0000000000093fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000094000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003ece2fff] usable [ 0.000000] reserve setup_data: [mem 0x000000003ece3000-0x000000003ece3fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000003ece4000-0x000000003ece4fff] usable [ 0.000000] reserve setup_data: [mem 0x000000003ece5000-0x000000003ece6fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000003ece7000-0x00000000504fa017] usable [ 0.000000] reserve setup_data: [mem 0x00000000504fa018-0x000000005056b857] usable [ 0.000000] reserve setup_data: [mem 0x000000005056b858-0x000000005056c017] usable [ 0.000000] reserve setup_data: [mem 0x000000005056c018-0x00000000505dd857] usable [ 0.000000] reserve setup_data: [mem 0x00000000505dd858-0x00000000505de017] usable [ 0.000000] reserve setup_data: [mem 0x00000000505de018-0x000000005060d057] usable [ 0.000000] reserve setup_data: [mem 0x000000005060d058-0x000000005060e017] usable [ 0.000000] reserve setup_data: [mem 0x000000005060e018-0x0000000050619257] usable [ 0.000000] reserve setup_data: [mem 0x0000000050619258-0x000000005061a017] usable [ 0.000000] reserve setup_data: [mem 0x000000005061a018-0x0000000050622057] usable [ 0.000000] reserve setup_data: [mem 0x0000000050622058-0x0000000053c6bfff] usable [ 0.000000] reserve setup_data: [mem 0x0000000053c6c000-0x0000000053c9bfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x0000000053c9c000-0x00000000558ebfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000558ec000-0x000000005846cfff] usable [ 0.000000] reserve setup_data: [mem 0x000000005846d000-0x00000000584fdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000584fe000-0x00000000595fdfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000595fe000-0x0000000059804fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000059805000-0x0000000059885fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000059886000-0x000000006f7fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000006f800000-0x000000008fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000098000000-0x0000000099c0ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000807fffffff] usable [ 0.000000] efi: EFI v2.70 by HPE [ 0.000000] efi: SMBIOS=0x540a8000 SMBIOS 3.0=0x540a6000 ACPI=0x53c9b000 ACPI 2.0=0x53c9b014 TPMFinalLog=0x5855d000 MEMATTR=0x3c31c018 MOKvar=0x540a5000 TPMEventLog=0x50623018 [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7 [ 0.000000] SMBIOS 3.4.0 present. [ 0.000000] DMI: HPE ProLiant DL360 Gen10 Plus/ProLiant DL360 Gen10 Plus, BIOS U46 01/13/2022 [ 0.000000] tsc: Detected 2200.000 MHz processor [ 0.000000] last_pfn = 0x8080000 max_arch_pfn = 0x10000000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 1046512M [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 10 lose cover RAM: 983056M [ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 512M num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 2G num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 10 lose cover RAM: 917552M [ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 10 lose cover RAM: 786544M [ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 10 lose cover RAM: 112M [ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 10 lose cover RAM: 112M [ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 10 lose cover RAM: 112M [ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 10 lose cover RAM: 112M [ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 10 lose cover RAM: 524528M [ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 10 lose cover RAM: 240M [ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 10 lose cover RAM: 240M [ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 10 lose cover RAM: 240M [ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 10 lose cover RAM: 496M [ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 10 lose cover RAM: 496M [ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 10 lose cover RAM: 496M [ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 9 lose cover RAM: 1008M [ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 9 lose cover RAM: 1008M [ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 8 lose cover RAM: 2032M [ 0.000000] mtrr_cleanup: can not find optimal value [ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size [ 0.000000] x2apic: enabled by BIOS, switching to x2apic ops [ 0.000000] last_pfn = 0x6f800 max_arch_pfn = 0x10000000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] RAMDISK: [mem 0x22828000-0x27f82fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000053C9B014 000024 (v02 HPE ) [ 0.000000] ACPI: XSDT 0x0000000053C84188 000124 (v01 HPE Server 00000001 01000013) [ 0.000000] ACPI: FACP 0x0000000053C8E000 00010C (v06 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: DSDT 0x0000000053C74000 00B195 (v02 HPE Server 00000002 HPE 00020000) [ 0.000000] ACPI: FACS 0x000000005855B000 000040 [ 0.000000] ACPI: SSDT 0x0000000053C99000 000C0A (v02 HPE ADDRXLAT 00000001 INTL 20181003) [ 0.000000] ACPI: ERST 0x0000000053C98000 000250 (v01 HPE Server 00000001 INTL 00000001) [ 0.000000] ACPI: MCEJ 0x0000000053C97000 000130 (v01 HPE Server 00000001 INTL 0100000D) [ 0.000000] ACPI: BERT 0x0000000053C96000 000030 (v01 HPE Server 00000001 INTL 00000001) [ 0.000000] ACPI: PMTT 0x0000000053C94000 000908 (v02 HPE Server 00000001 INTL 20091013) [ 0.000000] ACPI: SSDT 0x0000000053C93000 000562 (v01 HPE SgxSsdt 00000001 INTL 20181003) [ 0.000000] ACPI: HEST 0x0000000053C92000 00017C (v01 HPE Server 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 0x0000000053C91000 000170 (v01 HPE Server 00000001 INTL 00000001) [ 0.000000] ACPI: SSDT 0x0000000053C90000 00061B (v02 HPE Tpm2Tabl 00001000 INTL 20181003) [ 0.000000] ACPI: TPM2 0x0000000053C8F000 00004C (v04 HPE Server 00000002 01000013) [ 0.000000] ACPI: SSDT 0x0000000053C95000 00003A (v02 HPE PLATOPRG 00000001 INTL 20181003) [ 0.000000] ACPI: HPET 0x0000000053C8D000 000038 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: WDDT 0x0000000053C8C000 000040 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: APIC 0x0000000053C8B000 000C8C (v05 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: MCFG 0x0000000053C8A000 00003C (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SLIT 0x0000000053C89000 00003C (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SRAT 0x0000000053C88000 000B78 (v03 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: HMAT 0x0000000053C87000 000188 (v02 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SPMI 0x0000000053C86000 000041 (v05 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SPCR 0x0000000053C85000 000050 (v02 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: MSCT 0x0000000053C9A000 000090 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: BDAT 0x0000000053C83000 000030 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: WSMT 0x0000000053C82000 000028 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: PCCT 0x0000000053C81000 000030 (v02 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: DMAR 0x0000000053C80000 000280 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SSDT 0x0000000053C6E000 0050DC (v02 HPE PCISSDT 00000002 HPE 00020000) [ 0.000000] ACPI: SSDT 0x0000000053C6D000 0001C9 (v02 HPE TIMESSDT 00000002 HPE 00020000) [ 0.000000] ACPI: SSDT 0x0000000053C6C000 000302 (v01 HPE pmab 00000001 1590 20181003) [ 0.000000] ACPI: OEM1 0x000000003ECE6000 000430 (v02 HPE CPU CPC 00000002 HPE 00020000) [ 0.000000] ACPI: BGRT 0x000000003ECE5000 000038 (v01 HPE Server 00000002 1590 01000013) [ 0.000000] ACPI: FPDT 0x000000003ECE3000 000034 (v01 HPE Server 00000002 01000013) [ 0.000000] Setting APIC routing to cluster x2apic. [ 0.000000] SRAT: PXM 0 -> APIC 0x0000 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0002 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0004 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0006 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0008 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000a -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000c -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000e -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0010 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0012 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0014 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0016 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0018 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x001a -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x001c -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x001e -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0020 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0022 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0024 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0026 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0028 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002a -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002c -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002e -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0030 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0032 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0034 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0036 -> Node 1 [ 0.000000] SRAT: PXM 2 -> APIC 0x0080 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0082 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0084 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0086 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0088 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008a -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008c -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008e -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0090 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0092 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0094 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0096 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0098 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x009a -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 0x009c -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x009e -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a0 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a2 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a4 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a6 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a8 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00aa -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00ac -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00ae -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b0 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b2 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b4 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b6 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 0x0001 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0003 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0005 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0007 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0009 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000b -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000d -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000f -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0011 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0013 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0015 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0017 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0019 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x001b -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x001d -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x001f -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0021 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0023 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0025 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0027 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0029 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002b -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002d -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002f -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0031 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0033 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0035 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0037 -> Node 1 [ 0.000000] SRAT: PXM 2 -> APIC 0x0081 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0083 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0085 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0087 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0089 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008b -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008d -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008f -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0091 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0093 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0095 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0097 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0099 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x009b -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 0x009d -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x009f -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a1 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a3 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a5 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a7 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a9 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00ab -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00ad -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00af -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b1 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b3 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b5 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b7 -> Node 3 [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x207fffffff] [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x2080000000-0x407fffffff] [ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x4080000000-0x607fffffff] [ 0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x6080000000-0x807fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x207fffffff] -> [mem 0x00000000-0x207fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x207ffd6000-0x207fffffff] [ 0.000000] NODE_DATA(1) allocated [mem 0x407ffd6000-0x407fffffff] [ 0.000000] NODE_DATA(2) allocated [mem 0x607ffd6000-0x607fffffff] [ 0.000000] NODE_DATA(3) allocated [mem 0x807ffd3000-0x807fffcfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000807fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008ffff] [ 0.000000] node 0: [mem 0x0000000000094000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ece2fff] [ 0.000000] node 0: [mem 0x000000003ece4000-0x000000003ece4fff] [ 0.000000] node 0: [mem 0x000000003ece7000-0x0000000053c6bfff] [ 0.000000] node 0: [mem 0x00000000558ec000-0x000000005846cfff] [ 0.000000] node 0: [mem 0x00000000595fe000-0x0000000059804fff] [ 0.000000] node 0: [mem 0x0000000059886000-0x000000006f7fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000207fffffff] [ 0.000000] node 1: [mem 0x0000002080000000-0x000000407fffffff] [ 0.000000] node 2: [mem 0x0000004080000000-0x000000607fffffff] [ 0.000000] node 3: [mem 0x0000006080000000-0x000000807fffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 14075 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000207fffffff] [ 0.000000] Initmem setup node 1 [mem 0x0000002080000000-0x000000407fffffff] [ 0.000000] Initmem setup node 2 [mem 0x0000004080000000-0x000000607fffffff] [ 0.000000] Initmem setup node 3 [mem 0x0000006080000000-0x000000807fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: X2APIC_NMI (uid[0x00] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x01] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x02] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x03] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x04] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x05] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x06] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x07] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x08] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x09] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x10] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x11] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x12] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x13] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x14] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x15] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x16] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x17] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x18] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x19] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x20] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x21] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x22] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x23] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x24] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x25] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x26] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x27] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x28] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x29] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x30] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x31] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x32] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x33] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x34] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x35] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x36] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x37] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x80] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x81] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x82] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x83] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x84] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x85] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x86] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x87] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x88] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x89] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x90] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x91] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x92] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x93] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x94] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x95] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x96] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x97] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x98] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x99] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa0] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa1] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa2] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa3] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa4] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa5] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa6] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa7] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa8] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa9] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xaa] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xab] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xac] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xad] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xae] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xaf] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb0] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb1] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb2] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb3] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb4] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb5] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb6] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb7] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] ACPI: SPCR: console: uart,mmio,0x0,115200 [ 0.000000] smpboot: Allowing 112 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x00093fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x3ecae000-0x3ecdefff] [ 0.000000] PM: Registered nosave memory: [mem 0x3ece3000-0x3ece3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x3ece5000-0x3ece6fff] [ 0.000000] PM: Registered nosave memory: [mem 0x504fa000-0x504fafff] [ 0.000000] PM: Registered nosave memory: [mem 0x5056b000-0x5056bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5056c000-0x5056cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x505dd000-0x505ddfff] [ 0.000000] PM: Registered nosave memory: [mem 0x505de000-0x505defff] [ 0.000000] PM: Registered nosave memory: [mem 0x5060d000-0x5060dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5060e000-0x5060efff] [ 0.000000] PM: Registered nosave memory: [mem 0x50619000-0x50619fff] [ 0.000000] PM: Registered nosave memory: [mem 0x5061a000-0x5061afff] [ 0.000000] PM: Registered nosave memory: [mem 0x50622000-0x50622fff] [ 0.000000] PM: Registered nosave memory: [mem 0x53c6c000-0x53c9bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x53c9c000-0x558ebfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5846d000-0x584fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x584fe000-0x595fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x59805000-0x59885fff] [ 0.000000] PM: Registered nosave memory: [mem 0x6f800000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x97ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x98000000-0x99c0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x99c10000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe00ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe010000-0xffffffff] [ 0.000000] [mem 0x99c10000-0xfdffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:112 nr_cpu_ids:112 nr_node_ids:4 [ 0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.000000] Built 4 zonelists, mobility grouping on. Total pages: 132042185 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044-0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 [ 0.000000] Specific versions of hardware are certified with Red Hat Enterprise Linux 8. Please see the list of hardware certified with Red Hat Enterprise Linux 8 at https://catalog.redhat.com. [ 0.000000] Memory: 1738000K/536552468K available (12293K kernel code, 2225K rwdata, 7716K rodata, 2480K init, 14040K bss, 9022344K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=112, Nodes=4 [ 0.000000] ftrace: allocating 38610 entries in 151 pages [ 0.000000] ftrace: allocated 151 pages with 5 groups [ 0.001000] rcu: Hierarchical RCU implementation. [ 0.001000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=112. [ 0.001000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.001000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=112 [ 0.001000] NR_IRQS: 524544, nr_irqs: 2952, preallocated irqs: 16 [ 0.001000] random: crng done (trusting CPU's manufacturer) [ 0.001000] Console: colour dummy device 80x25 [ 0.001000] printk: console [tty0] enabled [ 0.001000] printk: console [ttyS0] enabled [ 0.001000] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl [ 0.001000] ACPI: Core revision 20200925 [ 0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.001006] APIC: Switch to symmetric I/O mode setup [ 0.002004] DMAR: Host address width 46 [ 0.003003] DMAR: DRHD base: 0x000000d4ffc000 flags: 0x0 [ 0.004008] DMAR: dmar0: reg_base_addr d4ffc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.005003] DMAR: DRHD base: 0x000000debfc000 flags: 0x0 [ 0.006006] DMAR: dmar1: reg_base_addr debfc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.007003] DMAR: DRHD base: 0x000000e87fc000 flags: 0x0 [ 0.008005] DMAR: dmar2: reg_base_addr e87fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.009003] DMAR: DRHD base: 0x000000f23fc000 flags: 0x0 [ 0.010005] DMAR: dmar3: reg_base_addr f23fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.011003] DMAR: DRHD base: 0x000000fb7fc000 flags: 0x0 [ 0.012005] DMAR: dmar4: reg_base_addr fb7fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.013003] DMAR: DRHD base: 0x000000ae3fc000 flags: 0x0 [ 0.014005] DMAR: dmar5: reg_base_addr ae3fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.015003] DMAR: DRHD base: 0x000000b7ffc000 flags: 0x0 [ 0.016005] DMAR: dmar6: reg_base_addr b7ffc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.017003] DMAR: DRHD base: 0x000000c1bfc000 flags: 0x0 [ 0.018006] DMAR: dmar7: reg_base_addr c1bfc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.019003] DMAR: DRHD base: 0x000000caffc000 flags: 0x0 [ 0.020005] DMAR: dmar8: reg_base_addr caffc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.021003] DMAR: DRHD base: 0x000000a47fc000 flags: 0x1 [ 0.022005] DMAR: dmar9: reg_base_addr a47fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.023003] DMAR: RMRR base: 0x0000005846e000 end: 0x00000058470fff [ 0.024003] DMAR: RMRR base: 0x000000584be000 end: 0x000000584befff [ 0.025003] DMAR: ATSR flags: 0x0 [ 0.026003] DMAR: ATSR flags: 0x0 [ 0.027004] DMAR-IR: IOAPIC id 8 under DRHD base 0xa47fc000 IOMMU 9 [ 0.028003] DMAR-IR: HPET id 0 under DRHD base 0xa47fc000 [ 0.029003] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.033067] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.036734] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.041004] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.042003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.00 BogoMIPS (lpj=2200000) [ 0.043001] pid_max: default: 114688 minimum: 896 [ 0.056884] Security Framework initialized [ 0.057001] Yama: becoming mindful. [ 0.058004] SELinux: Initializing. [ 0.081243] Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes) [ 0.093161] Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.094400] Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.095334] Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.096687] x86/cpu: SGX disabled by BIOS [ 0.097004] x86/tme: not enabled by BIOS [ 0.098003] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.099000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.100006] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.102061] CPU0: Thermal monitoring enabled (TM1) [ 0.104052] process: using mwait in idle threads [ 0.105002] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.106000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.107003] FEATURE SPEC_CTRL Present [ 0.108000] FEATURE IBPB_SUPPORT Present [ 0.109001] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.110001] Spectre V2 : Mitigation: Enhanced IBRS [ 0.111000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.112002] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.113001] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.114415] Freeing SMP alternatives memory: 32K [ 0.117163] smpboot: CPU0: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz (family: 0x6, model: 0x6a, stepping: 0x6) [ 0.118199] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.119001] ... version: 5 [ 0.120000] ... bit width: 48 [ 0.121000] ... generic registers: 8 [ 0.122001] ... value mask: 0000ffffffffffff [ 0.123000] ... max period: 00007fffffffffff [ 0.124000] ... fixed-purpose events: 4 [ 0.125000] ... event mask: 0001000f000000ff [ 0.126095] rcu: Hierarchical SRCU implementation. [ 0.135506] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.136018] smp: Bringing up secondary CPUs ... [ 0.137097] x86: Booting SMP configuration: [ 0.138002] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 [ 0.301002] .... node #1, CPUs: #14 [ 0.001000] ------------[ cut here ]------------ [ 0.001000] sched: CPU #14's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. [ 0.001000] WARNING: CPU: 14 PID: 0 at arch/x86/kernel/smpboot.c:435 topology_sane.isra.7+0x62/0x70 [ 0.001000] Modules linked in: [ 0.001000] CPU: 14 PID: 0 Comm: swapper/14 Not tainted 4.18.0-305.62.1.el8_4.x86_64 #1 [ 0.001000] Hardware name: HPE ProLiant DL360 Gen10 Plus/ProLiant DL360 Gen10 Plus, BIOS U46 01/13/2022 [ 0.001000] RIP: 0010:topology_sane.isra.7+0x62/0x70 [ 0.001000] Code: 0f 94 c0 c3 80 3d 8c cf 77 01 00 75 ef 89 f1 41 89 d9 89 fe 41 89 e8 48 c7 c7 e0 f5 2a 84 c6 05 72 cf 77 01 01 e8 c7 ae 08 00 <0f> 0b eb ce 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 53 48 [ 0.001000] RSP: 0000:ff6e5e804c5b3ec8 EFLAGS: 00010082 [ 0.001000] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8485f208 [ 0.001000] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046 [ 0.001000] RBP: 0000000000000001 R08: 00000000000002e5 R09: 0000000000000070 [ 0.001000] R10: 0000000000000000 R11: ff6e5e804c5b3d70 R12: 0000000000000000 [ 0.001000] R13: 000000000000f260 R14: 000000000000000e R15: 000000000000000e [ 0.001000] FS: 0000000000000000(0000) GS:ff3e520fff600000(0000) knlGS:0000000000000000 [ 0.001000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.001000] CR2: 0000000000000000 CR3: 000000297f010001 CR4: 0000000000771ee0 [ 0.001000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 0.001000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 0.001000] PKRU: 00000000 [ 0.001000] Call Trace: [ 0.001000] set_cpu_sibling_map+0x149/0x5b0 [ 0.001000] start_secondary+0x97/0x1e0 [ 0.001000] secondary_startup_64_no_verify+0xc2/0xcb [ 0.001000] ---[ end trace fbfbe61706c9bc5c ]--- [ 2.362125] #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 [ 2.527002] .... node #2, CPUs: #28 [ 0.001000] smpboot: CPU 28 Converting physical 0 to logical die 1 [ 2.761127] #29 #30 #31 #32 #33 #34 #35 #36 #37 #38 #39 #40 #41 [ 2.922002] .... node #3, CPUs: #42 #43 #44 #45 #46 #47 #48 #49 #50 #51 #52 #53 #54 #55 [ 3.098002] .... node #0, CPUs: #56 #57 #58 #59 #60 #61 #62 #63 #64 #65 #66 #67 #68 #69 [ 3.156001] .... node #1, CPUs: #70 #71 #72 #73 #74 #75 #76 #77 #78 #79 #80 #81 #82 #83 [ 3.216001] .... node #2, CPUs: #84 #85 #86 #87 #88 #89 #90 #91 #92 #93 #94 #95 #96 #97 [ 3.275002] .... node #3, CPUs: #98 #99 #100 #101 #102 #103 #104 #105 #106 #107 #108 #109 #110 #111 [ 3.334590] smp: Brought up 4 nodes, 112 CPUs [ 3.336001] smpboot: Max logical packages: 2 [ 3.337002] smpboot: Total of 112 processors activated (493133.08 BogoMIPS) [ 3.404103] node 0 deferred pages initialised in 63ms [ 3.419060] node 1 deferred pages initialised in 78ms [ 3.426059] node 2 deferred pages initialised in 85ms [ 3.434046] node 3 deferred pages initialised in 92ms [ 3.657062] devtmpfs: initialized [ 3.696060] x86/mm: Memory block size: 2048MB [ 3.750037] PM: Registering ACPI NVS region [mem 0x584fe000-0x595fdfff] (17825792 bytes) [ 3.848248] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 3.965077] futex hash table entries: 32768 (order: 9, 2097152 bytes) [ 4.042618] pinctrl core: initialized pinctrl subsystem [ 4.106286] NET: Registered protocol family 16 [ 4.159131] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 4.245015] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 4.339010] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 4.435024] audit: initializing netlink subsys (disabled) [ 4.499022] audit: type=2000 audit(1664546047.499:1): state=initialized audit_enabled=0 res=1 [ 4.602007] cpuidle: using governor menu [ 4.649005] Invalid PCCT: 0 PCC subspaces [ 4.697057] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 4.788008] ACPI: bus type PCI registered [ 4.836001] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 4.913131] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 5.025006] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 5.107013] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 5.232246] PCI: Using configuration type 1 for base access [ 5.299005] PCI: HP ProLiant DL360 detected, enabling pci=bfsort. [ 5.376028] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 5.456004] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 5.537154] cryptd: max_cpu_qlen set to 1000 [ 5.588315] fbcon: Taking over console [ 5.634021] ACPI: Added _OSI(Module Device) [ 5.684003] ACPI: Added _OSI(Processor Device) [ 5.737002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 5.793002] ACPI: Added _OSI(Processor Aggregator Device) [ 5.858004] ACPI: Added _OSI(Linux-Dell-Video) [ 5.911002] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 5.975002] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 6.040748] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 6.123541] ACPI: Interpreter enabled [ 6.167009] ACPI: (supports S0 S5) [ 6.208002] ACPI: Using IOAPIC for interrupt routing [ 6.267050] HEST: Table parsing has been initialized. [ 6.328003] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 6.437624] ACPI: Enabled 3 GPEs in block 00 to 7F [ 6.501261] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7e]) [ 6.572006] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 6.685029] PCI host bridge to bus 0000:7e [ 6.734003] pci_bus 0000:7e: root bus resource [bus 7e] [ 6.797018] pci 0000:7e:00.0: [8086:3450] type 00 class 0x088000 [ 6.869066] pci 0000:7e:00.1: [8086:3451] type 00 class 0x088000 [ 6.941053] pci 0000:7e:00.2: [8086:3452] type 00 class 0x088000 [ 7.013053] pci 0000:7e:00.3: [8086:0998] type 00 class 0x060000 [ 7.085054] pci 0000:7e:00.5: [8086:3455] type 00 class 0x088000 [ 7.157058] pci 0000:7e:02.0: [8086:3440] type 00 class 0x088000 [ 7.229109] pci 0000:7e:02.1: [8086:3441] type 00 class 0x088000 [ 7.301106] pci 0000:7e:02.2: [8086:3442] type 00 class 0x088000 [ 7.373107] pci 0000:7e:03.0: [8086:3440] type 00 class 0x088000 [ 7.446074] pci 0000:7e:03.1: [8086:3441] type 00 class 0x088000 [ 7.518072] pci 0000:7e:03.2: [8086:3442] type 00 class 0x088000 [ 7.590078] pci 0000:7e:04.0: [8086:3440] type 00 class 0x088000 [ 7.662115] pci 0000:7e:04.1: [8086:3441] type 00 class 0x088000 [ 7.734118] pci 0000:7e:04.2: [8086:3442] type 00 class 0x088000 [ 7.806113] pci 0000:7e:04.3: [8086:3443] type 00 class 0x088000 [ 7.878116] pci 0000:7e:05.0: [8086:3445] type 00 class 0x088000 [ 7.950107] pci 0000:7e:05.1: [8086:3446] type 00 class 0x088000 [ 8.022107] pci 0000:7e:05.2: [8086:3447] type 00 class 0x088000 [ 8.094108] pci 0000:7e:06.0: [8086:3445] type 00 class 0x088000 [ 8.167077] pci 0000:7e:06.1: [8086:3446] type 00 class 0x088000 [ 8.239074] pci 0000:7e:06.2: [8086:3447] type 00 class 0x088000 [ 8.311081] pci 0000:7e:07.0: [8086:3445] type 00 class 0x088000 [ 8.383114] pci 0000:7e:07.1: [8086:3446] type 00 class 0x088000 [ 8.455118] pci 0000:7e:07.2: [8086:3447] type 00 class 0x088000 [ 8.527118] pci 0000:7e:0b.0: [8086:3448] type 00 class 0x088000 [ 8.599061] pci 0000:7e:0b.1: [8086:3448] type 00 class 0x088000 [ 8.671061] pci 0000:7e:0b.2: [8086:344b] type 00 class 0x088000 [ 8.743069] pci 0000:7e:0c.0: [8086:344a] type 00 class 0x110100 [ 8.815086] pci 0000:7e:0d.0: [8086:344a] type 00 class 0x110100 [ 8.887079] pci 0000:7e:0e.0: [8086:344a] type 00 class 0x110100 [ 8.960139] pci 0000:7e:0f.0: [8086:344a] type 00 class 0x110100 [ 9.032157] pci 0000:7e:1a.0: [8086:2880] type 00 class 0x110100 [ 9.104081] pci 0000:7e:1b.0: [8086:2880] type 00 class 0x110100 [ 9.176078] pci 0000:7e:1c.0: [8086:2880] type 00 class 0x110100 [ 9.248150] pci 0000:7e:1d.0: [8086:2880] type 00 class 0x110100 [ 9.320177] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus 7f]) [ 9.391003] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 9.504023] PCI host bridge to bus 0000:7f [ 9.553002] pci_bus 0000:7f: root bus resource [bus 7f] [ 9.616011] pci 0000:7f:00.0: [8086:344c] type 00 class 0x088000 [ 9.688097] pci 0000:7f:00.1: [8086:344c] type 00 class 0x088000 [ 9.760097] pci 0000:7f:00.2: [8086:344c] type 00 class 0x088000 [ 9.832107] pci 0000:7f:00.3: [8086:344c] type 00 class 0x088000 [ 9.904105] pci 0000:7f:00.4: [8086:344c] type 00 class 0x088000 [ 9.976092] pci 0000:7f:00.5: [8086:344c] type 00 class 0x088000 [ 10.048112] pci 0000:7f:00.6: [8086:344c] type 00 class 0x088000 [ 10.120112] pci 0000:7f:00.7: [8086:344c] type 00 class 0x088000 [ 10.192079] pci 0000:7f:01.0: [8086:344c] type 00 class 0x088000 [ 10.264123] pci 0000:7f:01.1: [8086:344c] type 00 class 0x088000 [ 10.337126] pci 0000:7f:01.2: [8086:344c] type 00 class 0x088000 [ 10.409074] pci 0000:7f:01.3: [8086:344c] type 00 class 0x088000 [ 10.481127] pci 0000:7f:01.4: [8086:344c] type 00 class 0x088000 [ 10.553130] pci 0000:7f:01.5: [8086:344c] type 00 class 0x088000 [ 10.625134] pci 0000:7f:01.6: [8086:344c] type 00 class 0x088000 [ 10.697117] pci 0000:7f:01.7: [8086:344c] type 00 class 0x088000 [ 10.769122] pci 0000:7f:02.0: [8086:344c] type 00 class 0x088000 [ 10.841122] pci 0000:7f:02.1: [8086:344c] type 00 class 0x088000 [ 10.914130] pci 0000:7f:02.2: [8086:344c] type 00 class 0x088000 [ 10.986128] pci 0000:7f:02.3: [8086:344c] type 00 class 0x088000 [ 11.058128] pci 0000:7f:02.4: [8086:344c] type 00 class 0x088000 [ 11.130136] pci 0000:7f:02.5: [8086:344c] type 00 class 0x088000 [ 11.202135] pci 0000:7f:02.6: [8086:344c] type 00 class 0x088000 [ 11.274144] pci 0000:7f:02.7: [8086:344c] type 00 class 0x088000 [ 11.346143] pci 0000:7f:03.0: [8086:344c] type 00 class 0x088000 [ 11.419137] pci 0000:7f:03.1: [8086:344c] type 00 class 0x088000 [ 11.491140] pci 0000:7f:03.2: [8086:344c] type 00 class 0x088000 [ 11.563146] pci 0000:7f:03.3: [8086:344c] type 00 class 0x088000 [ 11.635151] pci 0000:7f:03.4: [8086:344c] type 00 class 0x088000 [ 11.707094] pci 0000:7f:03.5: [8086:344c] type 00 class 0x088000 [ 11.779112] pci 0000:7f:03.6: [8086:344c] type 00 class 0x088000 [ 11.851085] pci 0000:7f:03.7: [8086:344c] type 00 class 0x088000 [ 11.923116] pci 0000:7f:04.0: [8086:344c] type 00 class 0x088000 [ 11.996078] pci 0000:7f:04.1: [8086:344c] type 00 class 0x088000 [ 12.068125] pci 0000:7f:04.2: [8086:344c] type 00 class 0x088000 [ 12.140125] pci 0000:7f:04.3: [8086:344c] type 00 class 0x088000 [ 12.212125] pci 0000:7f:04.4: [8086:344c] type 00 class 0x088000 [ 12.284135] pci 0000:7f:04.5: [8086:344c] type 00 class 0x088000 [ 12.356133] pci 0000:7f:04.6: [8086:344c] type 00 class 0x088000 [ 12.428150] pci 0000:7f:04.7: [8086:344c] type 00 class 0x088000 [ 12.500145] pci 0000:7f:0a.0: [8086:344d] type 00 class 0x088000 [ 12.573093] pci 0000:7f:0a.1: [8086:344d] type 00 class 0x088000 [ 12.645095] pci 0000:7f:0a.2: [8086:344d] type 00 class 0x088000 [ 12.717109] pci 0000:7f:0a.3: [8086:344d] type 00 class 0x088000 [ 12.789107] pci 0000:7f:0a.4: [8086:344d] type 00 class 0x088000 [ 12.861092] pci 0000:7f:0a.5: [8086:344d] type 00 class 0x088000 [ 12.933112] pci 0000:7f:0a.6: [8086:344d] type 00 class 0x088000 [ 13.005114] pci 0000:7f:0a.7: [8086:344d] type 00 class 0x088000 [ 13.077080] pci 0000:7f:0b.0: [8086:344d] type 00 class 0x088000 [ 13.149123] pci 0000:7f:0b.1: [8086:344d] type 00 class 0x088000 [ 13.221118] pci 0000:7f:0b.2: [8086:344d] type 00 class 0x088000 [ 13.294073] pci 0000:7f:0b.3: [8086:344d] type 00 class 0x088000 [ 13.366130] pci 0000:7f:0b.4: [8086:344d] type 00 class 0x088000 [ 13.438131] pci 0000:7f:0b.5: [8086:344d] type 00 class 0x088000 [ 13.510133] pci 0000:7f:0b.6: [8086:344d] type 00 class 0x088000 [ 13.582118] pci 0000:7f:0b.7: [8086:344d] type 00 class 0x088000 [ 13.654115] pci 0000:7f:0c.0: [8086:344d] type 00 class 0x088000 [ 13.726124] pci 0000:7f:0c.1: [8086:344d] type 00 class 0x088000 [ 13.798134] pci 0000:7f:0c.2: [8086:344d] type 00 class 0x088000 [ 13.871126] pci 0000:7f:0c.3: [8086:344d] type 00 class 0x088000 [ 13.943131] pci 0000:7f:0c.4: [8086:344d] type 00 class 0x088000 [ 14.015136] pci 0000:7f:0c.5: [8086:344d] type 00 class 0x088000 [ 14.087134] pci 0000:7f:0c.6: [8086:344d] type 00 class 0x088000 [ 14.159145] pci 0000:7f:0c.7: [8086:344d] type 00 class 0x088000 [ 14.231142] pci 0000:7f:0d.0: [8086:344d] type 00 class 0x088000 [ 14.303140] pci 0000:7f:0d.1: [8086:344d] type 00 class 0x088000 [ 14.376141] pci 0000:7f:0d.2: [8086:344d] type 00 class 0x088000 [ 14.448144] pci 0000:7f:0d.3: [8086:344d] type 00 class 0x088000 [ 14.520154] pci 0000:7f:0d.4: [8086:344d] type 00 class 0x088000 [ 14.592092] pci 0000:7f:0d.5: [8086:344d] type 00 class 0x088000 [ 14.664110] pci 0000:7f:0d.6: [8086:344d] type 00 class 0x088000 [ 14.736088] pci 0000:7f:0d.7: [8086:344d] type 00 class 0x088000 [ 14.808117] pci 0000:7f:0e.0: [8086:344d] type 00 class 0x088000 [ 14.880079] pci 0000:7f:0e.1: [8086:344d] type 00 class 0x088000 [ 14.952126] pci 0000:7f:0e.2: [8086:344d] type 00 class 0x088000 [ 15.025126] pci 0000:7f:0e.3: [8086:344d] type 00 class 0x088000 [ 15.097125] pci 0000:7f:0e.4: [8086:344d] type 00 class 0x088000 [ 15.169130] pci 0000:7f:0e.5: [8086:344d] type 00 class 0x088000 [ 15.241134] pci 0000:7f:0e.6: [8086:344d] type 00 class 0x088000 [ 15.313150] pci 0000:7f:0e.7: [8086:344d] type 00 class 0x088000 [ 15.385153] pci 0000:7f:1d.0: [8086:344f] type 00 class 0x088000 [ 15.457105] pci 0000:7f:1d.1: [8086:3457] type 00 class 0x088000 [ 15.530107] pci 0000:7f:1e.0: [8086:3458] type 00 class 0x088000 [ 15.602061] pci 0000:7f:1e.1: [8086:3459] type 00 class 0x088000 [ 15.674060] pci 0000:7f:1e.2: [8086:345a] type 00 class 0x088000 [ 15.746062] pci 0000:7f:1e.3: [8086:345b] type 00 class 0x088000 [ 15.818064] pci 0000:7f:1e.4: [8086:345c] type 00 class 0x088000 [ 15.890059] pci 0000:7f:1e.5: [8086:345d] type 00 class 0x088000 [ 15.962061] pci 0000:7f:1e.6: [8086:345e] type 00 class 0x088000 [ 16.034059] pci 0000:7f:1e.7: [8086:345f] type 00 class 0x088000 [ 16.106103] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fe]) [ 16.177005] acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 16.290025] PCI host bridge to bus 0000:fe [ 16.339002] pci_bus 0000:fe: root bus resource [bus fe] [ 16.402007] pci 0000:fe:00.0: [8086:3450] type 00 class 0x088000 [ 16.474057] pci 0000:fe:00.1: [8086:3451] type 00 class 0x088000 [ 16.546059] pci 0000:fe:00.2: [8086:3452] type 00 class 0x088000 [ 16.618059] pci 0000:fe:00.3: [8086:0998] type 00 class 0x060000 [ 16.690059] pci 0000:fe:00.5: [8086:3455] type 00 class 0x088000 [ 16.762068] pci 0000:fe:02.0: [8086:3440] type 00 class 0x088000 [ 16.834115] pci 0000:fe:02.1: [8086:3441] type 00 class 0x088000 [ 16.906112] pci 0000:fe:02.2: [8086:3442] type 00 class 0x088000 [ 16.978111] pci 0000:fe:03.0: [8086:3440] type 00 class 0x088000 [ 17.050079] pci 0000:fe:03.1: [8086:3441] type 00 class 0x088000 [ 17.122078] pci 0000:fe:03.2: [8086:3442] type 00 class 0x088000 [ 17.194082] pci 0000:fe:04.0: [8086:3440] type 00 class 0x088000 [ 17.266123] pci 0000:fe:04.1: [8086:3441] type 00 class 0x088000 [ 17.339119] pci 0000:fe:04.2: [8086:3442] type 00 class 0x088000 [ 17.411126] pci 0000:fe:04.3: [8086:3443] type 00 class 0x088000 [ 17.483123] pci 0000:fe:05.0: [8086:3445] type 00 class 0x088000 [ 17.555114] pci 0000:fe:05.1: [8086:3446] type 00 class 0x088000 [ 17.627115] pci 0000:fe:05.2: [8086:3447] type 00 class 0x088000 [ 17.699116] pci 0000:fe:06.0: [8086:3445] type 00 class 0x088000 [ 17.771083] pci 0000:fe:06.1: [8086:3446] type 00 class 0x088000 [ 17.843081] pci 0000:fe:06.2: [8086:3447] type 00 class 0x088000 [ 17.915087] pci 0000:fe:07.0: [8086:3445] type 00 class 0x088000 [ 17.988120] pci 0000:fe:07.1: [8086:3446] type 00 class 0x088000 [ 18.060121] pci 0000:fe:07.2: [8086:3447] type 00 class 0x088000 [ 18.132120] pci 0000:fe:0b.0: [8086:3448] type 00 class 0x088000 [ 18.204064] pci 0000:fe:0b.1: [8086:3448] type 00 class 0x088000 [ 18.276065] pci 0000:fe:0b.2: [8086:344b] type 00 class 0x088000 [ 18.348067] pci 0000:fe:0c.0: [8086:344a] type 00 class 0x110100 [ 18.420092] pci 0000:fe:0d.0: [8086:344a] type 00 class 0x110100 [ 18.492084] pci 0000:fe:0e.0: [8086:344a] type 00 class 0x110100 [ 18.564148] pci 0000:fe:0f.0: [8086:344a] type 00 class 0x110100 [ 18.636160] pci 0000:fe:1a.0: [8086:2880] type 00 class 0x110100 [ 18.709088] pci 0000:fe:1b.0: [8086:2880] type 00 class 0x110100 [ 18.781088] pci 0000:fe:1c.0: [8086:2880] type 00 class 0x110100 [ 18.853153] pci 0000:fe:1d.0: [8086:2880] type 00 class 0x110100 [ 18.925180] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus ff]) [ 18.996003] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 19.109024] PCI host bridge to bus 0000:ff [ 19.158001] pci_bus 0000:ff: root bus resource [bus ff] [ 19.220012] pci 0000:ff:00.0: [8086:344c] type 00 class 0x088000 [ 19.292112] pci 0000:ff:00.1: [8086:344c] type 00 class 0x088000 [ 19.365112] pci 0000:ff:00.2: [8086:344c] type 00 class 0x088000 [ 19.437096] pci 0000:ff:00.3: [8086:344c] type 00 class 0x088000 [ 19.509117] pci 0000:ff:00.4: [8086:344c] type 00 class 0x088000 [ 19.581117] pci 0000:ff:00.5: [8086:344c] type 00 class 0x088000 [ 19.653089] pci 0000:ff:00.6: [8086:344c] type 00 class 0x088000 [ 19.725127] pci 0000:ff:00.7: [8086:344c] type 00 class 0x088000 [ 19.797126] pci 0000:ff:01.0: [8086:344c] type 00 class 0x088000 [ 19.869084] pci 0000:ff:01.1: [8086:344c] type 00 class 0x088000 [ 19.941130] pci 0000:ff:01.2: [8086:344c] type 00 class 0x088000 [ 20.014123] pci 0000:ff:01.3: [8086:344c] type 00 class 0x088000 [ 20.086081] pci 0000:ff:01.4: [8086:344c] type 00 class 0x088000 [ 20.158135] pci 0000:ff:01.5: [8086:344c] type 00 class 0x088000 [ 20.230133] pci 0000:ff:01.6: [8086:344c] type 00 class 0x088000 [ 20.302125] pci 0000:ff:01.7: [8086:344c] type 00 class 0x088000 [ 20.374133] pci 0000:ff:02.0: [8086:344c] type 00 class 0x088000 [ 20.446131] pci 0000:ff:02.1: [8086:344c] type 00 class 0x088000 [ 20.518129] pci 0000:ff:02.2: [8086:344c] type 00 class 0x088000 [ 20.591135] pci 0000:ff:02.3: [8086:344c] type 00 class 0x088000 [ 20.663136] pci 0000:ff:02.4: [8086:344c] type 00 class 0x088000 [ 20.735146] pci 0000:ff:02.5: [8086:344c] type 00 class 0x088000 [ 20.807141] pci 0000:ff:02.6: [8086:344c] type 00 class 0x088000 [ 20.879151] pci 0000:ff:02.7: [8086:344c] type 00 class 0x088000 [ 20.951144] pci 0000:ff:03.0: [8086:344c] type 00 class 0x088000 [ 21.023147] pci 0000:ff:03.1: [8086:344c] type 00 class 0x088000 [ 21.096156] pci 0000:ff:03.2: [8086:344c] type 00 class 0x088000 [ 21.168149] pci 0000:ff:03.3: [8086:344c] type 00 class 0x088000 [ 21.240146] pci 0000:ff:03.4: [8086:344c] type 00 class 0x088000 [ 21.312100] pci 0000:ff:03.5: [8086:344c] type 00 class 0x088000 [ 21.384099] pci 0000:ff:03.6: [8086:344c] type 00 class 0x088000 [ 21.456096] pci 0000:ff:03.7: [8086:344c] type 00 class 0x088000 [ 21.528084] pci 0000:ff:04.0: [8086:344c] type 00 class 0x088000 [ 21.600142] pci 0000:ff:04.1: [8086:344c] type 00 class 0x088000 [ 21.673124] pci 0000:ff:04.2: [8086:344c] type 00 class 0x088000 [ 21.745131] pci 0000:ff:04.3: [8086:344c] type 00 class 0x088000 [ 21.817137] pci 0000:ff:04.4: [8086:344c] type 00 class 0x088000 [ 21.889134] pci 0000:ff:04.5: [8086:344c] type 00 class 0x088000 [ 21.961142] pci 0000:ff:04.6: [8086:344c] type 00 class 0x088000 [ 22.033153] pci 0000:ff:04.7: [8086:344c] type 00 class 0x088000 [ 22.105162] pci 0000:ff:0a.0: [8086:344d] type 00 class 0x088000 [ 22.178114] pci 0000:ff:0a.1: [8086:344d] type 00 class 0x088000 [ 22.250113] pci 0000:ff:0a.2: [8086:344d] type 00 class 0x088000 [ 22.322093] pci 0000:ff:0a.3: [8086:344d] type 00 class 0x088000 [ 22.394122] pci 0000:ff:0a.4: [8086:344d] type 00 class 0x088000 [ 22.466114] pci 0000:ff:0a.5: [8086:344d] type 00 class 0x088000 [ 22.538092] pci 0000:ff:0a.6: [8086:344d] type 00 class 0x088000 [ 22.610125] pci 0000:ff:0a.7: [8086:344d] type 00 class 0x088000 [ 22.682119] pci 0000:ff:0b.0: [8086:344d] type 00 class 0x088000 [ 22.755089] pci 0000:ff:0b.1: [8086:344d] type 00 class 0x088000 [ 22.827130] pci 0000:ff:0b.2: [8086:344d] type 00 class 0x088000 [ 22.899124] pci 0000:ff:0b.3: [8086:344d] type 00 class 0x088000 [ 22.971081] pci 0000:ff:0b.4: [8086:344d] type 00 class 0x088000 [ 23.043132] pci 0000:ff:0b.5: [8086:344d] type 00 class 0x088000 [ 23.115137] pci 0000:ff:0b.6: [8086:344d] type 00 class 0x088000 [ 23.187127] pci 0000:ff:0b.7: [8086:344d] type 00 class 0x088000 [ 23.259129] pci 0000:ff:0c.0: [8086:344d] type 00 class 0x088000 [ 23.331132] pci 0000:ff:0c.1: [8086:344d] type 00 class 0x088000 [ 23.404128] pci 0000:ff:0c.2: [8086:344d] type 00 class 0x088000 [ 23.476138] pci 0000:ff:0c.3: [8086:344d] type 00 class 0x088000 [ 23.548136] pci 0000:ff:0c.4: [8086:344d] type 00 class 0x088000 [ 23.620142] pci 0000:ff:0c.5: [8086:344d] type 00 class 0x088000 [ 23.692142] pci 0000:ff:0c.6: [8086:344d] type 00 class 0x088000 [ 23.764156] pci 0000:ff:0c.7: [8086:344d] type 00 class 0x088000 [ 23.836145] pci 0000:ff:0d.0: [8086:344d] type 00 class 0x088000 [ 23.909146] pci 0000:ff:0d.1: [8086:344d] type 00 class 0x088000 [ 23.981154] pci 0000:ff:0d.2: [8086:344d] type 00 class 0x088000 [ 24.053151] pci 0000:ff:0d.3: [8086:344d] type 00 class 0x088000 [ 24.125146] pci 0000:ff:0d.4: [8086:344d] type 00 class 0x088000 [ 24.197101] pci 0000:ff:0d.5: [8086:344d] type 00 class 0x088000 [ 24.269100] pci 0000:ff:0d.6: [8086:344d] type 00 class 0x088000 [ 24.341092] pci 0000:ff:0d.7: [8086:344d] type 00 class 0x088000 [ 24.414087] pci 0000:ff:0e.0: [8086:344d] type 00 class 0x088000 [ 24.486140] pci 0000:ff:0e.1: [8086:344d] type 00 class 0x088000 [ 24.558131] pci 0000:ff:0e.2: [8086:344d] type 00 class 0x088000 [ 24.630131] pci 0000:ff:0e.3: [8086:344d] type 00 class 0x088000 [ 24.702137] pci 0000:ff:0e.4: [8086:344d] type 00 class 0x088000 [ 24.774139] pci 0000:ff:0e.5: [8086:344d] type 00 class 0x088000 [ 24.846142] pci 0000:ff:0e.6: [8086:344d] type 00 class 0x088000 [ 24.918151] pci 0000:ff:0e.7: [8086:344d] type 00 class 0x088000 [ 24.991176] pci 0000:ff:1d.0: [8086:344f] type 00 class 0x088000 [ 25.063121] pci 0000:ff:1d.1: [8086:3457] type 00 class 0x088000 [ 25.135121] pci 0000:ff:1e.0: [8086:3458] type 00 class 0x088000 [ 25.207065] pci 0000:ff:1e.1: [8086:3459] type 00 class 0x088000 [ 25.279063] pci 0000:ff:1e.2: [8086:345a] type 00 class 0x088000 [ 25.351063] pci 0000:ff:1e.3: [8086:345b] type 00 class 0x088000 [ 25.423062] pci 0000:ff:1e.4: [8086:345c] type 00 class 0x088000 [ 25.495067] pci 0000:ff:1e.5: [8086:345d] type 00 class 0x088000 [ 25.567064] pci 0000:ff:1e.6: [8086:345e] type 00 class 0x088000 [ 25.639063] pci 0000:ff:1e.7: [8086:345f] type 00 class 0x088000 [ 25.713657] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-0d]) [ 25.788012] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 25.901077] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 25.996065] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 26.088002] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 26.186430] PCI host bridge to bus 0000:00 [ 26.235002] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 26.317003] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 26.398002] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window] [ 26.480002] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window] [ 26.561002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 26.651002] pci_bus 0000:00: root bus resource [io 0x1000-0x4fff window] [ 26.732009] pci_bus 0000:00: root bus resource [mem 0x90000000-0xa47fbfff window] [ 26.822003] pci_bus 0000:00: root bus resource [mem 0x200000000000-0x20ffffffffff window] [ 26.920003] pci_bus 0000:00: root bus resource [bus 00-0d] [ 26.986009] pci 0000:00:00.0: [8086:09a2] type 00 class 0x088000 [ 27.058120] pci 0000:00:00.1: [8086:09a4] type 00 class 0x088000 [ 27.130098] pci 0000:00:00.2: [8086:09a3] type 00 class 0x088000 [ 27.202101] pci 0000:00:00.4: [8086:0998] type 00 class 0x060000 [ 27.274102] pci 0000:00:01.0: [8086:0b00] type 00 class 0x088000 [ 27.346013] pci 0000:00:01.0: reg 0x10: [mem 0x20fffff40000-0x20fffff43fff 64bit] [ 27.436105] pci 0000:00:01.1: [8086:0b00] type 00 class 0x088000 [ 27.508012] pci 0000:00:01.1: reg 0x10: [mem 0x20fffff3c000-0x20fffff3ffff 64bit] [ 27.598102] pci 0000:00:01.2: [8086:0b00] type 00 class 0x088000 [ 27.670012] pci 0000:00:01.2: reg 0x10: [mem 0x20fffff38000-0x20fffff3bfff 64bit] [ 27.760107] pci 0000:00:01.3: [8086:0b00] type 00 class 0x088000 [ 27.832012] pci 0000:00:01.3: reg 0x10: [mem 0x20fffff34000-0x20fffff37fff 64bit] [ 27.922101] pci 0000:00:01.4: [8086:0b00] type 00 class 0x088000 [ 27.994012] pci 0000:00:01.4: reg 0x10: [mem 0x20fffff30000-0x20fffff33fff 64bit] [ 28.083103] pci 0000:00:01.5: [8086:0b00] type 00 class 0x088000 [ 28.155012] pci 0000:00:01.5: reg 0x10: [mem 0x20fffff2c000-0x20fffff2ffff 64bit] [ 28.245106] pci 0000:00:01.6: [8086:0b00] type 00 class 0x088000 [ 28.317012] pci 0000:00:01.6: reg 0x10: [mem 0x20fffff28000-0x20fffff2bfff 64bit] [ 28.407100] pci 0000:00:01.7: [8086:0b00] type 00 class 0x088000 [ 28.479012] pci 0000:00:01.7: reg 0x10: [mem 0x20fffff24000-0x20fffff27fff 64bit] [ 28.569101] pci 0000:00:02.0: [8086:09a6] type 00 class 0x088000 [ 28.641010] pci 0000:00:02.0: reg 0x10: [mem 0x99ed4000-0x99ed5fff] [ 28.716094] pci 0000:00:02.1: [8086:09a7] type 00 class 0x088000 [ 28.788010] pci 0000:00:02.1: reg 0x10: [mem 0x99e00000-0x99e7ffff] [ 28.863006] pci 0000:00:02.1: reg 0x14: [mem 0x99d80000-0x99dfffff] [ 28.939087] pci 0000:00:02.4: [8086:3456] type 00 class 0x130000 [ 29.011011] pci 0000:00:02.4: reg 0x10: [mem 0x20ffffe00000-0x20ffffefffff 64bit] [ 29.100007] pci 0000:00:02.4: reg 0x18: [mem 0x20fffff20000-0x20fffff23fff 64bit] [ 29.190007] pci 0000:00:02.4: reg 0x20: [mem 0x20fffff00000-0x20fffff1ffff 64bit] [ 29.280098] pci 0000:00:11.0: [8086:a1ec] type 00 class 0xff0000 [ 29.352131] pci 0000:00:14.0: [8086:a1af] type 00 class 0x0c0330 [ 29.424025] pci 0000:00:14.0: reg 0x10: [mem 0x99ec0000-0x99ecffff 64bit] [ 29.506074] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 29.576101] pci 0000:00:14.2: [8086:a1b1] type 00 class 0x118000 [ 29.648022] pci 0000:00:14.2: reg 0x10: [mem 0x20fffff47000-0x20fffff47fff 64bit] [ 29.737146] pci 0000:00:1c.0: [8086:a190] type 01 class 0x060400 [ 29.810077] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 29.883112] pci 0000:00:1c.2: [8086:a192] type 01 class 0x060400 [ 29.955075] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 30.028086] pci 0000:00:1c.3: [8086:a193] type 01 class 0x060400 [ 30.100075] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 30.173089] pci 0000:00:1c.4: [8086:a194] type 01 class 0x060400 [ 30.245072] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 30.318105] pci 0000:00:1c.5: [8086:a195] type 01 class 0x060400 [ 30.390073] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 30.464090] pci 0000:00:1f.0: [8086:a1cb] type 00 class 0x060100 [ 30.536148] pci 0000:00:1f.2: [8086:a1a1] type 00 class 0x058000 [ 30.608015] pci 0000:00:1f.2: reg 0x10: [mem 0x99ed0000-0x99ed3fff] [ 30.683143] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 30.743035] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 30.802038] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 30.862047] pci 0000:01:00.0: [103c:3306] type 00 class 0x088000 [ 30.934023] pci 0000:01:00.0: reg 0x10: [io 0x1200-0x12ff] [ 31.000011] pci 0000:01:00.0: reg 0x14: [mem 0x99b9e000-0x99b9e3ff] [ 31.076011] pci 0000:01:00.0: reg 0x18: [io 0x1100-0x11ff] [ 31.142011] pci 0000:01:00.0: reg 0x1c: [mem 0x94000000-0x97ffffff] [ 31.218011] pci 0000:01:00.0: reg 0x20: [mem 0x99800000-0x999fffff] [ 31.293137] pci 0000:01:00.1: [102b:0538] type 00 class 0x030000 [ 31.365022] pci 0000:01:00.1: reg 0x10: [mem 0x98000000-0x98ffffff pref] [ 31.445011] pci 0000:01:00.1: reg 0x14: [mem 0x99b98000-0x99b9bfff] [ 31.520011] pci 0000:01:00.1: reg 0x18: [mem 0x99000000-0x997fffff] [ 31.595049] pci 0000:01:00.1: BAR 0: assigned to efifb [ 31.657006] pci 0000:01:00.1: efifb_fixup_resources+0x0/0x130 took 59570 usecs [ 31.744102] pci 0000:01:00.2: [103c:3307] type 00 class 0x088000 [ 31.816023] pci 0000:01:00.2: reg 0x10: [io 0x1000-0x10ff] [ 31.883010] pci 0000:01:00.2: reg 0x14: [mem 0x99b9d000-0x99b9d0ff] [ 31.958011] pci 0000:01:00.2: reg 0x18: [mem 0x99a00000-0x99afffff] [ 32.033011] pci 0000:01:00.2: reg 0x1c: [mem 0x99b00000-0x99b7ffff] [ 32.108011] pci 0000:01:00.2: reg 0x20: [mem 0x99b90000-0x99b97fff] [ 32.183011] pci 0000:01:00.2: reg 0x24: [mem 0x99b80000-0x99b8ffff] [ 32.258011] pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 32.339057] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 32.412060] pci 0000:01:00.4: [103c:22f6] type 00 class 0x0c0320 [ 32.484022] pci 0000:01:00.4: reg 0x10: [mem 0x99b9c000-0x99b9c0ff] [ 32.559158] pci 0000:00:1c.4: PCI bridge to [bus 01] [ 32.619003] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] [ 32.692004] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x99bfffff] [ 32.773036] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 32.833169] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 32.915036] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 32.998034] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.080032] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.163032] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.245032] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.328032] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.410032] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.492156] ACPI: PCI Root Bridge [PC01] (domain 0000 [bus 0e-29]) [ 33.567006] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 33.679069] acpi PNP0A08:01: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 33.774065] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 33.866002] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration [ 33.964047] PCI host bridge to bus 0000:0e [ 34.014002] pci_bus 0000:0e: root bus resource [io 0x5000-0x6fff window] [ 34.095002] pci_bus 0000:0e: root bus resource [mem 0xa4800000-0xae3fbfff window] [ 34.185002] pci_bus 0000:0e: root bus resource [mem 0x210000000000-0x21ffffffffff window] [ 34.283003] pci_bus 0000:0e: root bus resource [bus 0e-29] [ 34.348008] pci 0000:0e:00.0: [8086:09a2] type 00 class 0x088000 [ 34.420066] pci 0000:0e:00.1: [8086:09a4] type 00 class 0x088000 [ 34.493066] pci 0000:0e:00.2: [8086:09a3] type 00 class 0x088000 [ 34.565064] pci 0000:0e:00.4: [8086:0998] type 00 class 0x060000 [ 34.637065] pci 0000:0e:02.0: [8086:347a] type 01 class 0x060400 [ 34.709014] pci 0000:0e:02.0: reg 0x10: [mem 0x21fffff00000-0x21fffff1ffff 64bit] [ 34.799041] pci 0000:0e:02.0: PME# supported from D0 D3hot D3cold [ 34.872177] pci 0000:0f:00.0: [1000:10e2] type 00 class 0x010400 [ 34.944022] pci 0000:0f:00.0: reg 0x10: [mem 0xa4800000-0xa48fffff 64bit pref] [ 35.030009] pci 0000:0f:00.0: reg 0x18: [mem 0xa4900000-0xa49fffff 64bit pref] [ 35.117007] pci 0000:0f:00.0: reg 0x20: [mem 0xa4a00000-0xa4afffff] [ 35.192006] pci 0000:0f:00.0: reg 0x24: [io 0x5000-0x50ff] [ 35.259007] pci 0000:0f:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref] [ 35.339048] pci 0000:0f:00.0: supports D1 D2 [ 35.390081] pci 0000:0e:02.0: PCI bridge to [bus 0f] [ 35.450003] pci 0000:0e:02.0: bridge window [io 0x5000-0x5fff] [ 35.523003] pci 0000:0e:02.0: bridge window [mem 0xa4a00000-0xa4afffff] [ 35.604004] pci 0000:0e:02.0: bridge window [mem 0xa4800000-0xa49fffff 64bit pref] [ 35.697039] ACPI: PCI Root Bridge [PC02] (domain 0000 [bus 2a-45]) [ 35.771011] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 35.884066] acpi PNP0A08:02: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 35.979060] acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 36.071002] acpi PNP0A08:02: FADT indicates ASPM is unsupported, using BIOS configuration [ 36.169046] PCI host bridge to bus 0000:2a [ 36.218002] pci_bus 0000:2a: root bus resource [io 0x7000-0x8fff window] [ 36.300002] pci_bus 0000:2a: root bus resource [mem 0xae400000-0xb7ffbfff window] [ 36.389002] pci_bus 0000:2a: root bus resource [mem 0x220000000000-0x22ffffffffff window] [ 36.487002] pci_bus 0000:2a: root bus resource [bus 2a-45] [ 36.553008] pci 0000:2a:00.0: [8086:09a2] type 00 class 0x088000 [ 36.625066] pci 0000:2a:00.1: [8086:09a4] type 00 class 0x088000 [ 36.697068] pci 0000:2a:00.2: [8086:09a3] type 00 class 0x088000 [ 36.769067] pci 0000:2a:00.4: [8086:0998] type 00 class 0x060000 [ 36.841066] pci 0000:2a:02.0: [8086:347a] type 01 class 0x060400 [ 36.914015] pci 0000:2a:02.0: reg 0x10: [mem 0x22fffff00000-0x22fffff1ffff 64bit] [ 37.003013] pci 0000:2a:02.0: enabling Extended Tags [ 37.063028] pci 0000:2a:02.0: PME# supported from D0 D3hot D3cold [ 37.136092] pci 0000:2a:02.0: PCI bridge to [bus 2b] [ 37.195032] ACPI: PCI Root Bridge [PC04] (domain 0000 [bus 46-61]) [ 37.270006] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 37.382064] acpi PNP0A08:03: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 37.477060] acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 37.569002] acpi PNP0A08:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 37.667042] PCI host bridge to bus 0000:46 [ 37.716001] pci_bus 0000:46: root bus resource [io 0x9000-0xafff window] [ 37.798006] pci_bus 0000:46: root bus resource [mem 0xb8000000-0xc1bfbfff window] [ 37.887002] pci_bus 0000:46: root bus resource [mem 0x230000000000-0x23ffffffffff window] [ 37.986002] pci_bus 0000:46: root bus resource [bus 46-61] [ 38.051008] pci 0000:46:00.0: [8086:09a2] type 00 class 0x088000 [ 38.123067] pci 0000:46:00.1: [8086:09a4] type 00 class 0x088000 [ 38.195066] pci 0000:46:00.2: [8086:09a3] type 00 class 0x088000 [ 38.267064] pci 0000:46:00.4: [8086:0998] type 00 class 0x060000 [ 38.339066] pci 0000:46:02.0: [8086:347a] type 01 class 0x060400 [ 38.412014] pci 0000:46:02.0: reg 0x10: [mem 0x23fffff20000-0x23fffff3ffff 64bit] [ 38.501012] pci 0000:46:02.0: enabling Extended Tags [ 38.561027] pci 0000:46:02.0: PME# supported from D0 D3hot D3cold [ 38.634066] pci 0000:46:04.0: [8086:347c] type 01 class 0x060400 [ 38.706014] pci 0000:46:04.0: reg 0x10: [mem 0x23fffff00000-0x23fffff1ffff 64bit] [ 38.796040] pci 0000:46:04.0: PME# supported from D0 D3hot D3cold [ 38.869124] pci 0000:46:02.0: PCI bridge to [bus 47] [ 38.928072] pci 0000:48:00.0: [1077:8070] type 00 class 0x020000 [ 39.000025] pci 0000:48:00.0: reg 0x10: [mem 0xb9020000-0xb903ffff 64bit pref] [ 39.087010] pci 0000:48:00.0: reg 0x18: [mem 0xb8800000-0xb8ffffff 64bit pref] [ 39.174009] pci 0000:48:00.0: reg 0x20: [mem 0xb9050000-0xb905ffff 64bit pref] [ 39.260007] pci 0000:48:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 39.341055] pci 0000:48:00.0: PME# supported from D0 D3hot D3cold [ 39.414048] pci 0000:48:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:46:04.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link) [ 39.594056] pci 0000:48:00.1: [1077:8070] type 00 class 0x020000 [ 39.666022] pci 0000:48:00.1: reg 0x10: [mem 0xb9000000-0xb901ffff 64bit pref] [ 39.753010] pci 0000:48:00.1: reg 0x18: [mem 0xb8000000-0xb87fffff 64bit pref] [ 39.840010] pci 0000:48:00.1: reg 0x20: [mem 0xb9040000-0xb904ffff 64bit pref] [ 39.926007] pci 0000:48:00.1: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 40.007049] pci 0000:48:00.1: PME# supported from D0 D3hot D3cold [ 40.080098] pci 0000:46:04.0: PCI bridge to [bus 48] [ 40.139005] pci 0000:46:04.0: bridge window [mem 0xb8000000-0xb90fffff 64bit pref] [ 40.232054] ACPI: PCI Root Bridge [PC05] (domain 0000 [bus 62-7d]) [ 40.306006] acpi PNP0A08:04: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 40.419074] acpi PNP0A08:04: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 40.514061] acpi PNP0A08:04: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 40.606002] acpi PNP0A08:04: FADT indicates ASPM is unsupported, using BIOS configuration [ 40.704045] PCI host bridge to bus 0000:62 [ 40.753003] pci_bus 0000:62: root bus resource [io 0xb000-0xbfff window] [ 40.834003] pci_bus 0000:62: root bus resource [mem 0xc1c00000-0xcaffbfff window] [ 40.924002] pci_bus 0000:62: root bus resource [mem 0x240000000000-0x24ffffffffff window] [ 41.022003] pci_bus 0000:62: root bus resource [bus 62-7d] [ 41.088009] pci 0000:62:00.0: [8086:09a2] type 00 class 0x088000 [ 41.160081] pci 0000:62:00.1: [8086:09a4] type 00 class 0x088000 [ 41.232068] pci 0000:62:00.2: [8086:09a3] type 00 class 0x088000 [ 41.304065] pci 0000:62:00.4: [8086:0998] type 00 class 0x060000 [ 41.376068] pci 0000:62:02.0: [8086:347a] type 01 class 0x060400 [ 41.448015] pci 0000:62:02.0: reg 0x10: [mem 0x24fffff60000-0x24fffff7ffff 64bit] [ 41.538013] pci 0000:62:02.0: enabling Extended Tags [ 41.598033] pci 0000:62:02.0: PME# supported from D0 D3hot D3cold [ 41.671059] pci 0000:62:03.0: [8086:347b] type 01 class 0x060400 [ 41.743015] pci 0000:62:03.0: reg 0x10: [mem 0x24fffff40000-0x24fffff5ffff 64bit] [ 41.833014] pci 0000:62:03.0: enabling Extended Tags [ 41.892033] pci 0000:62:03.0: PME# supported from D0 D3hot D3cold [ 41.965058] pci 0000:62:04.0: [8086:347c] type 01 class 0x060400 [ 42.037015] pci 0000:62:04.0: reg 0x10: [mem 0x24fffff20000-0x24fffff3ffff 64bit] [ 42.127013] pci 0000:62:04.0: enabling Extended Tags [ 42.186033] pci 0000:62:04.0: PME# supported from D0 D3hot D3cold [ 42.259057] pci 0000:62:05.0: [8086:347d] type 01 class 0x060400 [ 42.332015] pci 0000:62:05.0: reg 0x10: [mem 0x24fffff00000-0x24fffff1ffff 64bit] [ 42.421013] pci 0000:62:05.0: enabling Extended Tags [ 42.481032] pci 0000:62:05.0: PME# supported from D0 D3hot D3cold [ 42.554082] pci 0000:62:02.0: PCI bridge to [bus 63] [ 42.613026] pci 0000:62:03.0: PCI bridge to [bus 64] [ 42.673025] pci 0000:62:04.0: PCI bridge to [bus 65] [ 42.732021] pci 0000:62:05.0: PCI bridge to [bus 66] [ 42.792047] ACPI: PCI Root Bridge [PC06] (domain 0000 [bus 80-82]) [ 42.866007] acpi PNP0A08:05: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 42.979070] acpi PNP0A08:05: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 43.074060] acpi PNP0A08:05: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 43.166002] acpi PNP0A08:05: FADT indicates ASPM is unsupported, using BIOS configuration [ 43.264032] PCI host bridge to bus 0000:80 [ 43.313002] pci_bus 0000:80: root bus resource [mem 0xcb800000-0xd4ffbfff window] [ 43.403002] pci_bus 0000:80: root bus resource [mem 0x250000000000-0x25ffffffffff window] [ 43.501003] pci_bus 0000:80: root bus resource [bus 80-82] [ 43.566008] pci 0000:80:00.0: [8086:09a2] type 00 class 0x088000 [ 43.638072] pci 0000:80:00.1: [8086:09a4] type 00 class 0x088000 [ 43.711068] pci 0000:80:00.2: [8086:09a3] type 00 class 0x088000 [ 43.783045] pci 0000:80:00.4: [8086:0998] type 00 class 0x060000 [ 43.855072] pci 0000:80:01.0: [8086:0b00] type 00 class 0x088000 [ 43.927014] pci 0000:80:01.0: reg 0x10: [mem 0x25fffff40000-0x25fffff43fff 64bit] [ 44.016076] pci 0000:80:01.1: [8086:0b00] type 00 class 0x088000 [ 44.089013] pci 0000:80:01.1: reg 0x10: [mem 0x25fffff3c000-0x25fffff3ffff 64bit] [ 44.178073] pci 0000:80:01.2: [8086:0b00] type 00 class 0x088000 [ 44.250013] pci 0000:80:01.2: reg 0x10: [mem 0x25fffff38000-0x25fffff3bfff 64bit] [ 44.340074] pci 0000:80:01.3: [8086:0b00] type 00 class 0x088000 [ 44.412014] pci 0000:80:01.3: reg 0x10: [mem 0x25fffff34000-0x25fffff37fff 64bit] [ 44.502073] pci 0000:80:01.4: [8086:0b00] type 00 class 0x088000 [ 44.574013] pci 0000:80:01.4: reg 0x10: [mem 0x25fffff30000-0x25fffff33fff 64bit] [ 44.664072] pci 0000:80:01.5: [8086:0b00] type 00 class 0x088000 [ 44.736013] pci 0000:80:01.5: reg 0x10: [mem 0x25fffff2c000-0x25fffff2ffff 64bit] [ 44.826051] pci 0000:80:01.6: [8086:0b00] type 00 class 0x088000 [ 44.898014] pci 0000:80:01.6: reg 0x10: [mem 0x25fffff28000-0x25fffff2bfff 64bit] [ 44.987075] pci 0000:80:01.7: [8086:0b00] type 00 class 0x088000 [ 45.060013] pci 0000:80:01.7: reg 0x10: [mem 0x25fffff24000-0x25fffff27fff 64bit] [ 45.149071] pci 0000:80:02.0: [8086:09a6] type 00 class 0x088000 [ 45.221011] pci 0000:80:02.0: reg 0x10: [mem 0xcb980000-0xcb981fff] [ 45.297058] pci 0000:80:02.1: [8086:09a7] type 00 class 0x088000 [ 45.369011] pci 0000:80:02.1: reg 0x10: [mem 0xcb900000-0xcb97ffff] [ 45.444006] pci 0000:80:02.1: reg 0x14: [mem 0xcb880000-0xcb8fffff] [ 45.519055] pci 0000:80:02.4: [8086:3456] type 00 class 0x130000 [ 45.591012] pci 0000:80:02.4: reg 0x10: [mem 0x25ffffe00000-0x25ffffefffff 64bit] [ 45.681007] pci 0000:80:02.4: reg 0x18: [mem 0x25fffff20000-0x25fffff23fff 64bit] [ 45.770007] pci 0000:80:02.4: reg 0x20: [mem 0x25fffff00000-0x25fffff1ffff 64bit] [ 45.860075] ACPI: PCI Root Bridge [PC07] (domain 0000 [bus 83-a0]) [ 45.934006] acpi PNP0A08:06: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 46.047065] acpi PNP0A08:06: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 46.142060] acpi PNP0A08:06: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 46.234002] acpi PNP0A08:06: FADT indicates ASPM is unsupported, using BIOS configuration [ 46.332032] PCI host bridge to bus 0000:83 [ 46.381002] pci_bus 0000:83: root bus resource [io 0xc000-0xcfff window] [ 46.462002] pci_bus 0000:83: root bus resource [mem 0xd5000000-0xdebfbfff window] [ 46.552002] pci_bus 0000:83: root bus resource [mem 0x260000000000-0x26ffffffffff window] [ 46.650004] pci_bus 0000:83: root bus resource [bus 83-a0] [ 46.716010] pci 0000:83:00.0: [8086:09a2] type 00 class 0x088000 [ 46.788075] pci 0000:83:00.1: [8086:09a4] type 00 class 0x088000 [ 46.860068] pci 0000:83:00.2: [8086:09a3] type 00 class 0x088000 [ 46.932067] pci 0000:83:00.4: [8086:0998] type 00 class 0x060000 [ 47.004071] pci 0000:83:02.0: [8086:347a] type 01 class 0x060400 [ 47.076016] pci 0000:83:02.0: reg 0x10: [mem 0x26fffff00000-0x26fffff1ffff 64bit] [ 47.166014] pci 0000:83:02.0: enabling Extended Tags [ 47.226032] pci 0000:83:02.0: PME# supported from D0 D3hot D3cold [ 47.299088] pci 0000:83:02.0: PCI bridge to [bus 84] [ 47.358034] ACPI: PCI Root Bridge [PC08] (domain 0000 [bus a1-be]) [ 47.432006] acpi PNP0A08:07: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 47.545065] acpi PNP0A08:07: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 47.640060] acpi PNP0A08:07: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 47.732002] acpi PNP0A08:07: FADT indicates ASPM is unsupported, using BIOS configuration [ 47.830026] PCI host bridge to bus 0000:a1 [ 47.879002] pci_bus 0000:a1: root bus resource [io 0xd000-0xdfff window] [ 47.961002] pci_bus 0000:a1: root bus resource [mem 0xdec00000-0xe87fbfff window] [ 48.050003] pci_bus 0000:a1: root bus resource [mem 0x270000000000-0x27ffffffffff window] [ 48.148003] pci_bus 0000:a1: root bus resource [bus a1-be] [ 48.214009] pci 0000:a1:00.0: [8086:09a2] type 00 class 0x088000 [ 48.286071] pci 0000:a1:00.1: [8086:09a4] type 00 class 0x088000 [ 48.358066] pci 0000:a1:00.2: [8086:09a3] type 00 class 0x088000 [ 48.430069] pci 0000:a1:00.4: [8086:0998] type 00 class 0x060000 [ 48.502071] pci 0000:a1:02.0: [8086:347a] type 01 class 0x060400 [ 48.574016] pci 0000:a1:02.0: reg 0x10: [mem 0x27fffff00000-0x27fffff1ffff 64bit] [ 48.664014] pci 0000:a1:02.0: enabling Extended Tags [ 48.724033] pci 0000:a1:02.0: PME# supported from D0 D3hot D3cold [ 48.797088] pci 0000:a1:02.0: PCI bridge to [bus a2] [ 48.856032] ACPI: PCI Root Bridge [PC10] (domain 0000 [bus bf-dc]) [ 48.930006] acpi PNP0A08:08: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 49.043064] acpi PNP0A08:08: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 49.138060] acpi PNP0A08:08: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 49.230002] acpi PNP0A08:08: FADT indicates ASPM is unsupported, using BIOS configuration [ 49.328045] PCI host bridge to bus 0000:bf [ 49.377001] pci_bus 0000:bf: root bus resource [io 0xe000-0xefff window] [ 49.459002] pci_bus 0000:bf: root bus resource [mem 0xe8800000-0xf23fbfff window] [ 49.548002] pci_bus 0000:bf: root bus resource [mem 0x280000000000-0x28ffffffffff window] [ 49.646002] pci_bus 0000:bf: root bus resource [bus bf-dc] [ 49.712008] pci 0000:bf:00.0: [8086:09a2] type 00 class 0x088000 [ 49.784046] pci 0000:bf:00.1: [8086:09a4] type 00 class 0x088000 [ 49.856072] pci 0000:bf:00.2: [8086:09a3] type 00 class 0x088000 [ 49.928072] pci 0000:bf:00.4: [8086:0998] type 00 class 0x060000 [ 50.000074] pci 0000:bf:02.0: [8086:347a] type 01 class 0x060400 [ 50.073016] pci 0000:bf:02.0: reg 0x10: [mem 0x28fffff00000-0x28fffff1ffff 64bit] [ 50.162014] pci 0000:bf:02.0: enabling Extended Tags [ 50.222032] pci 0000:bf:02.0: PME# supported from D0 D3hot D3cold [ 50.295100] pci 0000:bf:02.0: PCI bridge to [bus c0] [ 50.354033] ACPI: PCI Root Bridge [PC11] (domain 0000 [bus dd-fa]) [ 50.429006] acpi PNP0A08:09: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 50.541065] acpi PNP0A08:09: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 50.636064] acpi PNP0A08:09: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 50.728003] acpi PNP0A08:09: FADT indicates ASPM is unsupported, using BIOS configuration [ 50.826044] PCI host bridge to bus 0000:dd [ 50.875002] pci_bus 0000:dd: root bus resource [io 0xf000-0xffff window] [ 50.957002] pci_bus 0000:dd: root bus resource [mem 0xf2400000-0xfb7fbfff window] [ 51.046002] pci_bus 0000:dd: root bus resource [mem 0x290000000000-0x29ffffffffff window] [ 51.145003] pci_bus 0000:dd: root bus resource [bus dd-fa] [ 51.210011] pci 0000:dd:00.0: [8086:09a2] type 00 class 0x088000 [ 51.282076] pci 0000:dd:00.1: [8086:09a4] type 00 class 0x088000 [ 51.354073] pci 0000:dd:00.2: [8086:09a3] type 00 class 0x088000 [ 51.426071] pci 0000:dd:00.4: [8086:0998] type 00 class 0x060000 [ 51.499076] pci 0000:dd:02.0: [8086:347a] type 01 class 0x060400 [ 51.571018] pci 0000:dd:02.0: reg 0x10: [mem 0x29fffff60000-0x29fffff7ffff 64bit] [ 51.660015] pci 0000:dd:02.0: enabling Extended Tags [ 51.720037] pci 0000:dd:02.0: PME# supported from D0 D3hot D3cold [ 51.793067] pci 0000:dd:03.0: [8086:347b] type 01 class 0x060400 [ 51.865017] pci 0000:dd:03.0: reg 0x10: [mem 0x29fffff40000-0x29fffff5ffff 64bit] [ 51.955014] pci 0000:dd:03.0: enabling Extended Tags [ 52.014037] pci 0000:dd:03.0: PME# supported from D0 D3hot D3cold [ 52.087068] pci 0000:dd:04.0: [8086:347c] type 01 class 0x060400 [ 52.159016] pci 0000:dd:04.0: reg 0x10: [mem 0x29fffff20000-0x29fffff3ffff 64bit] [ 52.249014] pci 0000:dd:04.0: enabling Extended Tags [ 52.309040] pci 0000:dd:04.0: PME# supported from D0 D3hot D3cold [ 52.382064] pci 0000:dd:05.0: [8086:347d] type 01 class 0x060400 [ 52.454017] pci 0000:dd:05.0: reg 0x10: [mem 0x29fffff00000-0x29fffff1ffff 64bit] [ 52.544014] pci 0000:dd:05.0: enabling Extended Tags [ 52.603037] pci 0000:dd:05.0: PME# supported from D0 D3hot D3cold [ 52.676092] pci 0000:dd:02.0: PCI bridge to [bus de] [ 52.736027] pci 0000:dd:03.0: PCI bridge to [bus df] [ 52.795023] pci 0000:dd:04.0: PCI bridge to [bus e0] [ 52.855028] pci 0000:dd:05.0: PCI bridge to [bus e1] [ 52.915019] iommu: Default domain type: Passthrough [ 52.974073] pci 0000:01:00.1: vgaarb: setting as boot VGA device [ 52.975000] pci 0000:01:00.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 53.149021] pci 0000:01:00.1: vgaarb: bridge control possible [ 53.218002] vgaarb: loaded [ 53.250113] SCSI subsystem initialized [ 53.295020] ACPI: bus type USB registered [ 53.343018] usbcore: registered new interface driver usbfs [ 53.409007] usbcore: registered new interface driver hub [ 53.473013] usbcore: registered new device driver usb [ 53.533061] pps_core: LinuxPPS API ver. 1 registered [ 53.593003] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 53.702004] PTP clock support registered [ 53.750011] EDAC MC: Ver: 3.0.0 [ 53.788023] Registered efivars operations [ 53.837050] PCI: Using ACPI for IRQ routing [ 53.890753] Expanded resource Reserved due to conflict with PCI Bus 0000:01 [ 53.975342] NetLabel: Initializing [ 54.016001] NetLabel: domain hash size = 128 [ 54.068002] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 54.136014] NetLabel: unlabeled traffic allowed by default [ 54.203628] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 54.278003] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 54.350250] clocksource: Switched to clocksource tsc-early [ 54.429287] VFS: Disk quotas dquot_6.6.0 [ 54.476433] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 54.559149] pnp: PnP ACPI init [ 54.596506] system 00:01: [io 0x0500-0x053f] has been reserved [ 54.667629] system 00:01: [io 0x0400-0x047f] has been reserved [ 54.738749] system 00:01: [io 0x0540-0x057f] has been reserved [ 54.809865] system 00:01: [io 0x0600-0x061f] has been reserved [ 54.880985] system 00:01: [io 0x0880-0x0883] has been reserved [ 54.952104] system 00:01: [io 0x0800-0x081f] has been reserved [ 55.023225] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved [ 55.102710] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 55.182195] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 55.261682] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 55.341173] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 55.420666] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 55.500151] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 55.579768] pnp: PnP ACPI: found 4 devices [ 55.634459] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 55.741210] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 55.800835] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 55.860457] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 55.920082] pci 0000:01:00.2: BAR 6: assigned [mem 0x90000000-0x9003ffff pref] [ 56.006885] pci 0000:00:1c.4: PCI bridge to [bus 01] [ 56.066500] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] [ 56.139713] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x99bfffff] [ 56.221294] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 56.280918] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 56.355173] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 56.429429] pci_bus 0000:00: resource 6 [io 0x03b0-0x03bb window] [ 56.503687] pci_bus 0000:00: resource 7 [io 0x03c0-0x03df window] [ 56.577942] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 56.660566] pci_bus 0000:00: resource 9 [io 0x1000-0x4fff window] [ 56.734819] pci_bus 0000:00: resource 10 [mem 0x90000000-0xa47fbfff window] [ 56.818487] pci_bus 0000:00: resource 11 [mem 0x200000000000-0x20ffffffffff window] [ 56.910522] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 56.977458] pci_bus 0000:01: resource 1 [mem 0x90000000-0x99bfffff] [ 57.052818] pci 0000:0f:00.0: BAR 6: no space for [mem size 0x00100000 pref] [ 57.137534] pci 0000:0f:00.0: BAR 6: failed to assign [mem size 0x00100000 pref] [ 57.226434] pci 0000:0e:02.0: PCI bridge to [bus 0f] [ 57.286049] pci 0000:0e:02.0: bridge window [io 0x5000-0x5fff] [ 57.359262] pci 0000:0e:02.0: bridge window [mem 0xa4a00000-0xa4afffff] [ 57.440837] pci 0000:0e:02.0: bridge window [mem 0xa4800000-0xa49fffff 64bit pref] [ 57.533919] pci_bus 0000:0e: resource 4 [io 0x5000-0x6fff window] [ 57.608178] pci_bus 0000:0e: resource 5 [mem 0xa4800000-0xae3fbfff window] [ 57.690798] pci_bus 0000:0e: resource 6 [mem 0x210000000000-0x21ffffffffff window] [ 57.781786] pci_bus 0000:0f: resource 0 [io 0x5000-0x5fff] [ 57.848723] pci_bus 0000:0f: resource 1 [mem 0xa4a00000-0xa4afffff] [ 57.924023] pci_bus 0000:0f: resource 2 [mem 0xa4800000-0xa49fffff 64bit pref] [ 58.010846] pci 0000:2a:02.0: PCI bridge to [bus 2b] [ 58.070472] pci_bus 0000:2a: resource 4 [io 0x7000-0x8fff window] [ 58.144726] pci_bus 0000:2a: resource 5 [mem 0xae400000-0xb7ffbfff window] [ 58.227347] pci_bus 0000:2a: resource 6 [mem 0x220000000000-0x22ffffffffff window] [ 58.318343] pci 0000:46:04.0: BAR 14: assigned [mem 0xb9100000-0xb91fffff] [ 58.400966] pci 0000:46:02.0: PCI bridge to [bus 47] [ 58.460592] pci 0000:48:00.0: BAR 6: assigned [mem 0xb9100000-0xb917ffff pref] [ 58.547400] pci 0000:48:00.1: BAR 6: assigned [mem 0xb9180000-0xb91fffff pref] [ 58.634202] pci 0000:46:04.0: PCI bridge to [bus 48] [ 58.693820] pci 0000:46:04.0: bridge window [mem 0xb9100000-0xb91fffff] [ 58.775395] pci 0000:46:04.0: bridge window [mem 0xb8000000-0xb90fffff 64bit pref] [ 58.868478] pci_bus 0000:46: resource 4 [io 0x9000-0xafff window] [ 58.942736] pci_bus 0000:46: resource 5 [mem 0xb8000000-0xc1bfbfff window] [ 59.025357] pci_bus 0000:46: resource 6 [mem 0x230000000000-0x23ffffffffff window] [ 59.116347] pci_bus 0000:48: resource 1 [mem 0xb9100000-0xb91fffff] [ 59.191647] pci_bus 0000:48: resource 2 [mem 0xb8000000-0xb90fffff 64bit pref] [ 59.278456] pci 0000:62:02.0: bridge window [io 0x1000-0x0fff] to [bus 63] add_size 1000 [ 59.376770] pci 0000:62:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 63] add_size 200000 add_align 100000 [ 59.514821] pci 0000:62:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 63] add_size 200000 add_align 100000 [ 59.641363] pci 0000:62:03.0: bridge window [io 0x1000-0x0fff] to [bus 64] add_size 1000 [ 59.739669] pci 0000:62:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 64] add_size 200000 add_align 100000 [ 59.877711] pci 0000:62:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus 64] add_size 200000 add_align 100000 [ 60.004253] pci 0000:62:04.0: bridge window [io 0x1000-0x0fff] to [bus 65] add_size 1000 [ 60.102557] pci 0000:62:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 65] add_size 200000 add_align 100000 [ 60.240602] pci 0000:62:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 65] add_size 200000 add_align 100000 [ 60.367153] pci 0000:62:05.0: bridge window [io 0x1000-0x0fff] to [bus 66] add_size 1000 [ 60.465463] pci 0000:62:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 66] add_size 200000 add_align 100000 [ 60.603505] pci 0000:62:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 66] add_size 200000 add_align 100000 [ 60.730052] pci 0000:62:02.0: BAR 14: assigned [mem 0xc1c00000-0xc1dfffff] [ 60.812674] pci 0000:62:02.0: BAR 15: assigned [mem 0x240000000000-0x2400001fffff 64bit pref] [ 60.915162] pci 0000:62:03.0: BAR 14: assigned [mem 0xc1e00000-0xc1ffffff] [ 60.997784] pci 0000:62:03.0: BAR 15: assigned [mem 0x240000200000-0x2400003fffff 64bit pref] [ 61.100273] pci 0000:62:04.0: BAR 14: assigned [mem 0xc2000000-0xc21fffff] [ 61.182893] pci 0000:62:04.0: BAR 15: assigned [mem 0x240000400000-0x2400005fffff 64bit pref] [ 61.285384] pci 0000:62:05.0: BAR 14: assigned [mem 0xc2200000-0xc23fffff] [ 61.368006] pci 0000:62:05.0: BAR 15: assigned [mem 0x240000600000-0x2400007fffff 64bit pref] [ 61.470498] pci 0000:62:02.0: BAR 13: assigned [io 0xb000-0xbfff] [ 61.544753] pci 0000:62:03.0: BAR 13: no space for [io size 0x1000] [ 61.621099] pci 0000:62:03.0: BAR 13: failed to assign [io size 0x1000] [ 61.701635] pci 0000:62:04.0: BAR 13: no space for [io size 0x1000] [ 61.777986] pci 0000:62:04.0: BAR 13: failed to assign [io size 0x1000] [ 61.858516] pci 0000:62:05.0: BAR 13: no space for [io size 0x1000] [ 61.934860] pci 0000:62:05.0: BAR 13: failed to assign [io size 0x1000] [ 62.015394] pci 0000:62:05.0: BAR 13: assigned [io 0xb000-0xbfff] [ 62.089648] pci 0000:62:04.0: BAR 13: no space for [io size 0x1000] [ 62.165994] pci 0000:62:04.0: BAR 13: failed to assign [io size 0x1000] [ 62.246527] pci 0000:62:03.0: BAR 13: no space for [io size 0x1000] [ 62.322872] pci 0000:62:03.0: BAR 13: failed to assign [io size 0x1000] [ 62.403403] pci 0000:62:02.0: BAR 13: no space for [io size 0x1000] [ 62.479751] pci 0000:62:02.0: BAR 13: failed to assign [io size 0x1000] [ 62.560281] pci 0000:62:02.0: PCI bridge to [bus 63] [ 62.619899] pci 0000:62:02.0: bridge window [mem 0xc1c00000-0xc1dfffff] [ 62.701475] pci 0000:62:02.0: bridge window [mem 0x240000000000-0x2400001fffff 64bit pref] [ 62.802919] pci 0000:62:03.0: PCI bridge to [bus 64] [ 62.862533] pci 0000:62:03.0: bridge window [mem 0xc1e00000-0xc1ffffff] [ 62.944112] pci 0000:62:03.0: bridge window [mem 0x240000200000-0x2400003fffff 64bit pref] [ 63.045556] pci 0000:62:04.0: PCI bridge to [bus 65] [ 63.105174] pci 0000:62:04.0: bridge window [mem 0xc2000000-0xc21fffff] [ 63.186749] pci 0000:62:04.0: bridge window [mem 0x240000400000-0x2400005fffff 64bit pref] [ 63.288193] pci 0000:62:05.0: PCI bridge to [bus 66] [ 63.347807] pci 0000:62:05.0: bridge window [io 0xb000-0xbfff] [ 63.421022] pci 0000:62:05.0: bridge window [mem 0xc2200000-0xc23fffff] [ 63.502598] pci 0000:62:05.0: bridge window [mem 0x240000600000-0x2400007fffff 64bit pref] [ 63.604044] pci_bus 0000:62: resource 4 [io 0xb000-0xbfff window] [ 63.678302] pci_bus 0000:62: resource 5 [mem 0xc1c00000-0xcaffbfff window] [ 63.760922] pci_bus 0000:62: resource 6 [mem 0x240000000000-0x24ffffffffff window] [ 63.851911] pci_bus 0000:63: resource 1 [mem 0xc1c00000-0xc1dfffff] [ 63.927213] pci_bus 0000:63: resource 2 [mem 0x240000000000-0x2400001fffff 64bit pref] [ 64.022382] pci_bus 0000:64: resource 1 [mem 0xc1e00000-0xc1ffffff] [ 64.097683] pci_bus 0000:64: resource 2 [mem 0x240000200000-0x2400003fffff 64bit pref] [ 64.192855] pci_bus 0000:65: resource 1 [mem 0xc2000000-0xc21fffff] [ 64.268156] pci_bus 0000:65: resource 2 [mem 0x240000400000-0x2400005fffff 64bit pref] [ 64.363326] pci_bus 0000:66: resource 0 [io 0xb000-0xbfff] [ 64.430262] pci_bus 0000:66: resource 1 [mem 0xc2200000-0xc23fffff] [ 64.505565] pci_bus 0000:66: resource 2 [mem 0x240000600000-0x2400007fffff 64bit pref] [ 64.600751] pci_bus 0000:80: resource 4 [mem 0xcb800000-0xd4ffbfff window] [ 64.683377] pci_bus 0000:80: resource 5 [mem 0x250000000000-0x25ffffffffff window] [ 64.774365] pci 0000:83:02.0: PCI bridge to [bus 84] [ 64.833991] pci_bus 0000:83: resource 4 [io 0xc000-0xcfff window] [ 64.908249] pci_bus 0000:83: resource 5 [mem 0xd5000000-0xdebfbfff window] [ 64.990870] pci_bus 0000:83: resource 6 [mem 0x260000000000-0x26ffffffffff window] [ 65.081859] pci 0000:a1:02.0: PCI bridge to [bus a2] [ 65.141477] pci_bus 0000:a1: resource 4 [io 0xd000-0xdfff window] [ 65.215736] pci_bus 0000:a1: resource 5 [mem 0xdec00000-0xe87fbfff window] [ 65.298359] pci_bus 0000:a1: resource 6 [mem 0x270000000000-0x27ffffffffff window] [ 65.389348] pci 0000:bf:02.0: PCI bridge to [bus c0] [ 65.448972] pci_bus 0000:bf: resource 4 [io 0xe000-0xefff window] [ 65.523229] pci_bus 0000:bf: resource 5 [mem 0xe8800000-0xf23fbfff window] [ 65.605852] pci_bus 0000:bf: resource 6 [mem 0x280000000000-0x28ffffffffff window] [ 65.696843] pci 0000:dd:02.0: bridge window [io 0x1000-0x0fff] to [bus de] add_size 1000 [ 65.795153] pci 0000:dd:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus de] add_size 200000 add_align 100000 [ 65.933197] pci 0000:dd:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus de] add_size 200000 add_align 100000 [ 66.059737] pci 0000:dd:03.0: bridge window [io 0x1000-0x0fff] to [bus df] add_size 1000 [ 66.158043] pci 0000:dd:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus df] add_size 200000 add_align 100000 [ 66.296087] pci 0000:dd:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus df] add_size 200000 add_align 100000 [ 66.422626] pci 0000:dd:04.0: bridge window [io 0x1000-0x0fff] to [bus e0] add_size 1000 [ 66.520932] pci 0000:dd:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus e0] add_size 200000 add_align 100000 [ 66.658976] pci 0000:dd:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus e0] add_size 200000 add_align 100000 [ 66.785518] pci 0000:dd:05.0: bridge window [io 0x1000-0x0fff] to [bus e1] add_size 1000 [ 66.883822] pci 0000:dd:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus e1] add_size 200000 add_align 100000 [ 67.021864] pci 0000:dd:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus e1] add_size 200000 add_align 100000 [ 67.148409] pci 0000:dd:02.0: BAR 14: assigned [mem 0xf2400000-0xf25fffff] [ 67.231033] pci 0000:dd:02.0: BAR 15: assigned [mem 0x290000000000-0x2900001fffff 64bit pref] [ 67.333524] pci 0000:dd:03.0: BAR 14: assigned [mem 0xf2600000-0xf27fffff] [ 67.416145] pci 0000:dd:03.0: BAR 15: assigned [mem 0x290000200000-0x2900003fffff 64bit pref] [ 67.518635] pci 0000:dd:04.0: BAR 14: assigned [mem 0xf2800000-0xf29fffff] [ 67.601257] pci 0000:dd:04.0: BAR 15: assigned [mem 0x290000400000-0x2900005fffff 64bit pref] [ 67.703746] pci 0000:dd:05.0: BAR 14: assigned [mem 0xf2a00000-0xf2bfffff] [ 67.786368] pci 0000:dd:05.0: BAR 15: assigned [mem 0x290000600000-0x2900007fffff 64bit pref] [ 67.888858] pci 0000:dd:02.0: BAR 13: assigned [io 0xf000-0xffff] [ 67.963112] pci 0000:dd:03.0: BAR 13: no space for [io size 0x1000] [ 68.039462] pci 0000:dd:03.0: BAR 13: failed to assign [io size 0x1000] [ 68.119991] pci 0000:dd:04.0: BAR 13: no space for [io size 0x1000] [ 68.196339] pci 0000:dd:04.0: BAR 13: failed to assign [io size 0x1000] [ 68.276867] pci 0000:dd:05.0: BAR 13: no space for [io size 0x1000] [ 68.353215] pci 0000:dd:05.0: BAR 13: failed to assign [io size 0x1000] [ 68.433749] pci 0000:dd:05.0: BAR 13: assigned [io 0xf000-0xffff] [ 68.508004] pci 0000:dd:04.0: BAR 13: no space for [io size 0x1000] [ 68.584351] pci 0000:dd:04.0: BAR 13: failed to assign [io size 0x1000] [ 68.664881] pci 0000:dd:03.0: BAR 13: no space for [io size 0x1000] [ 68.741227] pci 0000:dd:03.0: BAR 13: failed to assign [io size 0x1000] [ 68.821758] pci 0000:dd:02.0: BAR 13: no space for [io size 0x1000] [ 68.898106] pci 0000:dd:02.0: BAR 13: failed to assign [io size 0x1000] [ 68.978637] pci 0000:dd:02.0: PCI bridge to [bus de] [ 69.038254] pci 0000:dd:02.0: bridge window [mem 0xf2400000-0xf25fffff] [ 69.119830] pci 0000:dd:02.0: bridge window [mem 0x290000000000-0x2900001fffff 64bit pref] [ 69.221276] pci 0000:dd:03.0: PCI bridge to [bus df] [ 69.280889] pci 0000:dd:03.0: bridge window [mem 0xf2600000-0xf27fffff] [ 69.362468] pci 0000:dd:03.0: bridge window [mem 0x290000200000-0x2900003fffff 64bit pref] [ 69.463910] pci 0000:dd:04.0: PCI bridge to [bus e0] [ 69.523526] pci 0000:dd:04.0: bridge window [mem 0xf2800000-0xf29fffff] [ 69.605102] pci 0000:dd:04.0: bridge window [mem 0x290000400000-0x2900005fffff 64bit pref] [ 69.706547] pci 0000:dd:05.0: PCI bridge to [bus e1] [ 69.766161] pci 0000:dd:05.0: bridge window [io 0xf000-0xffff] [ 69.839374] pci 0000:dd:05.0: bridge window [mem 0xf2a00000-0xf2bfffff] [ 69.920950] pci 0000:dd:05.0: bridge window [mem 0x290000600000-0x2900007fffff 64bit pref] [ 70.022396] pci_bus 0000:dd: resource 4 [io 0xf000-0xffff window] [ 70.096650] pci_bus 0000:dd: resource 5 [mem 0xf2400000-0xfb7fbfff window] [ 70.179271] pci_bus 0000:dd: resource 6 [mem 0x290000000000-0x29ffffffffff window] [ 70.270258] pci_bus 0000:de: resource 1 [mem 0xf2400000-0xf25fffff] [ 70.345559] pci_bus 0000:de: resource 2 [mem 0x290000000000-0x2900001fffff 64bit pref] [ 70.440730] pci_bus 0000:df: resource 1 [mem 0xf2600000-0xf27fffff] [ 70.516031] pci_bus 0000:df: resource 2 [mem 0x290000200000-0x2900003fffff 64bit pref] [ 70.611206] pci_bus 0000:e0: resource 1 [mem 0xf2800000-0xf29fffff] [ 70.686509] pci_bus 0000:e0: resource 2 [mem 0x290000400000-0x2900005fffff 64bit pref] [ 70.781680] pci_bus 0000:e1: resource 0 [io 0xf000-0xffff] [ 70.848615] pci_bus 0000:e1: resource 1 [mem 0xf2a00000-0xf2bfffff] [ 70.923918] pci_bus 0000:e1: resource 2 [mem 0x290000600000-0x2900007fffff 64bit pref] [ 71.019205] NET: Registered protocol family 2 [ 71.071993] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes) [ 71.169519] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 71.260047] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 71.340720] TCP: Hash tables configured (established 524288 bind 65536) [ 71.420656] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes) [ 71.504564] UDP hash table entries: 65536 (order: 9, 2097152 bytes) [ 71.580212] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes) [ 71.661265] NET: Registered protocol family 1 [ 71.713565] NET: Registered protocol family 44 [ 71.767295] pci 0000:01:00.1: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 71.867700] pci 0000:01:00.1: pci_fixup_video+0x0/0x110 took 98052 usecs [ 71.948886] PCI: CLS 64 bytes, default 64 [ 71.997045] Unpacking initramfs... [ 73.033330] Freeing initrd memory: 89452K [ 73.081648] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 73.159041] software IO TLB: mapped [mem 0x6b800000-0x6f800000] (64MB) [ 73.385764] Initialise system trusted keyrings [ 73.439116] Key type blacklist registered [ 73.487325] workingset: timestamp_bits=36 max_order=27 bucket_order=0 [ 73.566062] zbud: loaded [ 73.596737] pstore: using deflate compression [ 73.649493] Platform Keyring initialized [ 74.231472] NET: Registered protocol family 38 [ 74.284822] tsc: Refined TSC clocksource calibration: 2194.843 MHz [ 74.338011] Key type asymmetric registered [ 74.359122] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa32b623c0, max_idle_ns: 440795289684 ns [ 74.408239] Asymmetric key parser 'x509' registered [ 74.587134] clocksource: Switched to clocksource tsc [ 74.587169] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 74.736197] io scheduler mq-deadline registered [ 74.790712] io scheduler kyber registered [ 74.838991] io scheduler bfq registered [ 74.885882] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 74.970066] pcieport 0000:00:1c.0: Signaling with IRQ 130 [ 75.035277] pcieport 0000:00:1c.2: Signaling with IRQ 131 [ 75.100452] pcieport 0000:00:1c.3: Signaling with IRQ 132 [ 75.165660] pcieport 0000:00:1c.4: Signaling with IRQ 133 [ 75.230872] pcieport 0000:00:1c.5: Signaling with IRQ 134 [ 75.296022] pcieport 0000:0e:02.0: Signaling with IRQ 135 [ 75.361128] pcieport 0000:2a:02.0: Signaling with IRQ 136 [ 75.426294] pcieport 0000:46:02.0: Signaling with IRQ 137 [ 75.491419] pcieport 0000:46:04.0: Signaling with IRQ 138 [ 75.556550] pcieport 0000:62:02.0: Signaling with IRQ 139 [ 75.621565] pcieport 0000:62:02.0: Slot #13 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 75.803126] pcieport 0000:62:03.0: Signaling with IRQ 140 [ 75.868141] pcieport 0000:62:03.0: Slot #14 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 76.049648] pcieport 0000:62:04.0: Signaling with IRQ 141 [ 76.114660] pcieport 0000:62:04.0: Slot #15 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 76.296169] pcieport 0000:62:05.0: Signaling with IRQ 142 [ 76.361181] pcieport 0000:62:05.0: Slot #16 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 76.542743] pcieport 0000:83:02.0: Signaling with IRQ 143 [ 76.607859] pcieport 0000:a1:02.0: Signaling with IRQ 144 [ 76.673014] pcieport 0000:bf:02.0: Signaling with IRQ 145 [ 76.738156] pcieport 0000:dd:02.0: Signaling with IRQ 146 [ 76.803171] pcieport 0000:dd:02.0: Slot #29 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 76.984707] pcieport 0000:dd:03.0: Signaling with IRQ 147 [ 77.049718] pcieport 0000:dd:03.0: Slot #30 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 77.231222] pcieport 0000:dd:04.0: Signaling with IRQ 148 [ 77.296236] pcieport 0000:dd:04.0: Slot #31 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 77.477734] pcieport 0000:dd:05.0: Signaling with IRQ 149 [ 77.542745] pcieport 0000:dd:05.0: Slot #32 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 77.724441] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 77.805243] efifb: probing for efifb [ 77.848250] efifb: framebuffer at 0x98000000, using 3072k, total 3072k [ 77.926874] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 77.999205] efifb: scrolling: redraw [ 78.042189] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 78.109342] Console: switching to colour frame buffer device 128x48 [ 78.205140] fb0: EFI VGA frame buffer device [ 78.262493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 78.351910] ACPI: Power Button [PWRF] [ 78.398734] acpi/hmat: HMAT: Memory Flags:0001 Processor Domain:0 Memory Domain:0 [ 78.489155] acpi/hmat: HMAT: Memory Flags:0001 Processor Domain:1 Memory Domain:1 [ 78.579578] acpi/hmat: HMAT: Memory Flags:0001 Processor Domain:2 Memory Domain:2 [ 78.670006] acpi/hmat: HMAT: Memory Flags:0001 Processor Domain:3 Memory Domain:3 [ 78.760432] acpi/hmat: HMAT: Locality: Flags:00 Type:Access Latency Initiator Domains:4 Target Domains:4 Base:100 [ 78.884513] acpi/hmat: Initiator-Target[0-0]:0 nsec [ 78.945498] acpi/hmat: Initiator-Target[0-1]:0 nsec [ 79.006481] acpi/hmat: Initiator-Target[0-2]:50 nsec [ 79.068519] acpi/hmat: Initiator-Target[0-3]:50 nsec [ 79.130559] acpi/hmat: Initiator-Target[1-0]:0 nsec [ 79.191538] acpi/hmat: Initiator-Target[1-1]:0 nsec [ 79.252526] acpi/hmat: Initiator-Target[1-2]:50 nsec [ 79.314562] acpi/hmat: Initiator-Target[1-3]:50 nsec [ 79.376603] acpi/hmat: Initiator-Target[2-0]:50 nsec [ 79.438633] acpi/hmat: Initiator-Target[2-1]:50 nsec [ 79.500671] acpi/hmat: Initiator-Target[2-2]:0 nsec [ 79.561656] acpi/hmat: Initiator-Target[2-3]:0 nsec [ 79.622646] acpi/hmat: Initiator-Target[3-0]:50 nsec [ 79.684679] acpi/hmat: Initiator-Target[3-1]:50 nsec [ 79.746713] acpi/hmat: Initiator-Target[3-2]:0 nsec [ 79.813997] acpi/hmat: Initiator-Target[3-3]:0 nsec [ 79.881258] acpi/hmat: HMAT: Locality: Flags:00 Type:Access Bandwidth Initiator Domains:4 Target Domains:4 Base:10 [ 80.012901] acpi/hmat: Initiator-Target[0-0]:85280 MB/s [ 80.084776] acpi/hmat: Initiator-Target[0-1]:85280 MB/s [ 80.156414] acpi/hmat: Initiator-Target[0-2]:85280 MB/s [ 80.227848] acpi/hmat: Initiator-Target[0-3]:85280 MB/s [ 80.299146] acpi/hmat: Initiator-Target[1-0]:85280 MB/s [ 80.370338] acpi/hmat: Initiator-Target[1-1]:85280 MB/s [ 80.441287] acpi/hmat: Initiator-Target[1-2]:85280 MB/s [ 80.512039] acpi/hmat: Initiator-Target[1-3]:85280 MB/s [ 80.582632] acpi/hmat: Initiator-Target[2-0]:85280 MB/s [ 80.653122] acpi/hmat: Initiator-Target[2-1]:85280 MB/s [ 80.723383] acpi/hmat: Initiator-Target[2-2]:85280 MB/s [ 80.793429] acpi/hmat: Initiator-Target[2-3]:85280 MB/s [ 80.863346] acpi/hmat: Initiator-Target[3-0]:85280 MB/s [ 80.933140] acpi/hmat: Initiator-Target[3-1]:85280 MB/s [ 81.002712] acpi/hmat: Initiator-Target[3-2]:85280 MB/s [ 81.072066] acpi/hmat: Initiator-Target[3-3]:85280 MB/s [ 81.141393] ERST: Error Record Serialization Table (ERST) support is initialized. [ 81.235895] pstore: Registered erst as persistent store backend [ 81.311696] EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 81.431169] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 81.525165] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 81.625996] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 81.739671] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 81.833575] Non-volatile memory driver v1.3 [ 81.889857] tpm_tis STM7364:00: 2.0 TPM (device-id 0x0, rev-id 78) [ 81.998829] rdac: device handler registered [ 82.053596] hp_sw: device handler registered [ 82.109334] emc: device handler registered [ 82.163306] alua: device handler registered [ 82.218254] libphy: Fixed MDIO Bus: probed [ 82.272166] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 82.355166] ehci-pci: EHCI PCI platform driver [ 82.413793] ehci-pci 0000:01:00.4: EHCI Host Controller [ 82.481436] ehci-pci 0000:01:00.4: new USB bus registered, assigned bus number 1 [ 82.575352] ehci-pci 0000:01:00.4: irq 150, io mem 0x99b9c000 [ 82.656040] ehci-pci 0000:01:00.4: USB 2.0 started, EHCI 1.00 [ 82.730121] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 82.834858] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 82.927155] usb usb1: Product: EHCI Host Controller [ 82.991230] usb usb1: Manufacturer: Linux 4.18.0-305.62.1.el8_4.x86_64 ehci_hcd [ 83.084945] usb usb1: SerialNumber: 0000:01:00.4 [ 83.146422] hub 1-0:1.0: USB hub found [ 83.197250] hub 1-0:1.0: 8 ports detected [ 83.251638] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 83.332111] ohci-pci: OHCI PCI platform driver [ 83.391686] uhci_hcd: USB Universal Host Controller Interface driver [ 83.474932] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 83.544180] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 83.639319] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 83.725268] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 83.841893] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 83.930500] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 84.036999] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 84.131068] usb usb2: Product: xHCI Host Controller [ 84.196925] usb usb2: Manufacturer: Linux 4.18.0-305.62.1.el8_4.x86_64 xhci-hcd [ 84.292363] usb usb2: SerialNumber: 0000:00:14.0 [ 84.355613] hub 2-0:1.0: USB hub found [ 84.408244] hub 2-0:1.0: 16 ports detected [ 84.465492] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 84.536329] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 84.633410] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 84.716947] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 84.824874] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 84.920355] usb usb3: Product: xHCI Host Controller [ 84.987419] usb usb3: Manufacturer: Linux 4.18.0-305.62.1.el8_4.x86_64 xhci-hcd [ 85.083889] usb usb3: SerialNumber: 0000:00:14.0 [ 85.147920] hub 3-0:1.0: USB hub found [ 85.201028] hub 3-0:1.0: 10 ports detected [ 85.258665] usbcore: registered new interface driver usbserial_generic [ 85.260575] usb 1-1: New USB device found, idVendor=03f0, idProduct=7029, bcdDevice= 0.02 [ 85.345262] usbserial: USB Serial support registered for generic [ 85.452003] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 85.452004] usb 1-1: Product: Virtual Keyboard [ 85.452005] usb 1-1: Manufacturer: iLO [ 85.504041] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 85.532583] i8042: PNP: No PS/2 controller found. [ 85.678040] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 85.688455] i8042: Probing ports directly. [ 86.102569] usb 2-3: New USB device found, idVendor=0424, idProduct=2660, bcdDevice= 8.01 [ 86.209681] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 86.231292] i8042: Can't read CTR while initializing i8042 [ 86.304947] hub 2-3:1.0: USB hub found [ 86.378870] i8042: probe of i8042 failed with error -5 [ 86.432641] hub 2-3:1.0: 2 ports detected [ 86.503163] mousedev: PS/2 mouse device common for all mice [ 86.562040] usb 1-2: New USB device found, idVendor=03f0, idProduct=2227, bcdDevice= 0.01 [ 86.635476] rtc_cmos 00:00: RTC can wake from S4 [ 86.742419] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 86.742420] usb 1-2: Product: Virtual CD-ROM [ 86.742420] usb 1-2: Manufacturer: iLO [ 87.015458] rtc_cmos 00:00: registered as rtc0 [ 87.077530] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 87.178495] intel_pstate: Intel P-state driver initializing [ 87.272123] EFI Variables Facility v0.08 2004-May-17 [ 87.343823] hid: raw HID events driver (C) Jiri Kosina [ 87.415416] input: iLO Virtual Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:01:00.4/usb1/1-1/1-1:1.0/0003:03F0:7029.0001/input/input1 [ 87.635595] hid-generic 0003:03F0:7029.0001: input,hidraw0: USB HID v1.10 Keyboard [iLO Virtual Keyboard] on usb-0000:01:00.4-1/input0 [ 87.800702] input: iLO Virtual Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:01:00.4/usb1/1-1/1-1:1.1/0003:03F0:7029.0002/input/input2 [ 87.970258] hid-generic 0003:03F0:7029.0002: input,hidraw1: USB HID v1.10 Mouse [iLO Virtual Keyboard] on usb-0000:01:00.4-1/input1 [ 88.132654] usbcore: registered new interface driver usbhid [ 88.209795] usbhid: USB HID core driver [ 88.266246] drop_monitor: Initializing network drop monitor service [ 88.351994] Initializing XFRM netlink socket [ 88.413607] NET: Registered protocol family 10 [ 88.478068] Segment Routing with IPv6 [ 88.532073] NET: Registered protocol family 17 [ 88.595757] mpls_gso: MPLS GSO support [ 88.685692] microcode: sig=0x606a6, pf=0x1, revision=0xd000363 [ 88.773915] microcode: Microcode Update Driver: v2.2. [ 88.785510] resctrl: L3 allocation detected [ 88.916333] resctrl: MB allocation detected [ 88.976436] resctrl: L3 monitoring detected [ 89.036399] AVX2 version of gcm_enc/dec engaged. [ 89.101504] AES CTR mode by8 optimization enabled [ 89.445617] sched_clock: Marking stable (89445602139, 0)->(141892244317, -52446642178) [ 89.551503] registered taskstats version 1 [ 89.610272] Loading compiled-in X.509 certificates [ 89.723440] Loaded X.509 cert 'Red Hat Enterprise Linux kernel signing key: 50d7cbcde40d8e71bbdeeb056f556f1e4cb31eba' [ 89.861542] Loaded X.509 cert 'Red Hat Enterprise Linux Driver Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80' [ 90.020986] Loaded X.509 cert 'Red Hat Enterprise Linux kpatch signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8' [ 90.159277] zswap: loaded using pool lzo/zbud [ 90.222495] page_owner is disabled [ 90.324969] Key type big_key registered [ 90.407061] Key type trusted registered [ 90.489011] Key type encrypted registered [ 90.547484] integrity: Loading X.509 certificate: UEFI:db [ 90.622366] integrity: Loaded X.509 cert 'Hewlett Packard Enterprise Company: HPE UEFI Secure Boot 2016 DB Key: a068bfe686eec826df935e3bb1cd36f1c2772560' [ 90.808222] integrity: Loading X.509 certificate: UEFI:db [ 90.883316] integrity: Loaded X.509 cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec' [ 91.056920] integrity: Loading X.509 certificate: UEFI:db [ 91.132382] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 91.273160] integrity: Loading X.509 certificate: UEFI:db [ 91.348922] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 91.493077] integrity: Loading X.509 certificate: UEFI:db [ 91.569166] integrity: Loaded X.509 cert 'VMware, Inc.: VMware Secure Boot Signing: 04597f3e1ffb240bba0ff0f05d5eb05f3e15f6d7' [ 91.717582] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 91.816892] integrity: Loaded X.509 cert 'Red Hat Secure Boot CA 5: cc6fa5e72868ba494e939bbd680b9144769a9f8f' [ 91.947495] ima: Allocated hash algorithm: sha256 [ 92.031983] evm: Initialising EVM extended attributes: [ 92.032033] audit: type=1807 audit(1664546135.030:2): action=measure func=KEXEC_KERNEL_CHECK res=1 [ 92.104485] evm: security.selinux [ 92.223140] audit: type=1807 audit(1664546135.030:3): action=measure func=MODULE_CHECK res=1 [ 92.273337] evm: security.ima [ 92.273337] evm: security.capability [ 92.273338] evm: HMAC attrs: 0x1 [ 92.274250] rtc_cmos 00:00: setting system clock to 2022-09-30 13:56:27 UTC (1664546187) [ 92.640704] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7 [ 92.748389] Freeing unused decrypted memory: 2036K [ 92.817048] Freeing unused kernel memory: 2480K [ 92.883032] Write protecting the kernel read-only data: 22528k [ 92.964964] Freeing unused kernel memory: 2012K [ 93.030325] Freeing unused kernel memory: 476K [ 93.134383] systemd[1]: systemd 239 (239-45.el8_4.12) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 93.461207] systemd[1]: Detected architecture x86-64. [ 93.533063] systemd[1]: Running in initial RAM disk. Welcome to Red Hat Enterprise Linux CoreOS 410.84.202209272044-0 (Ootpa) dracut-049-137.git20220131.el8_4.1 (Initramfs)! [ 93.759094] systemd[1]: No hostname configured. [ 93.824596] systemd[1]: Set hostname to . [ 93.895223] systemd[1]: Initializing machine ID from random generator. [ 94.068629] systemd[1]: Started Forward Password Requests to Clevis Directory Watch. [ OK ] Started Forward Password Requests to Clevis Directory Watch. [ 94.261207] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 94.456119] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 94.566121] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ OK ] Listening on udev Control Socket. [ OK ] Listening on Open-iSCSI iscsid Socket. [ OK ] Reached target Timers. [ OK ] Listening on Open-iSCSI iscsiuio Socket. [ OK ] Listening on udev Kernel Socket. [ OK ] Reached target Slices. [ OK ] Listening on Journal Socket. Starting Create list of required st…ce nodes for the current kernel... Starting Afterburn Initrd Setup Network Kernel Arguments... [ 95.278719] Loading iSCSI transport class v2.0-870. [ OK ] Started CoreOS Tear Down Initramfs. Starting CoreOS: Touch /run/agetty.reload... Starting Load Kernel Modules... [ 95.519100] fuse: init (API version 7.31) Starting CoreOS Ignition User Config Setup... [ OK ] Listening on Journal Socket (/dev/log). Starting Journal Service... [ OK ] Reached target Sockets. [ OK 95.807954] systemd-modules-load[1294]: Inserted module 'fuse' 0m] Started Mems[ 95.899157] systemd-modules-load[1294]: Module 'msr' is builtin track Anylazing [ 95.987180] coreos-ignition-setup-user[1295]: File /config.ign does not exist.. Skipping copy Service. Starting Setup Virtual Console... [ OK ] Reached target Local Encrypted Volumes. [ OK ] Started iSCSI UserSpace I/O driver. [ OK ] Started Journal Service. [ OK 96.342130] systemd[1]: Started Create list of required static device nodes for the current kernel. 0m] Started Create list of required sta…vice nodes for the current kernel. [ 96.552282] systemd[1]: afterburn-network-kargs.service: Succeeded. [ 96.638313] systemd[1]: Started Afterburn Initrd Setup Network Kernel Arguments. [ OK ] Started Afterburn Initrd Setup Network Kernel Arguments. [ OK 96.822984] systemd[1]: Started CoreOS: Touch /run/agetty.reload. 0m] Started CoreOS: Touch /run/agetty.reload. [ 96.963788] systemd[1]: Started Load Kernel Modules. [ OK ] Started Load Kernel Modules. [ OK 97.079386] systemd[1]: Started CoreOS Ignition User Config Setup. 0m] Started CoreOS Ignition User Config Setup. [ 97.221297] systemd[1]: memstrack.service: Succeeded. [ OK ] Started Setup Virtual Console. Starting dracut ask for additional cmdline parameters... Startin[ OK ] Started dracut ask for additional cmdline parameters. [ 97.520738] systemd[1]: Started Apply Kernel Variables. [ OK ] Started Apply Kernel Variables. [ 97.642346] systemd[1]: Started Create Static Device Nodes in /dev. [ OK ] Started Create Static Device Nodes in /dev. Startin[ 97.788431] systemd[1]: Starting sysroot-xfs-ephemeral-mkfs.service... g sysroot-xfs-ephemeral-mkfs.service... [ 97.929079] systemd[1]: Starting dracut cmdline hook... Startin[ 98.001306] dracut-cmdline[1341]: dracut-410.84.202209272044-0 dracut-049-137.git20220131.el8_4.1 g dracut cmdline[ 98.125190] dracut-cmdline[1341]: Using kernel command line parameters: ip=auto BOOT_IMAGE=/images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044-0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 hook... [ 98.424326] iscsi: registered transport (tcp) [ 98.450560] mkfs.xfs[1439]: meta-data=/run/ephemeral.xfsloop isize=512 agcount=4, agsize=16501097 blks [ 98.610913] mkfs.xfs[1439]: = sectsz=512 attr=2, projid32bit=1 [ 98.610926] mkfs.xfs[1439]: = crc=1 finobt=1, sparse=1, rmapbt=0 [ OK 98.610933] mkfs.xfs[1439]: = reflink=1 0m] Started sysr[ 98.610939] mkfs.xfs[1439]: data = bsize=4096 blocks=66004388, imaxpct=25 oot-xfs-ephemera[ 98.610944] mkfs.xfs[1439]: = sunit=0 swidth=0 blks [ 98.610952] mkfs.xfs[1439]: naming =version 2 bsize=4096 ascii-ci=0, ftype=1 [ 98.610958] mkfs.xfs[1439]: log =internal log bsize=4096 blocks=32228, version=2 [ 98.610963] mkfs.xfs[1439]: = sectsz=512 sunit=0 blks, lazy-count=1 [ 98.610974] mkfs.xfs[1439]: realtime =none extsz=4096 blocks=0, rtextents=0 Mountin[ 99.652885] systemd[1]: Started sysroot-xfs-ephemeral-mkfs.service. g /run/ephemeral[ 99.754181] systemd[1]: Mounting /run/ephemeral... ... [ 99.754491] loop: module loaded [ 99.876400] iscsi: registered transport (qla4xxx) [ 99.941942] QLogic iSCSI HBA Driver [ 99.998146] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015) [ 100.139732] Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015) [ 100.224071] iscsi: registered transport (cxgb4i) [ 100.294795] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 100.374562] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 100.467211] iscsi: registered transport (bnx2i) [ 100.540345] SGI XFS with ACLs, security attributes, quota, no debug enabled [ 100.636714] XFS (loop0): Mounting V5 Filesystem [ 100.703343] XFS (loop0): Ending clean mount [ 100.763284] iscsi: registered transport (be2iscsi) [ 100.765416] systemd[1]: Mounted /run/ephemeral. [ 100.829703] In beiscsi_module_init, tt=00000000e91bb007 [ OK ] Mounted /run/ephemeral. [ 101.099206] systemd[1]: Started dracut cmdline hook. [ OK ] Started dracut cmdline hook. Startin[ 101.214916] systemd[1]: Starting dracut pre-udev hook... g dracut pre-ude[ 101.305366] device-mapper: uevent: version 1.0.3 v hook... [ 101.376980] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 101.516993] systemd[1]: Started dracut pre-udev hook. [ OK ] Started dracut pre-udev hook. Startin[ 101.634250] systemd[1]: Starting udev Kernel Device Manager... g udev Kernel Device Manager... [ OK 101.782557] systemd[1]: Started udev Kernel Device Manager. 0m] Started udev Kernel Device Manager. Startin[ 101.912300] systemd[1]: Starting dracut pre-trigger hook... g dracut pre-tri[ 102.004963] dracut-pre-trigger[1647]: rd.md=0: removing MD RAID activation gger hook... [ OK 102.111871] systemd[1]: Started dracut pre-trigger hook. 0m] Started dracut pre-trigger hook. Startin[ 102.235484] systemd[1]: Starting udev Coldplug all Devices... g udev Coldplug all Devices... Mountin[ 102.360812] systemd[1]: Mounting Kernel Configuration File System... g Kernel Configu[ 102.468620] usb-storage 1-2:1.0: USB Mass Storage device detected ration File Syst[ 102.553650] scsi host0: usb-storage 1-2:1.0 em... [ 102.620528] usbcore: registered new interface driver usb-storage [ 102.621084] systemd[1]: Started udev Coldplug all Devices. [ OK 102.776889] systemd-udevd[1846]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. 0m] Started udev[ 102.776912] megasas: 07.714.04.00-rh1 Coldplug all De[ 102.996567] megaraid_sas 0000:0f:00.0: FW now in Ready state vices. [ 103.080386] megaraid_sas 0000:0f:00.0: 63 bit DMA mask and 63 bit consistent mask [ 103.171363] systemd[1]: Mounted Kernel Configuration File System. [ 103.179290] megaraid_sas 0000:0f:00.0: firmware supports msix : (128) [ OK 103.347773] megaraid_sas 0000:0f:00.0: requested/available msix 120/120 0m] Mounted Kern[ 103.451516] megaraid_sas 0000:0f:00.0: current msix/online cpus : (120/112) el Configuration[ 103.552377] megaraid_sas 0000:0f:00.0: RDPQ mode : (enabled) File System. [ 103.637460] megaraid_sas 0000:0f:00.0: Current firmware supports maximum commands: 5101 LDIO threshold: 0 [ 103.748491] scsi 0:0:0:0: CD-ROM iLO Virtual DVD-ROM PQ: 0 ANSI: 0 CCS [ 103.766088] systemd[1]: Starting udev Wait for Complete Device Initialization... [ 103.852417] megaraid_sas 0000:0f:00.0: Performance mode :Balanced (latency index = 8) [ 104.081095] megaraid_sas 0000:0f:00.0: FW supports sync cache : Yes [ 104.081098] megaraid_sas 0000:0f:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009 [ 104.169067] megaraid_sas 0000:0f:00.0: FW supports atomic descriptor : Yes Startin[ 104.383493] QLogic FastLinQ 4xxxx Core Module qed 8.37.0.20 g udev Wait for [ 104.404130] megaraid_sas 0000:0f:00.0: FW provided supportMaxExtLDs: 1 max_lds: 240 Complete Device [ 104.576048] megaraid_sas 0000:0f:00.0: controller type : MR(4096MB) Initialization..[ 104.668508] megaraid_sas 0000:0f:00.0: Online Controller Reset(OCR) : Enabled . [ 104.771235] megaraid_sas 0000:0f:00.0: Secure JBOD support : Yes [ 104.852165] megaraid_sas 0000:0f:00.0: NVMe passthru support : Yes [ 104.935120] megaraid_sas 0000:0f:00.0: FW provided TM TaskAbort/Reset timeout : 6 secs/60 secs [ 105.047536] megaraid_sas 0000:0f:00.0: JBOD sequence map support : Yes [ 105.134709] megaraid_sas 0000:0f:00.0: PCI Lane Margining support : Yes [ 105.225152] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.37.0.20 [ 105.225152] [ 105.225174] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 105.245373] megaraid_sas 0000:0f:00.0: NVME page size : (4096) [ 105.246587] megaraid_sas 0000:0f:00.0: megasas_enable_intr_fusion is called outbound_intr_mask:0x40000000 [ 105.246588] megaraid_sas 0000:0f:00.0: INIT adapter done [ 105.258020] megaraid_sas 0000:0f:00.0: Snap dump wait time : 15 [ 105.258026] megaraid_sas 0000:0f:00.0: pci id : (0x1000)/(0x10e2)/(0x1590)/(0x0293) [ 105.258029] megaraid_sas 0000:0f:00.0: unevenspan support : no [ 105.258031] megaraid_sas 0000:0f:00.0: firmware crash dump : no [ 105.258033] megaraid_sas 0000:0f:00.0: JBOD sequence map : enabled [ 105.258375] megaraid_sas 0000:0f:00.0: Max firmware commands: 5100 shared with nr_hw_queues = 112 [ 105.258379] scsi host1: Avago SAS based MegaRAID driver [ 105.595514] qede 48:00.00: Storm FW 8.42.2.0, Management FW 8.55.43.0 [MBI 8.55.14] [eth0] [ 106.378901] scsi 1:1:124:0: Enclosure BROADCOM VirtualSES 03 PQ: 0 ANSI: 7 [ 106.524954] sr 0:0:0:0: [sr0] scsi3-mmc drive: 12x/12x cd/rw tray [ 106.589331] qede 48:00.01: Storm FW 8.42.2.0, Management FW 8.55.43.0 [MBI 8.55.14] [eth1] [ 106.607016] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 106.788301] systemd-udevd[1720]: Using default interface naming scheme 'rhel-8.0'. [ 106.791575] qede 0000:48:00.0 ens10f0: renamed from eth0 [ 106.888748] systemd-udevd[1836]: Using default interface naming scheme 'rhel-8.0'. [ 107.061729] systemd-udevd[1720]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 107.203141] systemd-udevd[1836]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 107.346532] qede 0000:48:00.1 ens10f1: renamed from eth1 [ 107.450875] scsi 1:3:107:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 [ 107.489402] qedr: discovered and registered 2 RDMA funcs [ 107.560807] scsi 1:3:108:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 [ 107.742579] scsi 1:3:109:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 [ 107.821125] systemd-udevd[1921]: Using default interface naming scheme 'rhel-8.0'. [ 107.852194] scsi 1:3:110:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 [ 107.951640] systemd[1]: Created slice system-rdma\x2dload\x2dmodules.slice. [ 108.061392] scsi 1:3:111:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 [ OK ] Created slice system-rdma\x2dload\x2dmodules[ 108.323662] scsi 1:1:124:0: Attached scsi generic sg1 type 13 .slice. [ 108.408524] scsi 1:3:107:0: Attached scsi generic sg2 type 0 [ 108.477566] systemd[1]: Starting Load RDMA modules from /etc/rdma/modules/roce.conf... [ 108.486235] scsi 1:3:108:0: Attached scsi generic sg3 type 0 Startin[ 108.667785] scsi 1:3:109:0: Attached scsi generic sg4 type 0 g Load RDMA modu[ 108.761833] scsi 1:3:110:0: Attached scsi generic sg5 type 0 les from /etc/rd[ 108.846750] scsi 1:3:111:0: Attached scsi generic sg6 type 0 ma/modules/roce.[ 108.933112] sd 1:3:107:0: [sda] 4939212288 512-byte logical blocks: (2.53 TB/2.30 TiB) conf... [ 108.933373] sd 1:3:108:0: [sdb] 4939212288 512-byte logical blocks: (2.53 TB/2.30 TiB) [ 109.043705] sd 1:3:107:0: [sda] 4096-byte physical blocks [ 109.043767] sd 1:3:110:0: [sdd] 4939212288 512-byte logical blocks: (2.53 TB/2.30 TiB) [ 109.043769] sd 1:3:110:0: [sdd] 4096-byte physical blocks [ 109.043787] sd 1:3:111:0: [sde] 1561722880 512-byte logical blocks: (800 GB/745 GiB) [ 109.043787] sd 1:3:109:0: [sdc] 4939212288 512-byte logical blocks: (2.53 TB/2.30 TiB) [ 109.043789] sd 1:3:109:0: [sdc] 4096-byte physical blocks [ 109.141228] systemd[1]: Starting Load RDMA modules from /etc/rdma/modules/rdma.conf... [ 109.148574] sd 1:3:108:0: [sdb] 4096-byte physical blocks [ 109.148649] sd 1:3:111:0: [sde] Write Protect is off [ 109.148650] sd 1:3:110:0: [sdd] Write Protect is off [ 109.148670] sd 1:3:109:0: [sdc] Write Protect is off [ 109.325946] sd 1:3:107:0: [sda] Write Protect is off [ 109.326012] sd 1:3:111:0: [sde] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 109.326067] sd 1:3:109:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 109.326070] sd 1:3:110:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 109.399485] sd 1:3:107:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 109.399826] sd 1:3:109:0: [sdc] Optimal transfer size 196608 bytes [ 109.399877] sd 1:3:110:0: [sdd] Optimal transfer size 196608 bytes [ 109.399964] sd 1:3:108:0: [sdb] Write Protect is off [ 109.400013] sd 1:3:108:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 109.401723] sd 1:3:108:0: [sdb] Optimal transfer size 196608 bytes [ 109.412089] sd 1:3:108:0: [sdb] Attached SCSI disk [ 109.412090] sd 1:3:109:0: [sdc] Attached SCSI disk [ 109.412117] sd 1:3:110:0: [sdd] Attached SCSI disk [ 109.511355] sd 1:3:111:0: [sde] Optimal transfer size 65536 bytes [ 109.615062] sd 1:3:107:0: [sda] Optimal transfer size 196608 bytes [ 109.680099] sde: sde1 sde2 sde3 sde4 [ 109.787073] sd 1:3:107:0: [sda] Attached SCSI disk [ 110.777125] sd 1:3:111:0: [sde] Attached SCSI disk [ 111.517757] iscsi: registered transport (iser) Startin[ 111.642053] systemd-modules-load[1996]: Inserted module 'ib_iser' g Load RDMA modu[ 111.739457] Rounding down aligned max_sectors from 4294967295 to 4294967288 les from /etc/rd[ 111.838991] db_root: cannot open: /etc/target ma/modules/rdma.conf... [ 111.925251] systemd-modules-load[1996]: Inserted module 'ib_isert' [ 112.009132] systemd[1]: Started udev Wait for Complete Device Initialization. [ OK 112.102597] systemd-modules-load[1996]: Inserted module 'ib_srpt' 0m] Started udev[ 112.193371] systemd-modules-load[1996]: Inserted module 'rdma_ucm' Wait for Comple[ 112.282980] systemd-modules-load[1996]: Failed to find module 'xprtrdma' te Device Initia[ 112.380549] systemd-modules-load[1996]: Failed to find module 'svcrdma' lization. [ OK 112.483902] systemd[1]: Started Load RDMA modules from /etc/rdma/modules/roce.conf. 0m] Started Load RDMA modules from /etc/rdma/modules/roce.conf. [ 112.662237] systemd[1]: rdma-load-modules@rdma.service: Main process exited, code=exited, status=1/FAILURE [ 112.784836] systemd[1]: rdma-load-modules@rdma.service: Failed with result 'exit-code'. [ 112.784855] systemd[1]: Failed to start Load RDMA modules from /etc/rdma/modules/rdma.conf. [FAILED] Failed to start Load RDMA modules from /etc/rdma/modules/rdma.conf. See 'systemctl status rdma-load-modules@rdma.service' for details. [ OK 113.168285] systemd[1]: Found device Virtual_DVD-ROM rhcos-410.84.202209272044-0. 0m] Found device Virtual_DVD-ROM rhcos-410.84.202209272044-0. [ OK 113.379376] systemd[1]: Reached target Network (Pre). 0m] Reached target Network (Pre). [ OK 113.495187] systemd[1]: Reached target RDMA Hardware. 0m] Reached target RDMA Hardware. Startin[ 113.612395] systemd[1]: Starting Device-Mapper Multipath Device Controller... g Device-Mapper Multipath Device Controller... [ OK 113.767545] systemd[1]: Started Device-Mapper Multipath Device Controller. 0m] Started Devi[ 113.873858] multipathd[2111]: --------start up-------- ce-Mapper Multip[ 113.952481] multipathd[2111]: read /etc/multipath.conf ath Device Contr[ 114.031191] multipathd[2111]: /etc/multipath.conf does not exist, blacklisting all devices. oller. [ 114.148885] multipathd[2111]: You can run "/sbin/mpathconf --enable" to create [ 114.244573] multipathd[2111]: /etc/multipath.conf. See man mpathconf(8) for more details [ 114.244581] multipathd[2111]: path checkers start up [ OK 114.244589] multipathd[2111]: /etc/multipath.conf does not exist, blacklisting all devices. 0m] Reached targ[ 114.244597] multipathd[2111]: You can run "/sbin/mpathconf --enable" to create et Local File Sy[ 114.244605] multipathd[2111]: /etc/multipath.conf. See man mpathconf(8) for more details stems (Pre). [ 114.244696] systemd[1]: Reached target Local File Systems (Pre). [ 114.838942] systemd[1]: Reached target Local File Systems. [ OK ] Reached target Local File Systems. Startin[ 114.974358] systemd[1]: Starting Create Volatile Files and Directories... g Create Volatile Files and Directories... Startin[ 115.120785] systemd[1]: Starting Open-iSCSI... [ 115.198206] iscsid[2120]: iscsid: can't open InitiatorName configuration file /etc/iscsi/initiatorname.iscsi [ 115.333897] iscsid[2120]: iscsid: Warning: InitiatorName file /etc/iscsi/initiatorname.iscsi does not exist or does not contain a properly formatted InitiatorName. If using software iscsi (iscsi_tcp or ib_iser) or partial offload (bnx2i or cxgbi iscsi), you may not be able to log into or discover targets. Please create a file /etc/iscsi/initiatorname.iscsi that contains a sting with the format: InitiatorName=iqn.yyyy-mm.[:identifier]. [ 115.333908] iscsid[2120]: Example: InitiatorName=iqn.2001-04.com.redhat:fc6. [ OK 115.333915] iscsid[2120]: If using hardware iscsi like qla4xxx this message can be ignored. 0m] Started Open[ 115.333924] iscsid[2120]: iscsid: can't open InitiatorAlias configuration file /etc/iscsi/initiatorname.iscsi -iSCSI. [ 115.334009] systemd[1]: Started Open-iSCSI. [ 116.262043] systemd[1]: Started Create Volatile Files and Directories. [ OK ] Started Create Volatile Files and Directories. [ OK 116.413952] systemd[1]: Reached target System Initialization. 0m] Reached target System Initialization. [ OK 116.547322] systemd[1]: Reached target Basic System. 0m] Reached target Basic System. Startin[ 116.662711] systemd[1]: Starting Ignition (fetch-offline)... g Ignition (fetc[ 116.756698] ignition[2121]: fetched base config from "system" h-offline)... [ 116.842857] ignition[2121]: Ignition 2.13.0 [ 116.909066] systemd[1]: Started Ignition (fetch-offline). [ OK 116.983286] ignition[2121]: Stage: fetch-offline 0m] Started Igni[ 117.055887] ignition[2121]: reading system config file "/usr/lib/ignition/base.d/00-core.ign" tion (fetch-offl[ 117.175672] ignition[2121]: no config dir at "/usr/lib/ignition/base.platform.d/metal" ine). [ 117.288052] ignition[2121]: no config URL provided [ 117.354929] systemd[1]: Starting Copy CoreOS Firstboot Networking Config... [ 117.354954] ignition[2121]: reading system config file "/usr/lib/ignition/user.ign" Startin[ 117.355059] coreos-copy-firstboot-network[2138]: info: no files to copy from /etc/coreos-firstboot-network; skipping g Copy CoreOS Fi[ 117.694044] ignition[2121]: no config at "/usr/lib/ignition/user.ign" rstboot Networki[ 117.788687] ignition[2121]: not a config (empty): provider config was empty, continuing with empty cache config ng Config... [ 117.927524] ignition[2121]: fetch-offline: fetch-offline passed [ 118.013639] systemd[1]: Starting RHCOS Check For Legacy LUKS Configuration... [ 118.013667] ignition[2121]: Ignition finished successfully Starting RHCOS Check For Legacy LUKS Configuration... [ OK 118.244348] systemd[1]: Started Copy CoreOS Firstboot Networking Config. 0m] Started Copy CoreOS Firstboot Networking Config. [ OK 118.400817] systemd[1]: Started RHCOS Check For Legacy LUKS Configuration. 0m] Started RHCOS Check For Legacy LUKS Configuration. Startin[ 118.562417] systemd[1]: Starting dracut initqueue hook... g dracut initqueue hook... Startin[ 118.677441] systemd[1]: Starting Ignition (kargs)... g Ignition (karg[ 118.763875] ignition[2153]: Ignition 2.13.0 s)... [ 118.831013] systemd[1]: Started dracut initqueue hook. [ OK 118.902680] ignition[2153]: Stage: kargs 0m] Started drac[ 118.966737] ignition[2153]: reading system config file "/usr/lib/ignition/base.d/00-core.ign" ut initqueue hoo[ 119.086665] ignition[2153]: no config dir at "/usr/lib/ignition/base.platform.d/metal" k. [ 119.199149] systemd[1]: Starting dracut pre-mount hook... Startin[ 119.274159] ignition[2153]: kargs: kargs passed g dracut pre-mou[ 119.345694] ignition[2153]: Ignition finished successfully nt hook... [ OK 119.432391] systemd[1]: Reached target Remote File Systems (Pre). 0m] Reached target Remote File Systems (Pre). [ OK 119.573296] systemd[1]: Reached target Remote File Systems. 0m] Reached target Remote File Systems. [ OK 119.702080] systemd[1]: Started Ignition (kargs). 0m] Started Ignition (kargs). [ OK 119.809814] systemd[1]: Started dracut pre-mount hook. 0m] Started dracut pre-mount hook. Startin[ 119.928528] systemd[1]: Starting Ignition (disks)... g Ignition (disk[ 120.014728] ignition[2175]: Ignition 2.13.0 s)... [ 120.081884] ignition[2175]: Stage: disks [ 120.138532] systemd[1]: Started Ignition (disks). [ 120.138552] ignition[2175]: reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ 120.138570] ignition[2175]: no config dir at "/usr/lib/ignition/base.platform.d/metal" [ 120.138578] ignition[2175]: disks: disks passed [ 120.138588] ignition[2175]: Ignition finished successfully [ OK ] Started Ignition (disks). [ OK 120.611127] systemd[1]: Reached target Initrd Root Device. 0m] Reached target Initrd Root Device. Startin[ 120.739019] systemd[1]: Starting run-media-iso-mount.service... g run-media-iso-mount.service... [ OK 121.061057] systemd[1]: Started run-media-iso-mount.service. 0m] Started run-media-iso-mount.service. Startin[ 121.194444] systemd[1]: Starting Persist osmet files (ISO)... g Persist osmet files (ISO)... Mountin[ 121.318014] systemd[1]: Mounting /sysroot... g /sysroot... [ 121.432557] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ OK 121.739498] systemd[1]: Mounted /sysroot. 0m] Mounted /sysroot. Startin[ 121.830621] systemd[1]: Starting OSTree Prepare OS/... g OSTree Prepare OS/... [ 122.004276] ostree-prepare-root[2213]: preparing sysroot at /sysroot [ 122.530105] ostree-prepare-root[2213]: Resolved OSTree target to: /sysroot/ostree/deploy/rhcos/deploy/2ef5f6072b5ae046e12dc2a6946792c51195a11339964bdebe00f6cd5ebbe26a.0 [ 122.728843] ostree-prepare-root[2213]: filesystem at /sysroot currently writable: 0 [ 122.830004] ostree-prepare-root[2213]: sysroot.readonly configuration value: 0 [ 122.925921] systemd[1]: sysroot-ostree-deploy-rhcos-deploy-2ef5f6072b5ae046e12dc2a6946792c51195a11339964bdebe00f6cd5ebbe26a.0.mount: Succeeded. [ 123.099260] systemd[1]: sysroot.tmp-usr.mount: Succeeded. [ 123.173427] systemd[1]: sysroot.tmp-boot.mount: Succeeded. [ 123.248515] systemd[1]: sysroot.tmp.mount: Succeeded. [ 123.318040] systemd[1]: proc-cmdline.mount: Succeeded. [ OK 123.394290] systemd[1]: Started OSTree Prepare OS/. 0m] Started OSTree Prepare OS/. Startin[ 123.505846] systemd[1]: Starting sysroot-xfs-ephemeral-setup.service... g sysroot-xfs-ephemeral-setup.service... [ OK 125.305567] systemd[1]: Started Persist osmet files (ISO). 0m] Started Persist osmet files (ISO). [ OK 127.291883] systemd[1]: Started sysroot-xfs-ephemeral-setup.service. 0m] Started sysroot-xfs-ephemeral-setup.service. [ 127.440517] systemd[1]: sysroot-etc.mount: Directory /sysroot/etc to mount over is not empty, mounting anyway. [ 127.569409] systemd[1]: Mounting /sysroot/etc... Mounting /sysroot/etc... Mountin[ 127.673370] systemd[1]: Mounting /sysroot/var... g /sysroot/var... [ 127.768690] systemd[1]: Mounted /sysroot/etc. [ OK ] Mounted /sysroot/etc. [ OK 127.868484] systemd[1]: Mounted /sysroot/var. 0m] Mounted /sysroot/var. Startin[ 127.969251] systemd[1]: Starting sysroot-relabel.service... g sysroot-relabel.service... [ OK 128.312225] systemd[1]: Started sysroot-relabel.service. 0m] Started sysroot-relabel.service. [ OK 128.434893] systemd[1]: Reached target Initrd Root File System. 0m] Reached target Initrd Root File System. Startin[ 128.574202] systemd[1]: Starting Ignition (mount)... g Ignition (moun[ 128.658542] ignition[2235]: INFO : Ignition 2.13.0 t)... [ 128.737059] ignition[2235]: INFO : Stage: mount [ 128.803283] ignition[2235]: INFO : reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ 128.803292] ignition[2235]: DEBUG : parsing config with SHA512: ff6a5153be363997e4d5d3ea8cc4048373a457c48c4a5b134a08a30aacd167c1e0f099f0bdf1e24c99ad180628cd02b767b863b5fe3a8fce3fe1886847eb8e2e [ OK 128.803300] ignition[2235]: INFO : no config dir at "/usr/lib/ignition/base.platform.d/metal" 0m] Started Igni[ 128.803307] ignition[2235]: INFO : mount: mount passed tion (mount). [ 128.803314] ignition[2235]: INFO : Ignition finished successfully [ 128.803352] systemd[1]: Started Ignition (mount). [ 129.508890] systemd[1]: Starting Populate OSTree /var... Startin[ 129.581480] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/lib from (null) to system_u:object_r:var_lib_t:s0 g Populate OSTre[ 129.730779] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/log from (null) to system_u:object_r:var_log_t:s0 e /var... [ 129.879652] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/home from (null) to system_u:object_r:home_root_t:s0 [ 130.026561] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/roothome from (null) to system_u:object_r:admin_home_t:s0 [ 130.184271] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/roothome/.bash_logout from (null) to system_u:object_r:admin_home_t:s0 [ 130.356643] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/roothome/.bash_profile from (null) to system_u:object_r:admin_home_t:s0 [ 130.531111] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/roothome/.bashrc from (null) to system_u:object_r:admin_home_t:s0 [ 130.700417] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/opt from (null) to system_u:object_r:var_t:s0 [ 130.838978] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/srv from (null) to system_u:object_r:var_t:s0 [ 130.839038] systemd[1]: Started Populate OSTree /var. [ OK 131.048844] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/usrlocal from (null) to system_u:object_r:var_t:s0 0m] Started Popu[ 131.199156] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/usrlocal/bin from (null) to system_u:object_r:bin_t:s0 late OSTree /var. [ 131.363506] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/usrlocal/etc from (null) to system_u:object_r:var_t:s0 [ 131.522246] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/usrlocal/games from (null) to system_u:object_r:var_t:s0 [ 131.522257] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/usrlocal/include from (null) to system_u:object_r:var_t:s0 Starting Ignition (file[ 131.522265] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/usrlocal/lib from (null) to system_u:object_r:var_t:s0 s)... [ 131.522274] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/usrlocal/man from (null) to system_u:object_r:var_t:s0 [ 131.522282] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/usrlocal/sbin from (null) to system_u:object_r:var_t:s0 [ 131.522291] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/usrlocal/share from (null) to system_u:object_r:var_t:s0 [ 131.522299] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/usrlocal/src from (null) to system_u:object_r:var_t:s0 [ 131.522353] systemd[1]: Starting Ignition (files)... [ 132.750574] ignition-ostree-populate-var[2247]: Relabeled /sysroot//var/mnt from (null) to system_u:object_r:var_t:s0 [ 132.893055] ignition[2278]: INFO : Ignition 2.13.0 [ 132.969371] ignition[2278]: INFO : Stage: files [ 133.042495] ignition[2278]: INFO : reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ 133.171426] ignition[2278]: DEBUG : parsing config with SHA512: ff6a5153be363997e4d5d3ea8cc4048373a457c48c4a5b134a08a30aacd167c1e0f099f0bdf1e24c99ad180628cd02b767b863b5fe3a8fce3fe1886847eb8e2e [ 133.411008] ignition[2278]: INFO : no config dir at "/usr/lib/ignition/base.platform.d/metal" [ 133.533056] ignition[2278]: INFO : files: ensureUsers: op(1): [started] creating or modifying user "core" [ 133.668569] ignition[2278]: DEBUG : files: ensureUsers: op(1): executing: "useradd" "--root" "/sysroot" "--create-home" "--password" "*" "--comment" "CoreOS Admin" "--groups" "adm,sudo,systemd-journal,wheel" "core" [ 134.948961] ignition[2278]: INFO : files: ensureUsers: op(1): [finished] creating or modifying user "core" [ 135.084808] ignition[2278]: INFO : files: createResultFile: createFiles: op(2): [started] writing file "/sysroot/etc/.ignition-result.json" [ 135.084817] ignition[2278]: INFO : files: createResultFile: createFiles: op(2): [finished] writing file "/sysroot/etc/.ignition-result.json" [ OK ] Started Igni[ 135.084824] ignition[2278]: INFO : files: op(3): [started] relabeling 15 patterns tion (files). [ 135.084831] ignition[2278]: DEBUG : files: op(3): executing: "setfiles" "-vF0" "-r" "/sysroot" "/sysroot/etc/selinux/targeted/contexts/files/file_contexts" "-f" "-" [ 135.785221] ignition[2278]: INFO : files: op(3): [finished] relabeling 15 patterns [ OK 135.896405] ignition[2278]: INFO : files: files passed 0m] Reached targ[ 135.979143] ignition[2278]: INFO : Ignition finished successfully et Ignition Comp[ 136.073471] systemd[1]: Started Ignition (files). lete. [ 136.146815] systemd[1]: Reached target Ignition Complete. Startin[ 136.226572] systemd[1]: Starting Reload Configuration from the Real Root... g Reload Configuration from the Real Root... [ 136.364503] systemd[1]: Reloading. Stoppin[ 136.538999] systemd[1]: Stopping Device-Mapper Multipath Device Controller... g Device-Mapper [ 136.656272] multipathd[2111]: exit (signal) Multipath Device[ 136.723284] multipathd[2111]: --------shut down------- Controller... [ 136.805702] systemd[1]: multipathd.service: Succeeded. [ 136.881604] systemd[1]: Stopped Device-Mapper Multipath Device Controller. [ OK ] Stopped Device-Mapper Multipath Device Controller. [ 137.057577] systemd[1]: initrd-parse-etc.service: Succeeded. [ 137.139448] systemd[1]: Started Reload Configuration from the Real Root. [ OK ] Started Reload Configuration from the Real Root. [ OK 137.295935] systemd[1]: Reached target Initrd File Systems. 0m] Reached target Initrd File Systems. [ OK 137.424291] systemd[1]: Reached target Initrd Default Target. 0m] Reached target Initrd Default Target. Startin[ 137.559061] systemd[1]: Starting dracut pre-pivot and cleanup hook... g dracut pre-piv[ 137.666254] dracut-pre-pivot[2411]: Sep 30 13:57:12 | /etc/multipath.conf does not exist, blacklisting all devices. ot and cleanup hook... [ 137.808884] dracut-pre-pivot[2411]: Sep 30 13:57:12 | /etc/multipath.conf does not exist, blacklisting all devices. [ 137.952193] dracut-pre-pivot[2411]: Sep 30 13:57:12 | You can run "/sbin/mpathconf --enable" to create [ OK ] Started dracut pre-pivot and cleanup hook. [ 138.076839] dracut-pre-pivot[2411]: Sep 30 13:57:12 | You can run "/sbin/mpathconf --enable" to create [ 138.247190] dracut-pre-pivot[2411]: Sep 30 13:57:12 | /etc/multipath.conf. See man mpathconf(8) for more details Starting Cleaning Up and Shutting Down Daemons... [ 138.382172] dracut-pre-pivot[2411]: Sep 30 13:57:12 | /etc/multipath.conf. See man mpathconf(8) for more details [ OK 138.559513] systemd[1]: Started dracut pre-pivot and cleanup hook. 0m] Stopped targ[ 138.662641] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... et Timers. [ 138.761116] systemd[1]: Stopped target Timers. [ 138.827031] systemd[1]: clevis-luks-askpass.path: Succeeded. [ OK 138.906587] systemd[1]: Stopped Forward Password Requests to Clevis Directory Watch. 0m] Stopped Forward Password Requests to Clevis Directory Watch. [ 139.077289] systemd[1]: dracut-pre-pivot.service: Succeeded. [ OK 139.156519] systemd[1]: Stopped dracut pre-pivot and cleanup hook. 0m] Stopped dracut pre-pivot and cleanup hook. [ OK 139.290236] systemd[1]: Stopped target Remote File Systems. 0m] Stopped target Remote File Systems. [ 139.418259] systemd[1]: dracut-pre-mount.service: Succeeded. [ 139.496948] systemd[1]: Stopped dracut pre-mount hook. [ OK ] Stopped dracut pre-mount hook. [ 139.624867] systemd[1]: coreos-liveiso-persist-osmet.service: Succeeded. [ 139.715823] systemd[1]: Stopped Persist osmet files (ISO). [ OK ] Stopped Persist osmet files (ISO). [ OK 139.853356] systemd[1]: Stopped target Remote File Systems (Pre). 0m] Stopped target Remote File Systems (Pre). [ 139.994287] systemd[1]: dracut-initqueue.service: Succeeded. [ OK 140.072434] systemd[1]: Stopped dracut initqueue hook. 0m] Stopped dracut initqueue hook. Stoppin[ 140.182462] systemd[1]: Stopping Open-iSCSI... [ 140.262231] iscsid[2120]: iscsid: iscsid shutting down. [ 140.341890] systemd[1]: Stopped target Initrd Default Target. [ OK ] Stopped target Initrd Default Target. [ OK 140.485310] systemd[1]: Stopped target Initrd Root Device. 0m] Stopped target Initrd Root Device. [ OK 140.612303] systemd[1]: Stopped target RDMA Hardware. 0m] Stopped target RDMA Hardware. [ 140.728807] systemd[1]: coreos-touch-run-agetty.service: Succeeded. [ 140.812989] systemd[1]: Stopped CoreOS: Touch /run/agetty.reload. [ OK ] Stopped CoreOS: Touch /run/agetty.reload. [ OK 140.962372] systemd[1]: Stopped target Ignition Complete. 0m] Stopped target Ignition Complete. [ 141.088574] systemd[1]: ignition-fetch-offline.service: Succeeded. [ 141.171040] systemd[1]: Stopped Ignition (fetch-offline). [ OK ] Stopped Ignition (fetch-offline). [ 141.294302] systemd[1]: coreos-ignition-setup-user.service: Succeeded. [ 141.380840] systemd[1]: Stopped CoreOS Ignition User Config Setup. [ OK ] Stopped CoreOS Ignition User Config Setup. [ OK 141.533241] systemd[1]: Stopped target Network (Pre). 0m] Stopped target Network (Pre). [ 141.649564] systemd[1]: ignition-files.service: Succeeded. [ 141.723084] systemd[1]: Stopped Ignition (files). [ OK ] Stopped Ignition (files). [ OK 141.837544] systemd[1]: ignition-ostree-populate-var.service: Succeeded. 0m] Stopped Popu[ 141.942399] systemd[1]: Stopped Populate OSTree /var. late OSTree /var. Stoppin[ 142.034460] systemd[1]: Stopping Ignition (mount)... g Ignition (moun[ 142.118463] ignition[2442]: INFO : Ignition 2.13.0 t)... [ 142.197080] ignition[2442]: INFO : Stage: umount [ 142.264186] ignition[2442]: INFO : reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ 142.264194] ignition[2442]: DEBUG : parsing config with SHA512: ff6a5153be363997e4d5d3ea8cc4048373a457c48c4a5b134a08a30aacd167c1e0f099f0bdf1e24c99ad180628cd02b767b863b5fe3a8fce3fe1886847eb8e2e [ OK 142.264202] ignition[2442]: INFO : no config dir at "/usr/lib/ignition/base.platform.d/metal" 0m] Stopped Open[ 142.264208] ignition[2442]: INFO : umount: umount passed -iSCSI. [ 142.264216] ignition[2442]: INFO : Ignition finished successfully [ 142.264258] systemd[1]: iscsid.service: Succeeded. [ 142.965339] systemd[1]: Stopped Open-iSCSI. [ OK 143.023554] systemd[1]: ignition-mount.service: Succeeded. 0m] Stopped Igni[ 143.106582] systemd[1]: Stopped Ignition (mount). tion (mount). Stoppin[ 143.191733] systemd[1]: Stopping CoreOS Tear Down Initramfs... g CoreOS Tear Do[ 143.286541] coreos-teardown-initramfs[2458]: info: taking down network device: ens10f0 [ 143.398835] coreos-teardown-initramfs[2458]: RTNETLINK answers: Operation not supported [ 143.512171] coreos-teardown-initramfs[2458]: info: taking down network device: ens10f1 [ 143.512186] systemd[1]: ignition-disks.service: Succeeded. [ OK 143.512201] coreos-teardown-initramfs[2458]: RTNETLINK answers: Operation not supported 0m] Stopped Igni[ 143.512212] systemd[1]: Stopped Ignition (disks). tion (disks). [ 143.512228] coreos-teardown-initramfs[2458]: info: flushing all routing [ 143.512238] coreos-teardown-initramfs[2458]: info: no initramfs hostname information to propagate [ 144.086455] coreos-teardown-initramfs[2458]: info: no networking config is defined in the real root [ 144.086463] coreos-teardown-initramfs[2458]: info: skipping propagation of default networking configs [ OK 144.086546] systemd[1]: ignition-kargs.service: Succeeded. 0m] Stopped Igni[ 144.405814] systemd[1]: Stopped Ignition (kargs). tion (kargs). [ 144.489893] systemd[1]: coreos-copy-firstboot-network.service: Succeeded. [ 144.579648] systemd[1]: Stopped Copy CoreOS Firstboot Networking Config. [ OK ] Stopped Copy CoreOS Firstboot Networking Config. [ 144.743623] systemd[1]: rhcos-fail-boot-for-legacy-luks-config.service: Succeeded. [ 144.842987] systemd[1]: Stopped RHCOS Check For Legacy LUKS Configuration. [ OK ] Stopped RHCOS Check For Legacy LUKS Configuration. [ OK 145.004349] systemd[1]: Stopped target Basic System. 0m] Stopped target Basic System. [ OK 145.119473] systemd[1]: Stopped target System Initialization. 0m] Stopped target System Initialization. [ 145.253551] systemd[1]: systemd-sysctl.service: Succeeded. [ 145.327695] systemd[1]: Stopped Apply Kernel Variables. [ OK ] Stopped Apply Kernel Variables. [ OK 145.457210] systemd[1]: Stopped target Local Encrypted Volumes. 0m] Stopped target Local Encrypted Volumes. [ 145.593336] systemd[1]: systemd-tmpfiles-setup.service: Succeeded. [ OK 145.675945] systemd[1]: Stopped Create Volatile Files and Directories. 0m] Stopped Create Volatile Files and Directories. [ 145.821623] systemd[1]: rdma-load-modules@roce.service: Succeeded. [ 145.904284] systemd[1]: Stopped Load RDMA modules from /etc/rdma/modules/roce.conf. [ OK ] Stopped Load RDMA modules from /etc/rdma/modules/roce.conf. [ OK 146.091336] systemd[1]: Stopped target Local File Systems. 0m] Stopped target Local File Systems. [ OK 146.218516] systemd[1]: Stopped target Local File Systems (Pre). 0m] Stopped target Local File Systems (Pre). [ 146.358548] systemd[1]: systemd-modules-load.service: Succeeded. [ 146.439043] systemd[1]: Stopped Load Kernel Modules. [ OK ] Stopped Load Kernel Modules. [ 146.554294] systemd[1]: systemd-udev-settle.service: Succeeded. [ 146.633763] systemd[1]: Stopped udev Wait for Complete Device Initialization. [ OK ] Stopped udev Wait for Complete Device Initialization. [ 146.809615] systemd[1]: systemd-udev-trigger.service: Succeeded. [ 146.890188] systemd[1]: Stopped udev Coldplug all Devices. [ OK ] Stopped udev Coldplug all Devices. [ 147.026482] systemd[1]: dracut-pre-trigger.service: Succeeded. [ 147.104967] systemd[1]: Stopped dracut pre-trigger hook. [ OK ] Stopped dracut pre-trigger hook. Stoppin[ 147.235684] systemd[1]: Stopping udev Kernel Device Manager... g udev Kernel Device Manager... [ OK 147.358273] systemd[1]: Stopped target Swap. 0m] Stopped target Swap. [ OK 147.454287] systemd[1]: Stopped target Paths. 0m] Stopped target Paths. [ 147.554214] systemd[1]: systemd-ask-password-console.path: Succeeded. [ 147.639483] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK 147.831218] systemd[1]: Stopped target Slices. 0m] Stopped target Slices. [ OK 147.932282] systemd[1]: Stopped target Sockets. 0m] Stopped target Sockets. Stoppin[ 148.037399] systemd[1]: Stopping iSCSI UserSpace I/O driver... g iSCSI UserSpace I/O driver... [ 148.160367] systemd[1]: iscsid.socket: Succeeded. [ 148.224326] systemd[1]: Closed Open-iSCSI iscsid Socket. [ OK ] Closed Open-iSCSI iscsid Socket. [ 148.354962] systemd[1]: iscsiuio.service: Succeeded. [ 148.422023] systemd[1]: Stopped iSCSI UserSpace I/O driver. [ OK ] Stopped iSCSI UserSpace I/O driver. [ 148.550276] systemd[1]: systemd-udevd.service: Succeeded. [ 148.622486] systemd[1]: Stopped udev Kernel Device Manager. [ OK ] Stopped udev Kernel Device Manager. [ 148.758806] systemd[1]: initrd-cleanup.service: Succeeded. [ 148.832016] systemd[1]: Started Cleaning Up and Shutting Down Daemons. [ OK ] Started Cleaning Up and Shutting Down Daemons. [ 148.983725] systemd[1]: coreos-teardown-initramfs.service: Succeeded. [ 149.068330] systemd[1]: Stopped CoreOS Tear Down Initramfs. [ OK ] Stopped CoreOS Tear Down Initramfs. [ 149.205095] systemd[1]: systemd-tmpfiles-setup-dev.service: Succeeded. [ OK 149.290652] systemd[1]: Stopped Create Static Device Nodes in /dev. 0m] Stopped Create Static Device Nodes in /dev. [ 149.428827] systemd[1]: kmod-static-nodes.service: Succeeded. [ OK 149.504944] systemd[1]: Stopped Create list of required static device nodes for the current kernel. 0m] Stopped Create list of required sta…vice nodes for the current kernel. [ 149.708474] systemd[1]: dracut-pre-udev.service: Succeeded. [ 149.782528] systemd[1]: Stopped dracut pre-udev hook. [ OK ] Stopped dracut pre-udev hook. [ 149.905481] systemd[1]: dracut-cmdline.service: Succeeded. [ 149.978409] systemd[1]: Stopped dracut cmdline hook. [ OK ] Stopped dracut cmdline hook. [ 150.100505] systemd[1]: dracut-cmdline-ask.service: Succeeded. [ 150.177549] systemd[1]: Stopped dracut ask for additional cmdline parameters. [ OK ] Stopped dracut ask for additional cmdline parameters. [ 150.351452] systemd[1]: systemd-udevd-control.socket: Succeeded. [ 150.430651] systemd[1]: Closed udev Control Socket. [ OK ] Closed udev Control Socket. [ 150.541375] systemd[1]: systemd-udevd-kernel.socket: Succeeded. [ 150.619495] systemd[1]: Closed udev Kernel Socket. [ OK ] Closed udev Kernel Socket. Startin[ 150.738123] systemd[1]: Starting Cleanup udevd DB... g Cleanup udevd DB... [ 150.839386] systemd[1]: iscsiuio.socket: Succeeded. [ 150.904874] systemd[1]: Closed Open-iSCSI iscsiuio Socket. [ OK ] Closed Open-iSCSI iscsiuio Socket. [ 151.039377] systemd[1]: initrd-udevadm-cleanup-db.service: Succeeded. [ 151.123733] systemd[1]: Started Cleanup udevd DB. [ OK ] Started Cleanup udevd DB. [ OK 151.237830] systemd[1]: Reached target Switch Root. 0m] Reached target Switch Root. Startin[ 151.349003] systemd[1]: Starting Switch Root... g Switch Root... [ 151.444619] systemd[1]: Switching root. [ 151.497522] printk: systemd-journal: 6 output lines suppressed due to ratelimiting [ 151.759430] printk: systemd: 22 output lines suppressed due to ratelimiting [ 152.472013] audit: type=1404 audit(1664546247.695:4): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1 [ 152.732509] SELinux: policy capability network_peer_controls=1 [ 152.811033] SELinux: policy capability open_perms=1 [ 152.877962] SELinux: policy capability extended_socket_class=1 [ 152.956402] SELinux: policy capability always_check_network=0 [ 153.033762] SELinux: policy capability cgroup_seclabel=1 [ 153.105831] SELinux: policy capability nnp_nosuid_transition=1 [ 153.216905] audit: type=1403 audit(1664546248.440:5): auid=4294967295 ses=4294967295 lsm=selinux res=1 [ 153.217856] systemd[1]: Successfully loaded SELinux policy in 745.977ms. [ 153.454685] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 24.922ms. [ 153.550831] systemd[1]: systemd 239 (239-45.el8_4.12) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 153.870142] systemd[1]: Detected architecture x86-64. [ 153.939198] systemd[1]: Running with unpopulated /etc. Welcome to Red Hat Enterprise Linux CoreOS 410.84.202209272044-0 (Ootpa)! [ 154.117442] systemd[1]: Initializing machine ID from random generator. [ 155.853701] systemd[1]: Populated /etc with preset unit settings. [ 155.966327] systemd[1]: /usr/lib/systemd/system/bootupd.service:22: Unknown lvalue 'ProtectHostname' in section 'Service' [ 156.124070] systemd[1]: systemd-journald.service: Succeeded. [ 156.201300] systemd[1]: initrd-switch-root.service: Succeeded. [ 156.280354] systemd[1]: Stopped Switch Root. [ OK ] Stopped Switch Root. [ 156.385317] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart. [ 156.518964] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 156.518990] systemd[1]: Stopped Journal Service. [ OK ] Stopped Journal Service. [ 156.749948] systemd[1]: Starting Journal Service... Starting Journal Service... [ 156.860264] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 156.985521] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 157.178520] systemd[1]: sysroot-xfs-ephemeral-setup.service: Succeeded. [ 157.267085] systemd[1]: Stopped sysroot-xfs-ephemeral-setup.service. [ OK ] Stopped sysroot-xfs-ephemeral-setup.service. [ 157.424189] systemd[1]: Reached target Synchronize afterburn-sshkeys@.service template instances. [ OK ] Reached target Synchronize afterbur…hkeys@.service template instances. [ 157.641392] systemd[1]: Started Forward Password Requests to Clevis Directory Watch. [ OK ] Started Forward Password Requests to Clevis Directory Watch. [ 157.832364] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 157.992370] systemd[1]: run-media-iso-mount.service: Succeeded. [ 158.072767] systemd[1]: Stopped run-media-iso-mount.service. [ OK ] Stopped run-media-iso-mount.service. [ 158.211441] systemd[1]: sysroot-relabel.service: Succeeded. [ 158.287602] systemd[1]: Stopped sysroot-relabel.service. [ OK ] Stopped sysroot-relabel.service. [ 158.420553] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st…ce nodes for the current kernel... [ 158.634166] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 158.779019] systemd[1]: Starting Create System Users... Starting Create System Users... [ 158.896401] systemd[1]: sysroot-xfs-ephemeral-mkfs.service: Succeeded. [ 158.984383] systemd[1]: Stopped sysroot-xfs-ephemeral-mkfs.service. [ OK ] Stopped sysroot-xfs-ephemeral-mkfs.service. [ 159.139548] systemd[1]: Listening on LVM2 poll daemon socket. [ OK ] Listening on LVM2 poll daemon socket. [ 159.282638] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 159.425133] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 159.535793] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ OK ] Listening on Device-mapper event daemon FIFOs. [ 159.696122] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 159.835217] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 159.979434] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 160.096131] systemd[1]: Stopped target Switch Root. [ OK ] Stopped target Switch Root. [ 160.216072] systemd[1]: Stopped target Initrd File Systems. [ OK ] Stopped target Initrd File Systems. [ 160.353111] systemd[1]: Stopped target Initrd Root File System. [ OK ] Stopped target Initrd Root File System. [ 160.500135] systemd[1]: ostree-prepare-root.service: Succeeded. [ 160.580248] systemd[1]: Stopped OSTree Prepare OS/. [ OK ] Stopped OSTree Prepare OS/. [ 160.700211] systemd[1]: Reached target Local Encrypted Volumes (Pre). [ OK ] Reached target Local Encrypted Volumes (Pre). [ 160.858127] systemd[1]: Reached target Remote Encrypted Volumes. [ OK ] Reached target Remote Encrypted Volumes. [ 161.006069] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 161.111353] systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... [ 161.242883] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 161.373930] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... Starting Monitoring of LVM2 mirrors…ng dmeventd or progress polling... [ 161.595035] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 161.722873] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ 161.946178] systemd[1]: Created slice system-sshd\x2dkeygen.slice. [ OK ] Created slice system-sshd\x2dkeygen.slice. [ 162.096317] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 162.228888] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 162.360986] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... [ 162.491341] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 162.644402] systemd[1]: Starting Rebuild Hardware Database... Starting Rebuild Hardware Database... [ 162.772691] systemd[1]: Starting Load/Save Random Seed... Starting Load/Save Random Seed... [ 162.893622] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 163.079148] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 163.228534] systemd[1]: sysroot-var.mount: Succeeded. [ 163.297056] systemd[1]: sysroot-usr.mount: Succeeded. [ 163.365431] systemd[1]: sysroot-boot.mount: Succeeded. [ 163.434829] systemd[1]: sysroot-sysroot.mount: Succeeded. [ 163.507303] systemd[1]: sysroot-etc.mount: Succeeded. [ 163.575742] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Create System Users. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Load Kernel Modules. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd or progress polling. [ OK ] Mounted Kernel Debug File System. [ OK ] Started Rebuild Hardware Database. [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Coldplug all Devices. Starting udev Wait for Complete Device Initialization... Starting Apply Kernel Variables... Mounting FUSE Control File System... Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Started Apply Kernel Variables. [ OK ] Mounted FUSE Control File System. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Flush Journal to Persistent Storage. Starting Load RDMA modules from /etc/rdma/modules/roce.conf... Starting Load RDMA modules from /etc/rdma/modules/rdma.conf... Starting RDMA Node Description Daemon... [ OK ] Started Load RDMA modules from /etc/rdma/modules/roce.conf. [ OK ] Started RDMA Node Description Daemon. [ OK ] Started Load RDMA modules from /etc/rdma/modules/rdma.conf. [ OK ] Reached target RDMA Hardware. [ OK ] Reached target Network (Pre). [ OK ] Started udev Wait for Complete Device Initialization. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Run update-ca-trust... Starting Create Volatile Files and Directories... Starting Rebuild Journal Catalog... Starting Restore /run/initramfs on shutdown... Starting Rebuild Dynamic Linker Cache... [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Restore /run/initramfs on shutdown. Starting Security Auditing Service... Starting RHCOS Fix SELinux Labeling For /usr/local/sbin... [ OK ] Started Run update-ca-trust. [ OK ] Started RHCOS Fix SELinux Labeling For /usr/local/sbin. [ OK ] Started Security Auditing Service. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Dynamic Linker Cache. Starting Update is Completed... [ OK ] Started Update is Completed. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on bootupd.socket. [ OK ] Reached target Sockets. [ OK ] Started daily update of the root trust anchor for DNSSEC. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [ OK ] Started Monitor console-login-helpe…ue snippets directory for changes. [ OK ] Started OSTree Monitor Staged Deployment. [ OK ] Reached target Paths. [ OK ] Reached target Basic System. [ OK ] Started D-Bus System Message Bus. Starting Copy CoreOS Interactive Live MOTD... Starting CoreOS Generate iSCSI Initiator Name... Starting Network Manager... Starting OpenSSH ed25519 Server Key Generation... Starting Check if Ignition config is provided... Starting Load CPU microcode update... Starting OpenSSH ecdsa Server Key Generation... Starting Generation of shadow ID ranges for CRI-O... [ OK ] Started irqbalance daemon. Starting Generate console-login-helper-messages issue snippet... Starting OpenSSH rsa Server Key Generation... Starting System Security Services Daemon... Starting NTP client/server... [ OK ] Started Copy CoreOS Interactive Live MOTD. [ OK ] Started CoreOS Generate iSCSI Initiator Name. [ OK ] Started OpenSSH ed25519 Server Key Generation. [ OK ] Started Check if Ignition config is provided. [ OK ] Started OpenSSH ecdsa Server Key Generation. [ OK ] Started Load CPU microcode update. [ OK ] Started OpenSSH rsa Server Key Generation. [ OK ] Reached target sshd-keygen.target. Starting Generate SSH keys snippet …a console-login-helper-messages... [ OK ] Started NTP client/server. [ OK ] Started Generate SSH keys snippet f…via console-login-helper-messages. Starting Hostname Service... [ OK ] Started Network Manager. [ OK ] Started System Security Services Daemon. [ OK ] Started Generate console-login-helper-messages issue snippet. [ OK ] Started Hostname Service. Starting Network Manager Script Dispatcher Service... [ OK ] Reached target User and Group Name Lookups. Starting Login Service... [ OK ] Reached target Network. Starting OpenSSH server daemon... Starting Permit User Sessions... [ OK ] Started OpenSSH server daemon. [ OK ] Started Generation of shadow ID ranges for CRI-O. [ OK ] Started Permit User Sessions. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started Login Service. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. Red Hat Enterprise Linux CoreOS 410.84.202209272044-0 (Ootpa) 4.10 Ignition: ran on 2022/09/30 13:57:10 UTC (this boot) Ignition: no config provided by user SSH host key: SHA256:z//z4ycFEp9dVy/9nl38aSMHGwyi7umEf2p3T3NhLEU (ED25519) SSH host key: SHA256:xN7uCqGLvGwgpKj9Yf97IIM+1ixZ0KVbwuL94HM/GrM (ECDSA) SSH host key: SHA256:brHq5FrQGO/AVW/ntTSOQ7Xqje1cHtS9ZDdyWd563tQ (RSA) l core (automatic login) Last login: Fri Sep 30 13:57:54 on tty1 ########################################################################### Welcome to the CoreOS live environment. This system is running completely from memory, making it a good candidate for hardware discovery and installing persistently to disk. Here is an example of running an install to disk via coreos-installer: sudo coreos-installer install /dev/sda \ --ignition-url https://example.com/example.ign You may configure networking via 'sudo nmcli' or 'sudo nmtui' and have that configuration persist into the installed system by passing the '--copy-network' argument to 'coreos-installer install'. Please run 'coreos-installer install --help' for more information on the possible install options. ########################################################################### [core@localhost ~]$ Secure Start verification in progress. This may take a few seconds... Recommended Terminal Window Size = 100x31 ========================================= HPE ProLiant System BIOS U46 v1.58 (01/13/2022) (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP Early system initialization, please wait... iLO 5 IPv4: iLO 5 IPv6: iLO 5 IPv4: 10.8.247.46 iLO 5 IPv6: FE80::5EBA:2CFF:FE43:832A Fail to process new found FV, FV may be corrupted! ERROR: Internal fabric error detected!! PSF PID:0xBA, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0xBC, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF InstallHeciTransportPpis, start InstallHeciTransportPpis, end [HECI CONTROL PEI] HECI Transport found: 2 [HECI] [ME] (MeType is ME_TYPE_SPS) Initialization is allowed Initialization is not allowed Initialization is not allowed 2%: System Chipset Initialization Couldn't read Flash Security Override [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) Error: Update PEI FuSa (SAF) policy! Status: Not Found LtStatusRegister[0xFED30000] = 0x0000000000004092 LtExtendedStatusError[0xFED30008] = 0x0000000000000000 BootGuardBootStatus[0xFED300A0] = 0x9D54000080002000 BootGuardAcmError[0xFED30328] = 0x00000000C0008000 MSR_BOOT_GUARD_SACM_INFO[0x0000013A] = 0x0000000F0000007D Platform Type = 10 [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) MeUmaConfigureRequestedSegmentSize: Exiting (Status = Success) 4%: UPI Link Initialization - Start [IIO](UBA) [0.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p01] 0 | 1 | 1 | 0 | 0x00 | 0 [IIO](UBA) [0 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p05] 0 | 1 | 2 | 0 | 0x00 | 0 [IIO](UBA) [0 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.4] Bifurcation = 3 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p13] 0 | 1 | 255 | 0 | 0x00 | 0 [IIO](UBA) [0 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p15] 0 | 1 | 10 | 0 | 0x00 | 0 [IIO](UBA) [0 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p17] 0 | 1 | 13 | 1 | 0x00 | 0 [IIO](UBA) [0 p18] 0 | 1 | 14 | 1 | 0x00 | 0 [IIO](UBA) [0 p19] 0 | 1 | 15 | 1 | 0x00 | 0 [IIO](UBA) [0 p20] 0 | 1 | 16 | 1 | 0x00 | 0 [IIO](UBA) [1.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p01] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p05] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.4] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p13] 0 | 1 | 3 | 0 | 0x00 | 0 [IIO](UBA) [1 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p15] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p17] 0 | 1 | 29 | 1 | 0x00 | 0 [IIO](UBA) [1 p18] 0 | 1 | 30 | 1 | 0x00 | 0 [IIO](UBA) [1 p19] 0 | 1 | 31 | 1 | 0x00 | 0 [IIO](UBA) [1 p20] 0 | 1 | 32 | 1 | 0x00 | 0 BuildCpuTopologyInfoHob: Failed to Build Cpu Info Hob 5%: UPI Link Initialization - Complete [IIO](VMD) [0] VMD disabled for RPs init. PCH Detect: MMIO base on Socket 1, is 0, skipping! WARNING: Platform does not support uplink port! [IIO](VMD) [1] VMD disabled for RPs init. 7%: Early Processor Initialization PrevBootErrors: No Memory MCA Error Found PrevBootErrors - Valid MCA UC entries: 0 9%: Memory Initialization - Start C00: REFRESH_SYNC_TIME_PerCh= 7800 C00: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C00: HostRefreshStartTime= 7800 C00: HostRefreshStartTime= 7800 C01: HostRefreshStartTime= 7807 C01: HostRefreshStartTime= 7800 C02: HostRefreshStartTime= 7809 C02: HostRefreshStartTime= 7807 C03: HostRefreshStartTime= 7793 C03: HostRefreshStartTime= 7801 C04: HostRefreshStartTime= 7703 C04: HostRefreshStartTime= 7708 C05: HostRefreshStartTime= 7800 C05: HostRefreshStartTime= 7791 C06: HostRefreshStartTime= 7789 C06: HostRefreshStartTime= 7795 C07: HostRefreshStartTime= 7790 C07: HostRefreshStartTime= 7790 EnableHostRefresh Start Write Time diff[1]=134 ns EnableHostRefresh Start Write Time diff[1]=117 ns EnableHostRefresh Start Write Time diff[2]=254 ns EnableHostRefresh Start Write Time diff[2]=255 ns EnableHostRefresh Start Write Time diff[3]=283 ns EnableHostRefresh Start Write Time diff[3]=205 ns EnableHostRefresh Start Write Time diff[4]=188 ns EnableHostRefresh Start Write Time diff[4]=232 ns EnableHostRefresh Start Write Time diff[5]=268 ns EnableHostRefresh Start Write Time diff[5]=258 ns EnableHostRefresh Start Write Time diff[6]=254 ns EnableHostRefresh Start Write Time diff[6]=227 ns EnableHostRefresh Start Write Time diff[7]=269 ns EnableHostRefresh Start Write Time diff[7]=237 ns PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found [IIO](VMD) VMD init registered on endOfPei. WARNING: 00:46:04.0: Device 1077-8070 link width trained below capability WARNING: (RPLINKCAP 0x0F7A4084, RPLINKSTS 0x00003043) WARNING: (EPLINKCAP 0x0045F083, EPLINKSTS 0x00001043) PeiMemoryBaseAddress: 0x000000000E66E000. 18%: Memory Initialization - Complete ME UMA PostMem: SendDramInitDone (): InitStat = 0 ME UMA PostMem: BiosAction = 7 ME UMA PostMem: MeDramInitDone Complete. Checking for reset... Initialization is not allowed Platform Type = 10 Fail to process new found FV, FV may be corrupted! Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 TPM Measurement - Start TPM Measurement - Complete LocatePpi status = Success [SmbusErrataFix.c] Execute EfiSmbusSendByte (0xE2) mdatabyte = 4, Status = Device Error Install SgxInit Ppi : 0 Error: SgxRegistrationStatus report error code: 0x15 SGX disabled, exiting [IIO](TH) PCH Trace Hub not accessible [IPMI] mIpmiInstance->KcsTimeoutPeriod: 0x186A0 [IPMI] BMC Device ID: 0x13, firmware version: 2.60 UpdateMode:0 IPMI Dxe:Get BMC Device Id 21%: SMBIOS Table Initialization No ME Policy Protocol availableNo ME Policy Protocol availableUsbPortXhci Dxe driver:PlatformType=10 ConvertPages: failed to find range 94000000 - 97FFFFFF AllocateManagementDeviceBarSpace: SetMemorySpaceAttributes for Flash Device region failed! Status = 00000002 25%: USB Controller Initialization 28%: Chipset Root Ports Initialization 32%: HPE Memory Initialization HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr AE. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A0. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A2. ConvertPages: failed to find range 70000000 - 77BFFFFF HpTranslateTlsCipherList (715): Input / output data is null or input data size is invalid [OtaDxe.c] OtaDxeDriverEntry() { [OtaDxe.c] OtaDxeDriverEntry() -> Create OTA Event [OtaDxe.c] OtaDxeDriverEntry() -> OTA Event creation: Success [OtaDxe.c] OtaDxeDriverEntry() } Success [OtaShellCommands.c] OtaShellCommandsEntry() { [OtaShellCommands.c] OtaShellCommandsEntry() -> Init OTA Shell Commands Table [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaShell -> Success [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaConfig -> Success [OtaShellCommands.c] OtaShellCommandsEntry() } Success Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 ConvertPages: failed to find range F0000 - FFFFF ConvertPages: failed to find range 6F800000 - 6FFFFFFF ConvertPages: failed to find range 70000000 - 77BFFFFF ConvertPages: failed to find range 77C00000 - 7FFFFFFF ConvertPages: failed to find range 80000000 - 8FFFFFFF ConvertPages: failed to find range 90000000 - 93FFFFFF ConvertPages: failed to find range 94000000 - 97FFFFFF ConvertPages: failed to find range 98000000 - 99C0FFFF ConvertPages: failed to find range 99C10000 - A47FBFFF ConvertPages: failed to find range A4800000 - AE3FBFFF ConvertPages: failed to find range AE400000 - B7FFBFFF ConvertPages: failed to find range B8000000 - C1BFBFFF ConvertPages: failed to find range C1C00000 - CAFFBFFF ConvertPages: failed to find range CB800000 - D4FFBFFF ConvertPages: failed to find range D5000000 - DEBFBFFF ConvertPages: failed to find range DEC00000 - E87FBFFF ConvertPages: failed to find range E8800000 - F23FBFFF ConvertPages: failed to find range F2400000 - FB7FBFFF ConvertPages: failed to find range FD000000 - FDFFFFFF ConvertPages: failed to find range FE000000 - FE00FFFF ConvertPages: failed to find range FE010000 - FE7FFFFF ConvertPages: failed to find range FEC00000 - FEC00FFF ConvertPages: failed to find range FEC80000 - FED00FFF ConvertPages: failed to find range 200000000000 - 29FFFFFFFFFF 36%: System Security Initialization SMBIOS Package[0] - Processor[0] SMBIOS Package[1] - Processor[56] CPU[000]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 CPU[056]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 No PMems, Crystal Ridge Drvier is not going to be loaded. [IIO](TH) Trace Hub requested memory Size is 0. Not allocating memory. [IIO](TH) PCH Trace Hub not accessible. Disabled. [IIO](TH) ERROR Failed to configure PCH Trace Hub. Status= Not Ready ERROR: IioTraceHubInitialize failed. Status= Not Ready [IIO](SPK) IioSpkSocketInitialize: SocketId: 0 [IIO](SPK) IioSpkSocketInitialize: SocketId: 1 39%: iLO Embedded Health Initialization Run PPM in DXE 43%: ACPI Table Initialization TXT is disabled MeasurementTmeState() retrun error: Not Found MeasurementMktmeState() retrun error: Not Found Measurment MSR: MRTEATVT return error Not Found Measurment MSR: MRTECPBLT return error Not Found Measurment MSR: MRTEECUEBS return error Not Found Measurment MSR: MRTEECUEMS return error Not Found Measurement failed for one or more MSRs. retrun error: Not Found Warning: SGX is disabled on this system. [SGX] SgxDisabled_SgxLateInit: Success [SGX] SgxErrorCode = 0x0 Can not load NvDimmFwUpdateDriverEntryPoint : Type 1 NVDIMM support unavailable 46%: BIOS Configuration Initialization RbsuSetupDxeEntry, failed to initial product lines feature: Unsupported CheckDebugCertificateStatus: unpack error. 53%: Early PCI Initialization - Start PciRootBridgeEnumeratorPciDeviceTable: PCI-PCI Bridge found but not in PCI Device Table, Bus=0 PciRootBridgeEnumeratorPciDeviceTable: Continuing in ~8 sec. PchUplink programming error! Can not find the Uplink x16 port. [IE_HECI-0] Resetting HECI interface (CSR 80848408/80272709) 61%: Early PCI Initialization - Complete 71%: Switching console output to Primary Video. Please wait... :INIT - BIOS_RESET_CPL: Set CPL3 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL3 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** [SGX] SgxAfterPlatformLocksCallback entry BiosParamInfo TopologyInfo CpuSvn is 0 [SGX] UpdateRegistrationPackageInfo BEGIN [SGX] UpdateRegistrationPackageInfo END ExposeAllScenariosSgxRegistrationUefiVariables Enter Expose variable [SgxRegistrationConfiguration]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 RegistrationRequestType 0 Expose variable [SgxRegistrationServerRequest]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 1 Expose variable [SgxRegistrationPackageInfo]: SetVariable: Success ExposeToOsRuntime: 0 ReadOnlyOsRuntime: 0 Expose variable [SgxRegistrationStatus]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 Success to expose Registration Variables, exiting... [SGX] SgxAfterPlatformLocksCallback exit: success (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP HPE ProLiant DL360 Gen10 Plus System ROM Version: U46 v1.58 (01/13/2022) Serial Number: CZ22080FY9 Installed System Memory: 512 GB, Available System Memory: 512 GB 2 Processor(s) detected, 56 total cores enabled, Hyperthreading is enabled Proc 1: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz Proc 2: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz UPI Speed: 11.2 GT/s Workload Profile: Virtualization - Max Performance Power Regulator Mode: Static High Performance Advanced Memory Protection Mode: Fast Fault Tolerant Memory (ADDDC) RAS Mode: Firmware First Boot Mode: UEFI (Secure Boot) HPE Memory authenticated in all populated DIMM slots. ERROR: C80000002:V801000DD I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A5320 BuildDiskDriveTable: Cannot find more legal ports for SATA drive. Done! IsDevSmartArrayCtrl: AIP GetInformation for gEfiHpSmartArrayFeatures failed! Status = Unsupported HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) PopulateAndCreateDimmCurrentConfigRecords: Unable to retrieve size of InterleaveSets variable, Status = Not Found Embedded : iLO 5 embedded health Device - Repair Required Embedded : iLO 5 embedded health Device - Repair Required System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. ERROR: C80000002:V801000A6 I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. F1 pressed continue to boot in 19 seconds... T_TEST: Build ATSR SocketIndex=0. IIO_resource.valid=1. 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 T_TEST: Build ATSR SocketIndex=1. IIO_resource.valid=1.le or errors detected ReportDmar: Could not find RAC buffer or buffer size is 0! Status = Success HeciIeSetPowerRegulatorSetting: IEPS_CMD_SET_POWER_REGULATOR_REQ FAILURE(ResponseCode: 0x78) TPM Location configured (expected values: dTPM = 0x5 = 0x5 Value at TPM Base Address (0xFED40000) = 0xA1 HierarchyChangeAuth: Response Code error! 0x000009A2 Starting all devices for entering Boot Menu. Please wait...... BootMenuEntryCallback: Qid 0x801C to BootOption 0x14 RHEL CoreOS (Live) Use the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt. setparams 'RHEL CoreOS (Live)' linux /images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044\ -0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 initrd /images/pxeboot/initrd.img /images/ignition.img Press Ctrl-x to start, Ctrl-c for a command prompt or Escape to discard edits and return to the menu. Pressing Tab lists possible completions. EFI stub: UEFI Secure Boot is enabled. [ 0.000000] microcode: microcode updated early to revision 0xd000363, date = 2022-03-30 [ 0.000000] Linux version 4.18.0-305.62.1.el8_4.x86_64 (mockbuild@x86-vm-07.build.eng.bos.redhat.com) (gcc version 8.4.1 20200928 (Red Hat 8.4.1-1) (GCC)) #1 SMP Thu Aug 11 12:07:27 EDT 2022 [ 0.000000] Command line: BOOT_IMAGE=/images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044-0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 [ 0.000000] x86/split lock detection: disabled [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 [ 0.000000] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 [ 0.000000] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 [ 0.000000] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 [ 0.000000] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000093fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000094000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f333fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003f334000-0x000000003f336fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003f337000-0x0000000053c6bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000053c6c000-0x0000000053c9bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000053c9c000-0x00000000558ebfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000558ec000-0x000000005846cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000005846d000-0x00000000584fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000584fe000-0x00000000595fdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000595fe000-0x0000000059804fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000059805000-0x0000000059885fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000059886000-0x000000006f7fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000006f800000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000098000000-0x0000000099c0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000807fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x0000000000093fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000094000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003f333fff] usable [ 0.000000] reserve setup_data: [mem 0x000000003f334000-0x000000003f336fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000003f337000-0x00000000504fa017] usable [ 0.000000] reserve setup_data: [mem 0x00000000504fa018-0x000000005056b857] usable [ 0.000000] reserve setup_data: [mem 0x000000005056b858-0x000000005056c017] usable [ 0.000000] reserve setup_data: [mem 0x000000005056c018-0x00000000505dd857] usable [ 0.000000] reserve setup_data: [mem 0x00000000505dd858-0x00000000505de017] usable [ 0.000000] reserve setup_data: [mem 0x00000000505de018-0x000000005060d057] usable [ 0.000000] reserve setup_data: [mem 0x000000005060d058-0x000000005060e017] usable [ 0.000000] reserve setup_data: [mem 0x000000005060e018-0x0000000050619257] usable [ 0.000000] reserve setup_data: [mem 0x0000000050619258-0x000000005061a017] usable [ 0.000000] reserve setup_data: [mem 0x000000005061a018-0x0000000050622057] usable [ 0.000000] reserve setup_data: [mem 0x0000000050622058-0x0000000053c6bfff] usable [ 0.000000] reserve setup_data: [mem 0x0000000053c6c000-0x0000000053c9bfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x0000000053c9c000-0x00000000558ebfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000558ec000-0x000000005846cfff] usable [ 0.000000] reserve setup_data: [mem 0x000000005846d000-0x00000000584fdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000584fe000-0x00000000595fdfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000595fe000-0x0000000059804fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000059805000-0x0000000059885fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000059886000-0x000000006f7fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000006f800000-0x000000008fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000098000000-0x0000000099c0ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000807fffffff] usable [ 0.000000] efi: EFI v2.70 by HPE [ 0.000000] efi: SMBIOS=0x540a8000 SMBIOS 3.0=0x540a6000 ACPI=0x53c9b000 ACPI 2.0=0x53c9b014 TPMFinalLog=0x5855d000 MEMATTR=0x3c3ab018 MOKvar=0x540a5000 TPMEventLog=0x50623018 [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7 [ 0.000000] SMBIOS 3.4.0 present. [ 0.000000] DMI: HPE ProLiant DL360 Gen10 Plus/ProLiant DL360 Gen10 Plus, BIOS U46 01/13/2022 [ 0.000000] tsc: Detected 2200.000 MHz processor [ 0.000000] last_pfn = 0x8080000 max_arch_pfn = 0x10000000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 1046512M [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 10 lose cover RAM: 983056M [ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 512M num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 2G num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 10 lose cover RAM: 917552M [ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 10 lose cover RAM: 786544M [ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 10 lose cover RAM: 112M [ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 10 lose cover RAM: 112M [ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 10 lose cover RAM: 112M [ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 10 lose cover RAM: 112M [ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 10 lose cover RAM: 524528M [ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 10 lose cover RAM: 240M [ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 10 lose cover RAM: 240M [ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 10 lose cover RAM: 240M [ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 10 lose cover RAM: 496M [ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 10 lose cover RAM: 496M [ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 10 lose cover RAM: 496M [ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 9 lose cover RAM: 1008M [ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 9 lose cover RAM: 1008M [ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 8 lose cover RAM: 2032M [ 0.000000] mtrr_cleanup: can not find optimal value [ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size [ 0.000000] x2apic: enabled by BIOS, switching to x2apic ops [ 0.000000] last_pfn = 0x6f800 max_arch_pfn = 0x10000000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] RAMDISK: [mem 0x22893000-0x27fedfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000053C9B014 000024 (v02 HPE ) [ 0.000000] ACPI: XSDT 0x0000000053C84188 000124 (v01 HPE Server 00000001 01000013) [ 0.000000] ACPI: FACP 0x0000000053C8E000 00010C (v06 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: DSDT 0x0000000053C74000 00B195 (v02 HPE Server 00000002 HPE 00020000) [ 0.000000] ACPI: FACS 0x000000005855B000 000040 [ 0.000000] ACPI: SSDT 0x0000000053C99000 000C0A (v02 HPE ADDRXLAT 00000001 INTL 20181003) [ 0.000000] ACPI: ERST 0x0000000053C98000 000250 (v01 HPE Server 00000001 INTL 00000001) [ 0.000000] ACPI: MCEJ 0x0000000053C97000 000130 (v01 HPE Server 00000001 INTL 0100000D) [ 0.000000] ACPI: BERT 0x0000000053C96000 000030 (v01 HPE Server 00000001 INTL 00000001) [ 0.000000] ACPI: PMTT 0x0000000053C94000 000908 (v02 HPE Server 00000001 INTL 20091013) [ 0.000000] ACPI: SSDT 0x0000000053C93000 000562 (v01 HPE SgxSsdt 00000001 INTL 20181003) [ 0.000000] ACPI: HEST 0x0000000053C92000 00017C (v01 HPE Server 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 0x0000000053C91000 000170 (v01 HPE Server 00000001 INTL 00000001) [ 0.000000] ACPI: SSDT 0x0000000053C90000 00061B (v02 HPE Tpm2Tabl 00001000 INTL 20181003) [ 0.000000] ACPI: TPM2 0x0000000053C8F000 00004C (v04 HPE Server 00000002 01000013) [ 0.000000] ACPI: SSDT 0x0000000053C95000 00003A (v02 HPE PLATOPRG 00000001 INTL 20181003) [ 0.000000] ACPI: HPET 0x0000000053C8D000 000038 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: WDDT 0x0000000053C8C000 000040 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: APIC 0x0000000053C8B000 000C8C (v05 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: MCFG 0x0000000053C8A000 00003C (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SLIT 0x0000000053C89000 00003C (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SRAT 0x0000000053C88000 000B78 (v03 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: HMAT 0x0000000053C87000 000188 (v02 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SPMI 0x0000000053C86000 000041 (v05 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SPCR 0x0000000053C85000 000050 (v02 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: MSCT 0x0000000053C9A000 000090 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: BDAT 0x0000000053C83000 000030 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: WSMT 0x0000000053C82000 000028 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: PCCT 0x0000000053C81000 000030 (v02 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: DMAR 0x0000000053C80000 000280 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SSDT 0x0000000053C6E000 0050DC (v02 HPE PCISSDT 00000002 HPE 00020000) [ 0.000000] ACPI: SSDT 0x0000000053C6D000 0001C9 (v02 HPE TIMESSDT 00000002 HPE 00020000) [ 0.000000] ACPI: SSDT 0x0000000053C6C000 000302 (v01 HPE pmab 00000001 1590 20181003) [ 0.000000] ACPI: OEM1 0x000000003F336000 000430 (v02 HPE CPU CPC 00000002 HPE 00020000) [ 0.000000] ACPI: BGRT 0x000000003F335000 000038 (v01 HPE Server 00000002 1590 01000013) [ 0.000000] ACPI: FPDT 0x000000003F334000 000034 (v01 HPE Server 00000002 01000013) [ 0.000000] Setting APIC routing to cluster x2apic. [ 0.000000] SRAT: PXM 0 -> APIC 0x0000 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0002 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0004 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0006 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0008 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000a -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000c -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000e -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0010 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0012 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0014 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0016 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0018 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x001a -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x001c -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x001e -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0020 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0022 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0024 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0026 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0028 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002a -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002c -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002e -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0030 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0032 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0034 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0036 -> Node 1 [ 0.000000] SRAT: PXM 2 -> APIC 0x0080 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0082 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0084 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0086 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0088 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008a -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008c -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008e -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0090 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0092 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0094 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0096 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0098 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x009a -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 0x009c -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x009e -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a0 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a2 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a4 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a6 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a8 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00aa -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00ac -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00ae -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b0 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b2 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b4 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b6 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 0x0001 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0003 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0005 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0007 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0009 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000b -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000d -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000f -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0011 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0013 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0015 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0017 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0019 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x001b -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x001d -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x001f -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0021 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0023 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0025 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0027 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0029 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002b -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002d -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002f -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0031 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0033 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0035 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0037 -> Node 1 [ 0.000000] SRAT: PXM 2 -> APIC 0x0081 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0083 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0085 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0087 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0089 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008b -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008d -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008f -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0091 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0093 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0095 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0097 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0099 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x009b -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 0x009d -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x009f -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a1 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a3 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a5 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a7 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a9 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00ab -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00ad -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00af -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b1 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b3 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b5 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b7 -> Node 3 [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x207fffffff] [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x2080000000-0x407fffffff] [ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x4080000000-0x607fffffff] [ 0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x6080000000-0x807fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x207fffffff] -> [mem 0x00000000-0x207fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x207ffd6000-0x207fffffff] [ 0.000000] NODE_DATA(1) allocated [mem 0x407ffd6000-0x407fffffff] [ 0.000000] NODE_DATA(2) allocated [mem 0x607ffd6000-0x607fffffff] [ 0.000000] NODE_DATA(3) allocated [mem 0x807ffd3000-0x807fffcfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000807fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008ffff] [ 0.000000] node 0: [mem 0x0000000000094000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003f333fff] [ 0.000000] node 0: [mem 0x000000003f337000-0x0000000053c6bfff] [ 0.000000] node 0: [mem 0x00000000558ec000-0x000000005846cfff] [ 0.000000] node 0: [mem 0x00000000595fe000-0x0000000059804fff] [ 0.000000] node 0: [mem 0x0000000059886000-0x000000006f7fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000207fffffff] [ 0.000000] node 1: [mem 0x0000002080000000-0x000000407fffffff] [ 0.000000] node 2: [mem 0x0000004080000000-0x000000607fffffff] [ 0.000000] node 3: [mem 0x0000006080000000-0x000000807fffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 14075 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000207fffffff] [ 0.000000] Initmem setup node 1 [mem 0x0000002080000000-0x000000407fffffff] [ 0.000000] Initmem setup node 2 [mem 0x0000004080000000-0x000000607fffffff] [ 0.000000] Initmem setup node 3 [mem 0x0000006080000000-0x000000807fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: X2APIC_NMI (uid[0x00] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x01] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x02] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x03] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x04] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x05] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x06] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x07] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x08] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x09] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x10] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x11] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x12] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x13] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x14] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x15] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x16] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x17] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x18] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x19] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x20] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x21] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x22] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x23] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x24] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x25] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x26] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x27] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x28] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x29] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x30] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x31] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x32] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x33] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x34] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x35] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x36] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x37] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x80] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x81] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x82] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x83] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x84] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x85] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x86] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x87] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x88] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x89] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x90] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x91] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x92] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x93] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x94] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x95] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x96] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x97] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x98] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x99] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa0] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa1] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa2] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa3] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa4] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa5] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa6] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa7] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa8] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa9] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xaa] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xab] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xac] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xad] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xae] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xaf] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb0] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb1] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb2] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb3] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb4] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb5] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb6] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb7] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] ACPI: SPCR: console: uart,mmio,0x0,115200 [ 0.000000] smpboot: Allowing 112 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x00093fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x3edad000-0x3edddfff] [ 0.000000] PM: Registered nosave memory: [mem 0x3f334000-0x3f336fff] [ 0.000000] PM: Registered nosave memory: [mem 0x504fa000-0x504fafff] [ 0.000000] PM: Registered nosave memory: [mem 0x5056b000-0x5056bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5056c000-0x5056cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x505dd000-0x505ddfff] [ 0.000000] PM: Registered nosave memory: [mem 0x505de000-0x505defff] [ 0.000000] PM: Registered nosave memory: [mem 0x5060d000-0x5060dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5060e000-0x5060efff] [ 0.000000] PM: Registered nosave memory: [mem 0x50619000-0x50619fff] [ 0.000000] PM: Registered nosave memory: [mem 0x5061a000-0x5061afff] [ 0.000000] PM: Registered nosave memory: [mem 0x50622000-0x50622fff] [ 0.000000] PM: Registered nosave memory: [mem 0x53c6c000-0x53c9bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x53c9c000-0x558ebfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5846d000-0x584fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x584fe000-0x595fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x59805000-0x59885fff] [ 0.000000] PM: Registered nosave memory: [mem 0x6f800000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x97ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x98000000-0x99c0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x99c10000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe00ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe010000-0xffffffff] [ 0.000000] [mem 0x99c10000-0xfdffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:112 nr_cpu_ids:112 nr_node_ids:4 [ 0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.000000] Built 4 zonelists, mobility grouping on. Total pages: 132042185 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044-0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 [ 0.000000] Specific versions of hardware are certified with Red Hat Enterprise Linux 8. Please see the list of hardware certified with Red Hat Enterprise Linux 8 at https://catalog.redhat.com. [ 0.000000] Memory: 1744464K/536552468K available (12293K kernel code, 2225K rwdata, 7716K rodata, 2480K init, 14040K bss, 9015880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=112, Nodes=4 [ 0.000000] ftrace: allocating 38610 entries in 151 pages [ 0.000000] ftrace: allocated 151 pages with 5 groups [ 0.001000] rcu: Hierarchical RCU implementation. [ 0.001000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=112. [ 0.001000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.001000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=112 [ 0.001000] NR_IRQS: 524544, nr_irqs: 2952, preallocated irqs: 16 [ 0.001000] random: crng done (trusting CPU's manufacturer) [ 0.001000] Console: colour dummy device 80x25 [ 0.001000] printk: console [tty0] enabled [ 0.001000] printk: console [ttyS0] enabled [ 0.001000] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl [ 0.001000] ACPI: Core revision 20200925 [ 0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.001006] APIC: Switch to symmetric I/O mode setup [ 0.002004] DMAR: Host address width 46 [ 0.003004] DMAR: DRHD base: 0x000000d4ffc000 flags: 0x0 [ 0.004008] DMAR: dmar0: reg_base_addr d4ffc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.005003] DMAR: DRHD base: 0x000000debfc000 flags: 0x0 [ 0.006006] DMAR: dmar1: reg_base_addr debfc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.007003] DMAR: DRHD base: 0x000000e87fc000 flags: 0x0 [ 0.008005] DMAR: dmar2: reg_base_addr e87fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.009003] DMAR: DRHD base: 0x000000f23fc000 flags: 0x0 [ 0.010005] DMAR: dmar3: reg_base_addr f23fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.011003] DMAR: DRHD base: 0x000000fb7fc000 flags: 0x0 [ 0.012005] DMAR: dmar4: reg_base_addr fb7fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.013003] DMAR: DRHD base: 0x000000ae3fc000 flags: 0x0 [ 0.014005] DMAR: dmar5: reg_base_addr ae3fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.015003] DMAR: DRHD base: 0x000000b7ffc000 flags: 0x0 [ 0.016005] DMAR: dmar6: reg_base_addr b7ffc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.017003] DMAR: DRHD base: 0x000000c1bfc000 flags: 0x0 [ 0.018006] DMAR: dmar7: reg_base_addr c1bfc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.019003] DMAR: DRHD base: 0x000000caffc000 flags: 0x0 [ 0.020005] DMAR: dmar8: reg_base_addr caffc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.021003] DMAR: DRHD base: 0x000000a47fc000 flags: 0x1 [ 0.022005] DMAR: dmar9: reg_base_addr a47fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.023003] DMAR: RMRR base: 0x0000005846e000 end: 0x00000058470fff [ 0.024003] DMAR: RMRR base: 0x000000584be000 end: 0x000000584befff [ 0.025003] DMAR: ATSR flags: 0x0 [ 0.026003] DMAR: ATSR flags: 0x0 [ 0.027004] DMAR-IR: IOAPIC id 8 under DRHD base 0xa47fc000 IOMMU 9 [ 0.028003] DMAR-IR: HPET id 0 under DRHD base 0xa47fc000 [ 0.029003] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.033050] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.036714] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.041005] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.042003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.00 BogoMIPS (lpj=2200000) [ 0.043001] pid_max: default: 114688 minimum: 896 [ 0.056763] Security Framework initialized [ 0.057001] Yama: becoming mindful. [ 0.058004] SELinux: Initializing. [ 0.082269] Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes) [ 0.094057] Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.095387] Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.096328] Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.098608] x86/cpu: SGX disabled by BIOS [ 0.099004] x86/tme: not enabled by BIOS [ 0.100003] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.101000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.102007] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.103077] CPU0: Thermal monitoring enabled (TM1) [ 0.104330] process: using mwait in idle threads [ 0.105002] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.106000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.107003] FEATURE SPEC_CTRL Present [ 0.108000] FEATURE IBPB_SUPPORT Present [ 0.109001] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.110001] Spectre V2 : Mitigation: Enhanced IBRS [ 0.111000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.112002] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.113001] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.115411] Freeing SMP alternatives memory: 32K [ 0.119161] smpboot: CPU0: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz (family: 0x6, model: 0x6a, stepping: 0x6) [ 0.120204] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.121001] ... version: 5 [ 0.122001] ... bit width: 48 [ 0.123000] ... generic registers: 8 [ 0.124000] ... value mask: 0000ffffffffffff [ 0.125000] ... max period: 00007fffffffffff [ 0.126000] ... fixed-purpose events: 4 [ 0.127000] ... event mask: 0001000f000000ff [ 0.128094] rcu: Hierarchical SRCU implementation. [ 0.137507] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.138021] smp: Bringing up secondary CPUs ... [ 0.139100] x86: Booting SMP configuration: [ 0.140002] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 [ 0.303002] .... node #1, CPUs: #14 [ 0.001000] ------------[ cut here ]------------ [ 0.001000] sched: CPU #14's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. [ 0.001000] WARNING: CPU: 14 PID: 0 at arch/x86/kernel/smpboot.c:435 topology_sane.isra.7+0x62/0x70 [ 0.001000] Modules linked in: [ 0.001000] CPU: 14 PID: 0 Comm: swapper/14 Not tainted 4.18.0-305.62.1.el8_4.x86_64 #1 [ 0.001000] Hardware name: HPE ProLiant DL360 Gen10 Plus/ProLiant DL360 Gen10 Plus, BIOS U46 01/13/2022 [ 0.001000] RIP: 0010:topology_sane.isra.7+0x62/0x70 [ 0.001000] Code: 0f 94 c0 c3 80 3d 8c cf 77 01 00 75 ef 89 f1 41 89 d9 89 fe 41 89 e8 48 c7 c7 e0 f5 2a b3 c6 05 72 cf 77 01 01 e8 c7 ae 08 00 <0f> 0b eb ce 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 53 48 [ 0.001000] RSP: 0000:ff4e2b388c5b3ec8 EFLAGS: 00010082 [ 0.001000] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffb385f208 [ 0.001000] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046 [ 0.001000] RBP: 0000000000000001 R08: 00000000000002df R09: 0000000000000070 [ 0.001000] R10: 0000000000000000 R11: ff4e2b388c5b3d70 R12: 0000000000000000 [ 0.001000] R13: 000000000000f260 R14: 000000000000000e R15: 000000000000000e [ 0.001000] FS: 0000000000000000(0000) GS:ff47835c3f600000(0000) knlGS:0000000000000000 [ 0.001000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.001000] CR2: 0000000000000000 CR3: 00000058cbc10001 CR4: 0000000000771ee0 [ 0.001000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 0.001000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 0.001000] PKRU: 00000000 [ 0.001000] Call Trace: [ 0.001000] set_cpu_sibling_map+0x149/0x5b0 [ 0.001000] start_secondary+0x97/0x1e0 [ 0.001000] secondary_startup_64_no_verify+0xc2/0xcb [ 0.001000] ---[ end trace 7476c9b57290dfed ]--- [ 2.364277] #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 [ 2.529002] .... node #2, CPUs: #28 [ 0.001000] smpboot: CPU 28 Converting physical 0 to logical die 1 [ 2.766115] #29 #30 #31 #32 #33 #34 #35 #36 #37 #38 #39 #40 #41 [ 3.108002] .... node #3, CPUs: #42 #43 #44 #45 #46 #47 #48 #49 #50 #51 #52 #53 #54 #55 [ 3.284002] .... node #0, CPUs: #56 #57 #58 #59 #60 #61 #62 #63 #64 #65 #66 #67 #68 #69 [ 3.342003] .... node #1, CPUs: #70 #71 #72 #73 #74 #75 #76 #77 #78 #79 #80 #81 #82 #83 [ 3.402003] .... node #2, CPUs: #84 #85 #86 #87 #88 #89 #90 #91 #92 #93 #94 #95 #96 #97 [ 3.461002] .... node #3, CPUs: #98 #99 #100 #101 #102 #103 #104 #105 #106 #107 #108 #109 #110 #111 [ 3.520603] smp: Brought up 4 nodes, 112 CPUs [ 3.522001] smpboot: Max logical packages: 2 [ 3.523002] smpboot: Total of 112 processors activated (494335.85 BogoMIPS) [ 3.589098] node 0 deferred pages initialised in 61ms [ 3.605057] node 1 deferred pages initialised in 77ms [ 3.607049] node 3 deferred pages initialised in 79ms [ 3.628054] node 2 deferred pages initialised in 100ms [ 3.842238] devtmpfs: initialized [ 3.882064] x86/mm: Memory block size: 2048MB [ 3.936034] PM: Registering ACPI NVS region [mem 0x584fe000-0x595fdfff] (17825792 bytes) [ 4.034002] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 4.151076] futex hash table entries: 32768 (order: 9, 2097152 bytes) [ 4.228577] pinctrl core: initialized pinctrl subsystem [ 4.291273] NET: Registered protocol family 16 [ 4.345133] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 4.430011] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 4.524010] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 4.620024] audit: initializing netlink subsys (disabled) [ 4.685020] audit: type=2000 audit(1664546498.685:1): state=initialized audit_enabled=0 res=1 [ 4.787005] cpuidle: using governor menu [ 4.834005] Invalid PCCT: 0 PCC subspaces [ 4.883059] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 4.974003] ACPI: bus type PCI registered [ 5.022002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 5.099157] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 5.211007] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 5.292013] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 5.417248] PCI: Using configuration type 1 for base access [ 5.484007] PCI: HP ProLiant DL360 detected, enabling pci=bfsort. [ 5.561162] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 5.641003] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 5.722160] cryptd: max_cpu_qlen set to 1000 [ 5.774222] fbcon: Taking over console [ 5.819278] ACPI: Added _OSI(Module Device) [ 5.869003] ACPI: Added _OSI(Processor Device) [ 5.922001] ACPI: Added _OSI(3.0 _SCP Extensions) [ 5.979002] ACPI: Added _OSI(Processor Aggregator Device) [ 6.044003] ACPI: Added _OSI(Linux-Dell-Video) [ 6.097001] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 6.160002] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 6.225758] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 6.308554] ACPI: Interpreter enabled [ 6.352010] ACPI: (supports S0 S5) [ 6.393002] ACPI: Using IOAPIC for interrupt routing [ 6.452045] HEST: Table parsing has been initialized. [ 6.513004] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 6.623627] ACPI: Enabled 3 GPEs in block 00 to 7F [ 6.687277] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7e]) [ 6.758006] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 6.870038] PCI host bridge to bus 0000:7e [ 6.920003] pci_bus 0000:7e: root bus resource [bus 7e] [ 6.982011] pci 0000:7e:00.0: [8086:3450] type 00 class 0x088000 [ 7.054067] pci 0000:7e:00.1: [8086:3451] type 00 class 0x088000 [ 7.126055] pci 0000:7e:00.2: [8086:3452] type 00 class 0x088000 [ 7.198052] pci 0000:7e:00.3: [8086:0998] type 00 class 0x060000 [ 7.270055] pci 0000:7e:00.5: [8086:3455] type 00 class 0x088000 [ 7.342058] pci 0000:7e:02.0: [8086:3440] type 00 class 0x088000 [ 7.414108] pci 0000:7e:02.1: [8086:3441] type 00 class 0x088000 [ 7.486106] pci 0000:7e:02.2: [8086:3442] type 00 class 0x088000 [ 7.559107] pci 0000:7e:03.0: [8086:3440] type 00 class 0x088000 [ 7.631077] pci 0000:7e:03.1: [8086:3441] type 00 class 0x088000 [ 7.703072] pci 0000:7e:03.2: [8086:3442] type 00 class 0x088000 [ 7.775083] pci 0000:7e:04.0: [8086:3440] type 00 class 0x088000 [ 7.847118] pci 0000:7e:04.1: [8086:3441] type 00 class 0x088000 [ 7.919115] pci 0000:7e:04.2: [8086:3442] type 00 class 0x088000 [ 7.991112] pci 0000:7e:04.3: [8086:3443] type 00 class 0x088000 [ 8.063115] pci 0000:7e:05.0: [8086:3445] type 00 class 0x088000 [ 8.135108] pci 0000:7e:05.1: [8086:3446] type 00 class 0x088000 [ 8.207112] pci 0000:7e:05.2: [8086:3447] type 00 class 0x088000 [ 8.279110] pci 0000:7e:06.0: [8086:3445] type 00 class 0x088000 [ 8.352074] pci 0000:7e:06.1: [8086:3446] type 00 class 0x088000 [ 8.424075] pci 0000:7e:06.2: [8086:3447] type 00 class 0x088000 [ 8.496080] pci 0000:7e:07.0: [8086:3445] type 00 class 0x088000 [ 8.568117] pci 0000:7e:07.1: [8086:3446] type 00 class 0x088000 [ 8.640117] pci 0000:7e:07.2: [8086:3447] type 00 class 0x088000 [ 8.712114] pci 0000:7e:0b.0: [8086:3448] type 00 class 0x088000 [ 8.784069] pci 0000:7e:0b.1: [8086:3448] type 00 class 0x088000 [ 8.856059] pci 0000:7e:0b.2: [8086:344b] type 00 class 0x088000 [ 8.928066] pci 0000:7e:0c.0: [8086:344a] type 00 class 0x110100 [ 9.000086] pci 0000:7e:0d.0: [8086:344a] type 00 class 0x110100 [ 9.072078] pci 0000:7e:0e.0: [8086:344a] type 00 class 0x110100 [ 9.144143] pci 0000:7e:0f.0: [8086:344a] type 00 class 0x110100 [ 9.217153] pci 0000:7e:1a.0: [8086:2880] type 00 class 0x110100 [ 9.289087] pci 0000:7e:1b.0: [8086:2880] type 00 class 0x110100 [ 9.361078] pci 0000:7e:1c.0: [8086:2880] type 00 class 0x110100 [ 9.433146] pci 0000:7e:1d.0: [8086:2880] type 00 class 0x110100 [ 9.505180] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus 7f]) [ 9.576003] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 9.689024] PCI host bridge to bus 0000:7f [ 9.738002] pci_bus 0000:7f: root bus resource [bus 7f] [ 9.800012] pci 0000:7f:00.0: [8086:344c] type 00 class 0x088000 [ 9.872100] pci 0000:7f:00.1: [8086:344c] type 00 class 0x088000 [ 9.944096] pci 0000:7f:00.2: [8086:344c] type 00 class 0x088000 [ 10.017106] pci 0000:7f:00.3: [8086:344c] type 00 class 0x088000 [ 10.089105] pci 0000:7f:00.4: [8086:344c] type 00 class 0x088000 [ 10.161089] pci 0000:7f:00.5: [8086:344c] type 00 class 0x088000 [ 10.233113] pci 0000:7f:00.6: [8086:344c] type 00 class 0x088000 [ 10.305116] pci 0000:7f:00.7: [8086:344c] type 00 class 0x088000 [ 10.377078] pci 0000:7f:01.0: [8086:344c] type 00 class 0x088000 [ 10.449124] pci 0000:7f:01.1: [8086:344c] type 00 class 0x088000 [ 10.521121] pci 0000:7f:01.2: [8086:344c] type 00 class 0x088000 [ 10.593076] pci 0000:7f:01.3: [8086:344c] type 00 class 0x088000 [ 10.665130] pci 0000:7f:01.4: [8086:344c] type 00 class 0x088000 [ 10.738065] pci 0000:7f:01.5: [8086:344c] type 00 class 0x088000 [ 10.810135] pci 0000:7f:01.6: [8086:344c] type 00 class 0x088000 [ 10.882116] pci 0000:7f:01.7: [8086:344c] type 00 class 0x088000 [ 10.954117] pci 0000:7f:02.0: [8086:344c] type 00 class 0x088000 [ 11.026124] pci 0000:7f:02.1: [8086:344c] type 00 class 0x088000 [ 11.098131] pci 0000:7f:02.2: [8086:344c] type 00 class 0x088000 [ 11.170129] pci 0000:7f:02.3: [8086:344c] type 00 class 0x088000 [ 11.242130] pci 0000:7f:02.4: [8086:344c] type 00 class 0x088000 [ 11.314135] pci 0000:7f:02.5: [8086:344c] type 00 class 0x088000 [ 11.387137] pci 0000:7f:02.6: [8086:344c] type 00 class 0x088000 [ 11.459144] pci 0000:7f:02.7: [8086:344c] type 00 class 0x088000 [ 11.531143] pci 0000:7f:03.0: [8086:344c] type 00 class 0x088000 [ 11.603140] pci 0000:7f:03.1: [8086:344c] type 00 class 0x088000 [ 11.675140] pci 0000:7f:03.2: [8086:344c] type 00 class 0x088000 [ 11.747148] pci 0000:7f:03.3: [8086:344c] type 00 class 0x088000 [ 11.819152] pci 0000:7f:03.4: [8086:344c] type 00 class 0x088000 [ 11.891091] pci 0000:7f:03.5: [8086:344c] type 00 class 0x088000 [ 11.964111] pci 0000:7f:03.6: [8086:344c] type 00 class 0x088000 [ 12.036085] pci 0000:7f:03.7: [8086:344c] type 00 class 0x088000 [ 12.108116] pci 0000:7f:04.0: [8086:344c] type 00 class 0x088000 [ 12.180079] pci 0000:7f:04.1: [8086:344c] type 00 class 0x088000 [ 12.252126] pci 0000:7f:04.2: [8086:344c] type 00 class 0x088000 [ 12.324126] pci 0000:7f:04.3: [8086:344c] type 00 class 0x088000 [ 12.396123] pci 0000:7f:04.4: [8086:344c] type 00 class 0x088000 [ 12.468132] pci 0000:7f:04.5: [8086:344c] type 00 class 0x088000 [ 12.540136] pci 0000:7f:04.6: [8086:344c] type 00 class 0x088000 [ 12.612149] pci 0000:7f:04.7: [8086:344c] type 00 class 0x088000 [ 12.685145] pci 0000:7f:0a.0: [8086:344d] type 00 class 0x088000 [ 12.757096] pci 0000:7f:0a.1: [8086:344d] type 00 class 0x088000 [ 12.829097] pci 0000:7f:0a.2: [8086:344d] type 00 class 0x088000 [ 12.901108] pci 0000:7f:0a.3: [8086:344d] type 00 class 0x088000 [ 12.973103] pci 0000:7f:0a.4: [8086:344d] type 00 class 0x088000 [ 13.045092] pci 0000:7f:0a.5: [8086:344d] type 00 class 0x088000 [ 13.117113] pci 0000:7f:0a.6: [8086:344d] type 00 class 0x088000 [ 13.189114] pci 0000:7f:0a.7: [8086:344d] type 00 class 0x088000 [ 13.261080] pci 0000:7f:0b.0: [8086:344d] type 00 class 0x088000 [ 13.333122] pci 0000:7f:0b.1: [8086:344d] type 00 class 0x088000 [ 13.406119] pci 0000:7f:0b.2: [8086:344d] type 00 class 0x088000 [ 13.478075] pci 0000:7f:0b.3: [8086:344d] type 00 class 0x088000 [ 13.550127] pci 0000:7f:0b.4: [8086:344d] type 00 class 0x088000 [ 13.622137] pci 0000:7f:0b.5: [8086:344d] type 00 class 0x088000 [ 13.694134] pci 0000:7f:0b.6: [8086:344d] type 00 class 0x088000 [ 13.766122] pci 0000:7f:0b.7: [8086:344d] type 00 class 0x088000 [ 13.838118] pci 0000:7f:0c.0: [8086:344d] type 00 class 0x088000 [ 13.910122] pci 0000:7f:0c.1: [8086:344d] type 00 class 0x088000 [ 13.982133] pci 0000:7f:0c.2: [8086:344d] type 00 class 0x088000 [ 14.055131] pci 0000:7f:0c.3: [8086:344d] type 00 class 0x088000 [ 14.127128] pci 0000:7f:0c.4: [8086:344d] type 00 class 0x088000 [ 14.199136] pci 0000:7f:0c.5: [8086:344d] type 00 class 0x088000 [ 14.271133] pci 0000:7f:0c.6: [8086:344d] type 00 class 0x088000 [ 14.343145] pci 0000:7f:0c.7: [8086:344d] type 00 class 0x088000 [ 14.415145] pci 0000:7f:0d.0: [8086:344d] type 00 class 0x088000 [ 14.487138] pci 0000:7f:0d.1: [8086:344d] type 00 class 0x088000 [ 14.559141] pci 0000:7f:0d.2: [8086:344d] type 00 class 0x088000 [ 14.632144] pci 0000:7f:0d.3: [8086:344d] type 00 class 0x088000 [ 14.704153] pci 0000:7f:0d.4: [8086:344d] type 00 class 0x088000 [ 14.776095] pci 0000:7f:0d.5: [8086:344d] type 00 class 0x088000 [ 14.848109] pci 0000:7f:0d.6: [8086:344d] type 00 class 0x088000 [ 14.920087] pci 0000:7f:0d.7: [8086:344d] type 00 class 0x088000 [ 14.992114] pci 0000:7f:0e.0: [8086:344d] type 00 class 0x088000 [ 15.064077] pci 0000:7f:0e.1: [8086:344d] type 00 class 0x088000 [ 15.136128] pci 0000:7f:0e.2: [8086:344d] type 00 class 0x088000 [ 15.208124] pci 0000:7f:0e.3: [8086:344d] type 00 class 0x088000 [ 15.280125] pci 0000:7f:0e.4: [8086:344d] type 00 class 0x088000 [ 15.353132] pci 0000:7f:0e.5: [8086:344d] type 00 class 0x088000 [ 15.425134] pci 0000:7f:0e.6: [8086:344d] type 00 class 0x088000 [ 15.497151] pci 0000:7f:0e.7: [8086:344d] type 00 class 0x088000 [ 15.569156] pci 0000:7f:1d.0: [8086:344f] type 00 class 0x088000 [ 15.641104] pci 0000:7f:1d.1: [8086:3457] type 00 class 0x088000 [ 15.713112] pci 0000:7f:1e.0: [8086:3458] type 00 class 0x088000 [ 15.785060] pci 0000:7f:1e.1: [8086:3459] type 00 class 0x088000 [ 15.857062] pci 0000:7f:1e.2: [8086:345a] type 00 class 0x088000 [ 15.929059] pci 0000:7f:1e.3: [8086:345b] type 00 class 0x088000 [ 16.001061] pci 0000:7f:1e.4: [8086:345c] type 00 class 0x088000 [ 16.073061] pci 0000:7f:1e.5: [8086:345d] type 00 class 0x088000 [ 16.146061] pci 0000:7f:1e.6: [8086:345e] type 00 class 0x088000 [ 16.218063] pci 0000:7f:1e.7: [8086:345f] type 00 class 0x088000 [ 16.290107] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fe]) [ 16.361004] acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 16.473026] PCI host bridge to bus 0000:fe [ 16.522002] pci_bus 0000:fe: root bus resource [bus fe] [ 16.585007] pci 0000:fe:00.0: [8086:3450] type 00 class 0x088000 [ 16.657056] pci 0000:fe:00.1: [8086:3451] type 00 class 0x088000 [ 16.729058] pci 0000:fe:00.2: [8086:3452] type 00 class 0x088000 [ 16.801062] pci 0000:fe:00.3: [8086:0998] type 00 class 0x060000 [ 16.873057] pci 0000:fe:00.5: [8086:3455] type 00 class 0x088000 [ 16.945065] pci 0000:fe:02.0: [8086:3440] type 00 class 0x088000 [ 17.017114] pci 0000:fe:02.1: [8086:3441] type 00 class 0x088000 [ 17.089109] pci 0000:fe:02.2: [8086:3442] type 00 class 0x088000 [ 17.161112] pci 0000:fe:03.0: [8086:3440] type 00 class 0x088000 [ 17.234079] pci 0000:fe:03.1: [8086:3441] type 00 class 0x088000 [ 17.306079] pci 0000:fe:03.2: [8086:3442] type 00 class 0x088000 [ 17.378084] pci 0000:fe:04.0: [8086:3440] type 00 class 0x088000 [ 17.450120] pci 0000:fe:04.1: [8086:3441] type 00 class 0x088000 [ 17.522119] pci 0000:fe:04.2: [8086:3442] type 00 class 0x088000 [ 17.594117] pci 0000:fe:04.3: [8086:3443] type 00 class 0x088000 [ 17.666121] pci 0000:fe:05.0: [8086:3445] type 00 class 0x088000 [ 17.738119] pci 0000:fe:05.1: [8086:3446] type 00 class 0x088000 [ 17.810112] pci 0000:fe:05.2: [8086:3447] type 00 class 0x088000 [ 17.882118] pci 0000:fe:06.0: [8086:3445] type 00 class 0x088000 [ 17.955081] pci 0000:fe:06.1: [8086:3446] type 00 class 0x088000 [ 18.027080] pci 0000:fe:06.2: [8086:3447] type 00 class 0x088000 [ 18.099088] pci 0000:fe:07.0: [8086:3445] type 00 class 0x088000 [ 18.171120] pci 0000:fe:07.1: [8086:3446] type 00 class 0x088000 [ 18.243121] pci 0000:fe:07.2: [8086:3447] type 00 class 0x088000 [ 18.315124] pci 0000:fe:0b.0: [8086:3448] type 00 class 0x088000 [ 18.387062] pci 0000:fe:0b.1: [8086:3448] type 00 class 0x088000 [ 18.459064] pci 0000:fe:0b.2: [8086:344b] type 00 class 0x088000 [ 18.531068] pci 0000:fe:0c.0: [8086:344a] type 00 class 0x110100 [ 18.603091] pci 0000:fe:0d.0: [8086:344a] type 00 class 0x110100 [ 18.675086] pci 0000:fe:0e.0: [8086:344a] type 00 class 0x110100 [ 18.747149] pci 0000:fe:0f.0: [8086:344a] type 00 class 0x110100 [ 18.820161] pci 0000:fe:1a.0: [8086:2880] type 00 class 0x110100 [ 18.892089] pci 0000:fe:1b.0: [8086:2880] type 00 class 0x110100 [ 18.964084] pci 0000:fe:1c.0: [8086:2880] type 00 class 0x110100 [ 19.036153] pci 0000:fe:1d.0: [8086:2880] type 00 class 0x110100 [ 19.108178] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus ff]) [ 19.179003] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 19.292023] PCI host bridge to bus 0000:ff [ 19.341001] pci_bus 0000:ff: root bus resource [bus ff] [ 19.403012] pci 0000:ff:00.0: [8086:344c] type 00 class 0x088000 [ 19.475113] pci 0000:ff:00.1: [8086:344c] type 00 class 0x088000 [ 19.548111] pci 0000:ff:00.2: [8086:344c] type 00 class 0x088000 [ 19.620096] pci 0000:ff:00.3: [8086:344c] type 00 class 0x088000 [ 19.692116] pci 0000:ff:00.4: [8086:344c] type 00 class 0x088000 [ 19.764121] pci 0000:ff:00.5: [8086:344c] type 00 class 0x088000 [ 19.836091] pci 0000:ff:00.6: [8086:344c] type 00 class 0x088000 [ 19.908123] pci 0000:ff:00.7: [8086:344c] type 00 class 0x088000 [ 19.980120] pci 0000:ff:01.0: [8086:344c] type 00 class 0x088000 [ 20.052082] pci 0000:ff:01.1: [8086:344c] type 00 class 0x088000 [ 20.124131] pci 0000:ff:01.2: [8086:344c] type 00 class 0x088000 [ 20.196125] pci 0000:ff:01.3: [8086:344c] type 00 class 0x088000 [ 20.269079] pci 0000:ff:01.4: [8086:344c] type 00 class 0x088000 [ 20.341137] pci 0000:ff:01.5: [8086:344c] type 00 class 0x088000 [ 20.413134] pci 0000:ff:01.6: [8086:344c] type 00 class 0x088000 [ 20.485120] pci 0000:ff:01.7: [8086:344c] type 00 class 0x088000 [ 20.557132] pci 0000:ff:02.0: [8086:344c] type 00 class 0x088000 [ 20.629132] pci 0000:ff:02.1: [8086:344c] type 00 class 0x088000 [ 20.701130] pci 0000:ff:02.2: [8086:344c] type 00 class 0x088000 [ 20.773138] pci 0000:ff:02.3: [8086:344c] type 00 class 0x088000 [ 20.845133] pci 0000:ff:02.4: [8086:344c] type 00 class 0x088000 [ 20.918143] pci 0000:ff:02.5: [8086:344c] type 00 class 0x088000 [ 20.990145] pci 0000:ff:02.6: [8086:344c] type 00 class 0x088000 [ 21.062152] pci 0000:ff:02.7: [8086:344c] type 00 class 0x088000 [ 21.134145] pci 0000:ff:03.0: [8086:344c] type 00 class 0x088000 [ 21.206145] pci 0000:ff:03.1: [8086:344c] type 00 class 0x088000 [ 21.278154] pci 0000:ff:03.2: [8086:344c] type 00 class 0x088000 [ 21.350150] pci 0000:ff:03.3: [8086:344c] type 00 class 0x088000 [ 21.422146] pci 0000:ff:03.4: [8086:344c] type 00 class 0x088000 [ 21.495100] pci 0000:ff:03.5: [8086:344c] type 00 class 0x088000 [ 21.567097] pci 0000:ff:03.6: [8086:344c] type 00 class 0x088000 [ 21.639093] pci 0000:ff:03.7: [8086:344c] type 00 class 0x088000 [ 21.711087] pci 0000:ff:04.0: [8086:344c] type 00 class 0x088000 [ 21.783140] pci 0000:ff:04.1: [8086:344c] type 00 class 0x088000 [ 21.855125] pci 0000:ff:04.2: [8086:344c] type 00 class 0x088000 [ 21.927128] pci 0000:ff:04.3: [8086:344c] type 00 class 0x088000 [ 21.999137] pci 0000:ff:04.4: [8086:344c] type 00 class 0x088000 [ 22.071136] pci 0000:ff:04.5: [8086:344c] type 00 class 0x088000 [ 22.144140] pci 0000:ff:04.6: [8086:344c] type 00 class 0x088000 [ 22.216151] pci 0000:ff:04.7: [8086:344c] type 00 class 0x088000 [ 22.288163] pci 0000:ff:0a.0: [8086:344d] type 00 class 0x088000 [ 22.360111] pci 0000:ff:0a.1: [8086:344d] type 00 class 0x088000 [ 22.432111] pci 0000:ff:0a.2: [8086:344d] type 00 class 0x088000 [ 22.504095] pci 0000:ff:0a.3: [8086:344d] type 00 class 0x088000 [ 22.576118] pci 0000:ff:0a.4: [8086:344d] type 00 class 0x088000 [ 22.648116] pci 0000:ff:0a.5: [8086:344d] type 00 class 0x088000 [ 22.720091] pci 0000:ff:0a.6: [8086:344d] type 00 class 0x088000 [ 22.793127] pci 0000:ff:0a.7: [8086:344d] type 00 class 0x088000 [ 22.865121] pci 0000:ff:0b.0: [8086:344d] type 00 class 0x088000 [ 22.937086] pci 0000:ff:0b.1: [8086:344d] type 00 class 0x088000 [ 23.009129] pci 0000:ff:0b.2: [8086:344d] type 00 class 0x088000 [ 23.081123] pci 0000:ff:0b.3: [8086:344d] type 00 class 0x088000 [ 23.153081] pci 0000:ff:0b.4: [8086:344d] type 00 class 0x088000 [ 23.225136] pci 0000:ff:0b.5: [8086:344d] type 00 class 0x088000 [ 23.297132] pci 0000:ff:0b.6: [8086:344d] type 00 class 0x088000 [ 23.369124] pci 0000:ff:0b.7: [8086:344d] type 00 class 0x088000 [ 23.441130] pci 0000:ff:0c.0: [8086:344d] type 00 class 0x088000 [ 23.514132] pci 0000:ff:0c.1: [8086:344d] type 00 class 0x088000 [ 23.586130] pci 0000:ff:0c.2: [8086:344d] type 00 class 0x088000 [ 23.658134] pci 0000:ff:0c.3: [8086:344d] type 00 class 0x088000 [ 23.730138] pci 0000:ff:0c.4: [8086:344d] type 00 class 0x088000 [ 23.802143] pci 0000:ff:0c.5: [8086:344d] type 00 class 0x088000 [ 23.874140] pci 0000:ff:0c.6: [8086:344d] type 00 class 0x088000 [ 23.946151] pci 0000:ff:0c.7: [8086:344d] type 00 class 0x088000 [ 24.018144] pci 0000:ff:0d.0: [8086:344d] type 00 class 0x088000 [ 24.091145] pci 0000:ff:0d.1: [8086:344d] type 00 class 0x088000 [ 24.163156] pci 0000:ff:0d.2: [8086:344d] type 00 class 0x088000 [ 24.235151] pci 0000:ff:0d.3: [8086:344d] type 00 class 0x088000 [ 24.307145] pci 0000:ff:0d.4: [8086:344d] type 00 class 0x088000 [ 24.379099] pci 0000:ff:0d.5: [8086:344d] type 00 class 0x088000 [ 24.451100] pci 0000:ff:0d.6: [8086:344d] type 00 class 0x088000 [ 24.523093] pci 0000:ff:0d.7: [8086:344d] type 00 class 0x088000 [ 24.595086] pci 0000:ff:0e.0: [8086:344d] type 00 class 0x088000 [ 24.668140] pci 0000:ff:0e.1: [8086:344d] type 00 class 0x088000 [ 24.740127] pci 0000:ff:0e.2: [8086:344d] type 00 class 0x088000 [ 24.812131] pci 0000:ff:0e.3: [8086:344d] type 00 class 0x088000 [ 24.884138] pci 0000:ff:0e.4: [8086:344d] type 00 class 0x088000 [ 24.956134] pci 0000:ff:0e.5: [8086:344d] type 00 class 0x088000 [ 25.028141] pci 0000:ff:0e.6: [8086:344d] type 00 class 0x088000 [ 25.100152] pci 0000:ff:0e.7: [8086:344d] type 00 class 0x088000 [ 25.172174] pci 0000:ff:1d.0: [8086:344f] type 00 class 0x088000 [ 25.245121] pci 0000:ff:1d.1: [8086:3457] type 00 class 0x088000 [ 25.317122] pci 0000:ff:1e.0: [8086:3458] type 00 class 0x088000 [ 25.389064] pci 0000:ff:1e.1: [8086:3459] type 00 class 0x088000 [ 25.461064] pci 0000:ff:1e.2: [8086:345a] type 00 class 0x088000 [ 25.533063] pci 0000:ff:1e.3: [8086:345b] type 00 class 0x088000 [ 25.605064] pci 0000:ff:1e.4: [8086:345c] type 00 class 0x088000 [ 25.677064] pci 0000:ff:1e.5: [8086:345d] type 00 class 0x088000 [ 25.749068] pci 0000:ff:1e.6: [8086:345e] type 00 class 0x088000 [ 25.821062] pci 0000:ff:1e.7: [8086:345f] type 00 class 0x088000 [ 25.895666] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-0d]) [ 25.970008] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 26.083077] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 26.178066] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 26.269002] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 26.368428] PCI host bridge to bus 0000:00 [ 26.417002] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 26.498003] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 26.580002] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window] [ 26.661002] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window] [ 26.742007] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 26.832002] pci_bus 0000:00: root bus resource [io 0x1000-0x4fff window] [ 26.914002] pci_bus 0000:00: root bus resource [mem 0x90000000-0xa47fbfff window] [ 27.003002] pci_bus 0000:00: root bus resource [mem 0x200000000000-0x20ffffffffff window] [ 27.101003] pci_bus 0000:00: root bus resource [bus 00-0d] [ 27.167008] pci 0000:00:00.0: [8086:09a2] type 00 class 0x088000 [ 27.239126] pci 0000:00:00.1: [8086:09a4] type 00 class 0x088000 [ 27.311099] pci 0000:00:00.2: [8086:09a3] type 00 class 0x088000 [ 27.383099] pci 0000:00:00.4: [8086:0998] type 00 class 0x060000 [ 27.455101] pci 0000:00:01.0: [8086:0b00] type 00 class 0x088000 [ 27.528013] pci 0000:00:01.0: reg 0x10: [mem 0x20fffff40000-0x20fffff43fff 64bit] [ 27.617105] pci 0000:00:01.1: [8086:0b00] type 00 class 0x088000 [ 27.689012] pci 0000:00:01.1: reg 0x10: [mem 0x20fffff3c000-0x20fffff3ffff 64bit] [ 27.779104] pci 0000:00:01.2: [8086:0b00] type 00 class 0x088000 [ 27.851012] pci 0000:00:01.2: reg 0x10: [mem 0x20fffff38000-0x20fffff3bfff 64bit] [ 27.941102] pci 0000:00:01.3: [8086:0b00] type 00 class 0x088000 [ 28.013012] pci 0000:00:01.3: reg 0x10: [mem 0x20fffff34000-0x20fffff37fff 64bit] [ 28.103101] pci 0000:00:01.4: [8086:0b00] type 00 class 0x088000 [ 28.175012] pci 0000:00:01.4: reg 0x10: [mem 0x20fffff30000-0x20fffff33fff 64bit] [ 28.265101] pci 0000:00:01.5: [8086:0b00] type 00 class 0x088000 [ 28.337012] pci 0000:00:01.5: reg 0x10: [mem 0x20fffff2c000-0x20fffff2ffff 64bit] [ 28.426105] pci 0000:00:01.6: [8086:0b00] type 00 class 0x088000 [ 28.498012] pci 0000:00:01.6: reg 0x10: [mem 0x20fffff28000-0x20fffff2bfff 64bit] [ 28.588102] pci 0000:00:01.7: [8086:0b00] type 00 class 0x088000 [ 28.660012] pci 0000:00:01.7: reg 0x10: [mem 0x20fffff24000-0x20fffff27fff 64bit] [ 28.750102] pci 0000:00:02.0: [8086:09a6] type 00 class 0x088000 [ 28.822010] pci 0000:00:02.0: reg 0x10: [mem 0x99ed4000-0x99ed5fff] [ 28.897089] pci 0000:00:02.1: [8086:09a7] type 00 class 0x088000 [ 28.969010] pci 0000:00:02.1: reg 0x10: [mem 0x99e00000-0x99e7ffff] [ 29.044007] pci 0000:00:02.1: reg 0x14: [mem 0x99d80000-0x99dfffff] [ 29.120087] pci 0000:00:02.4: [8086:3456] type 00 class 0x130000 [ 29.192011] pci 0000:00:02.4: reg 0x10: [mem 0x20ffffe00000-0x20ffffefffff 64bit] [ 29.281007] pci 0000:00:02.4: reg 0x18: [mem 0x20fffff20000-0x20fffff23fff 64bit] [ 29.371007] pci 0000:00:02.4: reg 0x20: [mem 0x20fffff00000-0x20fffff1ffff 64bit] [ 29.461096] pci 0000:00:11.0: [8086:a1ec] type 00 class 0xff0000 [ 29.533135] pci 0000:00:14.0: [8086:a1af] type 00 class 0x0c0330 [ 29.605025] pci 0000:00:14.0: reg 0x10: [mem 0x99ec0000-0x99ecffff 64bit] [ 29.686067] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 29.756104] pci 0000:00:14.2: [8086:a1b1] type 00 class 0x118000 [ 29.829022] pci 0000:00:14.2: reg 0x10: [mem 0x20fffff47000-0x20fffff47fff 64bit] [ 29.918151] pci 0000:00:1c.0: [8086:a190] type 01 class 0x060400 [ 29.990077] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 30.063116] pci 0000:00:1c.2: [8086:a192] type 01 class 0x060400 [ 30.136077] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 30.209090] pci 0000:00:1c.3: [8086:a193] type 01 class 0x060400 [ 30.281075] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 30.354085] pci 0000:00:1c.4: [8086:a194] type 01 class 0x060400 [ 30.426072] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 30.499102] pci 0000:00:1c.5: [8086:a195] type 01 class 0x060400 [ 30.571072] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 30.644088] pci 0000:00:1f.0: [8086:a1cb] type 00 class 0x060100 [ 30.716147] pci 0000:00:1f.2: [8086:a1a1] type 00 class 0x058000 [ 30.788016] pci 0000:00:1f.2: reg 0x10: [mem 0x99ed0000-0x99ed3fff] [ 30.864113] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 30.923036] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 30.983033] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 31.042048] pci 0000:01:00.0: [103c:3306] type 00 class 0x088000 [ 31.114027] pci 0000:01:00.0: reg 0x10: [io 0x1200-0x12ff] [ 31.181011] pci 0000:01:00.0: reg 0x14: [mem 0x99b9e000-0x99b9e3ff] [ 31.256011] pci 0000:01:00.0: reg 0x18: [io 0x1100-0x11ff] [ 31.323011] pci 0000:01:00.0: reg 0x1c: [mem 0x94000000-0x97ffffff] [ 31.398011] pci 0000:01:00.0: reg 0x20: [mem 0x99800000-0x999fffff] [ 31.473139] pci 0000:01:00.1: [102b:0538] type 00 class 0x030000 [ 31.545023] pci 0000:01:00.1: reg 0x10: [mem 0x98000000-0x98ffffff pref] [ 31.626011] pci 0000:01:00.1: reg 0x14: [mem 0x99b98000-0x99b9bfff] [ 31.701011] pci 0000:01:00.1: reg 0x18: [mem 0x99000000-0x997fffff] [ 31.776046] pci 0000:01:00.1: BAR 0: assigned to efifb [ 31.838008] pci 0000:01:00.1: efifb_fixup_resources+0x0/0x130 took 60546 usecs [ 31.924098] pci 0000:01:00.2: [103c:3307] type 00 class 0x088000 [ 31.996023] pci 0000:01:00.2: reg 0x10: [io 0x1000-0x10ff] [ 32.063011] pci 0000:01:00.2: reg 0x14: [mem 0x99b9d000-0x99b9d0ff] [ 32.138011] pci 0000:01:00.2: reg 0x18: [mem 0x99a00000-0x99afffff] [ 32.213011] pci 0000:01:00.2: reg 0x1c: [mem 0x99b00000-0x99b7ffff] [ 32.288011] pci 0000:01:00.2: reg 0x20: [mem 0x99b90000-0x99b97fff] [ 32.364011] pci 0000:01:00.2: reg 0x24: [mem 0x99b80000-0x99b8ffff] [ 32.439011] pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 32.519057] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 32.592094] pci 0000:01:00.4: [103c:22f6] type 00 class 0x0c0320 [ 32.664025] pci 0000:01:00.4: reg 0x10: [mem 0x99b9c000-0x99b9c0ff] [ 32.739168] pci 0000:00:1c.4: PCI bridge to [bus 01] [ 32.799003] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] [ 32.872004] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x99bfffff] [ 32.953037] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 33.013217] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.096036] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 33.178033] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.260032] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.343033] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.425032] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.508033] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.590033] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.673164] ACPI: PCI Root Bridge [PC01] (domain 0000 [bus 0e-29]) [ 33.747012] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 33.860074] acpi PNP0A08:01: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 33.955061] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 34.047002] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration [ 34.145049] PCI host bridge to bus 0000:0e [ 34.194002] pci_bus 0000:0e: root bus resource [io 0x5000-0x6fff window] [ 34.275003] pci_bus 0000:0e: root bus resource [mem 0xa4800000-0xae3fbfff window] [ 34.365002] pci_bus 0000:0e: root bus resource [mem 0x210000000000-0x21ffffffffff window] [ 34.463002] pci_bus 0000:0e: root bus resource [bus 0e-29] [ 34.529009] pci 0000:0e:00.0: [8086:09a2] type 00 class 0x088000 [ 34.601074] pci 0000:0e:00.1: [8086:09a4] type 00 class 0x088000 [ 34.673067] pci 0000:0e:00.2: [8086:09a3] type 00 class 0x088000 [ 34.745070] pci 0000:0e:00.4: [8086:0998] type 00 class 0x060000 [ 34.817066] pci 0000:0e:02.0: [8086:347a] type 01 class 0x060400 [ 34.889015] pci 0000:0e:02.0: reg 0x10: [mem 0x21fffff00000-0x21fffff1ffff 64bit] [ 34.979037] pci 0000:0e:02.0: PME# supported from D0 D3hot D3cold [ 35.052182] pci 0000:0f:00.0: [1000:10e2] type 00 class 0x010400 [ 35.124021] pci 0000:0f:00.0: reg 0x10: [mem 0xa4800000-0xa48fffff 64bit pref] [ 35.210009] pci 0000:0f:00.0: reg 0x18: [mem 0xa4900000-0xa49fffff 64bit pref] [ 35.297007] pci 0000:0f:00.0: reg 0x20: [mem 0xa4a00000-0xa4afffff] [ 35.372007] pci 0000:0f:00.0: reg 0x24: [io 0x5000-0x50ff] [ 35.439007] pci 0000:0f:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref] [ 35.519049] pci 0000:0f:00.0: supports D1 D2 [ 35.571083] pci 0000:0e:02.0: PCI bridge to [bus 0f] [ 35.630003] pci 0000:0e:02.0: bridge window [io 0x5000-0x5fff] [ 35.703003] pci 0000:0e:02.0: bridge window [mem 0xa4a00000-0xa4afffff] [ 35.784005] pci 0000:0e:02.0: bridge window [mem 0xa4800000-0xa49fffff 64bit pref] [ 35.877072] ACPI: PCI Root Bridge [PC02] (domain 0000 [bus 2a-45]) [ 35.951009] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 36.064070] acpi PNP0A08:02: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 36.159060] acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 36.251002] acpi PNP0A08:02: FADT indicates ASPM is unsupported, using BIOS configuration [ 36.349044] PCI host bridge to bus 0000:2a [ 36.398002] pci_bus 0000:2a: root bus resource [io 0x7000-0x8fff window] [ 36.480002] pci_bus 0000:2a: root bus resource [mem 0xae400000-0xb7ffbfff window] [ 36.569002] pci_bus 0000:2a: root bus resource [mem 0x220000000000-0x22ffffffffff window] [ 36.667003] pci_bus 0000:2a: root bus resource [bus 2a-45] [ 36.733008] pci 0000:2a:00.0: [8086:09a2] type 00 class 0x088000 [ 36.805045] pci 0000:2a:00.1: [8086:09a4] type 00 class 0x088000 [ 36.877068] pci 0000:2a:00.2: [8086:09a3] type 00 class 0x088000 [ 36.949064] pci 0000:2a:00.4: [8086:0998] type 00 class 0x060000 [ 37.021066] pci 0000:2a:02.0: [8086:347a] type 01 class 0x060400 [ 37.093015] pci 0000:2a:02.0: reg 0x10: [mem 0x22fffff00000-0x22fffff1ffff 64bit] [ 37.183013] pci 0000:2a:02.0: enabling Extended Tags [ 37.243028] pci 0000:2a:02.0: PME# supported from D0 D3hot D3cold [ 37.316098] pci 0000:2a:02.0: PCI bridge to [bus 2b] [ 37.375036] ACPI: PCI Root Bridge [PC04] (domain 0000 [bus 46-61]) [ 37.449006] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 37.562066] acpi PNP0A08:03: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 37.657060] acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 37.749002] acpi PNP0A08:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 37.847050] PCI host bridge to bus 0000:46 [ 37.896002] pci_bus 0000:46: root bus resource [io 0x9000-0xafff window] [ 37.977002] pci_bus 0000:46: root bus resource [mem 0xb8000000-0xc1bfbfff window] [ 38.067003] pci_bus 0000:46: root bus resource [mem 0x230000000000-0x23ffffffffff window] [ 38.165003] pci_bus 0000:46: root bus resource [bus 46-61] [ 38.231008] pci 0000:46:00.0: [8086:09a2] type 00 class 0x088000 [ 38.303069] pci 0000:46:00.1: [8086:09a4] type 00 class 0x088000 [ 38.375067] pci 0000:46:00.2: [8086:09a3] type 00 class 0x088000 [ 38.447065] pci 0000:46:00.4: [8086:0998] type 00 class 0x060000 [ 38.519066] pci 0000:46:02.0: [8086:347a] type 01 class 0x060400 [ 38.591016] pci 0000:46:02.0: reg 0x10: [mem 0x23fffff20000-0x23fffff3ffff 64bit] [ 38.681013] pci 0000:46:02.0: enabling Extended Tags [ 38.740027] pci 0000:46:02.0: PME# supported from D0 D3hot D3cold [ 38.813068] pci 0000:46:04.0: [8086:347c] type 01 class 0x060400 [ 38.886015] pci 0000:46:04.0: reg 0x10: [mem 0x23fffff00000-0x23fffff1ffff 64bit] [ 38.975037] pci 0000:46:04.0: PME# supported from D0 D3hot D3cold [ 39.048124] pci 0000:46:02.0: PCI bridge to [bus 47] [ 39.108074] pci 0000:48:00.0: [1077:8070] type 00 class 0x020000 [ 39.180025] pci 0000:48:00.0: reg 0x10: [mem 0xb9020000-0xb903ffff 64bit pref] [ 39.267010] pci 0000:48:00.0: reg 0x18: [mem 0xb8800000-0xb8ffffff 64bit pref] [ 39.353010] pci 0000:48:00.0: reg 0x20: [mem 0xb9050000-0xb905ffff 64bit pref] [ 39.440008] pci 0000:48:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 39.520055] pci 0000:48:00.0: PME# supported from D0 D3hot D3cold [ 39.593048] pci 0000:48:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:46:04.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link) [ 39.774061] pci 0000:48:00.1: [1077:8070] type 00 class 0x020000 [ 39.846023] pci 0000:48:00.1: reg 0x10: [mem 0xb9000000-0xb901ffff 64bit pref] [ 39.932010] pci 0000:48:00.1: reg 0x18: [mem 0xb8000000-0xb87fffff 64bit pref] [ 40.019010] pci 0000:48:00.1: reg 0x20: [mem 0xb9040000-0xb904ffff 64bit pref] [ 40.106007] pci 0000:48:00.1: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 40.186052] pci 0000:48:00.1: PME# supported from D0 D3hot D3cold [ 40.259089] pci 0000:46:04.0: PCI bridge to [bus 48] [ 40.319005] pci 0000:46:04.0: bridge window [mem 0xb8000000-0xb90fffff 64bit pref] [ 40.412047] ACPI: PCI Root Bridge [PC05] (domain 0000 [bus 62-7d]) [ 40.486007] acpi PNP0A08:04: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 40.598071] acpi PNP0A08:04: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 40.693060] acpi PNP0A08:04: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 40.785003] acpi PNP0A08:04: FADT indicates ASPM is unsupported, using BIOS configuration [ 40.883049] PCI host bridge to bus 0000:62 [ 40.932003] pci_bus 0000:62: root bus resource [io 0xb000-0xbfff window] [ 41.014002] pci_bus 0000:62: root bus resource [mem 0xc1c00000-0xcaffbfff window] [ 41.103002] pci_bus 0000:62: root bus resource [mem 0x240000000000-0x24ffffffffff window] [ 41.202003] pci_bus 0000:62: root bus resource [bus 62-7d] [ 41.267008] pci 0000:62:00.0: [8086:09a2] type 00 class 0x088000 [ 41.339072] pci 0000:62:00.1: [8086:09a4] type 00 class 0x088000 [ 41.411069] pci 0000:62:00.2: [8086:09a3] type 00 class 0x088000 [ 41.483066] pci 0000:62:00.4: [8086:0998] type 00 class 0x060000 [ 41.555067] pci 0000:62:02.0: [8086:347a] type 01 class 0x060400 [ 41.627016] pci 0000:62:02.0: reg 0x10: [mem 0x24fffff60000-0x24fffff7ffff 64bit] [ 41.717013] pci 0000:62:02.0: enabling Extended Tags [ 41.777033] pci 0000:62:02.0: PME# supported from D0 D3hot D3cold [ 41.850061] pci 0000:62:03.0: [8086:347b] type 01 class 0x060400 [ 41.922015] pci 0000:62:03.0: reg 0x10: [mem 0x24fffff40000-0x24fffff5ffff 64bit] [ 42.012013] pci 0000:62:03.0: enabling Extended Tags [ 42.071032] pci 0000:62:03.0: PME# supported from D0 D3hot D3cold [ 42.144056] pci 0000:62:04.0: [8086:347c] type 01 class 0x060400 [ 42.216014] pci 0000:62:04.0: reg 0x10: [mem 0x24fffff20000-0x24fffff3ffff 64bit] [ 42.306013] pci 0000:62:04.0: enabling Extended Tags [ 42.365031] pci 0000:62:04.0: PME# supported from D0 D3hot D3cold [ 42.438058] pci 0000:62:05.0: [8086:347d] type 01 class 0x060400 [ 42.510014] pci 0000:62:05.0: reg 0x10: [mem 0x24fffff00000-0x24fffff1ffff 64bit] [ 42.600013] pci 0000:62:05.0: enabling Extended Tags [ 42.660032] pci 0000:62:05.0: PME# supported from D0 D3hot D3cold [ 42.733083] pci 0000:62:02.0: PCI bridge to [bus 63] [ 42.792028] pci 0000:62:03.0: PCI bridge to [bus 64] [ 42.852024] pci 0000:62:04.0: PCI bridge to [bus 65] [ 42.911025] pci 0000:62:05.0: PCI bridge to [bus 66] [ 42.971047] ACPI: PCI Root Bridge [PC06] (domain 0000 [bus 80-82]) [ 43.045006] acpi PNP0A08:05: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 43.158067] acpi PNP0A08:05: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 43.253060] acpi PNP0A08:05: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 43.344002] acpi PNP0A08:05: FADT indicates ASPM is unsupported, using BIOS configuration [ 43.443035] PCI host bridge to bus 0000:80 [ 43.492002] pci_bus 0000:80: root bus resource [mem 0xcb800000-0xd4ffbfff window] [ 43.581006] pci_bus 0000:80: root bus resource [mem 0x250000000000-0x25ffffffffff window] [ 43.679003] pci_bus 0000:80: root bus resource [bus 80-82] [ 43.745008] pci 0000:80:00.0: [8086:09a2] type 00 class 0x088000 [ 43.817071] pci 0000:80:00.1: [8086:09a4] type 00 class 0x088000 [ 43.889070] pci 0000:80:00.2: [8086:09a3] type 00 class 0x088000 [ 43.961070] pci 0000:80:00.4: [8086:0998] type 00 class 0x060000 [ 44.033070] pci 0000:80:01.0: [8086:0b00] type 00 class 0x088000 [ 44.105014] pci 0000:80:01.0: reg 0x10: [mem 0x25fffff40000-0x25fffff43fff 64bit] [ 44.195077] pci 0000:80:01.1: [8086:0b00] type 00 class 0x088000 [ 44.267013] pci 0000:80:01.1: reg 0x10: [mem 0x25fffff3c000-0x25fffff3ffff 64bit] [ 44.357074] pci 0000:80:01.2: [8086:0b00] type 00 class 0x088000 [ 44.429013] pci 0000:80:01.2: reg 0x10: [mem 0x25fffff38000-0x25fffff3bfff 64bit] [ 44.519072] pci 0000:80:01.3: [8086:0b00] type 00 class 0x088000 [ 44.591014] pci 0000:80:01.3: reg 0x10: [mem 0x25fffff34000-0x25fffff37fff 64bit] [ 44.681051] pci 0000:80:01.4: [8086:0b00] type 00 class 0x088000 [ 44.753014] pci 0000:80:01.4: reg 0x10: [mem 0x25fffff30000-0x25fffff33fff 64bit] [ 44.842072] pci 0000:80:01.5: [8086:0b00] type 00 class 0x088000 [ 44.914013] pci 0000:80:01.5: reg 0x10: [mem 0x25fffff2c000-0x25fffff2ffff 64bit] [ 45.004076] pci 0000:80:01.6: [8086:0b00] type 00 class 0x088000 [ 45.076013] pci 0000:80:01.6: reg 0x10: [mem 0x25fffff28000-0x25fffff2bfff 64bit] [ 45.166073] pci 0000:80:01.7: [8086:0b00] type 00 class 0x088000 [ 45.238013] pci 0000:80:01.7: reg 0x10: [mem 0x25fffff24000-0x25fffff27fff 64bit] [ 45.328072] pci 0000:80:02.0: [8086:09a6] type 00 class 0x088000 [ 45.400011] pci 0000:80:02.0: reg 0x10: [mem 0xcb980000-0xcb981fff] [ 45.475058] pci 0000:80:02.1: [8086:09a7] type 00 class 0x088000 [ 45.547011] pci 0000:80:02.1: reg 0x10: [mem 0xcb900000-0xcb97ffff] [ 45.622006] pci 0000:80:02.1: reg 0x14: [mem 0xcb880000-0xcb8fffff] [ 45.697056] pci 0000:80:02.4: [8086:3456] type 00 class 0x130000 [ 45.769012] pci 0000:80:02.4: reg 0x10: [mem 0x25ffffe00000-0x25ffffefffff 64bit] [ 45.859007] pci 0000:80:02.4: reg 0x18: [mem 0x25fffff20000-0x25fffff23fff 64bit] [ 45.949007] pci 0000:80:02.4: reg 0x20: [mem 0x25fffff00000-0x25fffff1ffff 64bit] [ 46.038077] ACPI: PCI Root Bridge [PC07] (domain 0000 [bus 83-a0]) [ 46.113007] acpi PNP0A08:06: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 46.225066] acpi PNP0A08:06: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 46.320059] acpi PNP0A08:06: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 46.412002] acpi PNP0A08:06: FADT indicates ASPM is unsupported, using BIOS configuration [ 46.510033] PCI host bridge to bus 0000:83 [ 46.559002] pci_bus 0000:83: root bus resource [io 0xc000-0xcfff window] [ 46.641002] pci_bus 0000:83: root bus resource [mem 0xd5000000-0xdebfbfff window] [ 46.730002] pci_bus 0000:83: root bus resource [mem 0x260000000000-0x26ffffffffff window] [ 46.828002] pci_bus 0000:83: root bus resource [bus 83-a0] [ 46.894011] pci 0000:83:00.0: [8086:09a2] type 00 class 0x088000 [ 46.966073] pci 0000:83:00.1: [8086:09a4] type 00 class 0x088000 [ 47.038067] pci 0000:83:00.2: [8086:09a3] type 00 class 0x088000 [ 47.110069] pci 0000:83:00.4: [8086:0998] type 00 class 0x060000 [ 47.182069] pci 0000:83:02.0: [8086:347a] type 01 class 0x060400 [ 47.254016] pci 0000:83:02.0: reg 0x10: [mem 0x26fffff00000-0x26fffff1ffff 64bit] [ 47.344013] pci 0000:83:02.0: enabling Extended Tags [ 47.404032] pci 0000:83:02.0: PME# supported from D0 D3hot D3cold [ 47.477089] pci 0000:83:02.0: PCI bridge to [bus 84] [ 47.536031] ACPI: PCI Root Bridge [PC08] (domain 0000 [bus a1-be]) [ 47.610006] acpi PNP0A08:07: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 47.723069] acpi PNP0A08:07: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 47.818060] acpi PNP0A08:07: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 47.910002] acpi PNP0A08:07: FADT indicates ASPM is unsupported, using BIOS configuration [ 48.008034] PCI host bridge to bus 0000:a1 [ 48.057002] pci_bus 0000:a1: root bus resource [io 0xd000-0xdfff window] [ 48.138002] pci_bus 0000:a1: root bus resource [mem 0xdec00000-0xe87fbfff window] [ 48.228004] pci_bus 0000:a1: root bus resource [mem 0x270000000000-0x27ffffffffff window] [ 48.326002] pci_bus 0000:a1: root bus resource [bus a1-be] [ 48.392008] pci 0000:a1:00.0: [8086:09a2] type 00 class 0x088000 [ 48.464067] pci 0000:a1:00.1: [8086:09a4] type 00 class 0x088000 [ 48.536067] pci 0000:a1:00.2: [8086:09a3] type 00 class 0x088000 [ 48.608069] pci 0000:a1:00.4: [8086:0998] type 00 class 0x060000 [ 48.680072] pci 0000:a1:02.0: [8086:347a] type 01 class 0x060400 [ 48.752016] pci 0000:a1:02.0: reg 0x10: [mem 0x27fffff00000-0x27fffff1ffff 64bit] [ 48.842013] pci 0000:a1:02.0: enabling Extended Tags [ 48.901031] pci 0000:a1:02.0: PME# supported from D0 D3hot D3cold [ 48.975093] pci 0000:a1:02.0: PCI bridge to [bus a2] [ 49.034032] ACPI: PCI Root Bridge [PC10] (domain 0000 [bus bf-dc]) [ 49.108006] acpi PNP0A08:08: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 49.221066] acpi PNP0A08:08: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 49.316060] acpi PNP0A08:08: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 49.408002] acpi PNP0A08:08: FADT indicates ASPM is unsupported, using BIOS configuration [ 49.506045] PCI host bridge to bus 0000:bf [ 49.555001] pci_bus 0000:bf: root bus resource [io 0xe000-0xefff window] [ 49.636002] pci_bus 0000:bf: root bus resource [mem 0xe8800000-0xf23fbfff window] [ 49.726002] pci_bus 0000:bf: root bus resource [mem 0x280000000000-0x28ffffffffff window] [ 49.824002] pci_bus 0000:bf: root bus resource [bus bf-dc] [ 49.890010] pci 0000:bf:00.0: [8086:09a2] type 00 class 0x088000 [ 49.962077] pci 0000:bf:00.1: [8086:09a4] type 00 class 0x088000 [ 50.034069] pci 0000:bf:00.2: [8086:09a3] type 00 class 0x088000 [ 50.106072] pci 0000:bf:00.4: [8086:0998] type 00 class 0x060000 [ 50.178074] pci 0000:bf:02.0: [8086:347a] type 01 class 0x060400 [ 50.250016] pci 0000:bf:02.0: reg 0x10: [mem 0x28fffff00000-0x28fffff1ffff 64bit] [ 50.340014] pci 0000:bf:02.0: enabling Extended Tags [ 50.399032] pci 0000:bf:02.0: PME# supported from D0 D3hot D3cold [ 50.472096] pci 0000:bf:02.0: PCI bridge to [bus c0] [ 50.532035] ACPI: PCI Root Bridge [PC11] (domain 0000 [bus dd-fa]) [ 50.606006] acpi PNP0A08:09: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 50.719065] acpi PNP0A08:09: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 50.814064] acpi PNP0A08:09: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 50.906002] acpi PNP0A08:09: FADT indicates ASPM is unsupported, using BIOS configuration [ 51.004042] PCI host bridge to bus 0000:dd [ 51.053002] pci_bus 0000:dd: root bus resource [io 0xf000-0xffff window] [ 51.134002] pci_bus 0000:dd: root bus resource [mem 0xf2400000-0xfb7fbfff window] [ 51.224002] pci_bus 0000:dd: root bus resource [mem 0x290000000000-0x29ffffffffff window] [ 51.322002] pci_bus 0000:dd: root bus resource [bus dd-fa] [ 51.388008] pci 0000:dd:00.0: [8086:09a2] type 00 class 0x088000 [ 51.460078] pci 0000:dd:00.1: [8086:09a4] type 00 class 0x088000 [ 51.532070] pci 0000:dd:00.2: [8086:09a3] type 00 class 0x088000 [ 51.604074] pci 0000:dd:00.4: [8086:0998] type 00 class 0x060000 [ 51.676073] pci 0000:dd:02.0: [8086:347a] type 01 class 0x060400 [ 51.748017] pci 0000:dd:02.0: reg 0x10: [mem 0x29fffff60000-0x29fffff7ffff 64bit] [ 51.838014] pci 0000:dd:02.0: enabling Extended Tags [ 51.897036] pci 0000:dd:02.0: PME# supported from D0 D3hot D3cold [ 51.970064] pci 0000:dd:03.0: [8086:347b] type 01 class 0x060400 [ 52.042017] pci 0000:dd:03.0: reg 0x10: [mem 0x29fffff40000-0x29fffff5ffff 64bit] [ 52.132014] pci 0000:dd:03.0: enabling Extended Tags [ 52.191037] pci 0000:dd:03.0: PME# supported from D0 D3hot D3cold [ 52.265062] pci 0000:dd:04.0: [8086:347c] type 01 class 0x060400 [ 52.337016] pci 0000:dd:04.0: reg 0x10: [mem 0x29fffff20000-0x29fffff3ffff 64bit] [ 52.426014] pci 0000:dd:04.0: enabling Extended Tags [ 52.486037] pci 0000:dd:04.0: PME# supported from D0 D3hot D3cold [ 52.559059] pci 0000:dd:05.0: [8086:347d] type 01 class 0x060400 [ 52.631017] pci 0000:dd:05.0: reg 0x10: [mem 0x29fffff00000-0x29fffff1ffff 64bit] [ 52.721014] pci 0000:dd:05.0: enabling Extended Tags [ 52.780036] pci 0000:dd:05.0: PME# supported from D0 D3hot D3cold [ 52.853091] pci 0000:dd:02.0: PCI bridge to [bus de] [ 52.913027] pci 0000:dd:03.0: PCI bridge to [bus df] [ 52.972027] pci 0000:dd:04.0: PCI bridge to [bus e0] [ 53.032028] pci 0000:dd:05.0: PCI bridge to [bus e1] [ 53.092019] iommu: Default domain type: Passthrough [ 53.151077] pci 0000:01:00.1: vgaarb: setting as boot VGA device [ 53.152000] pci 0000:01:00.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 53.326022] pci 0000:01:00.1: vgaarb: bridge control possible [ 53.394002] vgaarb: loaded [ 53.427127] SCSI subsystem initialized [ 53.472018] ACPI: bus type USB registered [ 53.520015] usbcore: registered new interface driver usbfs [ 53.586007] usbcore: registered new interface driver hub [ 53.649206] usbcore: registered new device driver usb [ 53.710034] pps_core: LinuxPPS API ver. 1 registered [ 53.769001] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 53.879027] PTP clock support registered [ 53.926279] EDAC MC: Ver: 3.0.0 [ 53.965023] Registered efivars operations [ 54.014043] PCI: Using ACPI for IRQ routing [ 54.067733] Expanded resource Reserved due to conflict with PCI Bus 0000:01 [ 54.151305] NetLabel: Initializing [ 54.192001] NetLabel: domain hash size = 128 [ 54.244002] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 54.312014] NetLabel: unlabeled traffic allowed by default [ 54.380378] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 54.454003] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 54.527223] clocksource: Switched to clocksource tsc-early [ 54.606133] VFS: Disk quotas dquot_6.6.0 [ 54.653246] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 54.735950] pnp: PnP ACPI init [ 54.773190] system 00:01: [io 0x0500-0x053f] has been reserved [ 54.844312] system 00:01: [io 0x0400-0x047f] has been reserved [ 54.915432] system 00:01: [io 0x0540-0x057f] has been reserved [ 54.986550] system 00:01: [io 0x0600-0x061f] has been reserved [ 55.057669] system 00:01: [io 0x0880-0x0883] has been reserved [ 55.128788] system 00:01: [io 0x0800-0x081f] has been reserved [ 55.199907] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved [ 55.279392] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 55.358881] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 55.438381] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 55.517869] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 55.597352] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 55.676834] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 55.756457] pnp: PnP ACPI: found 4 devices [ 55.811366] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 55.918114] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 55.977737] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 56.037359] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 56.096985] pci 0000:01:00.2: BAR 6: assigned [mem 0x90000000-0x9003ffff pref] [ 56.183789] pci 0000:00:1c.4: PCI bridge to [bus 01] [ 56.243404] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] [ 56.316617] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x99bfffff] [ 56.398194] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 56.457812] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 56.532070] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 56.606328] pci_bus 0000:00: resource 6 [io 0x03b0-0x03bb window] [ 56.680581] pci_bus 0000:00: resource 7 [io 0x03c0-0x03df window] [ 56.754838] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 56.837458] pci_bus 0000:00: resource 9 [io 0x1000-0x4fff window] [ 56.911715] pci_bus 0000:00: resource 10 [mem 0x90000000-0xa47fbfff window] [ 56.995383] pci_bus 0000:00: resource 11 [mem 0x200000000000-0x20ffffffffff window] [ 57.087420] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 57.154353] pci_bus 0000:01: resource 1 [mem 0x90000000-0x99bfffff] [ 57.229711] pci 0000:0f:00.0: BAR 6: no space for [mem size 0x00100000 pref] [ 57.314430] pci 0000:0f:00.0: BAR 6: failed to assign [mem size 0x00100000 pref] [ 57.403322] pci 0000:0e:02.0: PCI bridge to [bus 0f] [ 57.462937] pci 0000:0e:02.0: bridge window [io 0x5000-0x5fff] [ 57.536150] pci 0000:0e:02.0: bridge window [mem 0xa4a00000-0xa4afffff] [ 57.617727] pci 0000:0e:02.0: bridge window [mem 0xa4800000-0xa49fffff 64bit pref] [ 57.710804] pci_bus 0000:0e: resource 4 [io 0x5000-0x6fff window] [ 57.785059] pci_bus 0000:0e: resource 5 [mem 0xa4800000-0xae3fbfff window] [ 57.867680] pci_bus 0000:0e: resource 6 [mem 0x210000000000-0x21ffffffffff window] [ 57.958669] pci_bus 0000:0f: resource 0 [io 0x5000-0x5fff] [ 58.025604] pci_bus 0000:0f: resource 1 [mem 0xa4a00000-0xa4afffff] [ 58.100907] pci_bus 0000:0f: resource 2 [mem 0xa4800000-0xa49fffff 64bit pref] [ 58.187718] pci 0000:2a:02.0: PCI bridge to [bus 2b] [ 58.247339] pci_bus 0000:2a: resource 4 [io 0x7000-0x8fff window] [ 58.321596] pci_bus 0000:2a: resource 5 [mem 0xae400000-0xb7ffbfff window] [ 58.404217] pci_bus 0000:2a: resource 6 [mem 0x220000000000-0x22ffffffffff window] [ 58.495211] pci 0000:46:04.0: BAR 14: assigned [mem 0xb9100000-0xb91fffff] [ 58.577834] pci 0000:46:02.0: PCI bridge to [bus 47] [ 58.637456] pci 0000:48:00.0: BAR 6: assigned [mem 0xb9100000-0xb917ffff pref] [ 58.724262] pci 0000:48:00.1: BAR 6: assigned [mem 0xb9180000-0xb91fffff pref] [ 58.811067] pci 0000:46:04.0: PCI bridge to [bus 48] [ 58.870683] pci 0000:46:04.0: bridge window [mem 0xb9100000-0xb91fffff] [ 58.952260] pci 0000:46:04.0: bridge window [mem 0xb8000000-0xb90fffff 64bit pref] [ 59.045339] pci_bus 0000:46: resource 4 [io 0x9000-0xafff window] [ 59.119595] pci_bus 0000:46: resource 5 [mem 0xb8000000-0xc1bfbfff window] [ 59.202216] pci_bus 0000:46: resource 6 [mem 0x230000000000-0x23ffffffffff window] [ 59.293202] pci_bus 0000:48: resource 1 [mem 0xb9100000-0xb91fffff] [ 59.368503] pci_bus 0000:48: resource 2 [mem 0xb8000000-0xb90fffff 64bit pref] [ 59.455317] pci 0000:62:02.0: bridge window [io 0x1000-0x0fff] to [bus 63] add_size 1000 [ 59.553623] pci 0000:62:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 63] add_size 200000 add_align 100000 [ 59.691664] pci 0000:62:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 63] add_size 200000 add_align 100000 [ 59.818205] pci 0000:62:03.0: bridge window [io 0x1000-0x0fff] to [bus 64] add_size 1000 [ 59.916511] pci 0000:62:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 64] add_size 200000 add_align 100000 [ 60.054553] pci 0000:62:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus 64] add_size 200000 add_align 100000 [ 60.181096] pci 0000:62:04.0: bridge window [io 0x1000-0x0fff] to [bus 65] add_size 1000 [ 60.279406] pci 0000:62:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 65] add_size 200000 add_align 100000 [ 60.417456] pci 0000:62:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 65] add_size 200000 add_align 100000 [ 60.543997] pci 0000:62:05.0: bridge window [io 0x1000-0x0fff] to [bus 66] add_size 1000 [ 60.642303] pci 0000:62:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 66] add_size 200000 add_align 100000 [ 60.780347] pci 0000:62:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 66] add_size 200000 add_align 100000 [ 60.906891] pci 0000:62:02.0: BAR 14: assigned [mem 0xc1c00000-0xc1dfffff] [ 60.989508] pci 0000:62:02.0: BAR 15: assigned [mem 0x240000000000-0x2400001fffff 64bit pref] [ 61.091997] pci 0000:62:03.0: BAR 14: assigned [mem 0xc1e00000-0xc1ffffff] [ 61.174618] pci 0000:62:03.0: BAR 15: assigned [mem 0x240000200000-0x2400003fffff 64bit pref] [ 61.277110] pci 0000:62:04.0: BAR 14: assigned [mem 0xc2000000-0xc21fffff] [ 61.359730] pci 0000:62:04.0: BAR 15: assigned [mem 0x240000400000-0x2400005fffff 64bit pref] [ 61.462219] pci 0000:62:05.0: BAR 14: assigned [mem 0xc2200000-0xc23fffff] [ 61.544841] pci 0000:62:05.0: BAR 15: assigned [mem 0x240000600000-0x2400007fffff 64bit pref] [ 61.647332] pci 0000:62:02.0: BAR 13: assigned [io 0xb000-0xbfff] [ 61.721588] pci 0000:62:03.0: BAR 13: no space for [io size 0x1000] [ 61.797934] pci 0000:62:03.0: BAR 13: failed to assign [io size 0x1000] [ 61.878465] pci 0000:62:04.0: BAR 13: no space for [io size 0x1000] [ 61.954811] pci 0000:62:04.0: BAR 13: failed to assign [io size 0x1000] [ 62.035343] pci 0000:62:05.0: BAR 13: no space for [io size 0x1000] [ 62.111691] pci 0000:62:05.0: BAR 13: failed to assign [io size 0x1000] [ 62.192224] pci 0000:62:05.0: BAR 13: assigned [io 0xb000-0xbfff] [ 62.266477] pci 0000:62:04.0: BAR 13: no space for [io size 0x1000] [ 62.342823] pci 0000:62:04.0: BAR 13: failed to assign [io size 0x1000] [ 62.423347] pci 0000:62:03.0: BAR 13: no space for [io size 0x1000] [ 62.499696] pci 0000:62:03.0: BAR 13: failed to assign [io size 0x1000] [ 62.580226] pci 0000:62:02.0: BAR 13: no space for [io size 0x1000] [ 62.656574] pci 0000:62:02.0: BAR 13: failed to assign [io size 0x1000] [ 62.737105] pci 0000:62:02.0: PCI bridge to [bus 63] [ 62.796723] pci 0000:62:02.0: bridge window [mem 0xc1c00000-0xc1dfffff] [ 62.878300] pci 0000:62:02.0: bridge window [mem 0x240000000000-0x2400001fffff 64bit pref] [ 62.979744] pci 0000:62:03.0: PCI bridge to [bus 64] [ 63.039358] pci 0000:62:03.0: bridge window [mem 0xc1e00000-0xc1ffffff] [ 63.120934] pci 0000:62:03.0: bridge window [mem 0x240000200000-0x2400003fffff 64bit pref] [ 63.222380] pci 0000:62:04.0: PCI bridge to [bus 65] [ 63.281995] pci 0000:62:04.0: bridge window [mem 0xc2000000-0xc21fffff] [ 63.363570] pci 0000:62:04.0: bridge window [mem 0x240000400000-0x2400005fffff 64bit pref] [ 63.465015] pci 0000:62:05.0: PCI bridge to [bus 66] [ 63.524630] pci 0000:62:05.0: bridge window [io 0xb000-0xbfff] [ 63.597842] pci 0000:62:05.0: bridge window [mem 0xc2200000-0xc23fffff] [ 63.679419] pci 0000:62:05.0: bridge window [mem 0x240000600000-0x2400007fffff 64bit pref] [ 63.780863] pci_bus 0000:62: resource 4 [io 0xb000-0xbfff window] [ 63.855117] pci_bus 0000:62: resource 5 [mem 0xc1c00000-0xcaffbfff window] [ 63.937737] pci_bus 0000:62: resource 6 [mem 0x240000000000-0x24ffffffffff window] [ 64.028726] pci_bus 0000:63: resource 1 [mem 0xc1c00000-0xc1dfffff] [ 64.104026] pci_bus 0000:63: resource 2 [mem 0x240000000000-0x2400001fffff 64bit pref] [ 64.199192] pci_bus 0000:64: resource 1 [mem 0xc1e00000-0xc1ffffff] [ 64.274493] pci_bus 0000:64: resource 2 [mem 0x240000200000-0x2400003fffff 64bit pref] [ 64.369664] pci_bus 0000:65: resource 1 [mem 0xc2000000-0xc21fffff] [ 64.444965] pci_bus 0000:65: resource 2 [mem 0x240000400000-0x2400005fffff 64bit pref] [ 64.540135] pci_bus 0000:66: resource 0 [io 0xb000-0xbfff] [ 64.607071] pci_bus 0000:66: resource 1 [mem 0xc2200000-0xc23fffff] [ 64.682373] pci_bus 0000:66: resource 2 [mem 0x240000600000-0x2400007fffff 64bit pref] [ 64.777550] pci_bus 0000:80: resource 4 [mem 0xcb800000-0xd4ffbfff window] [ 64.860169] pci_bus 0000:80: resource 5 [mem 0x250000000000-0x25ffffffffff window] [ 64.951154] pci 0000:83:02.0: PCI bridge to [bus 84] [ 65.010774] pci_bus 0000:83: resource 4 [io 0xc000-0xcfff window] [ 65.085030] pci_bus 0000:83: resource 5 [mem 0xd5000000-0xdebfbfff window] [ 65.167651] pci_bus 0000:83: resource 6 [mem 0x260000000000-0x26ffffffffff window] [ 65.258634] pci 0000:a1:02.0: PCI bridge to [bus a2] [ 65.318255] pci_bus 0000:a1: resource 4 [io 0xd000-0xdfff window] [ 65.392507] pci_bus 0000:a1: resource 5 [mem 0xdec00000-0xe87fbfff window] [ 65.475127] pci_bus 0000:a1: resource 6 [mem 0x270000000000-0x27ffffffffff window] [ 65.566116] pci 0000:bf:02.0: PCI bridge to [bus c0] [ 65.625735] pci_bus 0000:bf: resource 4 [io 0xe000-0xefff window] [ 65.699986] pci_bus 0000:bf: resource 5 [mem 0xe8800000-0xf23fbfff window] [ 65.782608] pci_bus 0000:bf: resource 6 [mem 0x280000000000-0x28ffffffffff window] [ 65.873592] pci 0000:dd:02.0: bridge window [io 0x1000-0x0fff] to [bus de] add_size 1000 [ 65.971896] pci 0000:dd:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus de] add_size 200000 add_align 100000 [ 66.109939] pci 0000:dd:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus de] add_size 200000 add_align 100000 [ 66.236481] pci 0000:dd:03.0: bridge window [io 0x1000-0x0fff] to [bus df] add_size 1000 [ 66.334785] pci 0000:dd:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus df] add_size 200000 add_align 100000 [ 66.472830] pci 0000:dd:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus df] add_size 200000 add_align 100000 [ 66.599370] pci 0000:dd:04.0: bridge window [io 0x1000-0x0fff] to [bus e0] add_size 1000 [ 66.697677] pci 0000:dd:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus e0] add_size 200000 add_align 100000 [ 66.835720] pci 0000:dd:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus e0] add_size 200000 add_align 100000 [ 66.962261] pci 0000:dd:05.0: bridge window [io 0x1000-0x0fff] to [bus e1] add_size 1000 [ 67.060567] pci 0000:dd:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus e1] add_size 200000 add_align 100000 [ 67.198611] pci 0000:dd:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus e1] add_size 200000 add_align 100000 [ 67.325153] pci 0000:dd:02.0: BAR 14: assigned [mem 0xf2400000-0xf25fffff] [ 67.407773] pci 0000:dd:02.0: BAR 15: assigned [mem 0x290000000000-0x2900001fffff 64bit pref] [ 67.510262] pci 0000:dd:03.0: BAR 14: assigned [mem 0xf2600000-0xf27fffff] [ 67.592882] pci 0000:dd:03.0: BAR 15: assigned [mem 0x290000200000-0x2900003fffff 64bit pref] [ 67.695371] pci 0000:dd:04.0: BAR 14: assigned [mem 0xf2800000-0xf29fffff] [ 67.777992] pci 0000:dd:04.0: BAR 15: assigned [mem 0x290000400000-0x2900005fffff 64bit pref] [ 67.880481] pci 0000:dd:05.0: BAR 14: assigned [mem 0xf2a00000-0xf2bfffff] [ 67.963105] pci 0000:dd:05.0: BAR 15: assigned [mem 0x290000600000-0x2900007fffff 64bit pref] [ 68.065592] pci 0000:dd:02.0: BAR 13: assigned [io 0xf000-0xffff] [ 68.139851] pci 0000:dd:03.0: BAR 13: no space for [io size 0x1000] [ 68.216198] pci 0000:dd:03.0: BAR 13: failed to assign [io size 0x1000] [ 68.296731] pci 0000:dd:04.0: BAR 13: no space for [io size 0x1000] [ 68.373076] pci 0000:dd:04.0: BAR 13: failed to assign [io size 0x1000] [ 68.453605] pci 0000:dd:05.0: BAR 13: no space for [io size 0x1000] [ 68.529952] pci 0000:dd:05.0: BAR 13: failed to assign [io size 0x1000] [ 68.610487] pci 0000:dd:05.0: BAR 13: assigned [io 0xf000-0xffff] [ 68.684739] pci 0000:dd:04.0: BAR 13: no space for [io size 0x1000] [ 68.761086] pci 0000:dd:04.0: BAR 13: failed to assign [io size 0x1000] [ 68.841616] pci 0000:dd:03.0: BAR 13: no space for [io size 0x1000] [ 68.917964] pci 0000:dd:03.0: BAR 13: failed to assign [io size 0x1000] [ 68.998494] pci 0000:dd:02.0: BAR 13: no space for [io size 0x1000] [ 69.074842] pci 0000:dd:02.0: BAR 13: failed to assign [io size 0x1000] [ 69.155374] pci 0000:dd:02.0: PCI bridge to [bus de] [ 69.214990] pci 0000:dd:02.0: bridge window [mem 0xf2400000-0xf25fffff] [ 69.296566] pci 0000:dd:02.0: bridge window [mem 0x290000000000-0x2900001fffff 64bit pref] [ 69.398013] pci 0000:dd:03.0: PCI bridge to [bus df] [ 69.457626] pci 0000:dd:03.0: bridge window [mem 0xf2600000-0xf27fffff] [ 69.539202] pci 0000:dd:03.0: bridge window [mem 0x290000200000-0x2900003fffff 64bit pref] [ 69.640649] pci 0000:dd:04.0: PCI bridge to [bus e0] [ 69.700263] pci 0000:dd:04.0: bridge window [mem 0xf2800000-0xf29fffff] [ 69.781838] pci 0000:dd:04.0: bridge window [mem 0x290000400000-0x2900005fffff 64bit pref] [ 69.883284] pci 0000:dd:05.0: PCI bridge to [bus e1] [ 69.942900] pci 0000:dd:05.0: bridge window [io 0xf000-0xffff] [ 70.016112] pci 0000:dd:05.0: bridge window [mem 0xf2a00000-0xf2bfffff] [ 70.097687] pci 0000:dd:05.0: bridge window [mem 0x290000600000-0x2900007fffff 64bit pref] [ 70.199131] pci_bus 0000:dd: resource 4 [io 0xf000-0xffff window] [ 70.273384] pci_bus 0000:dd: resource 5 [mem 0xf2400000-0xfb7fbfff window] [ 70.356002] pci_bus 0000:dd: resource 6 [mem 0x290000000000-0x29ffffffffff window] [ 70.446988] pci_bus 0000:de: resource 1 [mem 0xf2400000-0xf25fffff] [ 70.522289] pci_bus 0000:de: resource 2 [mem 0x290000000000-0x2900001fffff 64bit pref] [ 70.617459] pci_bus 0000:df: resource 1 [mem 0xf2600000-0xf27fffff] [ 70.692762] pci_bus 0000:df: resource 2 [mem 0x290000200000-0x2900003fffff 64bit pref] [ 70.787932] pci_bus 0000:e0: resource 1 [mem 0xf2800000-0xf29fffff] [ 70.863234] pci_bus 0000:e0: resource 2 [mem 0x290000400000-0x2900005fffff 64bit pref] [ 70.958403] pci_bus 0000:e1: resource 0 [io 0xf000-0xffff] [ 71.025339] pci_bus 0000:e1: resource 1 [mem 0xf2a00000-0xf2bfffff] [ 71.100641] pci_bus 0000:e1: resource 2 [mem 0x290000600000-0x2900007fffff 64bit pref] [ 71.195923] NET: Registered protocol family 2 [ 71.248680] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes) [ 71.346206] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 71.436739] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 71.517415] TCP: Hash tables configured (established 524288 bind 65536) [ 71.597348] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes) [ 71.681256] UDP hash table entries: 65536 (order: 9, 2097152 bytes) [ 71.756877] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes) [ 71.837896] NET: Registered protocol family 1 [ 71.890200] NET: Registered protocol family 44 [ 71.943888] pci 0000:01:00.1: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 72.044295] pci 0000:01:00.1: pci_fixup_video+0x0/0x110 took 98055 usecs [ 72.125475] PCI: CLS 64 bytes, default 64 [ 72.173636] Unpacking initramfs... [ 73.206490] Freeing initrd memory: 89452K [ 73.254821] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 73.332214] software IO TLB: mapped [mem 0x6b800000-0x6f800000] (64MB) [ 73.558799] Initialise system trusted keyrings [ 73.612149] Key type blacklist registered [ 73.660377] workingset: timestamp_bits=36 max_order=27 bucket_order=0 [ 73.739105] zbud: loaded [ 73.769781] pstore: using deflate compression [ 73.822559] Platform Keyring initialized [ 74.405819] NET: Registered protocol family 38 [ 74.459165] Key type asymmetric registered [ 74.508330] tsc: Refined TSC clocksource calibration: 2194.843 MHz [ 74.582590] Asymmetric key parser 'x509' registered [ 74.582632] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa32b623c0, max_idle_ns: 440795289684 ns [ 74.641173] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 74.850377] clocksource: Switched to clocksource tsc [ 74.850601] io scheduler mq-deadline registered [ 74.964650] io scheduler kyber registered [ 75.012928] io scheduler bfq registered [ 75.059836] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 75.144000] pcieport 0000:00:1c.0: Signaling with IRQ 130 [ 75.209196] pcieport 0000:00:1c.2: Signaling with IRQ 131 [ 75.274362] pcieport 0000:00:1c.3: Signaling with IRQ 132 [ 75.339556] pcieport 0000:00:1c.4: Signaling with IRQ 133 [ 75.404761] pcieport 0000:00:1c.5: Signaling with IRQ 134 [ 75.469903] pcieport 0000:0e:02.0: Signaling with IRQ 135 [ 75.535010] pcieport 0000:2a:02.0: Signaling with IRQ 136 [ 75.600168] pcieport 0000:46:02.0: Signaling with IRQ 137 [ 75.665289] pcieport 0000:46:04.0: Signaling with IRQ 138 [ 75.730414] pcieport 0000:62:02.0: Signaling with IRQ 139 [ 75.795427] pcieport 0000:62:02.0: Slot #13 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 75.976976] pcieport 0000:62:03.0: Signaling with IRQ 140 [ 76.041985] pcieport 0000:62:03.0: Slot #14 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 76.223482] pcieport 0000:62:04.0: Signaling with IRQ 141 [ 76.288490] pcieport 0000:62:04.0: Slot #15 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 76.469992] pcieport 0000:62:05.0: Signaling with IRQ 142 [ 76.535007] pcieport 0000:62:05.0: Slot #16 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 76.716582] pcieport 0000:83:02.0: Signaling with IRQ 143 [ 76.781709] pcieport 0000:a1:02.0: Signaling with IRQ 144 [ 76.846875] pcieport 0000:bf:02.0: Signaling with IRQ 145 [ 76.912033] pcieport 0000:dd:02.0: Signaling with IRQ 146 [ 76.977050] pcieport 0000:dd:02.0: Slot #29 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 77.158622] pcieport 0000:dd:03.0: Signaling with IRQ 147 [ 77.223633] pcieport 0000:dd:03.0: Slot #30 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 77.405144] pcieport 0000:dd:04.0: Signaling with IRQ 148 [ 77.470159] pcieport 0000:dd:04.0: Slot #31 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 77.651689] pcieport 0000:dd:05.0: Signaling with IRQ 149 [ 77.716698] pcieport 0000:dd:05.0: Slot #32 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 77.898366] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 77.979173] efifb: probing for efifb [ 78.022181] efifb: framebuffer at 0x98000000, using 3072k, total 3072k [ 78.100802] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 78.173138] efifb: scrolling: redraw [ 78.216124] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 78.283285] Console: switching to colour frame buffer device 128x48 [ 78.379098] fb0: EFI VGA frame buffer device [ 78.434054] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 78.523465] ACPI: Power Button [PWRF] [ 78.570060] acpi/hmat: HMAT: Memory Flags:0001 Processor Domain:0 Memory Domain:0 [ 78.660476] acpi/hmat: HMAT: Memory Flags:0001 Processor Domain:1 Memory Domain:1 [ 78.750898] acpi/hmat: HMAT: Memory Flags:0001 Processor Domain:2 Memory Domain:2 [ 78.841324] acpi/hmat: HMAT: Memory Flags:0001 Processor Domain:3 Memory Domain:3 [ 78.931750] acpi/hmat: HMAT: Locality: Flags:00 Type:Access Latency Initiator Domains:4 Target Domains:4 Base:100 [ 79.055822] acpi/hmat: Initiator-Target[0-0]:0 nsec [ 79.116807] acpi/hmat: Initiator-Target[0-1]:0 nsec [ 79.177791] acpi/hmat: Initiator-Target[0-2]:50 nsec [ 79.239828] acpi/hmat: Initiator-Target[0-3]:50 nsec [ 79.301866] acpi/hmat: Initiator-Target[1-0]:0 nsec [ 79.362846] acpi/hmat: Initiator-Target[1-1]:0 nsec [ 79.423831] acpi/hmat: Initiator-Target[1-2]:50 nsec [ 79.485866] acpi/hmat: Initiator-Target[1-3]:50 nsec [ 79.547905] acpi/hmat: Initiator-Target[2-0]:50 nsec [ 79.609935] acpi/hmat: Initiator-Target[2-1]:50 nsec [ 79.671969] acpi/hmat: Initiator-Target[2-2]:0 nsec [ 79.732957] acpi/hmat: Initiator-Target[2-3]:0 nsec [ 79.793941] acpi/hmat: Initiator-Target[3-0]:50 nsec [ 79.855972] acpi/hmat: Initiator-Target[3-1]:50 nsec [ 79.918010] acpi/hmat: Initiator-Target[3-2]:0 nsec [ 79.985290] acpi/hmat: Initiator-Target[3-3]:0 nsec [ 80.052578] acpi/hmat: HMAT: Locality: Flags:00 Type:Access Bandwidth Initiator Domains:4 Target Domains:4 Base:10 [ 80.184243] acpi/hmat: Initiator-Target[0-0]:85280 MB/s [ 80.256133] acpi/hmat: Initiator-Target[0-1]:85280 MB/s [ 80.327813] acpi/hmat: Initiator-Target[0-2]:85280 MB/s [ 80.399275] acpi/hmat: Initiator-Target[0-3]:85280 MB/s [ 80.470590] acpi/hmat: Initiator-Target[1-0]:85280 MB/s [ 80.541807] acpi/hmat: Initiator-Target[1-1]:85280 MB/s [ 80.612790] acpi/hmat: Initiator-Target[1-2]:85280 MB/s [ 80.683547] acpi/hmat: Initiator-Target[1-3]:85280 MB/s [ 80.754187] acpi/hmat: Initiator-Target[2-0]:85280 MB/s [ 80.824714] acpi/hmat: Initiator-Target[2-1]:85280 MB/s [ 80.895003] acpi/hmat: Initiator-Target[2-2]:85280 MB/s [ 80.965095] acpi/hmat: Initiator-Target[2-3]:85280 MB/s [ 81.035037] acpi/hmat: Initiator-Target[3-0]:85280 MB/s [ 81.104850] acpi/hmat: Initiator-Target[3-1]:85280 MB/s [ 81.174443] acpi/hmat: Initiator-Target[3-2]:85280 MB/s [ 81.243829] acpi/hmat: Initiator-Target[3-3]:85280 MB/s [ 81.313173] ERST: Error Record Serialization Table (ERST) support is initialized. [ 81.407701] pstore: Registered erst as persistent store backend [ 81.483520] EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 81.602844] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 81.696855] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 81.797680] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 81.911335] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 82.005258] Non-volatile memory driver v1.3 [ 82.061547] tpm_tis STM7364:00: 2.0 TPM (device-id 0x0, rev-id 78) [ 82.169897] rdac: device handler registered [ 82.224750] hp_sw: device handler registered [ 82.280546] emc: device handler registered [ 82.334763] alua: device handler registered [ 82.389751] libphy: Fixed MDIO Bus: probed [ 82.443608] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 82.526656] ehci-pci: EHCI PCI platform driver [ 82.584879] ehci-pci 0000:01:00.4: EHCI Host Controller [ 82.652559] ehci-pci 0000:01:00.4: new USB bus registered, assigned bus number 1 [ 82.746519] ehci-pci 0000:01:00.4: irq 150, io mem 0x99b9c000 [ 82.827040] ehci-pci 0000:01:00.4: USB 2.0 started, EHCI 1.00 [ 82.901158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 83.005938] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 83.098277] usb usb1: Product: EHCI Host Controller [ 83.162391] usb usb1: Manufacturer: Linux 4.18.0-305.62.1.el8_4.x86_64 ehci_hcd [ 83.256128] usb usb1: SerialNumber: 0000:01:00.4 [ 83.317625] hub 1-0:1.0: USB hub found [ 83.368479] hub 1-0:1.0: 8 ports detected [ 83.422766] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 83.503275] ohci-pci: OHCI PCI platform driver [ 83.562882] uhci_hcd: USB Universal Host Controller Interface driver [ 83.645948] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 83.715187] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 83.811491] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 83.927919] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 84.016290] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 84.122595] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 84.216454] usb usb2: Product: xHCI Host Controller [ 84.282096] usb usb2: Manufacturer: Linux 4.18.0-305.62.1.el8_4.x86_64 xhci-hcd [ 84.377349] usb usb2: SerialNumber: 0000:00:14.0 [ 84.433015] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 84.440407] hub 2-0:1.0: USB hub found [ 84.578834] hub 2-0:1.0: 16 ports detected [ 84.635984] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 84.656093] usb 1-1: New USB device found, idVendor=03f0, idProduct=7029, bcdDevice= 0.02 [ 84.706782] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 84.813222] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 84.910542] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 84.910585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 85.004953] usb 1-1: Product: Virtual Keyboard [ 85.004954] usb 1-1: Manufacturer: iLO [ 85.120013] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 85.197368] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 85.387823] usb 1-2: New USB device found, idVendor=03f0, idProduct=2227, bcdDevice= 0.01 [ 85.399817] usb usb3: Product: xHCI Host Controller [ 85.399817] usb usb3: Manufacturer: Linux 4.18.0-305.62.1.el8_4.x86_64 xhci-hcd [ 85.399819] usb usb3: SerialNumber: 0000:00:14.0 [ 85.495184] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 85.495185] usb 1-2: Product: Virtual CD-ROM [ 85.495186] usb 1-2: Manufacturer: iLO [ 86.038268] hub 3-0:1.0: USB hub found [ 86.091793] hub 3-0:1.0: 10 ports detected [ 86.149814] usbcore: registered new interface driver usbserial_generic [ 86.236961] usbserial: USB Serial support registered for generic [ 86.263014] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 86.317811] i8042: PNP: No PS/2 controller found. [ 86.470168] i8042: Probing ports directly. [ 86.531524] usb 2-3: New USB device found, idVendor=0424, idProduct=2660, bcdDevice= 8.01 [ 86.638863] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 86.734531] hub 2-3:1.0: USB hub found [ 86.788273] hub 2-3:1.0: 2 ports detected [ 87.066350] i8042: Can't read CTR while initializing i8042 [ 87.140857] i8042: probe of i8042 failed with error -5 [ 87.211276] mousedev: PS/2 mouse device common for all mice [ 87.287019] rtc_cmos 00:00: RTC can wake from S4 [ 87.351509] rtc_cmos 00:00: registered as rtc0 [ 87.413386] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 87.514178] intel_pstate: Intel P-state driver initializing [ 87.610049] EFI Variables Facility v0.08 2004-May-17 [ 87.684460] hid: raw HID events driver (C) Jiri Kosina [ 87.755364] input: iLO Virtual Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:01:00.4/usb1/1-1/1-1:1.0/0003:03F0:7029.0001/input/input1 [ 87.974612] hid-generic 0003:03F0:7029.0001: input,hidraw0: USB HID v1.10 Keyboard [iLO Virtual Keyboard] on usb-0000:01:00.4-1/input0 [ 88.139638] input: iLO Virtual Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:01:00.4/usb1/1-1/1-1:1.1/0003:03F0:7029.0002/input/input2 [ 88.309018] hid-generic 0003:03F0:7029.0002: input,hidraw1: USB HID v1.10 Mouse [iLO Virtual Keyboard] on usb-0000:01:00.4-1/input1 [ 88.471301] usbcore: registered new interface driver usbhid [ 88.548329] usbhid: USB HID core driver [ 88.604621] drop_monitor: Initializing network drop monitor service [ 88.690230] Initializing XFRM netlink socket [ 88.751649] NET: Registered protocol family 10 [ 88.815751] Segment Routing with IPv6 [ 88.869501] NET: Registered protocol family 17 [ 88.932888] mpls_gso: MPLS GSO support [ 89.023085] microcode: sig=0x606a6, pf=0x1, revision=0xd000363 [ 89.110983] microcode: Microcode Update Driver: v2.2. [ 89.122246] resctrl: L3 allocation detected [ 89.252375] resctrl: MB allocation detected [ 89.311980] resctrl: L3 monitoring detected [ 89.371391] AVX2 version of gcm_enc/dec engaged. [ 89.435950] AES CTR mode by8 optimization enabled [ 89.779172] sched_clock: Marking stable (89779156767, 0)->(141665855099, -51886698332) [ 89.884738] registered taskstats version 1 [ 89.943078] Loading compiled-in X.509 certificates [ 90.055894] Loaded X.509 cert 'Red Hat Enterprise Linux kernel signing key: 50d7cbcde40d8e71bbdeeb056f556f1e4cb31eba' [ 90.193554] Loaded X.509 cert 'Red Hat Enterprise Linux Driver Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80' [ 90.352471] Loaded X.509 cert 'Red Hat Enterprise Linux kpatch signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8' [ 90.490553] zswap: loaded using pool lzo/zbud [ 90.553682] page_owner is disabled [ 90.656026] Key type big_key registered [ 90.737750] Key type trusted registered [ 90.819311] Key type encrypted registered [ 90.877596] integrity: Loading X.509 certificate: UEFI:db [ 90.952233] integrity: Loaded X.509 cert 'Hewlett Packard Enterprise Company: HPE UEFI Secure Boot 2016 DB Key: a068bfe686eec826df935e3bb1cd36f1c2772560' [ 91.137760] integrity: Loading X.509 certificate: UEFI:db [ 91.212817] integrity: Loaded X.509 cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec' [ 91.386648] integrity: Loading X.509 certificate: UEFI:db [ 91.462115] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 91.602986] integrity: Loading X.509 certificate: UEFI:db [ 91.678779] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 91.823006] integrity: Loading X.509 certificate: UEFI:db [ 91.899138] integrity: Loaded X.509 cert 'VMware, Inc.: VMware Secure Boot Signing: 04597f3e1ffb240bba0ff0f05d5eb05f3e15f6d7' [ 92.047628] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 92.147009] integrity: Loaded X.509 cert 'Red Hat Secure Boot CA 5: cc6fa5e72868ba494e939bbd680b9144769a9f8f' [ 92.277703] ima: Allocated hash algorithm: sha256 [ 92.366126] evm: Initialising EVM extended attributes: [ 92.366174] audit: type=1807 audit(1664546586.365:2): action=measure func=KEXEC_KERNEL_CHECK res=1 [ 92.438676] evm: security.selinux [ 92.438677] evm: security.ima [ 92.438677] evm: security.capability [ 92.438677] evm: HMAC attrs: 0x1 [ 92.439708] rtc_cmos 00:00: setting system clock to 2022-09-30 14:03:58 UTC (1664546638) [ 92.557362] audit: type=1807 audit(1664546586.365:3): action=measure func=MODULE_CHECK res=1 [ 92.607606] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7 [ 93.080670] Freeing unused decrypted memory: 2036K [ 93.148997] Freeing unused kernel memory: 2480K [ 93.215031] Write protecting the kernel read-only data: 22528k [ 93.296689] Freeing unused kernel memory: 2012K [ 93.361837] Freeing unused kernel memory: 476K [ 93.465445] systemd[1]: systemd 239 (239-45.el8_4.12) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 93.792212] systemd[1]: Detected architecture x86-64. [ 93.863874] systemd[1]: Running in initial RAM disk. Welcome to Red Hat Enterprise Linux CoreOS 410.84.202209272044-0 (Ootpa) dracut-049-137.git20220131.el8_4.1 (Initramfs)! [ 94.090098] systemd[1]: No hostname configured. [ 94.155408] systemd[1]: Set hostname to . [ 94.225850] systemd[1]: Initializing machine ID from random generator. [ 94.399374] systemd[1]: Reached target Timers. [ OK ] Reached target Timers. [ 94.511300] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 94.645121] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 94.772085] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ OK ] Started Forward Password Requests to Clevis Directory Watch. [ OK ] Reached target Swap. [ OK ] Started CoreOS Tear Down Initramfs. Starting CoreOS Ignition User Config Setup... [ OK ] Listening on Open-iSCSI iscsid Socket. [ OK ] Reached target Slices. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Local Encrypted Volumes. Starting Afterburn Initrd Setup Network Kernel Arguments... [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on Journal Socket (/dev/log). Starting Journal Service... Starting Load Kernel Modules... [ 95.705235] fuse: init (API version 7.31) [ 95.720397] coreos-ignition-setup-user[1276]: File /config.ign does not exist.. Skipping copy [ OK 95.879778] systemd-modules-load[1289]: Inserted module 'fuse' 0m] Listening on[ 95.976759] systemd-modules-load[1289]: Module 'msr' is builtin Open-iSCSI iscsiuio Socket. [ 96.129608] Loading iSCSI transport class v2.0-870. [ OK ] Reached target Sockets. [ OK ] Started Memstrack Anylazing Service. [ OK ] Reached target Paths. Starting Create list of required st…ce nodes for the current kernel... Starting CoreOS: Touch /run/agetty.reload... [ OK ] Started Journal Service. [ OK 96.569046] systemd[1]: Started iSCSI UserSpace I/O driver. 0m] Started iSCSI UserSpace I/O driver. [ 96.697690] systemd[1]: systemd-vconsole-setup.service: Succeeded. [ 96.782269] systemd[1]: Started Setup Virtual Console. [ OK ] Started Setup Virtual Console. [ OK 96.909388] systemd[1]: Started CoreOS Ignition User Config Setup. 0m] Started CoreOS Ignition User Config Setup. [ 97.051763] systemd[1]: afterburn-network-kargs.service: Succeeded. [ 97.136962] systemd[1]: Started Afterburn Initrd Setup Network Kernel Arguments. [ OK ] Started Afterburn Initrd Setup Network Kernel Arguments. [ 97.320820] systemd[1]: Started Load Kernel Modules. [ OK ] Started Load Kernel Modules. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started CoreOS: Touch /run/agetty.reload. Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... Startin[ 97.716603] systemd[1]: Starting dracut ask for additional cmdline parameters... g dracut ask for additional cmdline parameters... [ OK 97.879933] systemd[1]: Started Create Static Device Nodes in /dev. 0m] Started Crea[ 97.981443] systemd[1]: Started Apply Kernel Variables. [ OK ] Started Apply Kernel Variables. [ 98.119815] systemd[1]: Started dracut ask for additional cmdline parameters. [ OK ] Started dracut ask for additional cmdline parameters. Startin[ 98.288230] systemd[1]: Starting dracut cmdline hook... g dracut cmdline[ 98.376861] dracut-cmdline[1336]: dracut-410.84.202209272044-0 dracut-049-137.git20220131.el8_4.1 hook... [ 98.500803] dracut-cmdline[1336]: Using kernel command line parameters: ip=auto BOOT_IMAGE=/images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044-0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 [ 98.788010] systemd[1]: Starting sysroot-xfs-ephemeral-mkfs.service... Startin[ 98.878095] iscsi: registered transport (tcp) g sysroot-xfs-ephemeral-mkfs.ser[ 98.966196] iscsi: registered transport (qla4xxx) vice... [ 99.035167] QLogic iSCSI HBA Driver [ 99.092242] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015) [ 99.111999] mkfs.xfs[1442]: meta-data=/run/ephemeral.xfsloop isize=512 agcount=4, agsize=16501097 blks [ 99.338375] mkfs.xfs[1442]: = sectsz=512 attr=2, projid32bit=1 [ OK 99.452687] mkfs.xfs[1442]: = crc=1 finobt=1, sparse=1, rmapbt=0 0m] Started sysr[ 99.581710] mkfs.xfs[1442]: = reflink=1 oot-xfs-ephemera[ 99.676993] mkfs.xfs[1442]: data = bsize=4096 blocks=66004388, imaxpct=25 [ 99.805024] mkfs.xfs[1442]: = sunit=0 swidth=0 blks [ 99.918250] mkfs.xfs[1442]: naming =version 2 bsize=4096 ascii-ci=0, ftype=1 [ 99.918260] mkfs.xfs[1442]: log =internal log bsize=4096 blocks=32228, version=2 Mountin[ 99.918268] mkfs.xfs[1442]: = sectsz=512 sunit=0 blks, lazy-count=1 g /run/ephemeral[ 99.918275] mkfs.xfs[1442]: realtime =none extsz=4096 blocks=0, rtextents=0 ... [ 99.918505] systemd[1]: Started sysroot-xfs-ephemeral-mkfs.service. [ 100.479724] systemd[1]: Mounting /run/ephemeral... [ 100.546824] loop: module loaded [ 100.593744] Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015) [ 100.677780] iscsi: registered transport (cxgb4i) [ 100.747430] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 100.827047] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 100.919710] iscsi: registered transport (bnx2i) [ 101.029306] iscsi: registered transport (be2iscsi) [ 101.095607] In beiscsi_module_init, tt=0000000042866768 [ 101.176124] SGI XFS with ACLs, security attributes, quota, no debug enabled [ 101.272613] XFS (loop0): Mounting V5 Filesystem [ 101.302780] systemd[1]: Started dracut cmdline hook. [ 101.338402] XFS (loop0): Ending clean mount [ OK ] Started dracut cmdline hook. [ OK 101.520521] systemd[1]: Mounted /run/ephemeral. 0m] Mounted /run/ephemeral. Startin[ 101.624731] systemd[1]: Starting dracut pre-udev hook... g dracut pre-ude[ 101.715207] device-mapper: uevent: version 1.0.3 v hook... [ 101.786603] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 101.926095] systemd[1]: Started dracut pre-udev hook. [ OK ] Started dracut pre-udev hook. Startin[ 102.043201] systemd[1]: Starting udev Kernel Device Manager... g udev Kernel Device Manager... [ OK 102.190892] systemd[1]: Started udev Kernel Device Manager. 0m] Started udev Kernel Device Manager. Startin[ 102.322214] systemd[1]: Starting dracut pre-trigger hook... g dracut pre-tri[ 102.414725] dracut-pre-trigger[1642]: rd.md=0: removing MD RAID activation gger hook... [ 102.522109] systemd[1]: Started dracut pre-trigger hook. [ OK ] Started dracut pre-trigger hook. Startin[ 102.644798] systemd[1]: Starting udev Coldplug all Devices... g udev Coldplug all Devices... Mountin[ 102.769444] systemd[1]: Mounting Kernel Configuration File System... g Kernel Configuration File Syst[ 102.879870] usb-storage 1-2:1.0: USB Mass Storage device detected em... [ 102.979143] scsi host0: usb-storage 1-2:1.0 [ 102.979655] systemd[1]: Started udev Coldplug all Devices. [ 103.038349] usbcore: registered new interface driver usb-storage [ 103.113221] systemd-udevd[1858]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ OK 103.336949] megasas: 07.714.04.00-rh1 0m] Started udev[ 103.336979] QLogic FastLinQ 4xxxx Core Module qed 8.37.0.20 Coldplug all De[ 103.488436] megaraid_sas 0000:0f:00.0: FW now in Ready state vices. [ 103.573464] megaraid_sas 0000:0f:00.0: 63 bit DMA mask and 63 bit consistent mask [ 103.664817] systemd[1]: Mounted Kernel Configuration File System. [ 103.672601] megaraid_sas 0000:0f:00.0: firmware supports msix : (128) [ OK 103.841804] megaraid_sas 0000:0f:00.0: requested/available msix 120/120 0m] Mounted Kern[ 103.945310] megaraid_sas 0000:0f:00.0: current msix/online cpus : (120/112) el Configuration[ 103.945730] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.37.0.20 [ 103.945730] File System. [ 104.045862] megaraid_sas 0000:0f:00.0: RDPQ mode : (enabled) [ 104.196841] scsi 0:0:0:0: CD-ROM iLO Virtual DVD-ROM PQ: 0 ANSI: 0 CCS [ 104.248824] megaraid_sas 0000:0f:00.0: Current firmware supports maximum commands: 5101 LDIO threshold: 0 [ 104.359267] systemd[1]: Starting udev Wait for Complete Device Initialization... [ 104.421819] qede 48:00.00: Storm FW 8.42.2.0, Management FW 8.55.43.0 [MBI 8.55.14] [eth0] [ 104.492266] qede 48:00.01: Storm FW 8.42.2.0, Management FW 8.55.43.0 [MBI 8.55.14] [eth1] [ 104.568651] megaraid_sas 0000:0f:00.0: Performance mode :Balanced (latency index = 8) [ 104.568652] megaraid_sas 0000:0f:00.0: FW supports sync cache : Yes [ 104.568654] megaraid_sas 0000:0f:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009 [ 104.656016] megaraid_sas 0000:0f:00.0: FW supports atomic descriptor : Yes [ 104.986640] systemd-udevd[1718]: Using default interface naming scheme 'rhel-8.0'. [ 104.990960] qede 0000:48:00.1 ens10f1: renamed from eth1 [ 105.132035] megaraid_sas 0000:0f:00.0: FW provided supportMaxExtLDs: 1 max_lds: 240 [ 105.202879] systemd-udevd[1718]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 105.301791] megaraid_sas 0000:0f:00.0: controller type : MR(4096MB) [ 105.301793] megaraid_sas 0000:0f:00.0: Online Controller Reset(OCR) : Enabled [ 105.374714] systemd-udevd[1858]: Using default interface naming scheme 'rhel-8.0'. [ 105.475583] megaraid_sas 0000:0f:00.0: Secure JBOD support : Yes [ 105.475585] megaraid_sas 0000:0f:00.0: NVMe passthru support : Yes [ 105.978917] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 106.062356] megaraid_sas 0000:0f:00.0: FW provided TM TaskAbort/Reset timeout : 6 secs/60 secs [ 106.250877] megaraid_sas 0000:0f:00.0: JBOD sequence map support : Yes [ 106.250877] megaraid_sas 0000:0f:00.0: PCI Lane Margining support : Yes Startin[ 106.253540] qede 0000:48:00.0 ens10f0: renamed from eth0 g udev Wait for [ 106.253564] systemd-udevd[1858]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Complete Device [ 106.339196] megaraid_sas 0000:0f:00.0: NVME page size : (4096) Initialization..[ 106.746149] megaraid_sas 0000:0f:00.0: megasas_enable_intr_fusion is called outbound_intr_mask:0x40000000 . [ 106.877807] megaraid_sas 0000:0f:00.0: INIT adapter done [ 106.953331] megaraid_sas 0000:0f:00.0: Snap dump wait time : 15 [ 107.034247] megaraid_sas 0000:0f:00.0: pci id : (0x1000)/(0x10e2)/(0x1590)/(0x0293) [ 107.137212] megaraid_sas 0000:0f:00.0: unevenspan support : no [ 107.217060] megaraid_sas 0000:0f:00.0: firmware crash dump : no [ 107.297936] megaraid_sas 0000:0f:00.0: JBOD sequence map : enabled [ 107.382303] megaraid_sas 0000:0f:00.0: Max firmware commands: 5100 shared with nr_hw_queues = 112 [ 107.498862] scsi host1: Avago SAS based MegaRAID driver [ 107.573817] sr 0:0:0:0: [sr0] scsi3-mmc drive: 12x/12x cd/rw tray [ 107.656872] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 107.794649] qedr: discovered and registered 2 RDMA funcs [ 107.952732] systemd-udevd[1899]: Using default interface naming scheme 'rhel-8.0'. [ 108.053551] systemd-udevd[1940]: Using default interface naming scheme 'rhel-8.0'. [ OK 108.154213] systemd[1]: Created slice system-rdma\x2dload\x2dmodules.slice. 0m] Created slice system-rdma\x2dload\x2dmodules.slice. Startin[ 108.307910] systemd[1]: Starting Load RDMA modules from /etc/rdma/modules/rdma.conf... g Load RDMA modules from /etc/rd[ 108.444305] iscsi: registered transport (iser) ma/modules/rdma.[ 108.516998] systemd-modules-load[1990]: Inserted module 'ib_iser' conf... [ 108.608264] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 108.654133] scsi 1:1:124:0: Enclosure BROADCOM VirtualSES 03 PQ: 0 ANSI: 7 [ 108.694404] systemd[1]: Starting Load RDMA modules from /etc/rdma/modules/roce.conf... [ 108.701894] db_root: cannot open: /etc/target Starting Load RDMA modu[ 108.994915] systemd-modules-load[1990]: Inserted module 'ib_isert' les from /etc/rd[ 109.097357] systemd-modules-load[1990]: Inserted module 'ib_srpt' ma/modules/roce.[ 109.187749] systemd-modules-load[1990]: Inserted module 'rdma_ucm' conf... [ 109.277572] systemd-modules-load[1990]: Failed to find module 'xprtrdma' [ 109.367755] systemd-modules-load[1990]: Failed to find module 'svcrdma' [ 109.367848] systemd[1]: Started udev Wait for Complete Device Initialization. [ OK ] Started udev Wait for Complete Device Initialization. [ 109.624301] systemd[1]: rdma-load-modules@rdma.service: Main process exited, code=exited, status=1/FAILURE [ 109.737885] scsi 1:3:107:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 [ 109.750044] systemd[1]: rdma-load-modules@rdma.service: Failed with result 'exit-code'. [ 109.860319] scsi 1:3:108:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 [ 109.964907] systemd[1]: Failed to start Load RDMA modules from /etc/rdma/modules/rdma.conf. [ 110.075225] scsi 1:3:109:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 [FAILED[ 110.294529] scsi 1:3:110:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 ] Failed to [ 110.420154] scsi 1:3:111:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 start Load RDMA modules from /etc/rdma/modules/rdma.conf. See 'systemctl s[ 110.596288] scsi 1:1:124:0: Attached scsi generic sg1 type 13 tatus rdma-load-[ 110.685191] scsi 1:3:107:0: Attached scsi generic sg2 type 0 modules@rdma.ser[ 110.770298] scsi 1:3:108:0: Attached scsi generic sg3 type 0 vice' for detail[ 110.855082] scsi 1:3:109:0: Attached scsi generic sg4 type 0 s. [ 110.938390] systemd[1]: Started Load RDMA modules from /etc/rdma/modules/roce.conf. [ 110.940066] scsi 1:3:110:0: Attached scsi generic sg5 type 0 [ OK 111.117562] scsi 1:3:111:0: Attached scsi generic sg6 type 0 0m] Started Load[ 111.212200] sd 1:3:107:0: [sda] 4939212288 512-byte logical blocks: (2.53 TB/2.30 TiB) RDMA modules fr[ 111.212407] sd 1:3:109:0: [sdc] 4939212288 512-byte logical blocks: (2.53 TB/2.30 TiB) om /etc/rdma/mod[ 111.212408] sd 1:3:108:0: [sdb] 4939212288 512-byte logical blocks: (2.53 TB/2.30 TiB) [ 111.212409] sd 1:3:108:0: [sdb] 4096-byte physical blocks [ 111.212520] sd 1:3:110:0: [sdd] 4939212288 512-byte logical blocks: (2.53 TB/2.30 TiB) [ 111.212521] sd 1:3:110:0: [sdd] 4096-byte physical blocks [ 111.212535] sd 1:3:108:0: [sdb] Write Protect is off [ 111.212543] sd 1:3:111:0: [sde] 1561722880 512-byte logical blocks: (800 GB/745 GiB) [ 111.212640] sd 1:3:110:0: [sdd] Write Protect is off [ 111.212644] sd 1:3:111:0: [sde] Write Protect is off [ 111.212750] sd 1:3:108:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 111.212860] sd 1:3:110:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 111.214276] sd 1:3:111:0: [sde] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 111.224892] sd 1:3:108:0: [sdb] Optimal transfer size 196608 bytes [ 111.226412] sd 1:3:110:0: [sdd] Optimal transfer size 196608 bytes [ 111.226551] sd 1:3:111:0: [sde] Optimal transfer size 65536 bytes [ 111.229357] sde: sde1 sde2 sde3 sde4 [ 111.238801] sd 1:3:110:0: [sdd] Attached SCSI disk [ 111.238802] sd 1:3:111:0: [sde] Attached SCSI disk [ 111.238803] sd 1:3:108:0: [sdb] Attached SCSI disk [ 111.323078] sd 1:3:107:0: [sda] 4096-byte physical blocks [ 111.435268] sd 1:3:109:0: [sdc] 4096-byte physical blocks [ 111.435374] sd 1:3:109:0: [sdc] Write Protect is off [ 111.547482] sd 1:3:107:0: [sda] Write Protect is off [ 111.628811] systemd[1]: Found device Virtual_DVD-ROM rhcos-410.84.202209272044-0. [ 111.805109] sd 1:3:109:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 111.872587] sd 1:3:107:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 111.974996] sd 1:3:109:0: [sdc] Optimal transfer size 196608 bytes [ 112.042672] sd 1:3:107:0: [sda] Optimal transfer size 196608 bytes [ 112.113788] sd 1:3:109:0: [sdc] Attached SCSI disk [ 112.234647] sd 1:3:107:0: [sda] Attached SCSI disk [ OK ] Found device Virtual_DVD-ROM rhcos-410.84.202209272044-0. [ OK 113.979466] systemd[1]: Reached target Network (Pre). 0m] Reached target Network (Pre). [ OK 114.095272] systemd[1]: Reached target RDMA Hardware. 0m] Reached target RDMA Hardware. Startin[ 114.212573] systemd[1]: Starting Device-Mapper Multipath Device Controller... g Device-Mapper Multipath Device Controller... [ OK 114.369442] systemd[1]: Started Device-Mapper Multipath Device Controller. 0m] Started Devi[ 114.474886] multipathd[2124]: --------start up-------- ce-Mapper Multip[ 114.553348] multipathd[2124]: read /etc/multipath.conf ath Device Contr[ 114.631952] multipathd[2124]: /etc/multipath.conf does not exist, blacklisting all devices. oller. [ 114.749539] multipathd[2124]: You can run "/sbin/mpathconf --enable" to create [ 114.845221] multipathd[2124]: /etc/multipath.conf. See man mpathconf(8) for more details [ 114.845231] multipathd[2124]: path checkers start up [ 114.845239] multipathd[2124]: /etc/multipath.conf does not exist, blacklisting all devices. [ 114.845246] multipathd[2124]: You can run "/sbin/mpathconf --enable" to create [ 114.845253] multipathd[2124]: /etc/multipath.conf. See man mpathconf(8) for more details [ 114.845295] systemd[1]: Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems (Pre). [ OK 115.463327] systemd[1]: Reached target Local File Systems. 0m] Reached target Local File Systems. Startin[ 115.591372] systemd[1]: Starting Create Volatile Files and Directories... g Create Volatile Files and Directories... Startin[ 115.738110] systemd[1]: Starting Open-iSCSI... [ 115.814350] iscsid[2134]: iscsid: can't open InitiatorName configuration file /etc/iscsi/initiatorname.iscsi [ 115.950085] iscsid[2134]: iscsid: Warning: InitiatorName file /etc/iscsi/initiatorname.iscsi does not exist or does not contain a properly formatted InitiatorName. If using software iscsi (iscsi_tcp or ib_iser) or partial offload (bnx2i or cxgbi iscsi), you may not be able to log into or discover targets. Please create a file /etc/iscsi/initiatorname.iscsi that contains a sting with the format: InitiatorName=iqn.yyyy-mm.[:identifier]. [ 115.950095] iscsid[2134]: Example: InitiatorName=iqn.2001-04.com.redhat:fc6. [ 115.950102] iscsid[2134]: If using hardware iscsi like qla4xxx this message can be ignored. [ 115.950109] iscsid[2134]: iscsid: can't open InitiatorAlias configuration file /etc/iscsi/initiatorname.iscsi [ 115.950145] systemd[1]: Started Open-iSCSI. [ OK ] Started Open-iSCSI. [ OK 116.897148] systemd[1]: Started Create Volatile Files and Directories. 0m] Started Create Volatile Files and Directories. [ OK 117.047717] systemd[1]: Reached target System Initialization. 0m] Reached target System Initialization. [ OK 117.181293] systemd[1]: Reached target Basic System. 0m] Reached target Basic System. [ 117.297168] systemd[1]: Starting Ignition (fetch-offline)... Startin[ 117.373212] ignition[2135]: fetched base config from "system" g Ignition (fetc[ 117.459442] ignition[2135]: Ignition 2.13.0 h-offline)... [ 117.526676] ignition[2135]: Stage: fetch-offline [ 117.598083] ignition[2135]: reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ OK 117.709001] systemd[1]: Started Ignition (fetch-offline). 0m] Started Igni[ 117.791117] ignition[2135]: no config dir at "/usr/lib/ignition/base.platform.d/metal" tion (fetch-offl[ 117.903709] ignition[2135]: no config URL provided ine). [ 117.978288] ignition[2135]: reading system config file "/usr/lib/ignition/user.ign" [ 118.079473] systemd[1]: Starting RHCOS Check For Legacy LUKS Configuration... Startin[ 118.174447] ignition[2135]: no config at "/usr/lib/ignition/user.ign" g RHCOS Check Fo[ 118.269195] ignition[2135]: not a config (empty): provider config was empty, continuing with empty cache config r Legacy LUKS Co[ 118.407819] ignition[2135]: fetch-offline: fetch-offline passed nfiguration... [ 118.495817] ignition[2135]: Ignition finished successfully [ 118.578870] systemd[1]: Starting Copy CoreOS Firstboot Networking Config... [ 118.578977] coreos-copy-firstboot-network[2151]: info: no files to copy from /etc/coreos-firstboot-network; skipping Starting Copy CoreOS Firstboot Networking Config... [ OK 118.867361] systemd[1]: Started RHCOS Check For Legacy LUKS Configuration. 0m] Started RHCOS Check For Legacy LUKS Configuration. [ OK 119.028954] systemd[1]: Started Copy CoreOS Firstboot Networking Config. 0m] Started Copy CoreOS Firstboot Networking Config. Startin[ 119.185748] systemd[1]: Starting dracut initqueue hook... g dracut initqueue hook... [ 119.299398] systemd[1]: Starting Ignition (kargs)... Startin[ 119.369082] ignition[2164]: Ignition 2.13.0 g Ignition (karg[ 119.436208] ignition[2164]: Stage: kargs s)... [ 119.500155] ignition[2164]: reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ 119.612743] systemd[1]: Started dracut initqueue hook. [ 119.612760] ignition[2164]: no config dir at "/usr/lib/ignition/base.platform.d/metal" [ 119.612769] ignition[2164]: kargs: kargs passed [ 119.612779] ignition[2164]: Ignition finished successfully [ OK ] Started dracut initqueue hook. [ OK 119.986068] systemd[1]: Started Ignition (kargs). 0m] Started Ignition (kargs). Startin[ 120.095028] systemd[1]: Starting Ignition (disks)... g Ignition (disk[ 120.181373] ignition[2177]: Ignition 2.13.0 s)... [ 120.248509] ignition[2177]: Stage: disks [ 120.248576] systemd[1]: Reached target Remote File Systems (Pre). [ OK 120.388206] ignition[2177]: reading system config file "/usr/lib/ignition/base.d/00-core.ign" 0m] Reached targ[ 120.508215] ignition[2177]: no config dir at "/usr/lib/ignition/base.platform.d/metal" et Remote File S[ 120.620558] ignition[2177]: disks: disks passed ystems (Pre). [ 120.691928] ignition[2177]: Ignition finished successfully [ 120.773698] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. Startin[ 120.913348] systemd[1]: Starting dracut pre-mount hook... g dracut pre-mount hook... [ OK 121.027375] systemd[1]: Started Ignition (disks). 0m] Started Ignition (disks). [ OK 121.134512] systemd[1]: Started dracut pre-mount hook. 0m] Started dracut pre-mount hook. [ OK 121.251483] systemd[1]: Reached target Initrd Root Device. 0m] Reached target Initrd Root Device. Startin[ 121.380055] systemd[1]: Starting run-media-iso-mount.service... g run-media-iso-mount.service... [ OK 121.890627] systemd[1]: Started run-media-iso-mount.service. 0m] Started run-media-iso-mount.service. Mountin[ 122.021220] systemd[1]: Mounting /sysroot... g /sysroot... [ 122.108393] systemd[1]: Starting Persist osmet files (ISO)... Starting Persist osmet [ 122.206846] squashfs: version 4.0 (2009/01/31) Phillip Lougher files (ISO)... [ OK 122.454522] systemd[1]: Mounted /sysroot. 0m] Mounted /sysroot. Startin[ 122.545395] systemd[1]: Starting OSTree Prepare OS/... g OSTree Prepare OS/... [ 123.013736] ostree-prepare-root[2220]: preparing sysroot at /sysroot [ 123.331459] ostree-prepare-root[2220]: Resolved OSTree target to: /sysroot/ostree/deploy/rhcos/deploy/2ef5f6072b5ae046e12dc2a6946792c51195a11339964bdebe00f6cd5ebbe26a.0 [ 123.530384] ostree-prepare-root[2220]: filesystem at /sysroot currently writable: 0 [ 123.631742] ostree-prepare-root[2220]: sysroot.readonly configuration value: 0 [ 123.727728] systemd[1]: sysroot-ostree-deploy-rhcos-deploy-2ef5f6072b5ae046e12dc2a6946792c51195a11339964bdebe00f6cd5ebbe26a.0.mount: Succeeded. [ 123.901039] systemd[1]: sysroot.tmp-usr.mount: Succeeded. [ 123.975174] systemd[1]: sysroot.tmp-boot.mount: Succeeded. [ 124.050221] systemd[1]: sysroot.tmp.mount: Succeeded. [ 124.119882] systemd[1]: proc-cmdline.mount: Succeeded. [ 124.190502] systemd[1]: Started OSTree Prepare OS/. [ OK ] Started OSTree Prepare OS/. Startin[ 124.311470] systemd[1]: Starting sysroot-xfs-ephemeral-setup.service... g sysroot-xfs-ephemeral-setup.service... [ OK 125.719540] systemd[1]: Started Persist osmet files (ISO). 0m] Started Persist osmet files (ISO). [ OK 127.334471] systemd[1]: Started sysroot-xfs-ephemeral-setup.service. 0m] Started sysroot-xfs-ephemeral-setup.service. Mountin[ 127.484410] systemd[1]: Mounting /sysroot/var... g /sysroot/var... [ 127.578805] systemd[1]: sysroot-etc.mount: Directory /sysroot/etc to mount over is not empty, mounting anyway. [ 127.707827] systemd[1]: Mounting /sysroot/etc... Mounting /sysroot/etc... [ OK 127.811568] systemd[1]: Mounted /sysroot/var. 0m] Mounted /sysroot/var. [ OK 127.911277] systemd[1]: Mounted /sysroot/etc. 0m] Mounted /sysroot/etc. Startin[ 128.012286] systemd[1]: Starting sysroot-relabel.service... g sysroot-relabel.service... [ OK 128.355414] systemd[1]: Started sysroot-relabel.service. 0m] Started sysroot-relabel.service. [ OK 128.477730] systemd[1]: Reached target Initrd Root File System. 0m] Reached target Initrd Root File System. [ 128.616681] systemd[1]: Starting Ignition (mount)... Startin[ 128.684484] ignition[2242]: INFO : Ignition 2.13.0 g Ignition (moun[ 128.763054] ignition[2242]: INFO : Stage: mount t)... [ 128.838618] ignition[2242]: INFO : reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ 128.960893] ignition[2242]: DEBUG : parsing config with SHA512: ff6a5153be363997e4d5d3ea8cc4048373a457c48c4a5b134a08a30aacd167c1e0f099f0bdf1e24c99ad180628cd02b767b863b5fe3a8fce3fe1886847eb8e2e [ 128.960904] ignition[2242]: INFO : no config dir at "/usr/lib/ignition/base.platform.d/metal" [ 128.960911] ignition[2242]: INFO : mount: mount passed [ 128.960919] ignition[2242]: INFO : Ignition finished successfully [ 128.960959] systemd[1]: Started Ignition (mount). [ OK ] Started Ignition (mount). Startin[ 129.580703] systemd[1]: Starting Populate OSTree /var... g Populate OSTree /var... [ 129.695382] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/lib from (null) to system_u:object_r:var_lib_t:s0 [ 129.836273] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/log from (null) to system_u:object_r:var_log_t:s0 [ 129.980738] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/home from (null) to system_u:object_r:home_root_t:s0 [ 130.126337] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/roothome from (null) to system_u:object_r:admin_home_t:s0 [ 130.284305] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/roothome/.bash_logout from (null) to system_u:object_r:admin_home_t:s0 [ 130.457018] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/roothome/.bash_profile from (null) to system_u:object_r:admin_home_t:s0 [ 130.631840] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/roothome/.bashrc from (null) to system_u:object_r:admin_home_t:s0 [ 130.801522] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/opt from (null) to system_u:object_r:var_t:s0 [ 130.940236] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/srv from (null) to system_u:object_r:var_t:s0 [ 130.940310] systemd[1]: Started Populate OSTree /var. [ OK 131.150405] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/usrlocal from (null) to system_u:object_r:var_t:s0 0m] Started Popu[ 131.300724] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/usrlocal/bin from (null) to system_u:object_r:bin_t:s0 late OSTree /var. [ 131.465179] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/usrlocal/etc from (null) to system_u:object_r:var_t:s0 [ 131.624227] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/usrlocal/games from (null) to system_u:object_r:var_t:s0 [ 131.624237] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/usrlocal/include from (null) to system_u:object_r:var_t:s0 Starting Ignition (file[ 131.624247] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/usrlocal/lib from (null) to system_u:object_r:var_t:s0 s)... [ 131.624254] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/usrlocal/man from (null) to system_u:object_r:var_t:s0 [ 131.624261] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/usrlocal/sbin from (null) to system_u:object_r:var_t:s0 [ 131.624270] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/usrlocal/share from (null) to system_u:object_r:var_t:s0 [ 131.624277] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/usrlocal/src from (null) to system_u:object_r:var_t:s0 [ 132.780567] systemd[1]: Starting Ignition (files)... [ 132.854458] ignition-ostree-populate-var[2256]: Relabeled /sysroot//var/mnt from (null) to system_u:object_r:var_t:s0 [ 132.997015] ignition[2286]: INFO : Ignition 2.13.0 [ 133.073360] ignition[2286]: INFO : Stage: files [ 133.146576] ignition[2286]: INFO : reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ 133.275569] ignition[2286]: DEBUG : parsing config with SHA512: ff6a5153be363997e4d5d3ea8cc4048373a457c48c4a5b134a08a30aacd167c1e0f099f0bdf1e24c99ad180628cd02b767b863b5fe3a8fce3fe1886847eb8e2e [ 133.515261] ignition[2286]: INFO : no config dir at "/usr/lib/ignition/base.platform.d/metal" [ 133.637344] ignition[2286]: INFO : files: ensureUsers: op(1): [started] creating or modifying user "core" [ 133.772920] ignition[2286]: DEBUG : files: ensureUsers: op(1): executing: "useradd" "--root" "/sysroot" "--create-home" "--password" "*" "--comment" "CoreOS Admin" "--groups" "adm,sudo,systemd-journal,wheel" "core" [ 135.207393] ignition[2286]: INFO : files: ensureUsers: op(1): [finished] creating or modifying user "core" [ 135.343331] ignition[2286]: INFO : files: createResultFile: createFiles: op(2): [started] writing file "/sysroot/etc/.ignition-result.json" [ 135.343340] ignition[2286]: INFO : files: createResultFile: createFiles: op(2): [finished] writing file "/sysroot/etc/.ignition-result.json" [ OK ] Started Igni[ 135.343346] ignition[2286]: INFO : files: op(3): [started] relabeling 15 patterns tion (files). [ 135.343354] ignition[2286]: DEBUG : files: op(3): executing: "setfiles" "-vF0" "-r" "/sysroot" "/sysroot/etc/selinux/targeted/contexts/files/file_contexts" "-f" "-" [ 136.043866] ignition[2286]: INFO : files: op(3): [finished] relabeling 15 patterns [ 136.043877] ignition[2286]: INFO : files: files passed [ OK 136.043887] ignition[2286]: INFO : Ignition finished successfully 0m] Reached targ[ 136.043976] systemd[1]: Started Ignition (files). et Ignition Comp[ 136.404447] systemd[1]: Reached target Ignition Complete. lete. [ 136.486096] systemd[1]: Starting Reload Configuration from the Real Root... Starting Reload Configuration from the Real Root... [ 136.653827] systemd[1]: Reloading. Stoppin[ 136.826848] systemd[1]: Stopping Device-Mapper Multipath Device Controller... g Device-Mapper [ 136.944174] multipathd[2124]: exit (signal) Multipath Device[ 137.011083] multipathd[2124]: --------shut down------- Controller... [ OK 137.094590] systemd[1]: multipathd.service: Succeeded. 0m] Stopped Devi[ 137.187191] systemd[1]: Stopped Device-Mapper Multipath Device Controller. ce-Mapper Multipath Device Controller. [ 137.318626] systemd[1]: initrd-parse-etc.service: Succeeded. [ 137.400463] systemd[1]: Started Reload Configuration from the Real Root. [ OK ] Started Reload Configuration from the Real Root. [ OK 137.570756] systemd[1]: Reached target Initrd File Systems. 0m] Reached target Initrd File Systems. [ OK 137.699302] systemd[1]: Reached target Initrd Default Target. 0m] Reached target Initrd Default Target. Startin[ 137.834093] systemd[1]: Starting dracut pre-pivot and cleanup hook... g dracut pre-piv[ 137.941301] dracut-pre-pivot[2410]: Sep 30 14:04:43 | /etc/multipath.conf does not exist, blacklisting all devices. ot and cleanup hook... [ 138.083891] dracut-pre-pivot[2410]: Sep 30 14:04:43 | /etc/multipath.conf does not exist, blacklisting all devices. [ 138.227187] dracut-pre-pivot[2410]: Sep 30 14:04:43 | You can run "/sbin/mpathconf --enable" to create [ OK ] Started dracut pre-pivot and cleanup hook. [ 138.351898] dracut-pre-pivot[2410]: Sep 30 14:04:43 | You can run "/sbin/mpathconf --enable" to create [ 138.524091] dracut-pre-pivot[2410]: Sep 30 14:04:43 | /etc/multipath.conf. See man mpathconf(8) for more details Starting Cleaning Up and Shutting Down Daemons... [ 138.659098] dracut-pre-pivot[2410]: Sep 30 14:04:43 | /etc/multipath.conf. See man mpathconf(8) for more details [ OK 138.848515] systemd[1]: Started dracut pre-pivot and cleanup hook. 0m] Stopped Core[ 138.951720] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... OS: Touch /run/a[ 139.050151] systemd[1]: coreos-touch-run-agetty.service: Succeeded. getty.reload. [ 139.142379] systemd[1]: Stopped CoreOS: Touch /run/agetty.reload. [ 139.231385] systemd[1]: Stopped target Timers. [ OK ] Stopped target Timers. [ OK 139.343199] systemd[1]: Stopped target RDMA Hardware. 0m] Stopped target RDMA Hardware. [ 139.459310] systemd[1]: clevis-luks-askpass.path: Succeeded. [ 139.538144] systemd[1]: Stopped Forward Password Requests to Clevis Directory Watch. [ OK ] Stopped Forward Password Requests to Clevis Directory Watch. [ 139.731527] systemd[1]: coreos-liveiso-persist-osmet.service: Succeeded. [ 139.822815] systemd[1]: Stopped Persist osmet files (ISO). [ OK ] Stopped Persist osmet files (ISO). [ OK 139.960585] systemd[1]: Stopped target Network (Pre). 0m] Stopped target Network (Pre). [ 140.076469] systemd[1]: dracut-pre-pivot.service: Succeeded. [ 140.154858] systemd[1]: Stopped dracut pre-pivot and cleanup hook. [ OK ] Stopped dracut pre-pivot and cleanup hook. [ OK 140.307343] systemd[1]: Stopped target Initrd Default Target. 0m] Stopped target Initrd Default Target. [ OK 140.441313] systemd[1]: Stopped target Initrd Root Device. 0m] Stopped target Initrd Root Device. [ OK 140.568225] systemd[1]: Stopped target Remote File Systems. 0m] Stopped target Remote File Systems. [ 140.696285] systemd[1]: Stopped target Remote File Systems (Pre). [ OK ] Stopped target Remote File Systems (Pre). [ 140.837432] systemd[1]: dracut-pre-mount.service: Succeeded. [ 140.914674] systemd[1]: Stopped dracut pre-mount hook. [ OK ] Stopped dracut pre-mount hook. [ OK 141.043772] systemd[1]: dracut-initqueue.service: Succeeded. 0m] Stopped drac[ 141.137300] systemd[1]: Stopped dracut initqueue hook. ut initqueue hook. Stoppin[ 141.229411] systemd[1]: Stopping Open-iSCSI... [ 141.307906] iscsid[2134]: iscsid: iscsid shutting down. [ 141.387464] systemd[1]: Stopped target Ignition Complete. [ OK ] Stopped target Ignition Complete. [ 141.518289] systemd[1]: ignition-fetch-offline.service: Succeeded. [ 141.600511] systemd[1]: Stopped Ignition (fetch-offline). [ OK ] Stopped Ignition (fetch-offline). [ 141.731304] systemd[1]: coreos-ignition-setup-user.service: Succeeded. [ 141.817410] systemd[1]: Stopped CoreOS Ignition User Config Setup. [ OK ] Stopped CoreOS Ignition User Config Setup. [ 141.969623] systemd[1]: ignition-files.service: Succeeded. [ 142.043050] systemd[1]: Stopped Ignition (files). [ OK ] Stopped Ignition (files). [ 142.150861] systemd[1]: ignition-ostree-populate-var.service: Succeeded. [ OK 142.239004] systemd[1]: Stopped Populate OSTree /var. 0m] Stopped Populate OSTree /var. Stoppin[ 142.347881] systemd[1]: Stopping Ignition (mount)... g Ignition (moun[ 142.431814] ignition[2441]: INFO : Ignition 2.13.0 t)... [ 142.510429] ignition[2441]: INFO : Stage: umount [ 142.577545] ignition[2441]: INFO : reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ 142.577553] ignition[2441]: DEBUG : parsing config with SHA512: ff6a5153be363997e4d5d3ea8cc4048373a457c48c4a5b134a08a30aacd167c1e0f099f0bdf1e24c99ad180628cd02b767b863b5fe3a8fce3fe1886847eb8e2e [ OK 142.577560] ignition[2441]: INFO : no config dir at "/usr/lib/ignition/base.platform.d/metal" 0m] Stopped Open[ 142.577567] ignition[2441]: INFO : umount: umount passed -iSCSI. [ 142.577576] ignition[2441]: INFO : Ignition finished successfully [ 142.577618] systemd[1]: iscsid.service: Succeeded. [ 143.278354] systemd[1]: Stopped Open-iSCSI. [ OK 143.336521] systemd[1]: ignition-mount.service: Succeeded. 0m] Stopped Igni[ 143.419535] systemd[1]: Stopped Ignition (mount). tion (mount). Stoppin[ 143.506283] systemd[1]: Stopping CoreOS Tear Down Initramfs... g CoreOS Tear Do[ 143.601041] coreos-teardown-initramfs[2454]: info: taking down network device: ens10f0 [ 143.713327] coreos-teardown-initramfs[2454]: RTNETLINK answers: Operation not supported [ 143.826540] coreos-teardown-initramfs[2454]: info: taking down network device: ens10f1 [ 143.826555] systemd[1]: ignition-disks.service: Succeeded. [ 143.826572] coreos-teardown-initramfs[2454]: RTNETLINK answers: Operation not supported [ 143.826584] systemd[1]: Stopped Ignition (disks). [ 143.826599] coreos-teardown-initramfs[2454]: info: flushing all routing [ 143.826606] coreos-teardown-initramfs[2454]: info: no initramfs hostname information to propagate [ 143.826613] coreos-teardown-initramfs[2454]: info: no networking config is defined in the real root [ 143.826620] coreos-teardown-initramfs[2454]: info: skipping propagation of default networking configs [ OK ] Stopped Ignition (disks). [ OK 144.661897] systemd[1]: rhcos-fail-boot-for-legacy-luks-config.service: Succeeded. 0m] Stopped RHCO[ 144.777769] systemd[1]: Stopped RHCOS Check For Legacy LUKS Configuration. S Check For Legacy LUKS Configuration. [ OK 144.914358] systemd[1]: Stopped target Basic System. 0m] Stopped target Basic System. [ OK 145.029351] systemd[1]: Stopped target Paths. 0m] Stopped target Paths. [ OK 145.129279] systemd[1]: Stopped target Sockets. 0m] Stopped target Sockets. [ OK 145.234287] systemd[1]: Stopped target Slices. 0m] Stopped target Slices. [ OK 145.335282] systemd[1]: Stopped target System Initialization. 0m] Stopped target System Initialization. [ OK 145.469220] systemd[1]: Stopped target Local Encrypted Volumes. 0m] Stopped target Local Encrypted Volumes. [ 145.605277] systemd[1]: systemd-ask-password-console.path: Succeeded. [ 145.690838] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ 145.875573] systemd[1]: systemd-tmpfiles-setup.service: Succeeded. [ 145.958040] systemd[1]: Stopped Create Volatile Files and Directories. [ OK ] Stopped Create Volatile Files and Directories. [ OK 146.109329] systemd[1]: Stopped target Local File Systems. 0m] Stopped target Local File Systems. [ OK 146.236279] systemd[1]: Stopped target Local File Systems (Pre). 0m] Stopped target Local File Systems (Pre). [ 146.376565] systemd[1]: rdma-load-modules@roce.service: Succeeded. [ 146.458956] systemd[1]: Stopped Load RDMA modules from /etc/rdma/modules/roce.conf. [ OK ] Stopped Load RDMA modules from /etc/rdma/modules/roce.conf. [ 146.645618] systemd[1]: systemd-sysctl.service: Succeeded. [ 146.719786] systemd[1]: Stopped Apply Kernel Variables. [ OK ] Stopped Apply Kernel Variables. [ 146.841580] systemd[1]: systemd-modules-load.service: Succeeded. [ 146.921930] systemd[1]: Stopped Load Kernel Modules. [ OK ] Stopped Load Kernel Modules. [ 147.045240] systemd[1]: systemd-udev-settle.service: Succeeded. [ 147.124517] systemd[1]: Stopped udev Wait for Complete Device Initialization. [ OK ] Stopped udev Wait for Complete Device Initialization. [ 147.299619] systemd[1]: systemd-udev-trigger.service: Succeeded. [ 147.379957] systemd[1]: Stopped udev Coldplug all Devices. [ OK ] Stopped udev Coldplug all Devices. [ 147.515489] systemd[1]: dracut-pre-trigger.service: Succeeded. [ 147.593754] systemd[1]: Stopped dracut pre-trigger hook. [ OK ] Stopped dracut pre-trigger hook. [ OK 147.724558] systemd[1]: Stopped target Swap. 0m] Stopped target Swap. [ 147.820544] systemd[1]: ignition-kargs.service: Succeeded. [ 147.894365] systemd[1]: Stopped Ignition (kargs). [ OK ] Stopped Ignition (kargs). [ 148.009591] systemd[1]: coreos-copy-firstboot-network.service: Succeeded. [ 148.098738] systemd[1]: Stopped Copy CoreOS Firstboot Networking Config. [ OK ] Stopped Copy CoreOS Firstboot Networking Config. Stoppin[ 148.262445] systemd[1]: Stopping udev Kernel Device Manager... g udev Kernel Device Manager... [ 148.385315] systemd[1]: Stopping iSCSI UserSpace I/O driver... Stopping iSCSI UserSpace I/O driver... [ 148.508368] systemd[1]: iscsid.socket: Succeeded. [ 148.572243] systemd[1]: Closed Open-iSCSI iscsid Socket. [ OK ] Closed Open-iSCSI iscsid Socket. [ 148.702774] systemd[1]: iscsiuio.service: Succeeded. [ 148.769814] systemd[1]: Stopped iSCSI UserSpace I/O driver. [ OK ] Stopped iSCSI UserSpace I/O driver. [ 148.898663] systemd[1]: systemd-udevd.service: Succeeded. [ 148.970772] systemd[1]: Stopped udev Kernel Device Manager. [ OK ] Stopped udev Kernel Device Manager. [ 149.106756] systemd[1]: initrd-cleanup.service: Succeeded. [ 149.179856] systemd[1]: Started Cleaning Up and Shutting Down Daemons. [ OK ] Started Cleaning Up and Shutting Down Daemons. [ 149.338691] systemd[1]: coreos-teardown-initramfs.service: Succeeded. [ 149.423195] systemd[1]: Stopped CoreOS Tear Down Initramfs. [ OK ] Stopped CoreOS Tear Down Initramfs. [ 149.559644] systemd[1]: dracut-pre-udev.service: Succeeded. [ OK 149.633512] systemd[1]: Stopped dracut pre-udev hook. 0m] Stopped dracut pre-udev hook. [ 149.743480] systemd[1]: dracut-cmdline.service: Succeeded. [ 149.816315] systemd[1]: Stopped dracut cmdline hook. [ OK ] Stopped dracut cmdline hook. [ 149.931241] systemd[1]: dracut-cmdline-ask.service: Succeeded. [ 150.008033] systemd[1]: Stopped dracut ask for additional cmdline parameters. [ OK ] Stopped dracut ask for additional cmdline parameters. [ 150.175582] systemd[1]: systemd-tmpfiles-setup-dev.service: Succeeded. [ 150.260794] systemd[1]: Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create Static Device Nodes in /dev. [ 150.412551] systemd[1]: kmod-static-nodes.service: Succeeded. [ 150.488534] systemd[1]: Stopped Create list of required static device nodes for the current kernel. [ OK ] Stopped Create list of required sta…vice nodes for the current kernel. [ 150.705402] systemd[1]: systemd-udevd-control.socket: Succeeded. [ 150.784868] systemd[1]: Closed udev Control Socket. [ OK ] Closed udev Control Socket. [ OK 150.903475] systemd[1]: systemd-udevd-kernel.socket: Succeeded. 0m] Closed udev [ 150.998476] systemd[1]: Closed udev Kernel Socket. Kernel Socket. Startin[ 151.085486] systemd[1]: Starting Cleanup udevd DB... g Cleanup udevd DB... [ 151.189379] systemd[1]: iscsiuio.socket: Succeeded. [ 151.254972] systemd[1]: Closed Open-iSCSI iscsiuio Socket. [ OK ] Closed Open-iSCSI iscsiuio Socket. [ OK 151.389791] systemd[1]: initrd-udevadm-cleanup-db.service: Succeeded. 0m] Started Clea[ 151.491165] systemd[1]: Started Cleanup udevd DB. nup udevd DB. [ OK 151.576761] systemd[1]: Reached target Switch Root. 0m] Reached target Switch Root. Startin[ 151.687664] systemd[1]: Starting Switch Root... g Switch Root... [ 151.782566] systemd[1]: Switching root. [ 151.835564] printk: systemd-journal: 5 output lines suppressed due to ratelimiting [ 152.162114] printk: systemd: 21 output lines suppressed due to ratelimiting [ 152.656079] audit: type=1404 audit(1664546698.715:4): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1 [ 152.982782] SELinux: policy capability network_peer_controls=1 [ 153.061418] SELinux: policy capability open_perms=1 [ 153.128460] SELinux: policy capability extended_socket_class=1 [ 153.207020] SELinux: policy capability always_check_network=0 [ 153.284491] SELinux: policy capability cgroup_seclabel=1 [ 153.356687] SELinux: policy capability nnp_nosuid_transition=1 [ 153.467621] audit: type=1403 audit(1664546699.526:5): auid=4294967295 ses=4294967295 lsm=selinux res=1 [ 153.468626] systemd[1]: Successfully loaded SELinux policy in 812.683ms. [ 153.706126] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 25.185ms. [ 153.802389] systemd[1]: systemd 239 (239-45.el8_4.12) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 154.121226] systemd[1]: Detected architecture x86-64. [ 154.190238] systemd[1]: Running with unpopulated /etc. Welcome to Red Hat Enterprise Linux CoreOS 410.84.202209272044-0 (Ootpa)! [ 154.375074] systemd[1]: Initializing machine ID from random generator. [ 156.496808] systemd[1]: Populated /etc with preset unit settings. [ 156.613288] systemd[1]: /usr/lib/systemd/system/bootupd.service:22: Unknown lvalue 'ProtectHostname' in section 'Service' [ 156.771065] systemd[1]: systemd-journald.service: Succeeded. [ 156.848309] systemd[1]: initrd-switch-root.service: Succeeded. [ 156.927403] systemd[1]: Stopped Switch Root. [ OK ] Stopped Switch Root. [ 157.032977] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart. [ 157.166627] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 157.166653] systemd[1]: Stopped Journal Service. [ OK ] Stopped Journal Service. [ 157.397999] systemd[1]: Starting Journal Service... Starting Journal Service... [ 157.507132] systemd[1]: Stopped target Switch Root. [ OK ] Stopped target Switch Root. [ 157.627345] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 157.759222] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 157.886533] systemd[1]: Started Forward Password Requests to Clevis Directory Watch. [ OK ] Started Forward Password Requests to Clevis Directory Watch. [ 158.077516] systemd[1]: sysroot-xfs-ephemeral-mkfs.service: Succeeded. [ 158.165128] systemd[1]: Stopped sysroot-xfs-ephemeral-mkfs.service. [ OK ] Stopped sysroot-xfs-ephemeral-mkfs.service. [ 158.318486] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 158.511631] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 158.655207] systemd[1]: Listening on LVM2 poll daemon socket. [ OK ] Listening on LVM2 poll daemon socket. [ 158.797413] systemd[1]: sysroot-xfs-ephemeral-setup.service: Succeeded. [ 158.886052] systemd[1]: Stopped sysroot-xfs-ephemeral-setup.service. [ OK ] Stopped sysroot-xfs-ephemeral-setup.service. [ 159.043196] systemd[1]: Reached target Synchronize afterburn-sshkeys@.service template instances. [ OK ] Reached target Synchronize afterbur…hkeys@.service template instances. [ 159.260122] systemd[1]: Stopped target Initrd Root File System. [ OK ] Stopped target Initrd Root File System. [ 159.406461] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 159.524257] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st…ce nodes for the current kernel... [ 159.734129] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 159.840244] systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... [ 159.972395] systemd[1]: ostree-prepare-root.service: Succeeded. [ 160.053148] systemd[1]: Stopped OSTree Prepare OS/. [ OK ] Stopped OSTree Prepare OS/. [ 160.176339] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 160.321175] systemd[1]: Starting Rebuild Hardware Database... Starting Rebuild Hardware Database... [ 160.450401] systemd[1]: sysroot-relabel.service: Succeeded. [ 160.526618] systemd[1]: Stopped sysroot-relabel.service. [ OK ] Stopped sysroot-relabel.service. [ 160.657431] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ 160.880847] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 161.023073] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 161.133125] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 161.271078] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 161.404143] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... [ 161.533908] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ OK ] Listening on Device-mapper event daemon FIFOs. [ 161.694291] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... Starting Monitoring of LVM2 mirrors…ng dmeventd or progress polling... [ 161.916129] systemd[1]: Reached target Local Encrypted Volumes (Pre). [ OK ] Reached target Local Encrypted Volumes (Pre). [ 162.074656] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 162.209123] systemd[1]: Stopped target Initrd File Systems. [ OK ] Stopped target Initrd File Systems. [ 162.347361] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 162.469551] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 162.656137] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 162.800463] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 162.959714] systemd[1]: Created slice system-sshd\x2dkeygen.slice. [ OK ] Created slice system-sshd\x2dkeygen.slice. [ 163.110398] systemd[1]: run-media-iso-mount.service: Succeeded. [ 163.190084] systemd[1]: Stopped run-media-iso-mount.service. [ OK ] Stopped run-media-iso-mount.service. [ 163.331129] systemd[1]: Starting Create System Users... Starting Create System Users... [ 163.449724] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 163.602133] systemd[1]: Reached target Remote Encrypted Volumes. [ OK ] Reached target Remote Encrypted Volumes. [ 163.749930] systemd[1]: Starting Load/Save Random Seed... Starting Load/Save Random Seed... [ 163.873567] systemd[1]: sysroot-usr.mount: Succeeded. [ 163.942320] systemd[1]: sysroot-var.mount: Succeeded. [ 164.010955] systemd[1]: sysroot-etc.mount: Succeeded. [ 164.079525] systemd[1]: sysroot-boot.mount: Succeeded. [ 164.149110] systemd[1]: sysroot-sysroot.mount: Succeeded. [ 164.221911] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Load Kernel Modules. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Rebuild Hardware Database. [ OK ] Mounted Huge Pages File System. [ OK ] Started Create System Users. [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Coldplug all Devices. Starting udev Wait for Complete Device Initialization... Starting Create Static Device Nodes in /dev... Mounting FUSE Control File System... Starting Apply Kernel Variables... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Mounted FUSE Control File System. [ OK ] Started Apply Kernel Variables. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Flush Journal to Persistent Storage. Starting Load RDMA modules from /etc/rdma/modules/roce.conf... Starting Load RDMA modules from /etc/rdma/modules/rdma.conf... Starting RDMA Node Description Daemon... [ OK ] Started Load RDMA modules from /etc/rdma/modules/roce.conf. [ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd or progress polling. [ OK ] Started RDMA Node Description Daemon. [ OK ] Started Load RDMA modules from /etc/rdma/modules/rdma.conf. [ OK ] Reached target Network (Pre). [ OK ] Reached target RDMA Hardware. [ OK ] Started udev Wait for Complete Device Initialization. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Restore /run/initramfs on shutdown... Starting Run update-ca-trust... Starting Rebuild Journal Catalog... Starting Create Volatile Files and Directories... Starting Rebuild Dynamic Linker Cache... [ OK ] Started Restore /run/initramfs on shutdown. [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Create Volatile Files and Directories. Starting Security Auditing Service... Starting RHCOS Fix SELinux Labeling For /usr/local/sbin... [ OK ] Started Run update-ca-trust. [ OK ] Started RHCOS Fix SELinux Labeling For /usr/local/sbin. [ OK ] Started Security Auditing Service. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Dynamic Linker Cache. Starting Update is Completed... [ OK ] Started Update is Completed. [ OK ] Reached target System Initialization. [ OK ] Started daily update of the root trust anchor for DNSSEC. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Started Monitor console-login-helpe…ue snippets directory for changes. [ OK ] Started OSTree Monitor Staged Deployment. [ OK ] Reached target Paths. [ OK ] Listening on bootupd.socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting OpenSSH ed25519 Server Key Generation... Starting Generation of shadow ID ranges for CRI-O... Starting Copy CoreOS Interactive Live MOTD... Starting Check if Ignition config is provided... [ OK ] Started irqbalance daemon. Starting NTP client/server... Starting Load CPU microcode update... Starting CoreOS Generate iSCSI Initiator Name... [ OK ] Started D-Bus System Message Bus. Starting System Security Services Daemon... Starting OpenSSH ecdsa Server Key Generation... Starting OpenSSH rsa Server Key Generation... Starting Network Manager... Starting Generate console-login-helper-messages issue snippet... [ OK ] Started OpenSSH ed25519 Server Key Generation. [ OK ] Started Copy CoreOS Interactive Live MOTD. [ OK ] Started Check if Ignition config is provided. [ OK ] Started CoreOS Generate iSCSI Initiator Name. [ OK ] Started OpenSSH ecdsa Server Key Generation. [ OK ] Started OpenSSH rsa Server Key Generation. [ OK ] Started NTP client/server. [ OK ] Reached target sshd-keygen.target. Starting Generate SSH keys snippet …a console-login-helper-messages... [ OK ] Started Generate SSH keys snippet f…via console-login-helper-messages. [ OK ] Started Load CPU microcode update. [ OK ] Started System Security Services Daemon. [ OK ] Reached target User and Group Name Lookups. Starting Login Service... [ OK ] Started Generation of shadow ID ranges for CRI-O. [ OK ] Started Generate console-login-helper-messages issue snippet. [ OK ] Started Network Manager. [ OK ] Started Login Service. Starting Hostname Service... [ OK ] Reached target Network. Starting OpenSSH server daemon... Starting Permit User Sessions... [ OK ] Started Permit User Sessions. [ OK ] Started OpenSSH server daemon. [ OK ] Started Hostname Service. Starting Network Manager Script Dispatcher Service... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyS0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started Update UTMP about System Runlevel Changes. Red Hat Enterprise Linux CoreOS 410.84.202209272044-0 (Ootpa) 4.10 Ignition: ran on 2022/09/30 14:04:41 UTC (this boot) Ignition: no config provided by user SSH host key: SHA256:CIEvgDVjBEB7DuUTQLQNv9HJoEmZoLVExxkvCfTaPjE (ED25519) SSH host key: SHA256:eAJZtAvFaNB8WPT0207jr9+iZBieQzuQXFBKRdmsoJE (ECDSA) SSH host key: SHA256:0d4dQEAQeeYf/U1CFRvmDhyfPZ2hq+o21pylwl5m5c0 (RSA) lo core (automatic login) Last login: Fri Sep 30 14:05:26 on tty1 ########################################################################### Welcome to the CoreOS live environment. This system is running completely from memory, making it a good candidate for hardware discovery and installing persistently to disk. Here is an example of running an install to disk via coreos-installer: sudo coreos-installer install /dev/sda \ --ignition-url https://example.com/example.ign You may configure networking via 'sudo nmcli' or 'sudo nmtui' and have that configuration persist into the installed system by passing the '--copy-network' argument to 'coreos-installer install'. Please run 'coreos-installer install --help' for more information on the possible install options. ########################################################################### [core@localhost ~]$ Secure Start verification in progress. This may take a few seconds... Recommended Terminal Window Size = 100x31 ========================================= HPE ProLiant System BIOS U46 v1.58 (01/13/2022) (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP Early system initialization, please wait... iLO 5 IPv4: iLO 5 IPv6: iLO 5 IPv4: 10.8.247.46 iLO 5 IPv6: FE80::5EBA:2CFF:FE43:832A Fail to process new found FV, FV may be corrupted! ERROR: Internal fabric error detected!! PSF PID:0xBA, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0xBC, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF InstallHeciTransportPpis, start InstallHeciTransportPpis, end [HECI CONTROL PEI] HECI Transport found: 2 [HECI] [ME] (MeType is ME_TYPE_SPS) Initialization is allowed Initialization is not allowed Initialization is not allowed 2%: System Chipset Initialization Couldn't read Flash Security Override [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) Error: Update PEI FuSa (SAF) policy! Status: Not Found LtStatusRegister[0xFED30000] = 0x0000000000004092 LtExtendedStatusError[0xFED30008] = 0x0000000000000000 BootGuardBootStatus[0xFED300A0] = 0x9D54000080002000 BootGuardAcmError[0xFED30328] = 0x00000000C0008000 MSR_BOOT_GUARD_SACM_INFO[0x0000013A] = 0x0000000F0000007D Platform Type = 10 [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) MeUmaConfigureRequestedSegmentSize: Exiting (Status = Success) 4%: UPI Link Initialization - Start [IIO](UBA) [0.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p01] 0 | 1 | 1 | 0 | 0x00 | 0 [IIO](UBA) [0 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p05] 0 | 1 | 2 | 0 | 0x00 | 0 [IIO](UBA) [0 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.4] Bifurcation = 3 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p13] 0 | 1 | 255 | 0 | 0x00 | 0 [IIO](UBA) [0 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p15] 0 | 1 | 10 | 0 | 0x00 | 0 [IIO](UBA) [0 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p17] 0 | 1 | 13 | 1 | 0x00 | 0 [IIO](UBA) [0 p18] 0 | 1 | 14 | 1 | 0x00 | 0 [IIO](UBA) [0 p19] 0 | 1 | 15 | 1 | 0x00 | 0 [IIO](UBA) [0 p20] 0 | 1 | 16 | 1 | 0x00 | 0 [IIO](UBA) [1.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p01] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p05] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.4] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p13] 0 | 1 | 3 | 0 | 0x00 | 0 [IIO](UBA) [1 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p15] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p17] 0 | 1 | 29 | 1 | 0x00 | 0 [IIO](UBA) [1 p18] 0 | 1 | 30 | 1 | 0x00 | 0 [IIO](UBA) [1 p19] 0 | 1 | 31 | 1 | 0x00 | 0 [IIO](UBA) [1 p20] 0 | 1 | 32 | 1 | 0x00 | 0 BuildCpuTopologyInfoHob: Failed to Build Cpu Info Hob 5%: UPI Link Initialization - Complete [IIO](VMD) [0] VMD disabled for RPs init. PCH Detect: MMIO base on Socket 1, is 0, skipping! WARNING: Platform does not support uplink port! [IIO](VMD) [1] VMD disabled for RPs init. 7%: Early Processor Initialization PrevBootErrors: No Memory MCA Error Found PrevBootErrors - Valid MCA UC entries: 0 9%: Memory Initialization - Start C00: REFRESH_SYNC_TIME_PerCh= 7800 C00: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C00: HostRefreshStartTime= 7800 C00: HostRefreshStartTime= 7800 C01: HostRefreshStartTime= 7807 C01: HostRefreshStartTime= 7800 C02: HostRefreshStartTime= 7809 C02: HostRefreshStartTime= 7807 C03: HostRefreshStartTime= 7793 C03: HostRefreshStartTime= 7801 C04: HostRefreshStartTime= 7703 C04: HostRefreshStartTime= 7708 C05: HostRefreshStartTime= 7800 C05: HostRefreshStartTime= 7791 C06: HostRefreshStartTime= 7789 C06: HostRefreshStartTime= 7795 C07: HostRefreshStartTime= 7790 C07: HostRefreshStartTime= 7790 EnableHostRefresh Start Write Time diff[1]=120 ns EnableHostRefresh Start Write Time diff[1]=131 ns EnableHostRefresh Start Write Time diff[2]=315 ns EnableHostRefresh Start Write Time diff[2]=220 ns EnableHostRefresh Start Write Time diff[3]=171 ns EnableHostRefresh Start Write Time diff[3]=226 ns EnableHostRefresh Start Write Time diff[4]=259 ns EnableHostRefresh Start Write Time diff[4]=230 ns EnableHostRefresh Start Write Time diff[5]=269 ns EnableHostRefresh Start Write Time diff[5]=260 ns EnableHostRefresh Start Write Time diff[6]=256 ns EnableHostRefresh Start Write Time diff[6]=229 ns EnableHostRefresh Start Write Time diff[7]=271 ns EnableHostRefresh Start Write Time diff[7]=232 ns PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found [IIO](VMD) VMD init registered on endOfPei. WARNING: 00:46:04.0: Device 1077-8070 link width trained below capability WARNING: (RPLINKCAP 0x0F7A4084, RPLINKSTS 0x00003043) WARNING: (EPLINKCAP 0x0045F083, EPLINKSTS 0x00001043) PeiMemoryBaseAddress: 0x000000000E66E000. 18%: Memory Initialization - Complete ME UMA PostMem: SendDramInitDone (): InitStat = 0 ME UMA PostMem: BiosAction = 7 ME UMA PostMem: MeDramInitDone Complete. Checking for reset... Initialization is not allowed Platform Type = 10 Fail to process new found FV, FV may be corrupted! Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 TPM Measurement - Start TPM Measurement - Complete LocatePpi status = Success [SmbusErrataFix.c] Execute EfiSmbusSendByte (0xE2) mdatabyte = 4, Status = Device Error Install SgxInit Ppi : 0 Error: SgxRegistrationStatus report error code: 0x15 SGX disabled, exiting [IIO](TH) PCH Trace Hub not accessible [IPMI] mIpmiInstance->KcsTimeoutPeriod: 0x186A0 [IPMI] BMC Device ID: 0x13, firmware version: 2.60 UpdateMode:0 IPMI Dxe:Get BMC Device Id 21%: SMBIOS Table Initialization No ME Policy Protocol availableNo ME Policy Protocol availableUsbPortXhci Dxe driver:PlatformType=10 ConvertPages: failed to find range 94000000 - 97FFFFFF AllocateManagementDeviceBarSpace: SetMemorySpaceAttributes for Flash Device region failed! Status = 00000002 25%: USB Controller Initialization 28%: Chipset Root Ports Initialization 32%: HPE Memory Initialization HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr AE. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A0. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A2. ConvertPages: failed to find range 70000000 - 77BFFFFF HpTranslateTlsCipherList (715): Input / output data is null or input data size is invalid [OtaDxe.c] OtaDxeDriverEntry() { [OtaDxe.c] OtaDxeDriverEntry() -> Create OTA Event [OtaDxe.c] OtaDxeDriverEntry() -> OTA Event creation: Success [OtaDxe.c] OtaDxeDriverEntry() } Success [OtaShellCommands.c] OtaShellCommandsEntry() { [OtaShellCommands.c] OtaShellCommandsEntry() -> Init OTA Shell Commands Table [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaShell -> Success [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaConfig -> Success [OtaShellCommands.c] OtaShellCommandsEntry() } Success Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 ConvertPages: failed to find range F0000 - FFFFF ConvertPages: failed to find range 6F800000 - 6FFFFFFF ConvertPages: failed to find range 70000000 - 77BFFFFF ConvertPages: failed to find range 77C00000 - 7FFFFFFF ConvertPages: failed to find range 80000000 - 8FFFFFFF ConvertPages: failed to find range 90000000 - 93FFFFFF ConvertPages: failed to find range 94000000 - 97FFFFFF ConvertPages: failed to find range 98000000 - 99C0FFFF ConvertPages: failed to find range 99C10000 - A47FBFFF ConvertPages: failed to find range A4800000 - AE3FBFFF ConvertPages: failed to find range AE400000 - B7FFBFFF ConvertPages: failed to find range B8000000 - C1BFBFFF ConvertPages: failed to find range C1C00000 - CAFFBFFF ConvertPages: failed to find range CB800000 - D4FFBFFF ConvertPages: failed to find range D5000000 - DEBFBFFF ConvertPages: failed to find range DEC00000 - E87FBFFF ConvertPages: failed to find range E8800000 - F23FBFFF ConvertPages: failed to find range F2400000 - FB7FBFFF ConvertPages: failed to find range FD000000 - FDFFFFFF ConvertPages: failed to find range FE000000 - FE00FFFF ConvertPages: failed to find range FE010000 - FE7FFFFF ConvertPages: failed to find range FEC00000 - FEC00FFF ConvertPages: failed to find range FEC80000 - FED00FFF ConvertPages: failed to find range 200000000000 - 29FFFFFFFFFF 36%: System Security Initialization SMBIOS Package[0] - Processor[0] SMBIOS Package[1] - Processor[56] CPU[000]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 CPU[056]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 No PMems, Crystal Ridge Drvier is not going to be loaded. [IIO](TH) Trace Hub requested memory Size is 0. Not allocating memory. [IIO](TH) PCH Trace Hub not accessible. Disabled. [IIO](TH) ERROR Failed to configure PCH Trace Hub. Status= Not Ready ERROR: IioTraceHubInitialize failed. Status= Not Ready [IIO](SPK) IioSpkSocketInitialize: SocketId: 0 [IIO](SPK) IioSpkSocketInitialize: SocketId: 1 39%: iLO Embedded Health Initialization Run PPM in DXE 43%: ACPI Table Initialization TXT is disabled MeasurementTmeState() retrun error: Not Found MeasurementMktmeState() retrun error: Not Found Measurment MSR: MRTEATVT return error Not Found Measurment MSR: MRTECPBLT return error Not Found Measurment MSR: MRTEECUEBS return error Not Found Measurment MSR: MRTEECUEMS return error Not Found Measurement failed for one or more MSRs. retrun error: Not Found Warning: SGX is disabled on this system. [SGX] SgxDisabled_SgxLateInit: Success [SGX] SgxErrorCode = 0x0 Can not load NvDimmFwUpdateDriverEntryPoint : Type 1 NVDIMM support unavailable 46%: BIOS Configuration Initialization RbsuSetupDxeEntry, failed to initial product lines feature: Unsupported CheckDebugCertificateStatus: unpack error. 53%: Early PCI Initialization - Start PciRootBridgeEnumeratorPciDeviceTable: PCI-PCI Bridge found but not in PCI Device Table, Bus=0 PciRootBridgeEnumeratorPciDeviceTable: Continuing in ~8 sec. PchUplink programming error! Can not find the Uplink x16 port. [IE_HECI-0] Resetting HECI interface (CSR 80848408/80272709) 61%: Early PCI Initialization - Complete 71%: Switching console output to Primary Video. Please wait... :INIT - BIOS_RESET_CPL: Set CPL3 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL3 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** [SGX] SgxAfterPlatformLocksCallback entry BiosParamInfo TopologyInfo CpuSvn is 0 [SGX] UpdateRegistrationPackageInfo BEGIN [SGX] UpdateRegistrationPackageInfo END ExposeAllScenariosSgxRegistrationUefiVariables Enter Expose variable [SgxRegistrationConfiguration]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 RegistrationRequestType 0 Expose variable [SgxRegistrationServerRequest]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 1 Expose variable [SgxRegistrationPackageInfo]: SetVariable: Success ExposeToOsRuntime: 0 ReadOnlyOsRuntime: 0 Expose variable [SgxRegistrationStatus]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 Success to expose Registration Variables, exiting... [SGX] SgxAfterPlatformLocksCallback exit: success (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP HPE ProLiant DL360 Gen10 Plus System ROM Version: U46 v1.58 (01/13/2022) Serial Number: CZ22080FY9 Installed System Memory: 512 GB, Available System Memory: 512 GB 2 Processor(s) detected, 56 total cores enabled, Hyperthreading is enabled Proc 1: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz Proc 2: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz UPI Speed: 11.2 GT/s Workload Profile: Virtualization - Max Performance Power Regulator Mode: Static High Performance Advanced Memory Protection Mode: Fast Fault Tolerant Memory (ADDDC) RAS Mode: Firmware First Boot Mode: UEFI (Secure Boot) HPE Memory authenticated in all populated DIMM slots. ERROR: C80000002:V801000DD I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A5320 BuildDiskDriveTable: Cannot find more legal ports for SATA drive. Done! IsDevSmartArrayCtrl: AIP GetInformation for gEfiHpSmartArrayFeatures failed! Status = Unsupported HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) PopulateAndCreateDimmCurrentConfigRecords: Unable to retrieve size of InterleaveSets variable, Status = Not Found Embedded : iLO 5 embedded health Device - Repair Required Embedded : iLO 5 embedded health Device - Repair Required System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. ERROR: C80000002:V801000A6 I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. F1 pressed continue to boot in 18 seconds... T_TEST: Build ATSR SocketIndex=0. IIO_resource.valid=1. 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 T_TEST: Build ATSR SocketIndex=1. IIO_resource.valid=1.le or errors detected ReportDmar: Could not find RAC buffer or buffer size is 0! Status = Success HeciIeSetPowerRegulatorSetting: IEPS_CMD_SET_POWER_REGULATOR_REQ FAILURE(ResponseCode: 0x78) TPM Location configured (expected values: dTPM = 0x5 = 0x5 Value at TPM Base Address (0xFED40000) = 0xA1 HierarchyChangeAuth: Response Code error! 0x000009A2 Starting all devices for entering Boot Menu. Please wait...... BootMenuEntryCallback: Qid 0x801C to BootOption 0x14 RHEL CoreOS (Live) Use the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt. The selected entry will be started automatically in 0s. EFI stub: UEFI Secure Boot is enabled. Secure Start verification in progress. This may take a few seconds... Recommended Terminal Window Size = 100x31 ========================================= HPE ProLiant System BIOS U46 v1.58 (01/13/2022) (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP Early system initialization, please wait... iLO 5 IPv4: iLO 5 IPv6: iLO 5 IPv4: 10.8.247.46 iLO 5 IPv6: FE80::5EBA:2CFF:FE43:832A Fail to process new found FV, FV may be corrupted! ERROR: Internal fabric error detected!! PSF PID:0xBA, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0xBC, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF InstallHeciTransportPpis, start InstallHeciTransportPpis, end [HECI CONTROL PEI] HECI Transport found: 2 [HECI] [ME] (MeType is ME_TYPE_SPS) Initialization is allowed Initialization is not allowed Initialization is not allowed 2%: System Chipset Initialization Couldn't read Flash Security Override [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) Error: Update PEI FuSa (SAF) policy! Status: Not Found LtStatusRegister[0xFED30000] = 0x0000000000004092 LtExtendedStatusError[0xFED30008] = 0x0000000000000000 BootGuardBootStatus[0xFED300A0] = 0x9D54000080002000 BootGuardAcmError[0xFED30328] = 0x00000000C0008000 MSR_BOOT_GUARD_SACM_INFO[0x0000013A] = 0x0000000F0000007D Platform Type = 10 [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) MeUmaConfigureRequestedSegmentSize: Exiting (Status = Success) 4%: UPI Link Initialization - Start [IIO](UBA) [0.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p01] 0 | 1 | 1 | 0 | 0x00 | 0 [IIO](UBA) [0 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p05] 0 | 1 | 2 | 0 | 0x00 | 0 [IIO](UBA) [0 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.4] Bifurcation = 3 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p13] 0 | 1 | 255 | 0 | 0x00 | 0 [IIO](UBA) [0 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p15] 0 | 1 | 10 | 0 | 0x00 | 0 [IIO](UBA) [0 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p17] 0 | 1 | 13 | 1 | 0x00 | 0 [IIO](UBA) [0 p18] 0 | 1 | 14 | 1 | 0x00 | 0 [IIO](UBA) [0 p19] 0 | 1 | 15 | 1 | 0x00 | 0 [IIO](UBA) [0 p20] 0 | 1 | 16 | 1 | 0x00 | 0 [IIO](UBA) [1.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p01] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p05] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.4] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p13] 0 | 1 | 3 | 0 | 0x00 | 0 [IIO](UBA) [1 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p15] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p17] 0 | 1 | 29 | 1 | 0x00 | 0 [IIO](UBA) [1 p18] 0 | 1 | 30 | 1 | 0x00 | 0 [IIO](UBA) [1 p19] 0 | 1 | 31 | 1 | 0x00 | 0 [IIO](UBA) [1 p20] 0 | 1 | 32 | 1 | 0x00 | 0 BuildCpuTopologyInfoHob: Failed to Build Cpu Info Hob 5%: UPI Link Initialization - Complete [IIO](VMD) [0] VMD disabled for RPs init. PCH Detect: MMIO base on Socket 1, is 0, skipping! WARNING: Platform does not support uplink port! [IIO](VMD) [1] VMD disabled for RPs init. 7%: Early Processor Initialization PrevBootErrors: No Memory MCA Error Found PrevBootErrors - Valid MCA UC entries: 0 9%: Memory Initialization - Start C00: REFRESH_SYNC_TIME_PerCh= 7800 C00: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C00: HostRefreshStartTime= 7800 C00: HostRefreshStartTime= 7800 C01: HostRefreshStartTime= 7807 C01: HostRefreshStartTime= 7800 C02: HostRefreshStartTime= 7809 C02: HostRefreshStartTime= 7807 C03: HostRefreshStartTime= 7793 C03: HostRefreshStartTime= 7801 C04: HostRefreshStartTime= 7703 C04: HostRefreshStartTime= 7708 C05: HostRefreshStartTime= 7800 C05: HostRefreshStartTime= 7791 C06: HostRefreshStartTime= 7789 C06: HostRefreshStartTime= 7795 C07: HostRefreshStartTime= 7790 C07: HostRefreshStartTime= 7790 EnableHostRefresh Start Write Time diff[1]=149 ns EnableHostRefresh Start Write Time diff[1]=130 ns EnableHostRefresh Start Write Time diff[2]=298 ns EnableHostRefresh Start Write Time diff[2]=218 ns EnableHostRefresh Start Write Time diff[3]=165 ns EnableHostRefresh Start Write Time diff[3]=230 ns EnableHostRefresh Start Write Time diff[4]=258 ns EnableHostRefresh Start Write Time diff[4]=232 ns EnableHostRefresh Start Write Time diff[5]=266 ns EnableHostRefresh Start Write Time diff[5]=253 ns EnableHostRefresh Start Write Time diff[6]=261 ns EnableHostRefresh Start Write Time diff[6]=229 ns EnableHostRefresh Start Write Time diff[7]=272 ns EnableHostRefresh Start Write Time diff[7]=230 ns PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found [IIO](VMD) VMD init registered on endOfPei. WARNING: 00:46:04.0: Device 1077-8070 link width trained below capability WARNING: (RPLINKCAP 0x0F7A4084, RPLINKSTS 0x00003043) WARNING: (EPLINKCAP 0x0045F083, EPLINKSTS 0x00001043) PeiMemoryBaseAddress: 0x000000000E66E000. 18%: Memory Initialization - Complete ME UMA PostMem: SendDramInitDone (): InitStat = 0 ME UMA PostMem: BiosAction = 7 ME UMA PostMem: MeDramInitDone Complete. Checking for reset... Initialization is not allowed Platform Type = 10 Fail to process new found FV, FV may be corrupted! Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 TPM Measurement - Start TPM Measurement - Complete LocatePpi status = Success [SmbusErrataFix.c] Execute EfiSmbusSendByte (0xE2) mdatabyte = 4, Status = Device Error Install SgxInit Ppi : 0 Error: SgxRegistrationStatus report error code: 0x15 SGX disabled, exiting [IIO](TH) PCH Trace Hub not accessible [IPMI] mIpmiInstance->KcsTimeoutPeriod: 0x186A0 [IPMI] BMC Device ID: 0x13, firmware version: 2.60 UpdateMode:0 IPMI Dxe:Get BMC Device Id 21%: SMBIOS Table Initialization No ME Policy Protocol availableNo ME Policy Protocol availableUsbPortXhci Dxe driver:PlatformType=10 ConvertPages: failed to find range 94000000 - 97FFFFFF AllocateManagementDeviceBarSpace: SetMemorySpaceAttributes for Flash Device region failed! Status = 00000002 25%: USB Controller Initialization 28%: Chipset Root Ports Initialization 32%: HPE Memory Initialization HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr AE. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A0. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A2. ConvertPages: failed to find range 70000000 - 77BFFFFF HpTranslateTlsCipherList (715): Input / output data is null or input data size is invalid [OtaDxe.c] OtaDxeDriverEntry() { [OtaDxe.c] OtaDxeDriverEntry() -> Create OTA Event [OtaDxe.c] OtaDxeDriverEntry() -> OTA Event creation: Success [OtaDxe.c] OtaDxeDriverEntry() } Success [OtaShellCommands.c] OtaShellCommandsEntry() { [OtaShellCommands.c] OtaShellCommandsEntry() -> Init OTA Shell Commands Table [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaShell -> Success [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaConfig -> Success [OtaShellCommands.c] OtaShellCommandsEntry() } Success Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 ConvertPages: failed to find range F0000 - FFFFF ConvertPages: failed to find range 6F800000 - 6FFFFFFF ConvertPages: failed to find range 70000000 - 77BFFFFF ConvertPages: failed to find range 77C00000 - 7FFFFFFF ConvertPages: failed to find range 80000000 - 8FFFFFFF ConvertPages: failed to find range 90000000 - 93FFFFFF ConvertPages: failed to find range 94000000 - 97FFFFFF ConvertPages: failed to find range 98000000 - 99C0FFFF ConvertPages: failed to find range 99C10000 - A47FBFFF ConvertPages: failed to find range A4800000 - AE3FBFFF ConvertPages: failed to find range AE400000 - B7FFBFFF ConvertPages: failed to find range B8000000 - C1BFBFFF ConvertPages: failed to find range C1C00000 - CAFFBFFF ConvertPages: failed to find range CB800000 - D4FFBFFF ConvertPages: failed to find range D5000000 - DEBFBFFF ConvertPages: failed to find range DEC00000 - E87FBFFF ConvertPages: failed to find range E8800000 - F23FBFFF ConvertPages: failed to find range F2400000 - FB7FBFFF ConvertPages: failed to find range FD000000 - FDFFFFFF ConvertPages: failed to find range FE000000 - FE00FFFF ConvertPages: failed to find range FE010000 - FE7FFFFF ConvertPages: failed to find range FEC00000 - FEC00FFF ConvertPages: failed to find range FEC80000 - FED00FFF ConvertPages: failed to find range 200000000000 - 29FFFFFFFFFF 36%: System Security Initialization SMBIOS Package[0] - Processor[0] SMBIOS Package[1] - Processor[56] CPU[000]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 CPU[056]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 No PMems, Crystal Ridge Drvier is not going to be loaded. [IIO](TH) Trace Hub requested memory Size is 0. Not allocating memory. [IIO](TH) PCH Trace Hub not accessible. Disabled. [IIO](TH) ERROR Failed to configure PCH Trace Hub. Status= Not Ready ERROR: IioTraceHubInitialize failed. Status= Not Ready [IIO](SPK) IioSpkSocketInitialize: SocketId: 0 [IIO](SPK) IioSpkSocketInitialize: SocketId: 1 39%: iLO Embedded Health Initialization Run PPM in DXE 43%: ACPI Table Initialization TXT is disabled MeasurementTmeState() retrun error: Not Found MeasurementMktmeState() retrun error: Not Found Measurment MSR: MRTEATVT return error Not Found Measurment MSR: MRTECPBLT return error Not Found Measurment MSR: MRTEECUEBS return error Not Found Measurment MSR: MRTEECUEMS return error Not Found Measurement failed for one or more MSRs. retrun error: Not Found Warning: SGX is disabled on this system. [SGX] SgxDisabled_SgxLateInit: Success [SGX] SgxErrorCode = 0x0 Can not load NvDimmFwUpdateDriverEntryPoint : Type 1 NVDIMM support unavailable 46%: BIOS Configuration Initialization RbsuSetupDxeEntry, failed to initial product lines feature: Unsupported CheckDebugCertificateStatus: unpack error. 53%: Early PCI Initialization - Start PciRootBridgeEnumeratorPciDeviceTable: PCI-PCI Bridge found but not in PCI Device Table, Bus=0 PciRootBridgeEnumeratorPciDeviceTable: Continuing in ~8 sec. PchUplink programming error! Can not find the Uplink x16 port. [IE_HECI-0] Resetting HECI interface (CSR 80848408/80272709) 61%: Early PCI Initialization - Complete 71%: Switching console output to Primary Video. Please wait... :INIT - BIOS_RESET_CPL: Set CPL3 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL3 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** [SGX] SgxAfterPlatformLocksCallback entry BiosParamInfo TopologyInfo CpuSvn is 0 [SGX] UpdateRegistrationPackageInfo BEGIN [SGX] UpdateRegistrationPackageInfo END ExposeAllScenariosSgxRegistrationUefiVariables Enter Expose variable [SgxRegistrationConfiguration]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 RegistrationRequestType 0 Expose variable [SgxRegistrationServerRequest]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 1 Expose variable [SgxRegistrationPackageInfo]: SetVariable: Success ExposeToOsRuntime: 0 ReadOnlyOsRuntime: 0 Expose variable [SgxRegistrationStatus]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 Success to expose Registration Variables, exiting... [SGX] SgxAfterPlatformLocksCallback exit: success (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP HPE ProLiant DL360 Gen10 Plus System ROM Version: U46 v1.58 (01/13/2022) Serial Number: CZ22080FY9 Installed System Memory: 512 GB, Available System Memory: 512 GB 2 Processor(s) detected, 56 total cores enabled, Hyperthreading is enabled Proc 1: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz Proc 2: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz UPI Speed: 11.2 GT/s Workload Profile: Virtualization - Max Performance Power Regulator Mode: Static High Performance Advanced Memory Protection Mode: Fast Fault Tolerant Memory (ADDDC) RAS Mode: Firmware First Boot Mode: UEFI (Secure Boot) HPE Memory authenticated in all populated DIMM slots. ERROR: C80000002:V801000DD I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A5320 BuildDiskDriveTable: Cannot find more legal ports for SATA drive. Done! IsDevSmartArrayCtrl: AIP GetInformation for gEfiHpSmartArrayFeatures failed! Status = Unsupported HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) PopulateAndCreateDimmCurrentConfigRecords: Unable to retrieve size of InterleaveSets variable, Status = Not Found Embedded : iLO 5 embedded health Device - Repair Required Embedded : iLO 5 embedded health Device - Repair Required System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. ERROR: C80000002:V801000A6 I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. F1 pressed continue to boot in 19 seconds... T_TEST: Build ATSR SocketIndex=0. IIO_resource.valid=1. 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 T_TEST: Build ATSR SocketIndex=1. IIO_resource.valid=1.le or errors detected ReportDmar: Could not find RAC buffer or buffer size is 0! Status = Success HeciIeSetPowerRegulatorSetting: IEPS_CMD_SET_POWER_REGULATOR_REQ FAILURE(ResponseCode: 0x78) TPM Location configured (expected values: dTPM = 0x5 = 0x5 Value at TPM Base Address (0xFED40000) = 0xA1 HierarchyChangeAuth: Response Code error! 0x000009A2 Starting all devices for entering Boot Menu. Please wait...... BootMenuEntryCallback: Qid 0x801C to BootOption 0x14 RHEL CoreOS (Live) Use the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt. The selected entry will be started automatically in 0s. EFI stub: UEFI Secure Boot is enabled. Secure Start verification in progress. This may take a few seconds... Recommended Terminal Window Size = 100x31 ========================================= HPE ProLiant System BIOS U46 v1.58 (01/13/2022) (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP Early system initialization, please wait... iLO 5 IPv4: iLO 5 IPv6: iLO 5 IPv4: 10.8.247.46 iLO 5 IPv6: FE80::5EBA:2CFF:FE43:832A Fail to process new found FV, FV may be corrupted! ERROR: Internal fabric error detected!! PSF PID:0xBA, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0xBC, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF InstallHeciTransportPpis, start InstallHeciTransportPpis, end [HECI CONTROL PEI] HECI Transport found: 2 [HECI] [ME] (MeType is ME_TYPE_SPS) Initialization is allowed Initialization is not allowed Initialization is not allowed 2%: System Chipset Initialization Couldn't read Flash Security Override [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) Error: Update PEI FuSa (SAF) policy! Status: Not Found LtStatusRegister[0xFED30000] = 0x0000000000004092 LtExtendedStatusError[0xFED30008] = 0x0000000000000000 BootGuardBootStatus[0xFED300A0] = 0x9D54000080002000 BootGuardAcmError[0xFED30328] = 0x00000000C0008000 MSR_BOOT_GUARD_SACM_INFO[0x0000013A] = 0x0000000F0000007D Platform Type = 10 [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) MeUmaConfigureRequestedSegmentSize: Exiting (Status = Success) 4%: UPI Link Initialization - Start [IIO](UBA) [0.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p01] 0 | 1 | 1 | 0 | 0x00 | 0 [IIO](UBA) [0 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p05] 0 | 1 | 2 | 0 | 0x00 | 0 [IIO](UBA) [0 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.4] Bifurcation = 3 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p13] 0 | 1 | 255 | 0 | 0x00 | 0 [IIO](UBA) [0 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p15] 0 | 1 | 10 | 0 | 0x00 | 0 [IIO](UBA) [0 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p17] 0 | 1 | 13 | 1 | 0x00 | 0 [IIO](UBA) [0 p18] 0 | 1 | 14 | 1 | 0x00 | 0 [IIO](UBA) [0 p19] 0 | 1 | 15 | 1 | 0x00 | 0 [IIO](UBA) [0 p20] 0 | 1 | 16 | 1 | 0x00 | 0 [IIO](UBA) [1.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p01] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p05] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.4] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p13] 0 | 1 | 3 | 0 | 0x00 | 0 [IIO](UBA) [1 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p15] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p17] 0 | 1 | 29 | 1 | 0x00 | 0 [IIO](UBA) [1 p18] 0 | 1 | 30 | 1 | 0x00 | 0 [IIO](UBA) [1 p19] 0 | 1 | 31 | 1 | 0x00 | 0 [IIO](UBA) [1 p20] 0 | 1 | 32 | 1 | 0x00 | 0 BuildCpuTopologyInfoHob: Failed to Build Cpu Info Hob 5%: UPI Link Initialization - Complete [IIO](VMD) [0] VMD disabled for RPs init. PCH Detect: MMIO base on Socket 1, is 0, skipping! WARNING: Platform does not support uplink port! [IIO](VMD) [1] VMD disabled for RPs init. 7%: Early Processor Initialization PrevBootErrors: No Memory MCA Error Found PrevBootErrors - Valid MCA UC entries: 0 9%: Memory Initialization - Start C00: REFRESH_SYNC_TIME_PerCh= 7800 C00: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C00: HostRefreshStartTime= 7800 C00: HostRefreshStartTime= 7800 C01: HostRefreshStartTime= 7807 C01: HostRefreshStartTime= 7800 C02: HostRefreshStartTime= 7809 C02: HostRefreshStartTime= 7807 C03: HostRefreshStartTime= 7793 C03: HostRefreshStartTime= 7801 C04: HostRefreshStartTime= 7703 C04: HostRefreshStartTime= 7708 C05: HostRefreshStartTime= 7800 C05: HostRefreshStartTime= 7791 C06: HostRefreshStartTime= 7789 C06: HostRefreshStartTime= 7795 C07: HostRefreshStartTime= 7790 C07: HostRefreshStartTime= 7790 EnableHostRefresh Start Write Time diff[1]=122 ns EnableHostRefresh Start Write Time diff[1]=117 ns EnableHostRefresh Start Write Time diff[2]=320 ns EnableHostRefresh Start Write Time diff[2]=251 ns EnableHostRefresh Start Write Time diff[3]=152 ns EnableHostRefresh Start Write Time diff[3]=206 ns EnableHostRefresh Start Write Time diff[4]=255 ns EnableHostRefresh Start Write Time diff[4]=232 ns EnableHostRefresh Start Write Time diff[5]=267 ns EnableHostRefresh Start Write Time diff[5]=257 ns EnableHostRefresh Start Write Time diff[6]=255 ns EnableHostRefresh Start Write Time diff[6]=230 ns EnableHostRefresh Start Write Time diff[7]=271 ns EnableHostRefresh Start Write Time diff[7]=238 ns PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found [IIO](VMD) VMD init registered on endOfPei. WARNING: 00:46:04.0: Device 1077-8070 link width trained below capability WARNING: (RPLINKCAP 0x0F7A4084, RPLINKSTS 0x00003043) WARNING: (EPLINKCAP 0x0045F083, EPLINKSTS 0x00001043) PeiMemoryBaseAddress: 0x000000000E66E000. 18%: Memory Initialization - Complete ME UMA PostMem: SendDramInitDone (): InitStat = 0 ME UMA PostMem: BiosAction = 7 ME UMA PostMem: MeDramInitDone Complete. Checking for reset... Initialization is not allowed Platform Type = 10 Fail to process new found FV, FV may be corrupted! Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 TPM Measurement - Start TPM Measurement - Complete LocatePpi status = Success [SmbusErrataFix.c] Execute EfiSmbusSendByte (0xE2) mdatabyte = 4, Status = Device Error Install SgxInit Ppi : 0 Error: SgxRegistrationStatus report error code: 0x15 SGX disabled, exiting [IIO](TH) PCH Trace Hub not accessible [IPMI] mIpmiInstance->KcsTimeoutPeriod: 0x186A0 [IPMI] BMC Device ID: 0x13, firmware version: 2.60 UpdateMode:0 IPMI Dxe:Get BMC Device Id 21%: SMBIOS Table Initialization No ME Policy Protocol availableNo ME Policy Protocol availableUsbPortXhci Dxe driver:PlatformType=10 ConvertPages: failed to find range 94000000 - 97FFFFFF AllocateManagementDeviceBarSpace: SetMemorySpaceAttributes for Flash Device region failed! Status = 00000002 25%: USB Controller Initialization 28%: Chipset Root Ports Initialization 32%: HPE Memory Initialization HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr AE. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A0. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A2. ConvertPages: failed to find range 70000000 - 77BFFFFF HpTranslateTlsCipherList (715): Input / output data is null or input data size is invalid [OtaDxe.c] OtaDxeDriverEntry() { [OtaDxe.c] OtaDxeDriverEntry() -> Create OTA Event [OtaDxe.c] OtaDxeDriverEntry() -> OTA Event creation: Success [OtaDxe.c] OtaDxeDriverEntry() } Success [OtaShellCommands.c] OtaShellCommandsEntry() { [OtaShellCommands.c] OtaShellCommandsEntry() -> Init OTA Shell Commands Table [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaShell -> Success [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaConfig -> Success [OtaShellCommands.c] OtaShellCommandsEntry() } Success Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 ConvertPages: failed to find range F0000 - FFFFF ConvertPages: failed to find range 6F800000 - 6FFFFFFF ConvertPages: failed to find range 70000000 - 77BFFFFF ConvertPages: failed to find range 77C00000 - 7FFFFFFF ConvertPages: failed to find range 80000000 - 8FFFFFFF ConvertPages: failed to find range 90000000 - 93FFFFFF ConvertPages: failed to find range 94000000 - 97FFFFFF ConvertPages: failed to find range 98000000 - 99C0FFFF ConvertPages: failed to find range 99C10000 - A47FBFFF ConvertPages: failed to find range A4800000 - AE3FBFFF ConvertPages: failed to find range AE400000 - B7FFBFFF ConvertPages: failed to find range B8000000 - C1BFBFFF ConvertPages: failed to find range C1C00000 - CAFFBFFF ConvertPages: failed to find range CB800000 - D4FFBFFF ConvertPages: failed to find range D5000000 - DEBFBFFF ConvertPages: failed to find range DEC00000 - E87FBFFF ConvertPages: failed to find range E8800000 - F23FBFFF ConvertPages: failed to find range F2400000 - FB7FBFFF ConvertPages: failed to find range FD000000 - FDFFFFFF ConvertPages: failed to find range FE000000 - FE00FFFF ConvertPages: failed to find range FE010000 - FE7FFFFF ConvertPages: failed to find range FEC00000 - FEC00FFF ConvertPages: failed to find range FEC80000 - FED00FFF ConvertPages: failed to find range 200000000000 - 29FFFFFFFFFF 36%: System Security Initialization SMBIOS Package[0] - Processor[0] SMBIOS Package[1] - Processor[56] CPU[000]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 CPU[056]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 No PMems, Crystal Ridge Drvier is not going to be loaded. [IIO](TH) Trace Hub requested memory Size is 0. Not allocating memory. [IIO](TH) PCH Trace Hub not accessible. Disabled. [IIO](TH) ERROR Failed to configure PCH Trace Hub. Status= Not Ready ERROR: IioTraceHubInitialize failed. Status= Not Ready [IIO](SPK) IioSpkSocketInitialize: SocketId: 0 [IIO](SPK) IioSpkSocketInitialize: SocketId: 1 39%: iLO Embedded Health Initialization Run PPM in DXE 43%: ACPI Table Initialization TXT is disabled MeasurementTmeState() retrun error: Not Found MeasurementMktmeState() retrun error: Not Found Measurment MSR: MRTEATVT return error Not Found Measurment MSR: MRTECPBLT return error Not Found Measurment MSR: MRTEECUEBS return error Not Found Measurment MSR: MRTEECUEMS return error Not Found Measurement failed for one or more MSRs. retrun error: Not Found Warning: SGX is disabled on this system. [SGX] SgxDisabled_SgxLateInit: Success [SGX] SgxErrorCode = 0x0 Can not load NvDimmFwUpdateDriverEntryPoint : Type 1 NVDIMM support unavailable 46%: BIOS Configuration Initialization RbsuSetupDxeEntry, failed to initial product lines feature: Unsupported CheckDebugCertificateStatus: unpack error. 53%: Early PCI Initialization - Start PciRootBridgeEnumeratorPciDeviceTable: PCI-PCI Bridge found but not in PCI Device Table, Bus=0 PciRootBridgeEnumeratorPciDeviceTable: Continuing in ~8 sec. PchUplink programming error! Can not find the Uplink x16 port. [IE_HECI-0] Resetting HECI interface (CSR 80848408/80272709) 61%: Early PCI Initialization - Complete 71%: Switching console output to Primary Video. Please wait... :INIT - BIOS_RESET_CPL: Set CPL3 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL3 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** [SGX] SgxAfterPlatformLocksCallback entry BiosParamInfo TopologyInfo CpuSvn is 0 [SGX] UpdateRegistrationPackageInfo BEGIN [SGX] UpdateRegistrationPackageInfo END ExposeAllScenariosSgxRegistrationUefiVariables Enter Expose variable [SgxRegistrationConfiguration]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 RegistrationRequestType 0 Expose variable [SgxRegistrationServerRequest]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 1 Expose variable [SgxRegistrationPackageInfo]: SetVariable: Success ExposeToOsRuntime: 0 ReadOnlyOsRuntime: 0 Expose variable [SgxRegistrationStatus]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 Success to expose Registration Variables, exiting... [SGX] SgxAfterPlatformLocksCallback exit: success (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP HPE ProLiant DL360 Gen10 Plus System ROM Version: U46 v1.58 (01/13/2022) Serial Number: CZ22080FY9 Installed System Memory: 512 GB, Available System Memory: 512 GB 2 Processor(s) detected, 56 total cores enabled, Hyperthreading is enabled Proc 1: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz Proc 2: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz UPI Speed: 11.2 GT/s Workload Profile: Virtualization - Max Performance Power Regulator Mode: Static High Performance Advanced Memory Protection Mode: Fast Fault Tolerant Memory (ADDDC) RAS Mode: Firmware First Boot Mode: UEFI (Secure Boot) HPE Memory authenticated in all populated DIMM slots. ERROR: C80000002:V801000DD I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A5320 BuildDiskDriveTable: Cannot find more legal ports for SATA drive. Done! IsDevSmartArrayCtrl: AIP GetInformation for gEfiHpSmartArrayFeatures failed! Status = Unsupported HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) PopulateAndCreateDimmCurrentConfigRecords: Unable to retrieve size of InterleaveSets variable, Status = Not Found Embedded : iLO 5 embedded health Device - Repair Required Embedded : iLO 5 embedded health Device - Repair Required System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. ERROR: C80000002:V801000A6 I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. F1 pressed continue to boot in 19 seconds... T_TEST: Build ATSR SocketIndex=0. IIO_resource.valid=1. 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 T_TEST: Build ATSR SocketIndex=1. IIO_resource.valid=1.le or errors detected ReportDmar: Could not find RAC buffer or buffer size is 0! Status = Success HeciIeSetPowerRegulatorSetting: IEPS_CMD_SET_POWER_REGULATOR_REQ FAILURE(ResponseCode: 0x78) TPM Location configured (expected values: dTPM = 0x5 = 0x5 Value at TPM Base Address (0xFED40000) = 0xA1 HierarchyChangeAuth: Response Code error! 0x000009A2 Starting all devices for entering Boot Menu. Please wait..... BootMenuEntryCallback: Qid 0x801C to BootOption 0x14 RHEL CoreOS (Live) Use the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt. The selected entry will be started automatically in 0s. EFI stub: UEFI Secure Boot is enabled. Secure Start verification in progress. This may take a few seconds... Recommended Terminal Window Size = 100x31 ========================================= HPE ProLiant System BIOS U46 v1.58 (01/13/2022) (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP Early system initialization, please wait... iLO 5 IPv4: iLO 5 IPv6: iLO 5 IPv4: 10.8.247.46 iLO 5 IPv6: FE80::5EBA:2CFF:FE43:832A Fail to process new found FV, FV may be corrupted! ERROR: Internal fabric error detected!! PSF PID:0xBA, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0xBC, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF InstallHeciTransportPpis, start InstallHeciTransportPpis, end [HECI CONTROL PEI] HECI Transport found: 2 [HECI] [ME] (MeType is ME_TYPE_SPS) Initialization is allowed Initialization is not allowed Initialization is not allowed 2%: System Chipset Initialization Couldn't read Flash Security Override [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) Error: Update PEI FuSa (SAF) policy! Status: Not Found LtStatusRegister[0xFED30000] = 0x0000000000004092 LtExtendedStatusError[0xFED30008] = 0x0000000000000000 BootGuardBootStatus[0xFED300A0] = 0x9D54000080002000 BootGuardAcmError[0xFED30328] = 0x00000000C0008000 MSR_BOOT_GUARD_SACM_INFO[0x0000013A] = 0x0000000F0000007D Platform Type = 10 [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) MeUmaConfigureRequestedSegmentSize: Exiting (Status = Success) 4%: UPI Link Initialization - Start [IIO](UBA) [0.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p01] 0 | 1 | 1 | 0 | 0x00 | 0 [IIO](UBA) [0 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p05] 0 | 1 | 2 | 0 | 0x00 | 0 [IIO](UBA) [0 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.4] Bifurcation = 3 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p13] 0 | 1 | 255 | 0 | 0x00 | 0 [IIO](UBA) [0 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p15] 0 | 1 | 10 | 0 | 0x00 | 0 [IIO](UBA) [0 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p17] 0 | 1 | 13 | 1 | 0x00 | 0 [IIO](UBA) [0 p18] 0 | 1 | 14 | 1 | 0x00 | 0 [IIO](UBA) [0 p19] 0 | 1 | 15 | 1 | 0x00 | 0 [IIO](UBA) [0 p20] 0 | 1 | 16 | 1 | 0x00 | 0 [IIO](UBA) [1.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p01] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p05] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.4] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p13] 0 | 1 | 3 | 0 | 0x00 | 0 [IIO](UBA) [1 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p15] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p17] 0 | 1 | 29 | 1 | 0x00 | 0 [IIO](UBA) [1 p18] 0 | 1 | 30 | 1 | 0x00 | 0 [IIO](UBA) [1 p19] 0 | 1 | 31 | 1 | 0x00 | 0 [IIO](UBA) [1 p20] 0 | 1 | 32 | 1 | 0x00 | 0 BuildCpuTopologyInfoHob: Failed to Build Cpu Info Hob 5%: UPI Link Initialization - Complete [IIO](VMD) [0] VMD disabled for RPs init. PCH Detect: MMIO base on Socket 1, is 0, skipping! WARNING: Platform does not support uplink port! [IIO](VMD) [1] VMD disabled for RPs init. 7%: Early Processor Initialization PrevBootErrors: No Memory MCA Error Found PrevBootErrors - Valid MCA UC entries: 0 9%: Memory Initialization - Start C00: REFRESH_SYNC_TIME_PerCh= 7800 C00: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C00: HostRefreshStartTime= 7800 C00: HostRefreshStartTime= 7800 C01: HostRefreshStartTime= 7807 C01: HostRefreshStartTime= 7800 C02: HostRefreshStartTime= 7809 C02: HostRefreshStartTime= 7807 C03: HostRefreshStartTime= 7793 C03: HostRefreshStartTime= 7801 C04: HostRefreshStartTime= 7703 C04: HostRefreshStartTime= 7708 C05: HostRefreshStartTime= 7800 C05: HostRefreshStartTime= 7791 C06: HostRefreshStartTime= 7789 C06: HostRefreshStartTime= 7795 C07: HostRefreshStartTime= 7790 C07: HostRefreshStartTime= 7790 EnableHostRefresh Start Write Time diff[1]=120 ns EnableHostRefresh Start Write Time diff[1]=130 ns EnableHostRefresh Start Write Time diff[2]=322 ns EnableHostRefresh Start Write Time diff[2]=229 ns EnableHostRefresh Start Write Time diff[3]=153 ns EnableHostRefresh Start Write Time diff[3]=228 ns EnableHostRefresh Start Write Time diff[4]=254 ns EnableHostRefresh Start Write Time diff[4]=232 ns EnableHostRefresh Start Write Time diff[5]=266 ns EnableHostRefresh Start Write Time diff[5]=253 ns EnableHostRefresh Start Write Time diff[6]=260 ns EnableHostRefresh Start Write Time diff[6]=228 ns EnableHostRefresh Start Write Time diff[7]=270 ns EnableHostRefresh Start Write Time diff[7]=228 ns PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found [IIO](VMD) VMD init registered on endOfPei. WARNING: 00:46:04.0: Device 1077-8070 link width trained below capability WARNING: (RPLINKCAP 0x0F7A4084, RPLINKSTS 0x00003043) WARNING: (EPLINKCAP 0x0045F083, EPLINKSTS 0x00001043) PeiMemoryBaseAddress: 0x000000000E66E000. 18%: Memory Initialization - Complete ME UMA PostMem: SendDramInitDone (): InitStat = 0 ME UMA PostMem: BiosAction = 7 ME UMA PostMem: MeDramInitDone Complete. Checking for reset... Initialization is not allowed Platform Type = 10 Fail to process new found FV, FV may be corrupted! Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 TPM Measurement - Start TPM Measurement - Complete LocatePpi status = Success [SmbusErrataFix.c] Execute EfiSmbusSendByte (0xE2) mdatabyte = 4, Status = Device Error Install SgxInit Ppi : 0 Error: SgxRegistrationStatus report error code: 0x15 SGX disabled, exiting [IIO](TH) PCH Trace Hub not accessible [IPMI] mIpmiInstance->KcsTimeoutPeriod: 0x186A0 [IPMI] BMC Device ID: 0x13, firmware version: 2.60 UpdateMode:0 IPMI Dxe:Get BMC Device Id 21%: SMBIOS Table Initialization No ME Policy Protocol availableNo ME Policy Protocol availableUsbPortXhci Dxe driver:PlatformType=10 ConvertPages: failed to find range 94000000 - 97FFFFFF AllocateManagementDeviceBarSpace: SetMemorySpaceAttributes for Flash Device region failed! Status = 00000002 25%: USB Controller Initialization 28%: Chipset Root Ports Initialization 32%: HPE Memory Initialization HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr AE. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A0. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A2. ConvertPages: failed to find range 70000000 - 77BFFFFF HpTranslateTlsCipherList (715): Input / output data is null or input data size is invalid [OtaDxe.c] OtaDxeDriverEntry() { [OtaDxe.c] OtaDxeDriverEntry() -> Create OTA Event [OtaDxe.c] OtaDxeDriverEntry() -> OTA Event creation: Success [OtaDxe.c] OtaDxeDriverEntry() } Success [OtaShellCommands.c] OtaShellCommandsEntry() { [OtaShellCommands.c] OtaShellCommandsEntry() -> Init OTA Shell Commands Table [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaShell -> Success [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaConfig -> Success [OtaShellCommands.c] OtaShellCommandsEntry() } Success Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 ConvertPages: failed to find range F0000 - FFFFF ConvertPages: failed to find range 6F800000 - 6FFFFFFF ConvertPages: failed to find range 70000000 - 77BFFFFF ConvertPages: failed to find range 77C00000 - 7FFFFFFF ConvertPages: failed to find range 80000000 - 8FFFFFFF ConvertPages: failed to find range 90000000 - 93FFFFFF ConvertPages: failed to find range 94000000 - 97FFFFFF ConvertPages: failed to find range 98000000 - 99C0FFFF ConvertPages: failed to find range 99C10000 - A47FBFFF ConvertPages: failed to find range A4800000 - AE3FBFFF ConvertPages: failed to find range AE400000 - B7FFBFFF ConvertPages: failed to find range B8000000 - C1BFBFFF ConvertPages: failed to find range C1C00000 - CAFFBFFF ConvertPages: failed to find range CB800000 - D4FFBFFF ConvertPages: failed to find range D5000000 - DEBFBFFF ConvertPages: failed to find range DEC00000 - E87FBFFF ConvertPages: failed to find range E8800000 - F23FBFFF ConvertPages: failed to find range F2400000 - FB7FBFFF ConvertPages: failed to find range FD000000 - FDFFFFFF ConvertPages: failed to find range FE000000 - FE00FFFF ConvertPages: failed to find range FE010000 - FE7FFFFF ConvertPages: failed to find range FEC00000 - FEC00FFF ConvertPages: failed to find range FEC80000 - FED00FFF ConvertPages: failed to find range 200000000000 - 29FFFFFFFFFF 36%: System Security Initialization SMBIOS Package[0] - Processor[0] SMBIOS Package[1] - Processor[56] CPU[000]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 CPU[056]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 No PMems, Crystal Ridge Drvier is not going to be loaded. [IIO](TH) Trace Hub requested memory Size is 0. Not allocating memory. [IIO](TH) PCH Trace Hub not accessible. Disabled. [IIO](TH) ERROR Failed to configure PCH Trace Hub. Status= Not Ready ERROR: IioTraceHubInitialize failed. Status= Not Ready [IIO](SPK) IioSpkSocketInitialize: SocketId: 0 [IIO](SPK) IioSpkSocketInitialize: SocketId: 1 39%: iLO Embedded Health Initialization Run PPM in DXE 43%: ACPI Table Initialization TXT is disabled MeasurementTmeState() retrun error: Not Found MeasurementMktmeState() retrun error: Not Found Measurment MSR: MRTEATVT return error Not Found Measurment MSR: MRTECPBLT return error Not Found Measurment MSR: MRTEECUEBS return error Not Found Measurment MSR: MRTEECUEMS return error Not Found Measurement failed for one or more MSRs. retrun error: Not Found Warning: SGX is disabled on this system. [SGX] SgxDisabled_SgxLateInit: Success [SGX] SgxErrorCode = 0x0 Can not load NvDimmFwUpdateDriverEntryPoint : Type 1 NVDIMM support unavailable 46%: BIOS Configuration Initialization RbsuSetupDxeEntry, failed to initial product lines feature: Unsupported CheckDebugCertificateStatus: unpack error. 53%: Early PCI Initialization - Start PciRootBridgeEnumeratorPciDeviceTable: PCI-PCI Bridge found but not in PCI Device Table, Bus=0 PciRootBridgeEnumeratorPciDeviceTable: Continuing in ~8 sec. PchUplink programming error! Can not find the Uplink x16 port. [IE_HECI-0] Resetting HECI interface (CSR 80848408/80272709) 61%: Early PCI Initialization - Complete 71%: Switching console output to Primary Video. Please wait... :INIT - BIOS_RESET_CPL: Set CPL3 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL3 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** [SGX] SgxAfterPlatformLocksCallback entry BiosParamInfo TopologyInfo CpuSvn is 0 [SGX] UpdateRegistrationPackageInfo BEGIN [SGX] UpdateRegistrationPackageInfo END ExposeAllScenariosSgxRegistrationUefiVariables Enter Expose variable [SgxRegistrationConfiguration]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 RegistrationRequestType 0 Expose variable [SgxRegistrationServerRequest]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 1 Expose variable [SgxRegistrationPackageInfo]: SetVariable: Success ExposeToOsRuntime: 0 ReadOnlyOsRuntime: 0 Expose variable [SgxRegistrationStatus]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 Success to expose Registration Variables, exiting... [SGX] SgxAfterPlatformLocksCallback exit: success (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP HPE ProLiant DL360 Gen10 Plus System ROM Version: U46 v1.58 (01/13/2022) Serial Number: CZ22080FY9 Installed System Memory: 512 GB, Available System Memory: 512 GB 2 Processor(s) detected, 56 total cores enabled, Hyperthreading is enabled Proc 1: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz Proc 2: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz UPI Speed: 11.2 GT/s Workload Profile: Virtualization - Max Performance Power Regulator Mode: Static High Performance Advanced Memory Protection Mode: Fast Fault Tolerant Memory (ADDDC) RAS Mode: Firmware First Boot Mode: UEFI (Secure Boot) HPE Memory authenticated in all populated DIMM slots. ERROR: C80000002:V801000DD I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A5320 BuildDiskDriveTable: Cannot find more legal ports for SATA drive. Done! IsDevSmartArrayCtrl: AIP GetInformation for gEfiHpSmartArrayFeatures failed! Status = Unsupported HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) PopulateAndCreateDimmCurrentConfigRecords: Unable to retrieve size of InterleaveSets variable, Status = Not Found Embedded : iLO 5 embedded health Device - Repair Required Embedded : iLO 5 embedded health Device - Repair Required System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. ERROR: C80000002:V801000A6 I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. F1 pressed continue to boot in 16 seconds... T_TEST: Build ATSR SocketIndex=0. IIO_resource.valid=1. 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 T_TEST: Build ATSR SocketIndex=1. IIO_resource.valid=1.le or errors detected ReportDmar: Could not find RAC buffer or buffer size is 0! Status = Success HeciIeSetPowerRegulatorSetting: IEPS_CMD_SET_POWER_REGULATOR_REQ FAILURE(ResponseCode: 0x78) TPM Location configured (expected values: dTPM = 0x5 = 0x5 Value at TPM Base Address (0xFED40000) = 0xA1 HierarchyChangeAuth: Response Code error! 0x000009A2 Starting all devices for entering Boot Menu. Please wait...... BootMenuEntryCallback: Qid 0x801C to BootOption 0x14 RHEL CoreOS (Live) Use the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt. The selected entry will be started automatically in 0s. EFI stub: UEFI Secure Boot is enabled. Secure Start verification in progress. This may take a few seconds... Recommended Terminal Window Size = 100x31 ========================================= HPE ProLiant System BIOS U46 v1.58 (01/13/2022) (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP Early system initialization, please wait... iLO 5 IPv4: iLO 5 IPv6: iLO 5 IPv4: 10.8.247.46 iLO 5 IPv6: FE80::5EBA:2CFF:FE43:832A Fail to process new found FV, FV may be corrupted! ERROR: Internal fabric error detected!! PSF PID:0xBA, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0xBC, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF InstallHeciTransportPpis, start InstallHeciTransportPpis, end [HECI CONTROL PEI] HECI Transport found: 2 [HECI] [ME] (MeType is ME_TYPE_SPS) Initialization is allowed Initialization is not allowed Initialization is not allowed 2%: System Chipset Initialization Couldn't read Flash Security Override [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) Error: Update PEI FuSa (SAF) policy! Status: Not Found LtStatusRegister[0xFED30000] = 0x0000000000004092 LtExtendedStatusError[0xFED30008] = 0x0000000000000000 BootGuardBootStatus[0xFED300A0] = 0x9D54000080002000 BootGuardAcmError[0xFED30328] = 0x00000000C0008000 MSR_BOOT_GUARD_SACM_INFO[0x0000013A] = 0x0000000F0000007D Platform Type = 10 [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) MeUmaConfigureRequestedSegmentSize: Exiting (Status = Success) 4%: UPI Link Initialization - Start [IIO](UBA) [0.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p01] 0 | 1 | 1 | 0 | 0x00 | 0 [IIO](UBA) [0 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p05] 0 | 1 | 2 | 0 | 0x00 | 0 [IIO](UBA) [0 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.4] Bifurcation = 3 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p13] 0 | 1 | 255 | 0 | 0x00 | 0 [IIO](UBA) [0 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p15] 0 | 1 | 10 | 0 | 0x00 | 0 [IIO](UBA) [0 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p17] 0 | 1 | 13 | 1 | 0x00 | 0 [IIO](UBA) [0 p18] 0 | 1 | 14 | 1 | 0x00 | 0 [IIO](UBA) [0 p19] 0 | 1 | 15 | 1 | 0x00 | 0 [IIO](UBA) [0 p20] 0 | 1 | 16 | 1 | 0x00 | 0 [IIO](UBA) [1.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p01] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p05] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.4] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p13] 0 | 1 | 3 | 0 | 0x00 | 0 [IIO](UBA) [1 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p15] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p17] 0 | 1 | 29 | 1 | 0x00 | 0 [IIO](UBA) [1 p18] 0 | 1 | 30 | 1 | 0x00 | 0 [IIO](UBA) [1 p19] 0 | 1 | 31 | 1 | 0x00 | 0 [IIO](UBA) [1 p20] 0 | 1 | 32 | 1 | 0x00 | 0 BuildCpuTopologyInfoHob: Failed to Build Cpu Info Hob 5%: UPI Link Initialization - Complete [IIO](VMD) [0] VMD disabled for RPs init. PCH Detect: MMIO base on Socket 1, is 0, skipping! WARNING: Platform does not support uplink port! [IIO](VMD) [1] VMD disabled for RPs init. 7%: Early Processor Initialization PrevBootErrors: No Memory MCA Error Found PrevBootErrors - Valid MCA UC entries: 0 9%: Memory Initialization - Start C00: REFRESH_SYNC_TIME_PerCh= 7800 C00: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C00: HostRefreshStartTime= 7800 C00: HostRefreshStartTime= 7800 C01: HostRefreshStartTime= 7807 C01: HostRefreshStartTime= 7800 C02: HostRefreshStartTime= 7809 C02: HostRefreshStartTime= 7807 C03: HostRefreshStartTime= 7793 C03: HostRefreshStartTime= 7801 C04: HostRefreshStartTime= 7703 C04: HostRefreshStartTime= 7708 C05: HostRefreshStartTime= 7800 C05: HostRefreshStartTime= 7791 C06: HostRefreshStartTime= 7789 C06: HostRefreshStartTime= 7795 C07: HostRefreshStartTime= 7790 C07: HostRefreshStartTime= 7790 EnableHostRefresh Start Write Time diff[1]=130 ns EnableHostRefresh Start Write Time diff[1]=120 ns EnableHostRefresh Start Write Time diff[2]=310 ns EnableHostRefresh Start Write Time diff[2]=227 ns EnableHostRefresh Start Write Time diff[3]=160 ns EnableHostRefresh Start Write Time diff[3]=228 ns EnableHostRefresh Start Write Time diff[4]=256 ns EnableHostRefresh Start Write Time diff[4]=236 ns EnableHostRefresh Start Write Time diff[5]=272 ns EnableHostRefresh Start Write Time diff[5]=256 ns EnableHostRefresh Start Write Time diff[6]=258 ns EnableHostRefresh Start Write Time diff[6]=230 ns EnableHostRefresh Start Write Time diff[7]=272 ns EnableHostRefresh Start Write Time diff[7]=239 ns PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found [IIO](VMD) VMD init registered on endOfPei. WARNING: 00:46:04.0: Device 1077-8070 link width trained below capability WARNING: (RPLINKCAP 0x0F7A4084, RPLINKSTS 0x00003043) WARNING: (EPLINKCAP 0x0045F083, EPLINKSTS 0x00001043) PeiMemoryBaseAddress: 0x000000000E66E000. 18%: Memory Initialization - Complete ME UMA PostMem: SendDramInitDone (): InitStat = 0 ME UMA PostMem: BiosAction = 7 ME UMA PostMem: MeDramInitDone Complete. Checking for reset... Initialization is not allowed Platform Type = 10 Fail to process new found FV, FV may be corrupted! Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 TPM Measurement - Start TPM Measurement - Complete LocatePpi status = Success [SmbusErrataFix.c] Execute EfiSmbusSendByte (0xE2) mdatabyte = 4, Status = Device Error Install SgxInit Ppi : 0 Error: SgxRegistrationStatus report error code: 0x15 SGX disabled, exiting [IIO](TH) PCH Trace Hub not accessible [IPMI] mIpmiInstance->KcsTimeoutPeriod: 0x186A0 [IPMI] BMC Device ID: 0x13, firmware version: 2.60 UpdateMode:0 IPMI Dxe:Get BMC Device Id 21%: SMBIOS Table Initialization No ME Policy Protocol availableNo ME Policy Protocol availableUsbPortXhci Dxe driver:PlatformType=10 ConvertPages: failed to find range 94000000 - 97FFFFFF AllocateManagementDeviceBarSpace: SetMemorySpaceAttributes for Flash Device region failed! Status = 00000002 25%: USB Controller Initialization 28%: Chipset Root Ports Initialization 32%: HPE Memory Initialization HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr AE. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A0. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A2. ConvertPages: failed to find range 70000000 - 77BFFFFF HpTranslateTlsCipherList (715): Input / output data is null or input data size is invalid [OtaDxe.c] OtaDxeDriverEntry() { [OtaDxe.c] OtaDxeDriverEntry() -> Create OTA Event [OtaDxe.c] OtaDxeDriverEntry() -> OTA Event creation: Success [OtaDxe.c] OtaDxeDriverEntry() } Success [OtaShellCommands.c] OtaShellCommandsEntry() { [OtaShellCommands.c] OtaShellCommandsEntry() -> Init OTA Shell Commands Table [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaShell -> Success [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaConfig -> Success [OtaShellCommands.c] OtaShellCommandsEntry() } Success Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 ConvertPages: failed to find range F0000 - FFFFF ConvertPages: failed to find range 6F800000 - 6FFFFFFF ConvertPages: failed to find range 70000000 - 77BFFFFF ConvertPages: failed to find range 77C00000 - 7FFFFFFF ConvertPages: failed to find range 80000000 - 8FFFFFFF ConvertPages: failed to find range 90000000 - 93FFFFFF ConvertPages: failed to find range 94000000 - 97FFFFFF ConvertPages: failed to find range 98000000 - 99C0FFFF ConvertPages: failed to find range 99C10000 - A47FBFFF ConvertPages: failed to find range A4800000 - AE3FBFFF ConvertPages: failed to find range AE400000 - B7FFBFFF ConvertPages: failed to find range B8000000 - C1BFBFFF ConvertPages: failed to find range C1C00000 - CAFFBFFF ConvertPages: failed to find range CB800000 - D4FFBFFF ConvertPages: failed to find range D5000000 - DEBFBFFF ConvertPages: failed to find range DEC00000 - E87FBFFF ConvertPages: failed to find range E8800000 - F23FBFFF ConvertPages: failed to find range F2400000 - FB7FBFFF ConvertPages: failed to find range FD000000 - FDFFFFFF ConvertPages: failed to find range FE000000 - FE00FFFF ConvertPages: failed to find range FE010000 - FE7FFFFF ConvertPages: failed to find range FEC00000 - FEC00FFF ConvertPages: failed to find range FEC80000 - FED00FFF ConvertPages: failed to find range 200000000000 - 29FFFFFFFFFF 36%: System Security Initialization SMBIOS Package[0] - Processor[0] SMBIOS Package[1] - Processor[56] CPU[000]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 CPU[056]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 No PMems, Crystal Ridge Drvier is not going to be loaded. [IIO](TH) Trace Hub requested memory Size is 0. Not allocating memory. [IIO](TH) PCH Trace Hub not accessible. Disabled. [IIO](TH) ERROR Failed to configure PCH Trace Hub. Status= Not Ready ERROR: IioTraceHubInitialize failed. Status= Not Ready [IIO](SPK) IioSpkSocketInitialize: SocketId: 0 [IIO](SPK) IioSpkSocketInitialize: SocketId: 1 39%: iLO Embedded Health Initialization Run PPM in DXE 43%: ACPI Table Initialization TXT is disabled MeasurementTmeState() retrun error: Not Found MeasurementMktmeState() retrun error: Not Found Measurment MSR: MRTEATVT return error Not Found Measurment MSR: MRTECPBLT return error Not Found Measurment MSR: MRTEECUEBS return error Not Found Measurment MSR: MRTEECUEMS return error Not Found Measurement failed for one or more MSRs. retrun error: Not Found Warning: SGX is disabled on this system. [SGX] SgxDisabled_SgxLateInit: Success [SGX] SgxErrorCode = 0x0 Can not load NvDimmFwUpdateDriverEntryPoint : Type 1 NVDIMM support unavailable 46%: BIOS Configuration Initialization RbsuSetupDxeEntry, failed to initial product lines feature: Unsupported CheckDebugCertificateStatus: unpack error. 53%: Early PCI Initialization - Start PciRootBridgeEnumeratorPciDeviceTable: PCI-PCI Bridge found but not in PCI Device Table, Bus=0 PciRootBridgeEnumeratorPciDeviceTable: Continuing in ~8 sec. PchUplink programming error! Can not find the Uplink x16 port. [IE_HECI-0] Resetting HECI interface (CSR 80848408/80272709) 61%: Early PCI Initialization - Complete 71%: Switching console output to Primary Video. Please wait... :INIT - BIOS_RESET_CPL: Set CPL3 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL3 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** [SGX] SgxAfterPlatformLocksCallback entry BiosParamInfo TopologyInfo CpuSvn is 0 [SGX] UpdateRegistrationPackageInfo BEGIN [SGX] UpdateRegistrationPackageInfo END ExposeAllScenariosSgxRegistrationUefiVariables Enter Expose variable [SgxRegistrationConfiguration]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 RegistrationRequestType 0 Expose variable [SgxRegistrationServerRequest]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 1 Expose variable [SgxRegistrationPackageInfo]: SetVariable: Success ExposeToOsRuntime: 0 ReadOnlyOsRuntime: 0 Expose variable [SgxRegistrationStatus]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 Success to expose Registration Variables, exiting... [SGX] SgxAfterPlatformLocksCallback exit: success (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP HPE ProLiant DL360 Gen10 Plus System ROM Version: U46 v1.58 (01/13/2022) Serial Number: CZ22080FY9 Installed System Memory: 512 GB, Available System Memory: 512 GB 2 Processor(s) detected, 56 total cores enabled, Hyperthreading is enabled Proc 1: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz Proc 2: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz UPI Speed: 11.2 GT/s Workload Profile: Virtualization - Max Performance Power Regulator Mode: Static High Performance Advanced Memory Protection Mode: Fast Fault Tolerant Memory (ADDDC) RAS Mode: Firmware First Boot Mode: UEFI (Secure Boot) HPE Memory authenticated in all populated DIMM slots. ERROR: C80000002:V801000DD I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A5320 BuildDiskDriveTable: Cannot find more legal ports for SATA drive. Done! IsDevSmartArrayCtrl: AIP GetInformation for gEfiHpSmartArrayFeatures failed! Status = Unsupported HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) PopulateAndCreateDimmCurrentConfigRecords: Unable to retrieve size of InterleaveSets variable, Status = Not Found Embedded : iLO 5 embedded health Device - Repair Required Embedded : iLO 5 embedded health Device - Repair Required System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. ERROR: C80000002:V801000A6 I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. F1 pressed continue to boot in 19 seconds... T_TEST: Build ATSR SocketIndex=0. IIO_resource.valid=1. 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 T_TEST: Build ATSR SocketIndex=1. IIO_resource.valid=1.le or errors detected ReportDmar: Could not find RAC buffer or buffer size is 0! Status = Success HeciIeSetPowerRegulatorSetting: IEPS_CMD_SET_POWER_REGULATOR_REQ FAILURE(ResponseCode: 0x78) TPM Location configured (expected values: dTPM = 0x5 = 0x5 Value at TPM Base Address (0xFED40000) = 0xA1 HierarchyChangeAuth: Response Code error! 0x000009A2 Starting all devices for entering Boot Menu. Please wait...... BootMenuEntryCallback: Qid 0x801C to BootOption 0x14 RHEL CoreOS (Live) Use the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt. EFI stub: UEFI Secure Boot is enabled. Secure Start verification in progress. This may take a few seconds... Recommended Terminal Window Size = 100x31 ========================================= HPE ProLiant System BIOS U46 v1.58 (01/13/2022) (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP Early system initialization, please wait... iLO 5 IPv4: iLO 5 IPv6: iLO 5 IPv4: 10.8.247.46 iLO 5 IPv6: FE80::5EBA:2CFF:FE43:832A Fail to process new found FV, FV may be corrupted! ERROR: Internal fabric error detected!! PSF PID:0xBA, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0xBC, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF InstallHeciTransportPpis, start InstallHeciTransportPpis, end [HECI CONTROL PEI] HECI Transport found: 2 [HECI] [ME] (MeType is ME_TYPE_SPS) Initialization is allowed Initialization is not allowed Initialization is not allowed 2%: System Chipset Initialization Couldn't read Flash Security Override [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) Error: Update PEI FuSa (SAF) policy! Status: Not Found LtStatusRegister[0xFED30000] = 0x0000000000004092 LtExtendedStatusError[0xFED30008] = 0x0000000000000000 BootGuardBootStatus[0xFED300A0] = 0x9D54000080002000 BootGuardAcmError[0xFED30328] = 0x00000000C0008000 MSR_BOOT_GUARD_SACM_INFO[0x0000013A] = 0x0000000F0000007D Platform Type = 10 [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) MeUmaConfigureRequestedSegmentSize: Exiting (Status = Success) 4%: UPI Link Initialization - Start [IIO](UBA) [0.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p01] 0 | 1 | 1 | 0 | 0x00 | 0 [IIO](UBA) [0 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p05] 0 | 1 | 2 | 0 | 0x00 | 0 [IIO](UBA) [0 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.4] Bifurcation = 3 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p13] 0 | 1 | 255 | 0 | 0x00 | 0 [IIO](UBA) [0 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p15] 0 | 1 | 10 | 0 | 0x00 | 0 [IIO](UBA) [0 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p17] 0 | 1 | 13 | 1 | 0x00 | 0 [IIO](UBA) [0 p18] 0 | 1 | 14 | 1 | 0x00 | 0 [IIO](UBA) [0 p19] 0 | 1 | 15 | 1 | 0x00 | 0 [IIO](UBA) [0 p20] 0 | 1 | 16 | 1 | 0x00 | 0 [IIO](UBA) [1.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p01] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p05] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.4] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p13] 0 | 1 | 3 | 0 | 0x00 | 0 [IIO](UBA) [1 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p15] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p17] 0 | 1 | 29 | 1 | 0x00 | 0 [IIO](UBA) [1 p18] 0 | 1 | 30 | 1 | 0x00 | 0 [IIO](UBA) [1 p19] 0 | 1 | 31 | 1 | 0x00 | 0 [IIO](UBA) [1 p20] 0 | 1 | 32 | 1 | 0x00 | 0 BuildCpuTopologyInfoHob: Failed to Build Cpu Info Hob 5%: UPI Link Initialization - Complete [IIO](VMD) [0] VMD disabled for RPs init. PCH Detect: MMIO base on Socket 1, is 0, skipping! WARNING: Platform does not support uplink port! [IIO](VMD) [1] VMD disabled for RPs init. 7%: Early Processor Initialization PrevBootErrors: No Memory MCA Error Found PrevBootErrors - Valid MCA UC entries: 0 9%: Memory Initialization - Start C00: REFRESH_SYNC_TIME_PerCh= 7800 C00: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C00: HostRefreshStartTime= 7800 C00: HostRefreshStartTime= 7800 C01: HostRefreshStartTime= 7807 C01: HostRefreshStartTime= 7800 C02: HostRefreshStartTime= 7809 C02: HostRefreshStartTime= 7807 C03: HostRefreshStartTime= 7793 C03: HostRefreshStartTime= 7801 C04: HostRefreshStartTime= 7703 C04: HostRefreshStartTime= 7708 C05: HostRefreshStartTime= 7800 C05: HostRefreshStartTime= 7791 C06: HostRefreshStartTime= 7789 C06: HostRefreshStartTime= 7795 C07: HostRefreshStartTime= 7790 C07: HostRefreshStartTime= 7790 EnableHostRefresh Start Write Time diff[1]=118 ns EnableHostRefresh Start Write Time diff[1]=117 ns EnableHostRefresh Start Write Time diff[2]=313 ns EnableHostRefresh Start Write Time diff[2]=253 ns EnableHostRefresh Start Write Time diff[3]=167 ns EnableHostRefresh Start Write Time diff[3]=203 ns EnableHostRefresh Start Write Time diff[4]=258 ns EnableHostRefresh Start Write Time diff[4]=233 ns EnableHostRefresh Start Write Time diff[5]=267 ns EnableHostRefresh Start Write Time diff[5]=257 ns EnableHostRefresh Start Write Time diff[6]=258 ns EnableHostRefresh Start Write Time diff[6]=229 ns EnableHostRefresh Start Write Time diff[7]=274 ns EnableHostRefresh Start Write Time diff[7]=236 ns PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found [IIO](VMD) VMD init registered on endOfPei. WARNING: 00:46:04.0: Device 1077-8070 link width trained below capability WARNING: (RPLINKCAP 0x0F7A4084, RPLINKSTS 0x00003043) WARNING: (EPLINKCAP 0x0045F083, EPLINKSTS 0x00001043) PeiMemoryBaseAddress: 0x000000000E66E000. 18%: Memory Initialization - Complete ME UMA PostMem: SendDramInitDone (): InitStat = 0 ME UMA PostMem: BiosAction = 7 ME UMA PostMem: MeDramInitDone Complete. Checking for reset... Initialization is not allowed Platform Type = 10 Fail to process new found FV, FV may be corrupted! Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 TPM Measurement - Start TPM Measurement - Complete LocatePpi status = Success [SmbusErrataFix.c] Execute EfiSmbusSendByte (0xE2) mdatabyte = 4, Status = Device Error Install SgxInit Ppi : 0 Error: SgxRegistrationStatus report error code: 0x15 SGX disabled, exiting [IIO](TH) PCH Trace Hub not accessible [IPMI] mIpmiInstance->KcsTimeoutPeriod: 0x186A0 [IPMI] BMC Device ID: 0x13, firmware version: 2.60 UpdateMode:0 IPMI Dxe:Get BMC Device Id 21%: SMBIOS Table Initialization No ME Policy Protocol availableNo ME Policy Protocol availableUsbPortXhci Dxe driver:PlatformType=10 ConvertPages: failed to find range 94000000 - 97FFFFFF AllocateManagementDeviceBarSpace: SetMemorySpaceAttributes for Flash Device region failed! Status = 00000002 25%: USB Controller Initialization 28%: Chipset Root Ports Initialization 32%: HPE Memory Initialization HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr AE. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A0. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A2. ConvertPages: failed to find range 70000000 - 77BFFFFF HpTranslateTlsCipherList (715): Input / output data is null or input data size is invalid [OtaDxe.c] OtaDxeDriverEntry() { [OtaDxe.c] OtaDxeDriverEntry() -> Create OTA Event [OtaDxe.c] OtaDxeDriverEntry() -> OTA Event creation: Success [OtaDxe.c] OtaDxeDriverEntry() } Success [OtaShellCommands.c] OtaShellCommandsEntry() { [OtaShellCommands.c] OtaShellCommandsEntry() -> Init OTA Shell Commands Table [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaShell -> Success [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaConfig -> Success [OtaShellCommands.c] OtaShellCommandsEntry() } Success Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 ConvertPages: failed to find range F0000 - FFFFF ConvertPages: failed to find range 6F800000 - 6FFFFFFF ConvertPages: failed to find range 70000000 - 77BFFFFF ConvertPages: failed to find range 77C00000 - 7FFFFFFF ConvertPages: failed to find range 80000000 - 8FFFFFFF ConvertPages: failed to find range 90000000 - 93FFFFFF ConvertPages: failed to find range 94000000 - 97FFFFFF ConvertPages: failed to find range 98000000 - 99C0FFFF ConvertPages: failed to find range 99C10000 - A47FBFFF ConvertPages: failed to find range A4800000 - AE3FBFFF ConvertPages: failed to find range AE400000 - B7FFBFFF ConvertPages: failed to find range B8000000 - C1BFBFFF ConvertPages: failed to find range C1C00000 - CAFFBFFF ConvertPages: failed to find range CB800000 - D4FFBFFF ConvertPages: failed to find range D5000000 - DEBFBFFF ConvertPages: failed to find range DEC00000 - E87FBFFF ConvertPages: failed to find range E8800000 - F23FBFFF ConvertPages: failed to find range F2400000 - FB7FBFFF ConvertPages: failed to find range FD000000 - FDFFFFFF ConvertPages: failed to find range FE000000 - FE00FFFF ConvertPages: failed to find range FE010000 - FE7FFFFF ConvertPages: failed to find range FEC00000 - FEC00FFF ConvertPages: failed to find range FEC80000 - FED00FFF ConvertPages: failed to find range 200000000000 - 29FFFFFFFFFF 36%: System Security Initialization SMBIOS Package[0] - Processor[0] SMBIOS Package[1] - Processor[56] CPU[000]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 CPU[056]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 No PMems, Crystal Ridge Drvier is not going to be loaded. [IIO](TH) Trace Hub requested memory Size is 0. Not allocating memory. [IIO](TH) PCH Trace Hub not accessible. Disabled. [IIO](TH) ERROR Failed to configure PCH Trace Hub. Status= Not Ready ERROR: IioTraceHubInitialize failed. Status= Not Ready [IIO](SPK) IioSpkSocketInitialize: SocketId: 0 [IIO](SPK) IioSpkSocketInitialize: SocketId: 1 39%: iLO Embedded Health Initialization Run PPM in DXE 43%: ACPI Table Initialization TXT is disabled MeasurementTmeState() retrun error: Not Found MeasurementMktmeState() retrun error: Not Found Measurment MSR: MRTEATVT return error Not Found Measurment MSR: MRTECPBLT return error Not Found Measurment MSR: MRTEECUEBS return error Not Found Measurment MSR: MRTEECUEMS return error Not Found Measurement failed for one or more MSRs. retrun error: Not Found Warning: SGX is disabled on this system. [SGX] SgxDisabled_SgxLateInit: Success [SGX] SgxErrorCode = 0x0 Can not load NvDimmFwUpdateDriverEntryPoint : Type 1 NVDIMM support unavailable 46%: BIOS Configuration Initialization RbsuSetupDxeEntry, failed to initial product lines feature: Unsupported CheckDebugCertificateStatus: unpack error. 53%: Early PCI Initialization - Start PciRootBridgeEnumeratorPciDeviceTable: PCI-PCI Bridge found but not in PCI Device Table, Bus=0 PciRootBridgeEnumeratorPciDeviceTable: Continuing in ~8 sec. PchUplink programming error! Can not find the Uplink x16 port. [IE_HECI-0] Resetting HECI interface (CSR 80848408/80272709) 61%: Early PCI Initialization - Complete 71%: Switching console output to Primary Video. Please wait... :INIT - BIOS_RESET_CPL: Set CPL3 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL3 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** [SGX] SgxAfterPlatformLocksCallback entry BiosParamInfo TopologyInfo CpuSvn is 0 [SGX] UpdateRegistrationPackageInfo BEGIN [SGX] UpdateRegistrationPackageInfo END ExposeAllScenariosSgxRegistrationUefiVariables Enter Expose variable [SgxRegistrationConfiguration]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 RegistrationRequestType 0 Expose variable [SgxRegistrationServerRequest]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 1 Expose variable [SgxRegistrationPackageInfo]: SetVariable: Success ExposeToOsRuntime: 0 ReadOnlyOsRuntime: 0 Expose variable [SgxRegistrationStatus]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 Success to expose Registration Variables, exiting... [SGX] SgxAfterPlatformLocksCallback exit: success (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP HPE ProLiant DL360 Gen10 Plus System ROM Version: U46 v1.58 (01/13/2022) Serial Number: CZ22080FY9 Installed System Memory: 512 GB, Available System Memory: 512 GB 2 Processor(s) detected, 56 total cores enabled, Hyperthreading is enabled Proc 1: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz Proc 2: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz UPI Speed: 11.2 GT/s Workload Profile: Virtualization - Max Performance Power Regulator Mode: Static High Performance Advanced Memory Protection Mode: Fast Fault Tolerant Memory (ADDDC) RAS Mode: Firmware First Boot Mode: UEFI (Secure Boot) HPE Memory authenticated in all populated DIMM slots. ERROR: C80000002:V801000DD I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A5320 BuildDiskDriveTable: Cannot find more legal ports for SATA drive. Done! IsDevSmartArrayCtrl: AIP GetInformation for gEfiHpSmartArrayFeatures failed! Status = Unsupported HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) PopulateAndCreateDimmCurrentConfigRecords: Unable to retrieve size of InterleaveSets variable, Status = Not Found Embedded : iLO 5 embedded health Device - Repair Required Embedded : iLO 5 embedded health Device - Repair Required System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. ERROR: C80000002:V801000A6 I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. F1 pressed continue to boot in 19 seconds... T_TEST: Build ATSR SocketIndex=0. IIO_resource.valid=1. 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 T_TEST: Build ATSR SocketIndex=1. IIO_resource.valid=1.le or errors detected ReportDmar: Could not find RAC buffer or buffer size is 0! Status = Success HeciIeSetPowerRegulatorSetting: IEPS_CMD_SET_POWER_REGULATOR_REQ FAILURE(ResponseCode: 0x78) TPM Location configured (expected values: dTPM = 0x5 = 0x5 Value at TPM Base Address (0xFED40000) = 0xA1 HierarchyChangeAuth: Response Code error! 0x000009A2 Starting all devices for entering Boot Menu. Please wait...... BootMenuEntryCallback: Qid 0x801C to BootOption 0x14 RHEL CoreOS (Live) Use the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt. EFI stub: UEFI Secure Boot is enabled. Secure Start verification in progress. This may take a few seconds... Recommended Terminal Window Size = 100x31 ========================================= HPE ProLiant System BIOS U46 v1.58 (01/13/2022) (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP Early system initialization, please wait... iLO 5 IPv4: iLO 5 IPv6: iLO 5 IPv4: 10.8.247.46 iLO 5 IPv6: FE80::5EBA:2CFF:FE43:832A Fail to process new found FV, FV may be corrupted! ERROR: Internal fabric error detected!! PSF PID:0xBA, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0xBC, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF InstallHeciTransportPpis, start InstallHeciTransportPpis, end [HECI CONTROL PEI] HECI Transport found: 2 [HECI] [ME] (MeType is ME_TYPE_SPS) Initialization is allowed Initialization is not allowed Initialization is not allowed 2%: System Chipset Initialization Couldn't read Flash Security Override [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) Error: Update PEI FuSa (SAF) policy! Status: Not Found LtStatusRegister[0xFED30000] = 0x0000000000004092 LtExtendedStatusError[0xFED30008] = 0x0000000000000000 BootGuardBootStatus[0xFED300A0] = 0x9D54000080002000 BootGuardAcmError[0xFED30328] = 0x00000000C0008000 MSR_BOOT_GUARD_SACM_INFO[0x0000013A] = 0x0000000F0000007D Platform Type = 10 [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) MeUmaConfigureRequestedSegmentSize: Exiting (Status = Success) 4%: UPI Link Initialization - Start [IIO](UBA) [0.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p01] 0 | 1 | 1 | 0 | 0x00 | 0 [IIO](UBA) [0 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p05] 0 | 1 | 2 | 0 | 0x00 | 0 [IIO](UBA) [0 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.4] Bifurcation = 3 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p13] 0 | 1 | 255 | 0 | 0x00 | 0 [IIO](UBA) [0 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p15] 0 | 1 | 10 | 0 | 0x00 | 0 [IIO](UBA) [0 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p17] 0 | 1 | 13 | 1 | 0x00 | 0 [IIO](UBA) [0 p18] 0 | 1 | 14 | 1 | 0x00 | 0 [IIO](UBA) [0 p19] 0 | 1 | 15 | 1 | 0x00 | 0 [IIO](UBA) [0 p20] 0 | 1 | 16 | 1 | 0x00 | 0 [IIO](UBA) [1.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p01] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p05] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.4] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p13] 0 | 1 | 3 | 0 | 0x00 | 0 [IIO](UBA) [1 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p15] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p17] 0 | 1 | 29 | 1 | 0x00 | 0 [IIO](UBA) [1 p18] 0 | 1 | 30 | 1 | 0x00 | 0 [IIO](UBA) [1 p19] 0 | 1 | 31 | 1 | 0x00 | 0 [IIO](UBA) [1 p20] 0 | 1 | 32 | 1 | 0x00 | 0 BuildCpuTopologyInfoHob: Failed to Build Cpu Info Hob 5%: UPI Link Initialization - Complete [IIO](VMD) [0] VMD disabled for RPs init. PCH Detect: MMIO base on Socket 1, is 0, skipping! WARNING: Platform does not support uplink port! [IIO](VMD) [1] VMD disabled for RPs init. 7%: Early Processor Initialization PrevBootErrors: No Memory MCA Error Found PrevBootErrors - Valid MCA UC entries: 0 9%: Memory Initialization - Start C00: REFRESH_SYNC_TIME_PerCh= 7800 C00: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C00: HostRefreshStartTime= 7800 C00: HostRefreshStartTime= 7800 C01: HostRefreshStartTime= 7807 C01: HostRefreshStartTime= 7800 C02: HostRefreshStartTime= 7809 C02: HostRefreshStartTime= 7807 C03: HostRefreshStartTime= 7793 C03: HostRefreshStartTime= 7801 C04: HostRefreshStartTime= 7703 C04: HostRefreshStartTime= 7708 C05: HostRefreshStartTime= 7800 C05: HostRefreshStartTime= 7791 C06: HostRefreshStartTime= 7789 C06: HostRefreshStartTime= 7795 C07: HostRefreshStartTime= 7790 C07: HostRefreshStartTime= 7790 EnableHostRefresh Start Write Time diff[1]=134 ns EnableHostRefresh Start Write Time diff[1]=117 ns EnableHostRefresh Start Write Time diff[2]=302 ns EnableHostRefresh Start Write Time diff[2]=255 ns EnableHostRefresh Start Write Time diff[3]=165 ns EnableHostRefresh Start Write Time diff[3]=203 ns EnableHostRefresh Start Write Time diff[4]=258 ns EnableHostRefresh Start Write Time diff[4]=236 ns EnableHostRefresh Start Write Time diff[5]=271 ns EnableHostRefresh Start Write Time diff[5]=256 ns EnableHostRefresh Start Write Time diff[6]=260 ns EnableHostRefresh Start Write Time diff[6]=228 ns EnableHostRefresh Start Write Time diff[7]=274 ns EnableHostRefresh Start Write Time diff[7]=230 ns PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found [IIO](VMD) VMD init registered on endOfPei. WARNING: 00:46:04.0: Device 1077-8070 link width trained below capability WARNING: (RPLINKCAP 0x0F7A4084, RPLINKSTS 0x00003043) WARNING: (EPLINKCAP 0x0045F083, EPLINKSTS 0x00001043) PeiMemoryBaseAddress: 0x000000000E66E000. 18%: Memory Initialization - Complete ME UMA PostMem: SendDramInitDone (): InitStat = 0 ME UMA PostMem: BiosAction = 7 ME UMA PostMem: MeDramInitDone Complete. Checking for reset... Initialization is not allowed Platform Type = 10 Fail to process new found FV, FV may be corrupted! Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 TPM Measurement - Start TPM Measurement - Complete LocatePpi status = Success [SmbusErrataFix.c] Execute EfiSmbusSendByte (0xE2) mdatabyte = 4, Status = Device Error Install SgxInit Ppi : 0 Error: SgxRegistrationStatus report error code: 0x15 SGX disabled, exiting [IIO](TH) PCH Trace Hub not accessible [IPMI] mIpmiInstance->KcsTimeoutPeriod: 0x186A0 [IPMI] BMC Device ID: 0x13, firmware version: 2.60 UpdateMode:0 IPMI Dxe:Get BMC Device Id 21%: SMBIOS Table Initialization No ME Policy Protocol availableNo ME Policy Protocol availableUsbPortXhci Dxe driver:PlatformType=10 ConvertPages: failed to find range 94000000 - 97FFFFFF AllocateManagementDeviceBarSpace: SetMemorySpaceAttributes for Flash Device region failed! Status = 00000002 25%: USB Controller Initialization 28%: Chipset Root Ports Initialization 32%: HPE Memory Initialization HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr AE. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A0. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A2. ConvertPages: failed to find range 70000000 - 77BFFFFF HpTranslateTlsCipherList (715): Input / output data is null or input data size is invalid [OtaDxe.c] OtaDxeDriverEntry() { [OtaDxe.c] OtaDxeDriverEntry() -> Create OTA Event [OtaDxe.c] OtaDxeDriverEntry() -> OTA Event creation: Success [OtaDxe.c] OtaDxeDriverEntry() } Success [OtaShellCommands.c] OtaShellCommandsEntry() { [OtaShellCommands.c] OtaShellCommandsEntry() -> Init OTA Shell Commands Table [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaShell -> Success [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaConfig -> Success [OtaShellCommands.c] OtaShellCommandsEntry() } Success Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 ConvertPages: failed to find range F0000 - FFFFF ConvertPages: failed to find range 6F800000 - 6FFFFFFF ConvertPages: failed to find range 70000000 - 77BFFFFF ConvertPages: failed to find range 77C00000 - 7FFFFFFF ConvertPages: failed to find range 80000000 - 8FFFFFFF ConvertPages: failed to find range 90000000 - 93FFFFFF ConvertPages: failed to find range 94000000 - 97FFFFFF ConvertPages: failed to find range 98000000 - 99C0FFFF ConvertPages: failed to find range 99C10000 - A47FBFFF ConvertPages: failed to find range A4800000 - AE3FBFFF ConvertPages: failed to find range AE400000 - B7FFBFFF ConvertPages: failed to find range B8000000 - C1BFBFFF ConvertPages: failed to find range C1C00000 - CAFFBFFF ConvertPages: failed to find range CB800000 - D4FFBFFF ConvertPages: failed to find range D5000000 - DEBFBFFF ConvertPages: failed to find range DEC00000 - E87FBFFF ConvertPages: failed to find range E8800000 - F23FBFFF ConvertPages: failed to find range F2400000 - FB7FBFFF ConvertPages: failed to find range FD000000 - FDFFFFFF ConvertPages: failed to find range FE000000 - FE00FFFF ConvertPages: failed to find range FE010000 - FE7FFFFF ConvertPages: failed to find range FEC00000 - FEC00FFF ConvertPages: failed to find range FEC80000 - FED00FFF ConvertPages: failed to find range 200000000000 - 29FFFFFFFFFF 36%: System Security Initialization SMBIOS Package[0] - Processor[0] SMBIOS Package[1] - Processor[56] CPU[000]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 CPU[056]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 No PMems, Crystal Ridge Drvier is not going to be loaded. [IIO](TH) Trace Hub requested memory Size is 0. Not allocating memory. [IIO](TH) PCH Trace Hub not accessible. Disabled. [IIO](TH) ERROR Failed to configure PCH Trace Hub. Status= Not Ready ERROR: IioTraceHubInitialize failed. Status= Not Ready [IIO](SPK) IioSpkSocketInitialize: SocketId: 0 [IIO](SPK) IioSpkSocketInitialize: SocketId: 1 39%: iLO Embedded Health Initialization Run PPM in DXE 43%: ACPI Table Initialization TXT is disabled MeasurementTmeState() retrun error: Not Found MeasurementMktmeState() retrun error: Not Found Measurment MSR: MRTEATVT return error Not Found Measurment MSR: MRTECPBLT return error Not Found Measurment MSR: MRTEECUEBS return error Not Found Measurment MSR: MRTEECUEMS return error Not Found Measurement failed for one or more MSRs. retrun error: Not Found Warning: SGX is disabled on this system. [SGX] SgxDisabled_SgxLateInit: Success [SGX] SgxErrorCode = 0x0 Can not load NvDimmFwUpdateDriverEntryPoint : Type 1 NVDIMM support unavailable 46%: BIOS Configuration Initialization RbsuSetupDxeEntry, failed to initial product lines feature: Unsupported CheckDebugCertificateStatus: unpack error. 53%: Early PCI Initialization - Start PciRootBridgeEnumeratorPciDeviceTable: PCI-PCI Bridge found but not in PCI Device Table, Bus=0 PciRootBridgeEnumeratorPciDeviceTable: Continuing in ~8 sec. PchUplink programming error! Can not find the Uplink x16 port. [IE_HECI-0] Resetting HECI interface (CSR 80848408/80272709) 61%: Early PCI Initialization - Complete 71%: Switching console output to Primary Video. Please wait... :INIT - BIOS_RESET_CPL: Set CPL3 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL3 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** [SGX] SgxAfterPlatformLocksCallback entry BiosParamInfo TopologyInfo CpuSvn is 0 [SGX] UpdateRegistrationPackageInfo BEGIN [SGX] UpdateRegistrationPackageInfo END ExposeAllScenariosSgxRegistrationUefiVariables Enter Expose variable [SgxRegistrationConfiguration]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 RegistrationRequestType 0 Expose variable [SgxRegistrationServerRequest]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 1 Expose variable [SgxRegistrationPackageInfo]: SetVariable: Success ExposeToOsRuntime: 0 ReadOnlyOsRuntime: 0 Expose variable [SgxRegistrationStatus]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 Success to expose Registration Variables, exiting... [SGX] SgxAfterPlatformLocksCallback exit: success (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP HPE ProLiant DL360 Gen10 Plus System ROM Version: U46 v1.58 (01/13/2022) Serial Number: CZ22080FY9 Installed System Memory: 512 GB, Available System Memory: 512 GB 2 Processor(s) detected, 56 total cores enabled, Hyperthreading is enabled Proc 1: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz Proc 2: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz UPI Speed: 11.2 GT/s Workload Profile: Virtualization - Max Performance Power Regulator Mode: Static High Performance Advanced Memory Protection Mode: Fast Fault Tolerant Memory (ADDDC) RAS Mode: Firmware First Boot Mode: UEFI (Secure Boot) HPE Memory authenticated in all populated DIMM slots. ERROR: C80000002:V801000DD I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A5320 BuildDiskDriveTable: Cannot find more legal ports for SATA drive. Done! IsDevSmartArrayCtrl: AIP GetInformation for gEfiHpSmartArrayFeatures failed! Status = Unsupported HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) PopulateAndCreateDimmCurrentConfigRecords: Unable to retrieve size of InterleaveSets variable, Status = Not Found Embedded : iLO 5 embedded health Device - Repair Required Embedded : iLO 5 embedded health Device - Repair Required System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. ERROR: C80000002:V801000A6 I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. F1 pressed continue to boot in 18 seconds... T_TEST: Build ATSR SocketIndex=0. IIO_resource.valid=1. 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 T_TEST: Build ATSR SocketIndex=1. IIO_resource.valid=1.le or errors detected ReportDmar: Could not find RAC buffer or buffer size is 0! Status = Success HeciIeSetPowerRegulatorSetting: IEPS_CMD_SET_POWER_REGULATOR_REQ FAILURE(ResponseCode: 0x78) TPM Location configured (expected values: dTPM = 0x5 = 0x5 Value at TPM Base Address (0xFED40000) = 0xA1 HierarchyChangeAuth: Response Code error! 0x000009A2 Starting all devices for entering Boot Menu. Please wait...... BootMenuEntryCallback: Qid 0x801C to BootOption 0x14 RHEL CoreOS (Live) Use the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt. EFI stub: UEFI Secure Boot is enabled. Secure Start verification in progress. This may take a few seconds... Recommended Terminal Window Size = 100x31 ========================================= HPE ProLiant System BIOS U46 v1.58 (01/13/2022) (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP Early system initialization, please wait... iLO 5 IPv4: iLO 5 IPv6: iLO 5 IPv4: 10.8.247.46 iLO 5 IPv6: FE80::5EBA:2CFF:FE43:832A Fail to process new found FV, FV may be corrupted! ERROR: Internal fabric error detected!! PSF PID:0xBA, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0xBC, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0x2 ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x29, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x21, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x0, Port:0x0, Channel:0, error bits:0xFFFFFFFF ERROR: Internal fabric error detected!! PSF PID:0x36, RSx/PortGroup:0x1, Port:0x0, Channel:0, error bits:0xFFFFFFFF InstallHeciTransportPpis, start InstallHeciTransportPpis, end [HECI CONTROL PEI] HECI Transport found: 2 [HECI] [ME] (MeType is ME_TYPE_SPS) Initialization is allowed Initialization is not allowed Initialization is not allowed 2%: System Chipset Initialization Couldn't read Flash Security Override [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) Error: Update PEI FuSa (SAF) policy! Status: Not Found LtStatusRegister[0xFED30000] = 0x0000000000004092 LtExtendedStatusError[0xFED30008] = 0x0000000000000000 BootGuardBootStatus[0xFED300A0] = 0x9D54000080002000 BootGuardAcmError[0xFED30328] = 0x00000000C0008000 MSR_BOOT_GUARD_SACM_INFO[0x0000013A] = 0x0000000F0000007D Platform Type = 10 [SPS] NM not enabled in ME (MEFS1: 0x010F0345, NMFS: 0x00000000) MeUmaConfigureRequestedSegmentSize: Exiting (Status = Success) 4%: UPI Link Initialization - Start [IIO](UBA) [0.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p01] 0 | 1 | 1 | 0 | 0x00 | 0 [IIO](UBA) [0 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p05] 0 | 1 | 2 | 0 | 0x00 | 0 [IIO](UBA) [0 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.4] Bifurcation = 3 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p13] 0 | 1 | 255 | 0 | 0x00 | 0 [IIO](UBA) [0 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0 p15] 0 | 1 | 10 | 0 | 0x00 | 0 [IIO](UBA) [0 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [0.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [0 p17] 0 | 1 | 13 | 1 | 0x00 | 0 [IIO](UBA) [0 p18] 0 | 1 | 14 | 1 | 0x00 | 0 [IIO](UBA) [0 p19] 0 | 1 | 15 | 1 | 0x00 | 0 [IIO](UBA) [0 p20] 0 | 1 | 16 | 1 | 0x00 | 0 [IIO](UBA) [1.1] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p01] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p02] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p03] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p04] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.2] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p05] 0 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p06] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p07] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p08] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.4] Bifurcation = 4 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p13] 0 | 1 | 3 | 0 | 0x00 | 0 [IIO](UBA) [1 p14] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p15] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1 p16] 1 | 0 | 0 | 0 | 0x00 | 0 [IIO](UBA) [1.5] Bifurcation = 0 [IIO](UBA) [ IDX ], PortHide, SlotImpl, SlotNumber, HotPlug, Vpp, Interlock [IIO](UBA) [1 p17] 0 | 1 | 29 | 1 | 0x00 | 0 [IIO](UBA) [1 p18] 0 | 1 | 30 | 1 | 0x00 | 0 [IIO](UBA) [1 p19] 0 | 1 | 31 | 1 | 0x00 | 0 [IIO](UBA) [1 p20] 0 | 1 | 32 | 1 | 0x00 | 0 BuildCpuTopologyInfoHob: Failed to Build Cpu Info Hob 5%: UPI Link Initialization - Complete [IIO](VMD) [0] VMD disabled for RPs init. PCH Detect: MMIO base on Socket 1, is 0, skipping! WARNING: Platform does not support uplink port! [IIO](VMD) [1] VMD disabled for RPs init. 7%: Early Processor Initialization PrevBootErrors: No Memory MCA Error Found PrevBootErrors - Valid MCA UC entries: 0 9%: Memory Initialization - Start C00: REFRESH_SYNC_TIME_PerCh= 7800 C00: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C01: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C02: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C03: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C04: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C05: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C06: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C07: REFRESH_SYNC_TIME_PerCh= 7800 C00: HostRefreshStartTime= 7800 C00: HostRefreshStartTime= 7800 C01: HostRefreshStartTime= 7807 C01: HostRefreshStartTime= 7800 C02: HostRefreshStartTime= 7809 C02: HostRefreshStartTime= 7807 C03: HostRefreshStartTime= 7793 C03: HostRefreshStartTime= 7801 C04: HostRefreshStartTime= 7703 C04: HostRefreshStartTime= 7708 C05: HostRefreshStartTime= 7800 C05: HostRefreshStartTime= 7791 C06: HostRefreshStartTime= 7789 C06: HostRefreshStartTime= 7795 C07: HostRefreshStartTime= 7790 C07: HostRefreshStartTime= 7790 EnableHostRefresh Start Write Time diff[1]=118 ns EnableHostRefresh Start Write Time diff[1]=121 ns EnableHostRefresh Start Write Time diff[2]=269 ns EnableHostRefresh Start Write Time diff[2]=222 ns EnableHostRefresh Start Write Time diff[3]=210 ns EnableHostRefresh Start Write Time diff[3]=229 ns EnableHostRefresh Start Write Time diff[4]=257 ns EnableHostRefresh Start Write Time diff[4]=232 ns EnableHostRefresh Start Write Time diff[5]=271 ns EnableHostRefresh Start Write Time diff[5]=256 ns EnableHostRefresh Start Write Time diff[6]=258 ns EnableHostRefresh Start Write Time diff[6]=227 ns EnableHostRefresh Start Write Time diff[7]=270 ns EnableHostRefresh Start Write Time diff[7]=233 ns PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableMctpForwardingForSlot failed! Status = Not Found PciePostInit: IsUserDisableEOIForwardingForSlot failed! Status = Not Found [IIO](VMD) VMD init registered on endOfPei. WARNING: 00:46:04.0: Device 1077-8070 link width trained below capability WARNING: (RPLINKCAP 0x0F7A4084, RPLINKSTS 0x00003043) WARNING: (EPLINKCAP 0x0045F083, EPLINKSTS 0x00001043) PeiMemoryBaseAddress: 0x000000000E66E000. 18%: Memory Initialization - Complete ME UMA PostMem: SendDramInitDone (): InitStat = 0 ME UMA PostMem: BiosAction = 7 ME UMA PostMem: MeDramInitDone Complete. Checking for reset... Initialization is not allowed Platform Type = 10 Fail to process new found FV, FV may be corrupted! Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 TPM Measurement - Start TPM Measurement - Complete LocatePpi status = Success [SmbusErrataFix.c] Execute EfiSmbusSendByte (0xE2) mdatabyte = 4, Status = Device Error Install SgxInit Ppi : 0 Error: SgxRegistrationStatus report error code: 0x15 SGX disabled, exiting [IIO](TH) PCH Trace Hub not accessible [IPMI] mIpmiInstance->KcsTimeoutPeriod: 0x186A0 [IPMI] BMC Device ID: 0x13, firmware version: 2.60 UpdateMode:0 IPMI Dxe:Get BMC Device Id 21%: SMBIOS Table Initialization No ME Policy Protocol availableNo ME Policy Protocol availableUsbPortXhci Dxe driver:PlatformType=10 ConvertPages: failed to find range 94000000 - 97FFFFFF AllocateManagementDeviceBarSpace: SetMemorySpaceAttributes for Flash Device region failed! Status = 00000002 25%: USB Controller Initialization 28%: Chipset Root Ports Initialization 32%: HPE Memory Initialization HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr AE. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A0. HpIicWriteRead: i2c Error 0000007A from device at Bus FF Addr A2. ConvertPages: failed to find range 70000000 - 77BFFFFF HpTranslateTlsCipherList (715): Input / output data is null or input data size is invalid [OtaDxe.c] OtaDxeDriverEntry() { [OtaDxe.c] OtaDxeDriverEntry() -> Create OTA Event [OtaDxe.c] OtaDxeDriverEntry() -> OTA Event creation: Success [OtaDxe.c] OtaDxeDriverEntry() } Success [OtaShellCommands.c] OtaShellCommandsEntry() { [OtaShellCommands.c] OtaShellCommandsEntry() -> Init OTA Shell Commands Table [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaShell -> Success [OtaShellCommands.c] OtaShellCommandsEntry() -> Install OTA Shell Command: OtaConfig -> Success [OtaShellCommands.c] OtaShellCommandsEntry() } Success Common PPM policy update, PackageCState:0 Run PPM in PEI: 0 ConvertPages: failed to find range F0000 - FFFFF ConvertPages: failed to find range 6F800000 - 6FFFFFFF ConvertPages: failed to find range 70000000 - 77BFFFFF ConvertPages: failed to find range 77C00000 - 7FFFFFFF ConvertPages: failed to find range 80000000 - 8FFFFFFF ConvertPages: failed to find range 90000000 - 93FFFFFF ConvertPages: failed to find range 94000000 - 97FFFFFF ConvertPages: failed to find range 98000000 - 99C0FFFF ConvertPages: failed to find range 99C10000 - A47FBFFF ConvertPages: failed to find range A4800000 - AE3FBFFF ConvertPages: failed to find range AE400000 - B7FFBFFF ConvertPages: failed to find range B8000000 - C1BFBFFF ConvertPages: failed to find range C1C00000 - CAFFBFFF ConvertPages: failed to find range CB800000 - D4FFBFFF ConvertPages: failed to find range D5000000 - DEBFBFFF ConvertPages: failed to find range DEC00000 - E87FBFFF ConvertPages: failed to find range E8800000 - F23FBFFF ConvertPages: failed to find range F2400000 - FB7FBFFF ConvertPages: failed to find range FD000000 - FDFFFFFF ConvertPages: failed to find range FE000000 - FE00FFFF ConvertPages: failed to find range FE010000 - FE7FFFFF ConvertPages: failed to find range FEC00000 - FEC00FFF ConvertPages: failed to find range FEC80000 - FED00FFF ConvertPages: failed to find range 200000000000 - 29FFFFFFFFFF 36%: System Security Initialization SMBIOS Package[0] - Processor[0] SMBIOS Package[1] - Processor[56] CPU[000]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 CPU[056]: ThreadCountOfPackage=56 ThreadCountOfDie=56 ThreadCountOfCore=2 No PMems, Crystal Ridge Drvier is not going to be loaded. [IIO](TH) Trace Hub requested memory Size is 0. Not allocating memory. [IIO](TH) PCH Trace Hub not accessible. Disabled. [IIO](TH) ERROR Failed to configure PCH Trace Hub. Status= Not Ready ERROR: IioTraceHubInitialize failed. Status= Not Ready [IIO](SPK) IioSpkSocketInitialize: SocketId: 0 [IIO](SPK) IioSpkSocketInitialize: SocketId: 1 39%: iLO Embedded Health Initialization Run PPM in DXE 43%: ACPI Table Initialization TXT is disabled MeasurementTmeState() retrun error: Not Found MeasurementMktmeState() retrun error: Not Found Measurment MSR: MRTEATVT return error Not Found Measurment MSR: MRTECPBLT return error Not Found Measurment MSR: MRTEECUEBS return error Not Found Measurment MSR: MRTEECUEMS return error Not Found Measurement failed for one or more MSRs. retrun error: Not Found Warning: SGX is disabled on this system. [SGX] SgxDisabled_SgxLateInit: Success [SGX] SgxErrorCode = 0x0 Can not load NvDimmFwUpdateDriverEntryPoint : Type 1 NVDIMM support unavailable 46%: BIOS Configuration Initialization RbsuSetupDxeEntry, failed to initial product lines feature: Unsupported CheckDebugCertificateStatus: unpack error. 53%: Early PCI Initialization - Start PciRootBridgeEnumeratorPciDeviceTable: PCI-PCI Bridge found but not in PCI Device Table, Bus=0 PciRootBridgeEnumeratorPciDeviceTable: Continuing in ~8 sec. PchUplink programming error! Can not find the Uplink x16 port. [IE_HECI-0] Resetting HECI interface (CSR 80848408/80272709) 61%: Early PCI Initialization - Complete 71%: Switching console output to Primary Video. Please wait... :INIT - BIOS_RESET_CPL: Set CPL3 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S1 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL3 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :INIT - BIOS_RESET_CPL: Set CPL4 on #S0 into BIOS_RESET_CPL_PCU_FUN1_REG :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** :PPM: SST-PP is incapable or Dynamic SST-PP is disabled, setting CSR_DESIRED_CORES_PCU_FUN1 lock bit o **Warning! Last debug message is truncated for format string length.** [SGX] SgxAfterPlatformLocksCallback entry BiosParamInfo TopologyInfo CpuSvn is 0 [SGX] UpdateRegistrationPackageInfo BEGIN [SGX] UpdateRegistrationPackageInfo END ExposeAllScenariosSgxRegistrationUefiVariables Enter Expose variable [SgxRegistrationConfiguration]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 RegistrationRequestType 0 Expose variable [SgxRegistrationServerRequest]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 1 Expose variable [SgxRegistrationPackageInfo]: SetVariable: Success ExposeToOsRuntime: 0 ReadOnlyOsRuntime: 0 Expose variable [SgxRegistrationStatus]: SetVariable: Success ExposeToOsRuntime: 1 ReadOnlyOsRuntime: 0 Success to expose Registration Variables, exiting... [SGX] SgxAfterPlatformLocksCallback exit: success (C) Copyright 1982-2022 Hewlett Packard Enterprise Development LP HPE ProLiant DL360 Gen10 Plus System ROM Version: U46 v1.58 (01/13/2022) Serial Number: CZ22080FY9 Installed System Memory: 512 GB, Available System Memory: 512 GB 2 Processor(s) detected, 56 total cores enabled, Hyperthreading is enabled Proc 1: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz Proc 2: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz UPI Speed: 11.2 GT/s Workload Profile: Virtualization - Max Performance Power Regulator Mode: Static High Performance Advanced Memory Protection Mode: Fast Fault Tolerant Memory (ADDDC) RAS Mode: Firmware First Boot Mode: UEFI (Secure Boot) HPE Memory authenticated in all populated DIMM slots. ERROR: C80000002:V801000DD I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A5320 BuildDiskDriveTable: Cannot find more legal ports for SATA drive. Done! IsDevSmartArrayCtrl: AIP GetInformation for gEfiHpSmartArrayFeatures failed! Status = Unsupported HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) HpReadFruStructure: CHIF SendReceive iLO error response = 0x8 GetFruOnCard: Failed to read FRU data of this i2c segment(98)/address(A0) PopulateAndCreateDimmCurrentConfigRecords: Unable to retrieve size of InterleaveSets variable, Status = Not Found Embedded : iLO 5 embedded health Device - Repair Required Embedded : iLO 5 embedded health Device - Repair Required System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. System Power Supply: Input Power Loss or Unplugged Power Cord, Verify Power Supply Input (Power Supply 2) ACTION: Check the power source, then test and replace any failed power supplies. ERROR: C80000002:V801000A6 I0 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. System Power Supplies Not Redundant ACTION: Add a power supply or replace the failed power supply. F1 pressed continue to boot in 17 seconds... T_TEST: Build ATSR SocketIndex=0. IIO_resource.valid=1. 85CC8B8F-F2B6-11E1-B12E-3C4A92B21913 598A55A0 T_TEST: Build ATSR SocketIndex=1. IIO_resource.valid=1.le or errors detected ReportDmar: Could not find RAC buffer or buffer size is 0! Status = Success HeciIeSetPowerRegulatorSetting: IEPS_CMD_SET_POWER_REGULATOR_REQ FAILURE(ResponseCode: 0x78) TPM Location configured (expected values: dTPM = 0x5 = 0x5 Value at TPM Base Address (0xFED40000) = 0xA1 HierarchyChangeAuth: Response Code error! 0x000009A2 Starting all devices for entering Boot Menu. Please wait..... BootMenuEntryCallback: Qid 0x801C to BootOption 0x14 RHEL CoreOS (Live) Use the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt. setparams 'RHEL CoreOS (Live)' linux /images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044\ -0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 initrd /images/pxeboot/initrd.img /images/ignition.img Press Ctrl-x to start, Ctrl-c for a command prompt or Escape to discard edits and return to the menu. Pressing Tab lists possible completions. EFI stub: UEFI Secure Boot is enabled. [ 0.000000] microcode: microcode updated early to revision 0xd000363, date = 2022-03-30 [ 0.000000] Linux version 4.18.0-305.62.1.el8_4.x86_64 (mockbuild@x86-vm-07.build.eng.bos.redhat.com) (gcc version 8.4.1 20200928 (Red Hat 8.4.1-1) (GCC)) #1 SMP Thu Aug 11 12:07:27 EDT 2022 [ 0.000000] Command line: BOOT_IMAGE=/images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044-0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 [ 0.000000] x86/split lock detection: disabled [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 [ 0.000000] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 [ 0.000000] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 [ 0.000000] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 [ 0.000000] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x0000000000093fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000094000-0x000000000009efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f334fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003f335000-0x000000003f337fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000003f338000-0x0000000053c6bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000053c6c000-0x0000000053c9bfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000053c9c000-0x00000000558ebfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000558ec000-0x000000005846cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000005846d000-0x00000000584fdfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000584fe000-0x00000000595fdfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000595fe000-0x0000000059804fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000059805000-0x0000000059885fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000059886000-0x000000006f7fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000006f800000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000098000000-0x0000000099c0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000807fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000008ffff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000090000-0x0000000000093fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000094000-0x000000000009efff] usable [ 0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003f334fff] usable [ 0.000000] reserve setup_data: [mem 0x000000003f335000-0x000000003f337fff] ACPI data [ 0.000000] reserve setup_data: [mem 0x000000003f338000-0x00000000504fa017] usable [ 0.000000] reserve setup_data: [mem 0x00000000504fa018-0x000000005056b857] usable [ 0.000000] reserve setup_data: [mem 0x000000005056b858-0x000000005056c017] usable [ 0.000000] reserve setup_data: [mem 0x000000005056c018-0x00000000505dd857] usable [ 0.000000] reserve setup_data: [mem 0x00000000505dd858-0x00000000505de017] usable [ 0.000000] reserve setup_data: [mem 0x00000000505de018-0x000000005060d057] usable [ 0.000000] reserve setup_data: [mem 0x000000005060d058-0x000000005060e017] usable [ 0.000000] reserve setup_data: [mem 0x000000005060e018-0x0000000050619257] usable [ 0.000000] reserve setup_data: [mem 0x0000000050619258-0x000000005061a017] usable [ 0.000000] reserve setup_data: [mem 0x000000005061a018-0x0000000050622057] usable [ 0.000000] reserve setup_data: [mem 0x0000000050622058-0x0000000053c6bfff] usable [ 0.000000] reserve setup_data: [mem 0x0000000053c6c000-0x0000000053c9bfff] ACPI data [ 0.000000] reserve setup_data: [mem 0x0000000053c9c000-0x00000000558ebfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000558ec000-0x000000005846cfff] usable [ 0.000000] reserve setup_data: [mem 0x000000005846d000-0x00000000584fdfff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000584fe000-0x00000000595fdfff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000595fe000-0x0000000059804fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000059805000-0x0000000059885fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000059886000-0x000000006f7fffff] usable [ 0.000000] reserve setup_data: [mem 0x000000006f800000-0x000000008fffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000098000000-0x0000000099c0ffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe00ffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000807fffffff] usable [ 0.000000] efi: EFI v2.70 by HPE [ 0.000000] efi: SMBIOS=0x540a8000 SMBIOS 3.0=0x540a6000 ACPI=0x53c9b000 ACPI 2.0=0x53c9b014 TPMFinalLog=0x5855d000 MEMATTR=0x3c3ac018 MOKvar=0x540a5000 TPMEventLog=0x50623018 [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7 [ 0.000000] SMBIOS 3.4.0 present. [ 0.000000] DMI: HPE ProLiant DL360 Gen10 Plus/ProLiant DL360 Gen10 Plus, BIOS U46 01/13/2022 [ 0.000000] tsc: Detected 2200.000 MHz processor [ 0.000000] last_pfn = 0x8080000 max_arch_pfn = 0x10000000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 1046512M [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 128K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 256K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 512K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 64K chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 128K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 256K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 512K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 128K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 128K chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 256K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 512K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 256K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 256K chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 512K num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 512K chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 512K chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 1M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 1M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 1M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 2M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 2M chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 2M chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 2M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 2M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 2M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 4M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 4M chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 4M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 4M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 4M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 8M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 8M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 8M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 8M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 16M num_reg: 10 lose cover RAM: 992G [ 0.000000] gran_size: 16M chunk_size: 32M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 64M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 128M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 256M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 512M num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 1G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 16M chunk_size: 2G num_reg: 10 lose cover RAM: 0G [ 0.000000] gran_size: 32M chunk_size: 32M num_reg: 10 lose cover RAM: 983056M [ 0.000000] gran_size: 32M chunk_size: 64M num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 128M num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 256M num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 512M num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 1G num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 32M chunk_size: 2G num_reg: 10 lose cover RAM: 16M [ 0.000000] gran_size: 64M chunk_size: 64M num_reg: 10 lose cover RAM: 917552M [ 0.000000] gran_size: 64M chunk_size: 128M num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 64M chunk_size: 256M num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 64M chunk_size: 512M num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 64M chunk_size: 1G num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 64M chunk_size: 2G num_reg: 10 lose cover RAM: 48M [ 0.000000] gran_size: 128M chunk_size: 128M num_reg: 10 lose cover RAM: 786544M [ 0.000000] gran_size: 128M chunk_size: 256M num_reg: 10 lose cover RAM: 112M [ 0.000000] gran_size: 128M chunk_size: 512M num_reg: 10 lose cover RAM: 112M [ 0.000000] gran_size: 128M chunk_size: 1G num_reg: 10 lose cover RAM: 112M [ 0.000000] gran_size: 128M chunk_size: 2G num_reg: 10 lose cover RAM: 112M [ 0.000000] gran_size: 256M chunk_size: 256M num_reg: 10 lose cover RAM: 524528M [ 0.000000] gran_size: 256M chunk_size: 512M num_reg: 10 lose cover RAM: 240M [ 0.000000] gran_size: 256M chunk_size: 1G num_reg: 10 lose cover RAM: 240M [ 0.000000] gran_size: 256M chunk_size: 2G num_reg: 10 lose cover RAM: 240M [ 0.000000] gran_size: 512M chunk_size: 512M num_reg: 10 lose cover RAM: 496M [ 0.000000] gran_size: 512M chunk_size: 1G num_reg: 10 lose cover RAM: 496M [ 0.000000] gran_size: 512M chunk_size: 2G num_reg: 10 lose cover RAM: 496M [ 0.000000] gran_size: 1G chunk_size: 1G num_reg: 9 lose cover RAM: 1008M [ 0.000000] gran_size: 1G chunk_size: 2G num_reg: 9 lose cover RAM: 1008M [ 0.000000] gran_size: 2G chunk_size: 2G num_reg: 8 lose cover RAM: 2032M [ 0.000000] mtrr_cleanup: can not find optimal value [ 0.000000] please specify mtrr_gran_size/mtrr_chunk_size [ 0.000000] x2apic: enabled by BIOS, switching to x2apic ops [ 0.000000] last_pfn = 0x6f800 max_arch_pfn = 0x10000000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] RAMDISK: [mem 0x22891000-0x27febfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000053C9B014 000024 (v02 HPE ) [ 0.000000] ACPI: XSDT 0x0000000053C84188 000124 (v01 HPE Server 00000001 01000013) [ 0.000000] ACPI: FACP 0x0000000053C8E000 00010C (v06 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: DSDT 0x0000000053C74000 00B195 (v02 HPE Server 00000002 HPE 00020000) [ 0.000000] ACPI: FACS 0x000000005855B000 000040 [ 0.000000] ACPI: SSDT 0x0000000053C99000 000C0A (v02 HPE ADDRXLAT 00000001 INTL 20181003) [ 0.000000] ACPI: ERST 0x0000000053C98000 000250 (v01 HPE Server 00000001 INTL 00000001) [ 0.000000] ACPI: MCEJ 0x0000000053C97000 000130 (v01 HPE Server 00000001 INTL 0100000D) [ 0.000000] ACPI: BERT 0x0000000053C96000 000030 (v01 HPE Server 00000001 INTL 00000001) [ 0.000000] ACPI: PMTT 0x0000000053C94000 000908 (v02 HPE Server 00000001 INTL 20091013) [ 0.000000] ACPI: SSDT 0x0000000053C93000 000562 (v01 HPE SgxSsdt 00000001 INTL 20181003) [ 0.000000] ACPI: HEST 0x0000000053C92000 00017C (v01 HPE Server 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 0x0000000053C91000 000170 (v01 HPE Server 00000001 INTL 00000001) [ 0.000000] ACPI: SSDT 0x0000000053C90000 00061B (v02 HPE Tpm2Tabl 00001000 INTL 20181003) [ 0.000000] ACPI: TPM2 0x0000000053C8F000 00004C (v04 HPE Server 00000002 01000013) [ 0.000000] ACPI: SSDT 0x0000000053C95000 00003A (v02 HPE PLATOPRG 00000001 INTL 20181003) [ 0.000000] ACPI: HPET 0x0000000053C8D000 000038 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: WDDT 0x0000000053C8C000 000040 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: APIC 0x0000000053C8B000 000C8C (v05 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: MCFG 0x0000000053C8A000 00003C (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SLIT 0x0000000053C89000 00003C (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SRAT 0x0000000053C88000 000B78 (v03 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: HMAT 0x0000000053C87000 000188 (v02 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SPMI 0x0000000053C86000 000041 (v05 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SPCR 0x0000000053C85000 000050 (v02 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: MSCT 0x0000000053C9A000 000090 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: BDAT 0x0000000053C83000 000030 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: WSMT 0x0000000053C82000 000028 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: PCCT 0x0000000053C81000 000030 (v02 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: DMAR 0x0000000053C80000 000280 (v01 HPE Server 00000001 1590 00000001) [ 0.000000] ACPI: SSDT 0x0000000053C6E000 0050DC (v02 HPE PCISSDT 00000002 HPE 00020000) [ 0.000000] ACPI: SSDT 0x0000000053C6D000 0001C9 (v02 HPE TIMESSDT 00000002 HPE 00020000) [ 0.000000] ACPI: SSDT 0x0000000053C6C000 000302 (v01 HPE pmab 00000001 1590 20181003) [ 0.000000] ACPI: OEM1 0x000000003F337000 000430 (v02 HPE CPU CPC 00000002 HPE 00020000) [ 0.000000] ACPI: BGRT 0x000000003F336000 000038 (v01 HPE Server 00000002 1590 01000013) [ 0.000000] ACPI: FPDT 0x000000003F335000 000034 (v01 HPE Server 00000002 01000013) [ 0.000000] Setting APIC routing to cluster x2apic. [ 0.000000] SRAT: PXM 0 -> APIC 0x0000 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0002 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0004 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0006 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0008 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000a -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000c -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000e -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0010 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0012 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0014 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0016 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0018 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x001a -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x001c -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x001e -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0020 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0022 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0024 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0026 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0028 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002a -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002c -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002e -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0030 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0032 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0034 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0036 -> Node 1 [ 0.000000] SRAT: PXM 2 -> APIC 0x0080 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0082 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0084 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0086 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0088 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008a -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008c -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008e -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0090 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0092 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0094 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0096 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0098 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x009a -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 0x009c -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x009e -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a0 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a2 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a4 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a6 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a8 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00aa -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00ac -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00ae -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b0 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b2 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b4 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b6 -> Node 3 [ 0.000000] SRAT: PXM 0 -> APIC 0x0001 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0003 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0005 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0007 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0009 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000b -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000d -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x000f -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0011 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0013 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0015 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0017 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x0019 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x001b -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 0x001d -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x001f -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0021 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0023 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0025 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0027 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0029 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002b -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002d -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x002f -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0031 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0033 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0035 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 0x0037 -> Node 1 [ 0.000000] SRAT: PXM 2 -> APIC 0x0081 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0083 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0085 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0087 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0089 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008b -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008d -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x008f -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0091 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0093 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0095 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0097 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x0099 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 0x009b -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 0x009d -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x009f -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a1 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a3 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a5 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a7 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00a9 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00ab -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00ad -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00af -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b1 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b3 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b5 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 0x00b7 -> Node 3 [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x207fffffff] [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x2080000000-0x407fffffff] [ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x4080000000-0x607fffffff] [ 0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x6080000000-0x807fffffff] [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x207fffffff] -> [mem 0x00000000-0x207fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x207ffd6000-0x207fffffff] [ 0.000000] NODE_DATA(1) allocated [mem 0x407ffd6000-0x407fffffff] [ 0.000000] NODE_DATA(2) allocated [mem 0x607ffd6000-0x607fffffff] [ 0.000000] NODE_DATA(3) allocated [mem 0x807ffd3000-0x807fffcfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000807fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008ffff] [ 0.000000] node 0: [mem 0x0000000000094000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003f334fff] [ 0.000000] node 0: [mem 0x000000003f338000-0x0000000053c6bfff] [ 0.000000] node 0: [mem 0x00000000558ec000-0x000000005846cfff] [ 0.000000] node 0: [mem 0x00000000595fe000-0x0000000059804fff] [ 0.000000] node 0: [mem 0x0000000059886000-0x000000006f7fffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000207fffffff] [ 0.000000] node 1: [mem 0x0000002080000000-0x000000407fffffff] [ 0.000000] node 2: [mem 0x0000004080000000-0x000000607fffffff] [ 0.000000] node 3: [mem 0x0000006080000000-0x000000807fffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 14075 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000207fffffff] [ 0.000000] Initmem setup node 1 [mem 0x0000002080000000-0x000000407fffffff] [ 0.000000] Initmem setup node 2 [mem 0x0000004080000000-0x000000607fffffff] [ 0.000000] Initmem setup node 3 [mem 0x0000006080000000-0x000000807fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: X2APIC_NMI (uid[0x00] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x01] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x02] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x03] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x04] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x05] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x06] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x07] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x08] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x09] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x0f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x10] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x11] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x12] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x13] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x14] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x15] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x16] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x17] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x18] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x19] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x1f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x20] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x21] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x22] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x23] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x24] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x25] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x26] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x27] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x28] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x29] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x2f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x30] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x31] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x32] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x33] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x34] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x35] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x36] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x37] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x80] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x81] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x82] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x83] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x84] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x85] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x86] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x87] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x88] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x89] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x8f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x90] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x91] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x92] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x93] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x94] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x95] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x96] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x97] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x98] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x99] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9a] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9b] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9c] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9d] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9e] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0x9f] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa0] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa1] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa2] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa3] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa4] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa5] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa6] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa7] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa8] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xa9] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xaa] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xab] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xac] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xad] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xae] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xaf] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb0] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb1] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb2] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb3] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb4] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb5] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb6] high level lint[0x1]) [ 0.000000] ACPI: X2APIC_NMI (uid[0xb7] high level lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-119 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] ACPI: SPCR: console: uart,mmio,0x0,115200 [ 0.000000] smpboot: Allowing 112 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x00093fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x3edaf000-0x3eddffff] [ 0.000000] PM: Registered nosave memory: [mem 0x3f335000-0x3f337fff] [ 0.000000] PM: Registered nosave memory: [mem 0x504fa000-0x504fafff] [ 0.000000] PM: Registered nosave memory: [mem 0x5056b000-0x5056bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5056c000-0x5056cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x505dd000-0x505ddfff] [ 0.000000] PM: Registered nosave memory: [mem 0x505de000-0x505defff] [ 0.000000] PM: Registered nosave memory: [mem 0x5060d000-0x5060dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5060e000-0x5060efff] [ 0.000000] PM: Registered nosave memory: [mem 0x50619000-0x50619fff] [ 0.000000] PM: Registered nosave memory: [mem 0x5061a000-0x5061afff] [ 0.000000] PM: Registered nosave memory: [mem 0x50622000-0x50622fff] [ 0.000000] PM: Registered nosave memory: [mem 0x53c6c000-0x53c9bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x53c9c000-0x558ebfff] [ 0.000000] PM: Registered nosave memory: [mem 0x5846d000-0x584fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x584fe000-0x595fdfff] [ 0.000000] PM: Registered nosave memory: [mem 0x59805000-0x59885fff] [ 0.000000] PM: Registered nosave memory: [mem 0x6f800000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x97ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x98000000-0x99c0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x99c10000-0xfdffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe00ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe010000-0xffffffff] [ 0.000000] [mem 0x99c10000-0xfdffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:112 nr_cpu_ids:112 nr_node_ids:4 [ 0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.000000] Built 4 zonelists, mobility grouping on. Total pages: 132042185 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044-0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 [ 0.000000] Specific versions of hardware are certified with Red Hat Enterprise Linux 8. Please see the list of hardware certified with Red Hat Enterprise Linux 8 at https://catalog.redhat.com. [ 0.000000] Memory: 1744468K/536552468K available (12293K kernel code, 2225K rwdata, 7716K rodata, 2480K init, 14040K bss, 9015876K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=112, Nodes=4 [ 0.000000] ftrace: allocating 38610 entries in 151 pages [ 0.000000] ftrace: allocated 151 pages with 5 groups [ 0.001000] rcu: Hierarchical RCU implementation. [ 0.001000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=112. [ 0.001000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.001000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=112 [ 0.001000] NR_IRQS: 524544, nr_irqs: 2952, preallocated irqs: 16 [ 0.001000] random: crng done (trusting CPU's manufacturer) [ 0.001000] Console: colour dummy device 80x25 [ 0.001000] printk: console [tty0] enabled [ 0.001000] printk: console [ttyS0] enabled [ 0.001000] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl [ 0.001000] ACPI: Core revision 20200925 [ 0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.001006] APIC: Switch to symmetric I/O mode setup [ 0.002004] DMAR: Host address width 46 [ 0.003003] DMAR: DRHD base: 0x000000d4ffc000 flags: 0x0 [ 0.004007] DMAR: dmar0: reg_base_addr d4ffc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.005003] DMAR: DRHD base: 0x000000debfc000 flags: 0x0 [ 0.006006] DMAR: dmar1: reg_base_addr debfc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.007003] DMAR: DRHD base: 0x000000e87fc000 flags: 0x0 [ 0.008005] DMAR: dmar2: reg_base_addr e87fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.009003] DMAR: DRHD base: 0x000000f23fc000 flags: 0x0 [ 0.010005] DMAR: dmar3: reg_base_addr f23fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.011003] DMAR: DRHD base: 0x000000fb7fc000 flags: 0x0 [ 0.012005] DMAR: dmar4: reg_base_addr fb7fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.013003] DMAR: DRHD base: 0x000000ae3fc000 flags: 0x0 [ 0.014005] DMAR: dmar5: reg_base_addr ae3fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.015003] DMAR: DRHD base: 0x000000b7ffc000 flags: 0x0 [ 0.016005] DMAR: dmar6: reg_base_addr b7ffc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.017003] DMAR: DRHD base: 0x000000c1bfc000 flags: 0x0 [ 0.018007] DMAR: dmar7: reg_base_addr c1bfc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.019003] DMAR: DRHD base: 0x000000caffc000 flags: 0x0 [ 0.020005] DMAR: dmar8: reg_base_addr caffc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.021003] DMAR: DRHD base: 0x000000a47fc000 flags: 0x1 [ 0.022005] DMAR: dmar9: reg_base_addr a47fc000 ver 4:0 cap 8ed008c40780466 ecap 60000f050df [ 0.023003] DMAR: RMRR base: 0x0000005846e000 end: 0x00000058470fff [ 0.025004] DMAR: RMRR base: 0x000000584be000 end: 0x000000584befff [ 0.026003] DMAR: ATSR flags: 0x0 [ 0.027003] DMAR: ATSR flags: 0x0 [ 0.028004] DMAR-IR: IOAPIC id 8 under DRHD base 0xa47fc000 IOMMU 9 [ 0.029003] DMAR-IR: HPET id 0 under DRHD base 0xa47fc000 [ 0.030003] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.034099] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.037753] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.042004] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.043003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.00 BogoMIPS (lpj=2200000) [ 0.044001] pid_max: default: 114688 minimum: 896 [ 0.057792] Security Framework initialized [ 0.058001] Yama: becoming mindful. [ 0.059004] SELinux: Initializing. [ 0.084093] Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes) [ 0.096754] Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.098219] Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.099359] Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.101306] x86/cpu: SGX disabled by BIOS [ 0.102003] x86/tme: not enabled by BIOS [ 0.103003] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.104000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.105006] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.106073] CPU0: Thermal monitoring enabled (TM1) [ 0.107330] process: using mwait in idle threads [ 0.108002] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.109000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.110002] FEATURE SPEC_CTRL Present [ 0.111000] FEATURE IBPB_SUPPORT Present [ 0.112001] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.113001] Spectre V2 : Mitigation: Enhanced IBRS [ 0.114000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.115001] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.116001] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.118042] Freeing SMP alternatives memory: 32K [ 0.121746] smpboot: CPU0: Intel(R) Xeon(R) Gold 6330N CPU @ 2.20GHz (family: 0x6, model: 0x6a, stepping: 0x6) [ 0.122196] Performance Events: PEBS fmt4+-baseline, AnyThread deprecated, Icelake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.123001] ... version: 5 [ 0.124000] ... bit width: 48 [ 0.125000] ... generic registers: 8 [ 0.126000] ... value mask: 0000ffffffffffff [ 0.127000] ... max period: 00007fffffffffff [ 0.128000] ... fixed-purpose events: 4 [ 0.129000] ... event mask: 0001000f000000ff [ 0.130085] rcu: Hierarchical SRCU implementation. [ 0.139403] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.140016] smp: Bringing up secondary CPUs ... [ 0.141103] x86: Booting SMP configuration: [ 0.142002] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 [ 0.305002] .... node #1, CPUs: #14 [ 0.001000] ------------[ cut here ]------------ [ 0.001000] sched: CPU #14's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. [ 0.001000] WARNING: CPU: 14 PID: 0 at arch/x86/kernel/smpboot.c:435 topology_sane.isra.7+0x62/0x70 [ 0.001000] Modules linked in: [ 0.001000] CPU: 14 PID: 0 Comm: swapper/14 Not tainted 4.18.0-305.62.1.el8_4.x86_64 #1 [ 0.001000] Hardware name: HPE ProLiant DL360 Gen10 Plus/ProLiant DL360 Gen10 Plus, BIOS U46 01/13/2022 [ 0.001000] RIP: 0010:topology_sane.isra.7+0x62/0x70 [ 0.001000] Code: 0f 94 c0 c3 80 3d 8c cf 77 01 00 75 ef 89 f1 41 89 d9 89 fe 41 89 e8 48 c7 c7 e0 f5 6a 8b c6 05 72 cf 77 01 01 e8 c7 ae 08 00 <0f> 0b eb ce 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 53 48 [ 0.001000] RSP: 0000:ff4f95f64c5b3ec8 EFLAGS: 00010082 [ 0.001000] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8bc5f208 [ 0.001000] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046 [ 0.001000] RBP: 0000000000000001 R08: 00000000000002df R09: 0000000000000070 [ 0.001000] R10: 0000000000000000 R11: ff4f95f64c5b3d70 R12: 0000000000000000 [ 0.001000] R13: 000000000000f260 R14: 000000000000000e R15: 000000000000000e [ 0.001000] FS: 0000000000000000(0000) GS:ff40474bbf600000(0000) knlGS:0000000000000000 [ 0.001000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.001000] CR2: 0000000000000000 CR3: 00000002a8210001 CR4: 0000000000771ee0 [ 0.001000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 0.001000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 0.001000] PKRU: 00000000 [ 0.001000] Call Trace: [ 0.001000] set_cpu_sibling_map+0x149/0x5b0 [ 0.001000] start_secondary+0x97/0x1e0 [ 0.001000] secondary_startup_64_no_verify+0xc2/0xcb [ 0.001000] ---[ end trace 37d2ddd766365d71 ]--- [ 2.366175] #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 [ 2.531002] .... node #2, CPUs: #28 [ 0.001000] smpboot: CPU 28 Converting physical 0 to logical die 1 [ 2.768237] #29 #30 #31 #32 #33 #34 #35 #36 #37 #38 #39 #40 #41 [ 3.091002] .... node #3, CPUs: #42 #43 #44 #45 #46 #47 #48 #49 #50 #51 #52 #53 #54 #55 [ 3.267002] .... node #0, CPUs: #56 #57 #58 #59 #60 #61 #62 #63 #64 #65 #66 #67 #68 #69 [ 3.325001] .... node #1, CPUs: #70 #71 #72 #73 #74 #75 #76 #77 #78 #79 #80 #81 #82 #83 [ 3.385003] .... node #2, CPUs: #84 #85 #86 #87 #88 #89 #90 #91 #92 #93 #94 #95 #96 #97 [ 3.444002] .... node #3, CPUs: #98 #99 #100 #101 #102 #103 #104 #105 #106 #107 #108 #109 #110 #111 [ 3.503556] smp: Brought up 4 nodes, 112 CPUs [ 3.505001] smpboot: Max logical packages: 2 [ 3.506003] smpboot: Total of 112 processors activated (494014.52 BogoMIPS) [ 3.572097] node 0 deferred pages initialised in 62ms [ 3.575040] node 1 deferred pages initialised in 65ms [ 3.588059] node 2 deferred pages initialised in 78ms [ 3.612045] node 3 deferred pages initialised in 101ms [ 3.825059] devtmpfs: initialized [ 3.865042] x86/mm: Memory block size: 2048MB [ 3.919033] PM: Registering ACPI NVS region [mem 0x584fe000-0x595fdfff] (17825792 bytes) [ 4.017005] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 4.133077] futex hash table entries: 32768 (order: 9, 2097152 bytes) [ 4.211605] pinctrl core: initialized pinctrl subsystem [ 4.274270] NET: Registered protocol family 16 [ 4.328129] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 4.413010] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 4.507010] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 4.603020] audit: initializing netlink subsys (disabled) [ 4.668022] audit: type=2000 audit(1664548593.668:1): state=initialized audit_enabled=0 res=1 [ 4.770006] cpuidle: using governor menu [ 4.817004] Invalid PCCT: 0 PCC subspaces [ 4.866057] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 4.957003] ACPI: bus type PCI registered [ 5.005001] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 5.082175] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 5.194007] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 5.275012] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 5.400244] PCI: Using configuration type 1 for base access [ 5.468005] PCI: HP ProLiant DL360 detected, enabling pci=bfsort. [ 5.544394] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 5.625005] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 5.705165] cryptd: max_cpu_qlen set to 1000 [ 5.757186] fbcon: Taking over console [ 5.802238] ACPI: Added _OSI(Module Device) [ 5.853003] ACPI: Added _OSI(Processor Device) [ 5.906002] ACPI: Added _OSI(3.0 _SCP Extensions) [ 5.962001] ACPI: Added _OSI(Processor Aggregator Device) [ 6.027003] ACPI: Added _OSI(Linux-Dell-Video) [ 6.080001] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 6.144002] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 6.208767] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 6.291551] ACPI: Interpreter enabled [ 6.335008] ACPI: (supports S0 S5) [ 6.376002] ACPI: Using IOAPIC for interrupt routing [ 6.436052] HEST: Table parsing has been initialized. [ 6.496003] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 6.606627] ACPI: Enabled 3 GPEs in block 00 to 7F [ 6.670274] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7e]) [ 6.741005] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 6.854054] PCI host bridge to bus 0000:7e [ 6.903004] pci_bus 0000:7e: root bus resource [bus 7e] [ 6.966010] pci 0000:7e:00.0: [8086:3450] type 00 class 0x088000 [ 7.038066] pci 0000:7e:00.1: [8086:3451] type 00 class 0x088000 [ 7.110054] pci 0000:7e:00.2: [8086:3452] type 00 class 0x088000 [ 7.182054] pci 0000:7e:00.3: [8086:0998] type 00 class 0x060000 [ 7.254053] pci 0000:7e:00.5: [8086:3455] type 00 class 0x088000 [ 7.326061] pci 0000:7e:02.0: [8086:3440] type 00 class 0x088000 [ 7.398110] pci 0000:7e:02.1: [8086:3441] type 00 class 0x088000 [ 7.470105] pci 0000:7e:02.2: [8086:3442] type 00 class 0x088000 [ 7.542108] pci 0000:7e:03.0: [8086:3440] type 00 class 0x088000 [ 7.614074] pci 0000:7e:03.1: [8086:3441] type 00 class 0x088000 [ 7.686072] pci 0000:7e:03.2: [8086:3442] type 00 class 0x088000 [ 7.758054] pci 0000:7e:04.0: [8086:3440] type 00 class 0x088000 [ 7.830117] pci 0000:7e:04.1: [8086:3441] type 00 class 0x088000 [ 7.903114] pci 0000:7e:04.2: [8086:3442] type 00 class 0x088000 [ 7.975114] pci 0000:7e:04.3: [8086:3443] type 00 class 0x088000 [ 8.047115] pci 0000:7e:05.0: [8086:3445] type 00 class 0x088000 [ 8.119109] pci 0000:7e:05.1: [8086:3446] type 00 class 0x088000 [ 8.191107] pci 0000:7e:05.2: [8086:3447] type 00 class 0x088000 [ 8.263111] pci 0000:7e:06.0: [8086:3445] type 00 class 0x088000 [ 8.335075] pci 0000:7e:06.1: [8086:3446] type 00 class 0x088000 [ 8.407074] pci 0000:7e:06.2: [8086:3447] type 00 class 0x088000 [ 8.479081] pci 0000:7e:07.0: [8086:3445] type 00 class 0x088000 [ 8.551115] pci 0000:7e:07.1: [8086:3446] type 00 class 0x088000 [ 8.624119] pci 0000:7e:07.2: [8086:3447] type 00 class 0x088000 [ 8.696116] pci 0000:7e:0b.0: [8086:3448] type 00 class 0x088000 [ 8.768037] pci 0000:7e:0b.1: [8086:3448] type 00 class 0x088000 [ 8.840061] pci 0000:7e:0b.2: [8086:344b] type 00 class 0x088000 [ 8.912066] pci 0000:7e:0c.0: [8086:344a] type 00 class 0x110100 [ 8.984084] pci 0000:7e:0d.0: [8086:344a] type 00 class 0x110100 [ 9.056081] pci 0000:7e:0e.0: [8086:344a] type 00 class 0x110100 [ 9.128143] pci 0000:7e:0f.0: [8086:344a] type 00 class 0x110100 [ 9.200152] pci 0000:7e:1a.0: [8086:2880] type 00 class 0x110100 [ 9.272083] pci 0000:7e:1b.0: [8086:2880] type 00 class 0x110100 [ 9.345076] pci 0000:7e:1c.0: [8086:2880] type 00 class 0x110100 [ 9.417148] pci 0000:7e:1d.0: [8086:2880] type 00 class 0x110100 [ 9.489182] ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus 7f]) [ 9.560004] acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 9.673023] PCI host bridge to bus 0000:7f [ 9.722002] pci_bus 0000:7f: root bus resource [bus 7f] [ 9.784013] pci 0000:7f:00.0: [8086:344c] type 00 class 0x088000 [ 9.856096] pci 0000:7f:00.1: [8086:344c] type 00 class 0x088000 [ 9.928095] pci 0000:7f:00.2: [8086:344c] type 00 class 0x088000 [ 10.001110] pci 0000:7f:00.3: [8086:344c] type 00 class 0x088000 [ 10.073103] pci 0000:7f:00.4: [8086:344c] type 00 class 0x088000 [ 10.145090] pci 0000:7f:00.5: [8086:344c] type 00 class 0x088000 [ 10.217112] pci 0000:7f:00.6: [8086:344c] type 00 class 0x088000 [ 10.289114] pci 0000:7f:00.7: [8086:344c] type 00 class 0x088000 [ 10.361078] pci 0000:7f:01.0: [8086:344c] type 00 class 0x088000 [ 10.433123] pci 0000:7f:01.1: [8086:344c] type 00 class 0x088000 [ 10.505120] pci 0000:7f:01.2: [8086:344c] type 00 class 0x088000 [ 10.577074] pci 0000:7f:01.3: [8086:344c] type 00 class 0x088000 [ 10.649129] pci 0000:7f:01.4: [8086:344c] type 00 class 0x088000 [ 10.722133] pci 0000:7f:01.5: [8086:344c] type 00 class 0x088000 [ 10.794132] pci 0000:7f:01.6: [8086:344c] type 00 class 0x088000 [ 10.866118] pci 0000:7f:01.7: [8086:344c] type 00 class 0x088000 [ 10.938116] pci 0000:7f:02.0: [8086:344c] type 00 class 0x088000 [ 11.010123] pci 0000:7f:02.1: [8086:344c] type 00 class 0x088000 [ 11.082131] pci 0000:7f:02.2: [8086:344c] type 00 class 0x088000 [ 11.154128] pci 0000:7f:02.3: [8086:344c] type 00 class 0x088000 [ 11.227129] pci 0000:7f:02.4: [8086:344c] type 00 class 0x088000 [ 11.299136] pci 0000:7f:02.5: [8086:344c] type 00 class 0x088000 [ 11.371133] pci 0000:7f:02.6: [8086:344c] type 00 class 0x088000 [ 11.443145] pci 0000:7f:02.7: [8086:344c] type 00 class 0x088000 [ 11.515142] pci 0000:7f:03.0: [8086:344c] type 00 class 0x088000 [ 11.587143] pci 0000:7f:03.1: [8086:344c] type 00 class 0x088000 [ 11.659139] pci 0000:7f:03.2: [8086:344c] type 00 class 0x088000 [ 11.731144] pci 0000:7f:03.3: [8086:344c] type 00 class 0x088000 [ 11.804155] pci 0000:7f:03.4: [8086:344c] type 00 class 0x088000 [ 11.876090] pci 0000:7f:03.5: [8086:344c] type 00 class 0x088000 [ 11.948109] pci 0000:7f:03.6: [8086:344c] type 00 class 0x088000 [ 12.020086] pci 0000:7f:03.7: [8086:344c] type 00 class 0x088000 [ 12.092112] pci 0000:7f:04.0: [8086:344c] type 00 class 0x088000 [ 12.164082] pci 0000:7f:04.1: [8086:344c] type 00 class 0x088000 [ 12.236125] pci 0000:7f:04.2: [8086:344c] type 00 class 0x088000 [ 12.308126] pci 0000:7f:04.3: [8086:344c] type 00 class 0x088000 [ 12.381123] pci 0000:7f:04.4: [8086:344c] type 00 class 0x088000 [ 12.453132] pci 0000:7f:04.5: [8086:344c] type 00 class 0x088000 [ 12.525135] pci 0000:7f:04.6: [8086:344c] type 00 class 0x088000 [ 12.597150] pci 0000:7f:04.7: [8086:344c] type 00 class 0x088000 [ 12.669143] pci 0000:7f:0a.0: [8086:344d] type 00 class 0x088000 [ 12.741099] pci 0000:7f:0a.1: [8086:344d] type 00 class 0x088000 [ 12.813095] pci 0000:7f:0a.2: [8086:344d] type 00 class 0x088000 [ 12.885105] pci 0000:7f:0a.3: [8086:344d] type 00 class 0x088000 [ 12.958107] pci 0000:7f:0a.4: [8086:344d] type 00 class 0x088000 [ 13.030090] pci 0000:7f:0a.5: [8086:344d] type 00 class 0x088000 [ 13.102113] pci 0000:7f:0a.6: [8086:344d] type 00 class 0x088000 [ 13.174115] pci 0000:7f:0a.7: [8086:344d] type 00 class 0x088000 [ 13.246086] pci 0000:7f:0b.0: [8086:344d] type 00 class 0x088000 [ 13.318124] pci 0000:7f:0b.1: [8086:344d] type 00 class 0x088000 [ 13.390121] pci 0000:7f:0b.2: [8086:344d] type 00 class 0x088000 [ 13.462074] pci 0000:7f:0b.3: [8086:344d] type 00 class 0x088000 [ 13.534128] pci 0000:7f:0b.4: [8086:344d] type 00 class 0x088000 [ 13.607128] pci 0000:7f:0b.5: [8086:344d] type 00 class 0x088000 [ 13.679134] pci 0000:7f:0b.6: [8086:344d] type 00 class 0x088000 [ 13.751121] pci 0000:7f:0b.7: [8086:344d] type 00 class 0x088000 [ 13.823117] pci 0000:7f:0c.0: [8086:344d] type 00 class 0x088000 [ 13.895125] pci 0000:7f:0c.1: [8086:344d] type 00 class 0x088000 [ 13.967129] pci 0000:7f:0c.2: [8086:344d] type 00 class 0x088000 [ 14.039127] pci 0000:7f:0c.3: [8086:344d] type 00 class 0x088000 [ 14.111130] pci 0000:7f:0c.4: [8086:344d] type 00 class 0x088000 [ 14.184134] pci 0000:7f:0c.5: [8086:344d] type 00 class 0x088000 [ 14.256136] pci 0000:7f:0c.6: [8086:344d] type 00 class 0x088000 [ 14.328146] pci 0000:7f:0c.7: [8086:344d] type 00 class 0x088000 [ 14.400143] pci 0000:7f:0d.0: [8086:344d] type 00 class 0x088000 [ 14.472140] pci 0000:7f:0d.1: [8086:344d] type 00 class 0x088000 [ 14.544137] pci 0000:7f:0d.2: [8086:344d] type 00 class 0x088000 [ 14.616149] pci 0000:7f:0d.3: [8086:344d] type 00 class 0x088000 [ 14.689151] pci 0000:7f:0d.4: [8086:344d] type 00 class 0x088000 [ 14.761092] pci 0000:7f:0d.5: [8086:344d] type 00 class 0x088000 [ 14.833111] pci 0000:7f:0d.6: [8086:344d] type 00 class 0x088000 [ 14.905085] pci 0000:7f:0d.7: [8086:344d] type 00 class 0x088000 [ 14.977115] pci 0000:7f:0e.0: [8086:344d] type 00 class 0x088000 [ 15.049080] pci 0000:7f:0e.1: [8086:344d] type 00 class 0x088000 [ 15.121124] pci 0000:7f:0e.2: [8086:344d] type 00 class 0x088000 [ 15.193127] pci 0000:7f:0e.3: [8086:344d] type 00 class 0x088000 [ 15.265125] pci 0000:7f:0e.4: [8086:344d] type 00 class 0x088000 [ 15.337128] pci 0000:7f:0e.5: [8086:344d] type 00 class 0x088000 [ 15.410136] pci 0000:7f:0e.6: [8086:344d] type 00 class 0x088000 [ 15.482149] pci 0000:7f:0e.7: [8086:344d] type 00 class 0x088000 [ 15.554155] pci 0000:7f:1d.0: [8086:344f] type 00 class 0x088000 [ 15.626105] pci 0000:7f:1d.1: [8086:3457] type 00 class 0x088000 [ 15.698105] pci 0000:7f:1e.0: [8086:3458] type 00 class 0x088000 [ 15.770066] pci 0000:7f:1e.1: [8086:3459] type 00 class 0x088000 [ 15.842060] pci 0000:7f:1e.2: [8086:345a] type 00 class 0x088000 [ 15.914061] pci 0000:7f:1e.3: [8086:345b] type 00 class 0x088000 [ 15.986058] pci 0000:7f:1e.4: [8086:345c] type 00 class 0x088000 [ 16.059062] pci 0000:7f:1e.5: [8086:345d] type 00 class 0x088000 [ 16.131060] pci 0000:7f:1e.6: [8086:345e] type 00 class 0x088000 [ 16.203062] pci 0000:7f:1e.7: [8086:345f] type 00 class 0x088000 [ 16.275107] ACPI: PCI Root Bridge [UNC2] (domain 0000 [bus fe]) [ 16.346003] acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 16.458024] PCI host bridge to bus 0000:fe [ 16.508002] pci_bus 0000:fe: root bus resource [bus fe] [ 16.570007] pci 0000:fe:00.0: [8086:3450] type 00 class 0x088000 [ 16.642057] pci 0000:fe:00.1: [8086:3451] type 00 class 0x088000 [ 16.714058] pci 0000:fe:00.2: [8086:3452] type 00 class 0x088000 [ 16.786062] pci 0000:fe:00.3: [8086:0998] type 00 class 0x060000 [ 16.858058] pci 0000:fe:00.5: [8086:3455] type 00 class 0x088000 [ 16.930061] pci 0000:fe:02.0: [8086:3440] type 00 class 0x088000 [ 17.002114] pci 0000:fe:02.1: [8086:3441] type 00 class 0x088000 [ 17.075112] pci 0000:fe:02.2: [8086:3442] type 00 class 0x088000 [ 17.147109] pci 0000:fe:03.0: [8086:3440] type 00 class 0x088000 [ 17.219079] pci 0000:fe:03.1: [8086:3441] type 00 class 0x088000 [ 17.291078] pci 0000:fe:03.2: [8086:3442] type 00 class 0x088000 [ 17.363082] pci 0000:fe:04.0: [8086:3440] type 00 class 0x088000 [ 17.435122] pci 0000:fe:04.1: [8086:3441] type 00 class 0x088000 [ 17.507117] pci 0000:fe:04.2: [8086:3442] type 00 class 0x088000 [ 17.579120] pci 0000:fe:04.3: [8086:3443] type 00 class 0x088000 [ 17.651123] pci 0000:fe:05.0: [8086:3445] type 00 class 0x088000 [ 17.724113] pci 0000:fe:05.1: [8086:3446] type 00 class 0x088000 [ 17.796119] pci 0000:fe:05.2: [8086:3447] type 00 class 0x088000 [ 17.868112] pci 0000:fe:06.0: [8086:3445] type 00 class 0x088000 [ 17.940081] pci 0000:fe:06.1: [8086:3446] type 00 class 0x088000 [ 18.012081] pci 0000:fe:06.2: [8086:3447] type 00 class 0x088000 [ 18.084085] pci 0000:fe:07.0: [8086:3445] type 00 class 0x088000 [ 18.156122] pci 0000:fe:07.1: [8086:3446] type 00 class 0x088000 [ 18.228123] pci 0000:fe:07.2: [8086:3447] type 00 class 0x088000 [ 18.300120] pci 0000:fe:0b.0: [8086:3448] type 00 class 0x088000 [ 18.373064] pci 0000:fe:0b.1: [8086:3448] type 00 class 0x088000 [ 18.445063] pci 0000:fe:0b.2: [8086:344b] type 00 class 0x088000 [ 18.517068] pci 0000:fe:0c.0: [8086:344a] type 00 class 0x110100 [ 18.589090] pci 0000:fe:0d.0: [8086:344a] type 00 class 0x110100 [ 18.661087] pci 0000:fe:0e.0: [8086:344a] type 00 class 0x110100 [ 18.733151] pci 0000:fe:0f.0: [8086:344a] type 00 class 0x110100 [ 18.805161] pci 0000:fe:1a.0: [8086:2880] type 00 class 0x110100 [ 18.877091] pci 0000:fe:1b.0: [8086:2880] type 00 class 0x110100 [ 18.949082] pci 0000:fe:1c.0: [8086:2880] type 00 class 0x110100 [ 19.021153] pci 0000:fe:1d.0: [8086:2880] type 00 class 0x110100 [ 19.094180] ACPI: PCI Root Bridge [UNC3] (domain 0000 [bus ff]) [ 19.165003] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 19.277022] PCI host bridge to bus 0000:ff [ 19.326001] pci_bus 0000:ff: root bus resource [bus ff] [ 19.389012] pci 0000:ff:00.0: [8086:344c] type 00 class 0x088000 [ 19.461114] pci 0000:ff:00.1: [8086:344c] type 00 class 0x088000 [ 19.533111] pci 0000:ff:00.2: [8086:344c] type 00 class 0x088000 [ 19.605093] pci 0000:ff:00.3: [8086:344c] type 00 class 0x088000 [ 19.677119] pci 0000:ff:00.4: [8086:344c] type 00 class 0x088000 [ 19.750119] pci 0000:ff:00.5: [8086:344c] type 00 class 0x088000 [ 19.822092] pci 0000:ff:00.6: [8086:344c] type 00 class 0x088000 [ 19.894124] pci 0000:ff:00.7: [8086:344c] type 00 class 0x088000 [ 19.966117] pci 0000:ff:01.0: [8086:344c] type 00 class 0x088000 [ 20.038085] pci 0000:ff:01.1: [8086:344c] type 00 class 0x088000 [ 20.110129] pci 0000:ff:01.2: [8086:344c] type 00 class 0x088000 [ 20.182124] pci 0000:ff:01.3: [8086:344c] type 00 class 0x088000 [ 20.254081] pci 0000:ff:01.4: [8086:344c] type 00 class 0x088000 [ 20.326134] pci 0000:ff:01.5: [8086:344c] type 00 class 0x088000 [ 20.399136] pci 0000:ff:01.6: [8086:344c] type 00 class 0x088000 [ 20.471123] pci 0000:ff:01.7: [8086:344c] type 00 class 0x088000 [ 20.543130] pci 0000:ff:02.0: [8086:344c] type 00 class 0x088000 [ 20.615141] pci 0000:ff:02.1: [8086:344c] type 00 class 0x088000 [ 20.687128] pci 0000:ff:02.2: [8086:344c] type 00 class 0x088000 [ 20.759138] pci 0000:ff:02.3: [8086:344c] type 00 class 0x088000 [ 20.831136] pci 0000:ff:02.4: [8086:344c] type 00 class 0x088000 [ 20.904139] pci 0000:ff:02.5: [8086:344c] type 00 class 0x088000 [ 20.976140] pci 0000:ff:02.6: [8086:344c] type 00 class 0x088000 [ 21.048150] pci 0000:ff:02.7: [8086:344c] type 00 class 0x088000 [ 21.120145] pci 0000:ff:03.0: [8086:344c] type 00 class 0x088000 [ 21.192147] pci 0000:ff:03.1: [8086:344c] type 00 class 0x088000 [ 21.264155] pci 0000:ff:03.2: [8086:344c] type 00 class 0x088000 [ 21.336151] pci 0000:ff:03.3: [8086:344c] type 00 class 0x088000 [ 21.409148] pci 0000:ff:03.4: [8086:344c] type 00 class 0x088000 [ 21.481097] pci 0000:ff:03.5: [8086:344c] type 00 class 0x088000 [ 21.553100] pci 0000:ff:03.6: [8086:344c] type 00 class 0x088000 [ 21.625094] pci 0000:ff:03.7: [8086:344c] type 00 class 0x088000 [ 21.697084] pci 0000:ff:04.0: [8086:344c] type 00 class 0x088000 [ 21.769143] pci 0000:ff:04.1: [8086:344c] type 00 class 0x088000 [ 21.841123] pci 0000:ff:04.2: [8086:344c] type 00 class 0x088000 [ 21.913129] pci 0000:ff:04.3: [8086:344c] type 00 class 0x088000 [ 21.985137] pci 0000:ff:04.4: [8086:344c] type 00 class 0x088000 [ 22.058133] pci 0000:ff:04.5: [8086:344c] type 00 class 0x088000 [ 22.130143] pci 0000:ff:04.6: [8086:344c] type 00 class 0x088000 [ 22.202148] pci 0000:ff:04.7: [8086:344c] type 00 class 0x088000 [ 22.274164] pci 0000:ff:0a.0: [8086:344d] type 00 class 0x088000 [ 22.346112] pci 0000:ff:0a.1: [8086:344d] type 00 class 0x088000 [ 22.418111] pci 0000:ff:0a.2: [8086:344d] type 00 class 0x088000 [ 22.490097] pci 0000:ff:0a.3: [8086:344d] type 00 class 0x088000 [ 22.563121] pci 0000:ff:0a.4: [8086:344d] type 00 class 0x088000 [ 22.635114] pci 0000:ff:0a.5: [8086:344d] type 00 class 0x088000 [ 22.707092] pci 0000:ff:0a.6: [8086:344d] type 00 class 0x088000 [ 22.779127] pci 0000:ff:0a.7: [8086:344d] type 00 class 0x088000 [ 22.851121] pci 0000:ff:0b.0: [8086:344d] type 00 class 0x088000 [ 22.923085] pci 0000:ff:0b.1: [8086:344d] type 00 class 0x088000 [ 22.995128] pci 0000:ff:0b.2: [8086:344d] type 00 class 0x088000 [ 23.067126] pci 0000:ff:0b.3: [8086:344d] type 00 class 0x088000 [ 23.140079] pci 0000:ff:0b.4: [8086:344d] type 00 class 0x088000 [ 23.212134] pci 0000:ff:0b.5: [8086:344d] type 00 class 0x088000 [ 23.284135] pci 0000:ff:0b.6: [8086:344d] type 00 class 0x088000 [ 23.356123] pci 0000:ff:0b.7: [8086:344d] type 00 class 0x088000 [ 23.428131] pci 0000:ff:0c.0: [8086:344d] type 00 class 0x088000 [ 23.500133] pci 0000:ff:0c.1: [8086:344d] type 00 class 0x088000 [ 23.572128] pci 0000:ff:0c.2: [8086:344d] type 00 class 0x088000 [ 23.644136] pci 0000:ff:0c.3: [8086:344d] type 00 class 0x088000 [ 23.717138] pci 0000:ff:0c.4: [8086:344d] type 00 class 0x088000 [ 23.789143] pci 0000:ff:0c.5: [8086:344d] type 00 class 0x088000 [ 23.861141] pci 0000:ff:0c.6: [8086:344d] type 00 class 0x088000 [ 23.933149] pci 0000:ff:0c.7: [8086:344d] type 00 class 0x088000 [ 24.005144] pci 0000:ff:0d.0: [8086:344d] type 00 class 0x088000 [ 24.077144] pci 0000:ff:0d.1: [8086:344d] type 00 class 0x088000 [ 24.149156] pci 0000:ff:0d.2: [8086:344d] type 00 class 0x088000 [ 24.222153] pci 0000:ff:0d.3: [8086:344d] type 00 class 0x088000 [ 24.294145] pci 0000:ff:0d.4: [8086:344d] type 00 class 0x088000 [ 24.366099] pci 0000:ff:0d.5: [8086:344d] type 00 class 0x088000 [ 24.438099] pci 0000:ff:0d.6: [8086:344d] type 00 class 0x088000 [ 24.510092] pci 0000:ff:0d.7: [8086:344d] type 00 class 0x088000 [ 24.582087] pci 0000:ff:0e.0: [8086:344d] type 00 class 0x088000 [ 24.654139] pci 0000:ff:0e.1: [8086:344d] type 00 class 0x088000 [ 24.726125] pci 0000:ff:0e.2: [8086:344d] type 00 class 0x088000 [ 24.799135] pci 0000:ff:0e.3: [8086:344d] type 00 class 0x088000 [ 24.871136] pci 0000:ff:0e.4: [8086:344d] type 00 class 0x088000 [ 24.943136] pci 0000:ff:0e.5: [8086:344d] type 00 class 0x088000 [ 25.015142] pci 0000:ff:0e.6: [8086:344d] type 00 class 0x088000 [ 25.087150] pci 0000:ff:0e.7: [8086:344d] type 00 class 0x088000 [ 25.159175] pci 0000:ff:1d.0: [8086:344f] type 00 class 0x088000 [ 25.231119] pci 0000:ff:1d.1: [8086:3457] type 00 class 0x088000 [ 25.304124] pci 0000:ff:1e.0: [8086:3458] type 00 class 0x088000 [ 25.376067] pci 0000:ff:1e.1: [8086:3459] type 00 class 0x088000 [ 25.448065] pci 0000:ff:1e.2: [8086:345a] type 00 class 0x088000 [ 25.520064] pci 0000:ff:1e.3: [8086:345b] type 00 class 0x088000 [ 25.592062] pci 0000:ff:1e.4: [8086:345c] type 00 class 0x088000 [ 25.664065] pci 0000:ff:1e.5: [8086:345d] type 00 class 0x088000 [ 25.736062] pci 0000:ff:1e.6: [8086:345e] type 00 class 0x088000 [ 25.808067] pci 0000:ff:1e.7: [8086:345f] type 00 class 0x088000 [ 25.882810] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-0d]) [ 25.957007] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 26.070077] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 26.165065] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 26.257002] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 26.355430] PCI host bridge to bus 0000:00 [ 26.404002] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 26.486002] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 26.567002] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window] [ 26.648002] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window] [ 26.730008] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 26.820002] pci_bus 0000:00: root bus resource [io 0x1000-0x4fff window] [ 26.901002] pci_bus 0000:00: root bus resource [mem 0x90000000-0xa47fbfff window] [ 26.991002] pci_bus 0000:00: root bus resource [mem 0x200000000000-0x20ffffffffff window] [ 27.089002] pci_bus 0000:00: root bus resource [bus 00-0d] [ 27.155009] pci 0000:00:00.0: [8086:09a2] type 00 class 0x088000 [ 27.227127] pci 0000:00:00.1: [8086:09a4] type 00 class 0x088000 [ 27.299102] pci 0000:00:00.2: [8086:09a3] type 00 class 0x088000 [ 27.371100] pci 0000:00:00.4: [8086:0998] type 00 class 0x060000 [ 27.443100] pci 0000:00:01.0: [8086:0b00] type 00 class 0x088000 [ 27.515013] pci 0000:00:01.0: reg 0x10: [mem 0x20fffff40000-0x20fffff43fff 64bit] [ 27.605105] pci 0000:00:01.1: [8086:0b00] type 00 class 0x088000 [ 27.677013] pci 0000:00:01.1: reg 0x10: [mem 0x20fffff3c000-0x20fffff3ffff 64bit] [ 27.767106] pci 0000:00:01.2: [8086:0b00] type 00 class 0x088000 [ 27.839012] pci 0000:00:01.2: reg 0x10: [mem 0x20fffff38000-0x20fffff3bfff 64bit] [ 27.928099] pci 0000:00:01.3: [8086:0b00] type 00 class 0x088000 [ 28.001012] pci 0000:00:01.3: reg 0x10: [mem 0x20fffff34000-0x20fffff37fff 64bit] [ 28.090101] pci 0000:00:01.4: [8086:0b00] type 00 class 0x088000 [ 28.162012] pci 0000:00:01.4: reg 0x10: [mem 0x20fffff30000-0x20fffff33fff 64bit] [ 28.252106] pci 0000:00:01.5: [8086:0b00] type 00 class 0x088000 [ 28.324012] pci 0000:00:01.5: reg 0x10: [mem 0x20fffff2c000-0x20fffff2ffff 64bit] [ 28.414101] pci 0000:00:01.6: [8086:0b00] type 00 class 0x088000 [ 28.486012] pci 0000:00:01.6: reg 0x10: [mem 0x20fffff28000-0x20fffff2bfff 64bit] [ 28.576103] pci 0000:00:01.7: [8086:0b00] type 00 class 0x088000 [ 28.648012] pci 0000:00:01.7: reg 0x10: [mem 0x20fffff24000-0x20fffff27fff 64bit] [ 28.738105] pci 0000:00:02.0: [8086:09a6] type 00 class 0x088000 [ 28.810010] pci 0000:00:02.0: reg 0x10: [mem 0x99ed4000-0x99ed5fff] [ 28.885095] pci 0000:00:02.1: [8086:09a7] type 00 class 0x088000 [ 28.957010] pci 0000:00:02.1: reg 0x10: [mem 0x99e00000-0x99e7ffff] [ 29.032006] pci 0000:00:02.1: reg 0x14: [mem 0x99d80000-0x99dfffff] [ 29.107088] pci 0000:00:02.4: [8086:3456] type 00 class 0x130000 [ 29.179011] pci 0000:00:02.4: reg 0x10: [mem 0x20ffffe00000-0x20ffffefffff 64bit] [ 29.269007] pci 0000:00:02.4: reg 0x18: [mem 0x20fffff20000-0x20fffff23fff 64bit] [ 29.359007] pci 0000:00:02.4: reg 0x20: [mem 0x20fffff00000-0x20fffff1ffff 64bit] [ 29.449095] pci 0000:00:11.0: [8086:a1ec] type 00 class 0xff0000 [ 29.521133] pci 0000:00:14.0: [8086:a1af] type 00 class 0x0c0330 [ 29.593025] pci 0000:00:14.0: reg 0x10: [mem 0x99ec0000-0x99ecffff 64bit] [ 29.674067] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 29.744106] pci 0000:00:14.2: [8086:a1b1] type 00 class 0x118000 [ 29.816022] pci 0000:00:14.2: reg 0x10: [mem 0x20fffff47000-0x20fffff47fff 64bit] [ 29.906145] pci 0000:00:1c.0: [8086:a190] type 01 class 0x060400 [ 29.978077] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 30.051111] pci 0000:00:1c.2: [8086:a192] type 01 class 0x060400 [ 30.124076] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 30.197088] pci 0000:00:1c.3: [8086:a193] type 01 class 0x060400 [ 30.269075] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 30.342087] pci 0000:00:1c.4: [8086:a194] type 01 class 0x060400 [ 30.414072] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 30.487103] pci 0000:00:1c.5: [8086:a195] type 01 class 0x060400 [ 30.559072] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 30.632087] pci 0000:00:1f.0: [8086:a1cb] type 00 class 0x060100 [ 30.704147] pci 0000:00:1f.2: [8086:a1a1] type 00 class 0x058000 [ 30.777016] pci 0000:00:1f.2: reg 0x10: [mem 0x99ed0000-0x99ed3fff] [ 30.852117] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 30.911038] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 30.971035] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 31.030046] pci 0000:01:00.0: [103c:3306] type 00 class 0x088000 [ 31.102023] pci 0000:01:00.0: reg 0x10: [io 0x1200-0x12ff] [ 31.169011] pci 0000:01:00.0: reg 0x14: [mem 0x99b9e000-0x99b9e3ff] [ 31.244011] pci 0000:01:00.0: reg 0x18: [io 0x1100-0x11ff] [ 31.311011] pci 0000:01:00.0: reg 0x1c: [mem 0x94000000-0x97ffffff] [ 31.386011] pci 0000:01:00.0: reg 0x20: [mem 0x99800000-0x999fffff] [ 31.461139] pci 0000:01:00.1: [102b:0538] type 00 class 0x030000 [ 31.534023] pci 0000:01:00.1: reg 0x10: [mem 0x98000000-0x98ffffff pref] [ 31.614011] pci 0000:01:00.1: reg 0x14: [mem 0x99b98000-0x99b9bfff] [ 31.689011] pci 0000:01:00.1: reg 0x18: [mem 0x99000000-0x997fffff] [ 31.764046] pci 0000:01:00.1: BAR 0: assigned to efifb [ 31.826006] pci 0000:01:00.1: efifb_fixup_resources+0x0/0x130 took 60546 usecs [ 31.912099] pci 0000:01:00.2: [103c:3307] type 00 class 0x088000 [ 31.985023] pci 0000:01:00.2: reg 0x10: [io 0x1000-0x10ff] [ 32.051011] pci 0000:01:00.2: reg 0x14: [mem 0x99b9d000-0x99b9d0ff] [ 32.127011] pci 0000:01:00.2: reg 0x18: [mem 0x99a00000-0x99afffff] [ 32.202010] pci 0000:01:00.2: reg 0x1c: [mem 0x99b00000-0x99b7ffff] [ 32.277011] pci 0000:01:00.2: reg 0x20: [mem 0x99b90000-0x99b97fff] [ 32.352011] pci 0000:01:00.2: reg 0x24: [mem 0x99b80000-0x99b8ffff] [ 32.427011] pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 32.507054] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 32.581072] pci 0000:01:00.4: [103c:22f6] type 00 class 0x0c0320 [ 32.653024] pci 0000:01:00.4: reg 0x10: [mem 0x99b9c000-0x99b9c0ff] [ 32.728163] pci 0000:00:1c.4: PCI bridge to [bus 01] [ 32.787003] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] [ 32.861004] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x99bfffff] [ 32.942044] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 33.001221] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.084037] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 33.167034] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.249032] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.332032] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.414034] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.496033] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.579034] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 33.661165] ACPI: PCI Root Bridge [PC01] (domain 0000 [bus 0e-29]) [ 33.736007] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 33.848088] acpi PNP0A08:01: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 33.943062] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 34.035002] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration [ 34.133053] PCI host bridge to bus 0000:0e [ 34.182002] pci_bus 0000:0e: root bus resource [io 0x5000-0x6fff window] [ 34.264003] pci_bus 0000:0e: root bus resource [mem 0xa4800000-0xae3fbfff window] [ 34.354002] pci_bus 0000:0e: root bus resource [mem 0x210000000000-0x21ffffffffff window] [ 34.452003] pci_bus 0000:0e: root bus resource [bus 0e-29] [ 34.517009] pci 0000:0e:00.0: [8086:09a2] type 00 class 0x088000 [ 34.589072] pci 0000:0e:00.1: [8086:09a4] type 00 class 0x088000 [ 34.662068] pci 0000:0e:00.2: [8086:09a3] type 00 class 0x088000 [ 34.734070] pci 0000:0e:00.4: [8086:0998] type 00 class 0x060000 [ 34.806067] pci 0000:0e:02.0: [8086:347a] type 01 class 0x060400 [ 34.878015] pci 0000:0e:02.0: reg 0x10: [mem 0x21fffff00000-0x21fffff1ffff 64bit] [ 34.967037] pci 0000:0e:02.0: PME# supported from D0 D3hot D3cold [ 35.041186] pci 0000:0f:00.0: [1000:10e2] type 00 class 0x010400 [ 35.113021] pci 0000:0f:00.0: reg 0x10: [mem 0xa4800000-0xa48fffff 64bit pref] [ 35.199009] pci 0000:0f:00.0: reg 0x18: [mem 0xa4900000-0xa49fffff 64bit pref] [ 35.286007] pci 0000:0f:00.0: reg 0x20: [mem 0xa4a00000-0xa4afffff] [ 35.361007] pci 0000:0f:00.0: reg 0x24: [io 0x5000-0x50ff] [ 35.428007] pci 0000:0f:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref] [ 35.508049] pci 0000:0f:00.0: supports D1 D2 [ 35.559084] pci 0000:0e:02.0: PCI bridge to [bus 0f] [ 35.619003] pci 0000:0e:02.0: bridge window [io 0x5000-0x5fff] [ 35.692003] pci 0000:0e:02.0: bridge window [mem 0xa4a00000-0xa4afffff] [ 35.774005] pci 0000:0e:02.0: bridge window [mem 0xa4800000-0xa49fffff 64bit pref] [ 35.866045] ACPI: PCI Root Bridge [PC02] (domain 0000 [bus 2a-45]) [ 35.941007] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 36.053070] acpi PNP0A08:02: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 36.148061] acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 36.240002] acpi PNP0A08:02: FADT indicates ASPM is unsupported, using BIOS configuration [ 36.338047] PCI host bridge to bus 0000:2a [ 36.387002] pci_bus 0000:2a: root bus resource [io 0x7000-0x8fff window] [ 36.469002] pci_bus 0000:2a: root bus resource [mem 0xae400000-0xb7ffbfff window] [ 36.558002] pci_bus 0000:2a: root bus resource [mem 0x220000000000-0x22ffffffffff window] [ 36.657002] pci_bus 0000:2a: root bus resource [bus 2a-45] [ 36.722009] pci 0000:2a:00.0: [8086:09a2] type 00 class 0x088000 [ 36.794048] pci 0000:2a:00.1: [8086:09a4] type 00 class 0x088000 [ 36.866067] pci 0000:2a:00.2: [8086:09a3] type 00 class 0x088000 [ 36.938066] pci 0000:2a:00.4: [8086:0998] type 00 class 0x060000 [ 37.011064] pci 0000:2a:02.0: [8086:347a] type 01 class 0x060400 [ 37.083015] pci 0000:2a:02.0: reg 0x10: [mem 0x22fffff00000-0x22fffff1ffff 64bit] [ 37.172013] pci 0000:2a:02.0: enabling Extended Tags [ 37.232028] pci 0000:2a:02.0: PME# supported from D0 D3hot D3cold [ 37.305096] pci 0000:2a:02.0: PCI bridge to [bus 2b] [ 37.364035] ACPI: PCI Root Bridge [PC04] (domain 0000 [bus 46-61]) [ 37.439006] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 37.551067] acpi PNP0A08:03: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 37.646060] acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 37.738002] acpi PNP0A08:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 37.836051] PCI host bridge to bus 0000:46 [ 37.885002] pci_bus 0000:46: root bus resource [io 0x9000-0xafff window] [ 37.967002] pci_bus 0000:46: root bus resource [mem 0xb8000000-0xc1bfbfff window] [ 38.057002] pci_bus 0000:46: root bus resource [mem 0x230000000000-0x23ffffffffff window] [ 38.155003] pci_bus 0000:46: root bus resource [bus 46-61] [ 38.220008] pci 0000:46:00.0: [8086:09a2] type 00 class 0x088000 [ 38.292067] pci 0000:46:00.1: [8086:09a4] type 00 class 0x088000 [ 38.364066] pci 0000:46:00.2: [8086:09a3] type 00 class 0x088000 [ 38.437063] pci 0000:46:00.4: [8086:0998] type 00 class 0x060000 [ 38.509067] pci 0000:46:02.0: [8086:347a] type 01 class 0x060400 [ 38.581016] pci 0000:46:02.0: reg 0x10: [mem 0x23fffff20000-0x23fffff3ffff 64bit] [ 38.670013] pci 0000:46:02.0: enabling Extended Tags [ 38.730027] pci 0000:46:02.0: PME# supported from D0 D3hot D3cold [ 38.803074] pci 0000:46:04.0: [8086:347c] type 01 class 0x060400 [ 38.875014] pci 0000:46:04.0: reg 0x10: [mem 0x23fffff00000-0x23fffff1ffff 64bit] [ 38.965038] pci 0000:46:04.0: PME# supported from D0 D3hot D3cold [ 39.038118] pci 0000:46:02.0: PCI bridge to [bus 47] [ 39.098074] pci 0000:48:00.0: [1077:8070] type 00 class 0x020000 [ 39.170025] pci 0000:48:00.0: reg 0x10: [mem 0xb9020000-0xb903ffff 64bit pref] [ 39.256010] pci 0000:48:00.0: reg 0x18: [mem 0xb8800000-0xb8ffffff 64bit pref] [ 39.343010] pci 0000:48:00.0: reg 0x20: [mem 0xb9050000-0xb905ffff 64bit pref] [ 39.429007] pci 0000:48:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 39.510055] pci 0000:48:00.0: PME# supported from D0 D3hot D3cold [ 39.583048] pci 0000:48:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:46:04.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link) [ 39.763055] pci 0000:48:00.1: [1077:8070] type 00 class 0x020000 [ 39.836023] pci 0000:48:00.1: reg 0x10: [mem 0xb9000000-0xb901ffff 64bit pref] [ 39.922010] pci 0000:48:00.1: reg 0x18: [mem 0xb8000000-0xb87fffff 64bit pref] [ 40.009010] pci 0000:48:00.1: reg 0x20: [mem 0xb9040000-0xb904ffff 64bit pref] [ 40.095007] pci 0000:48:00.1: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 40.176053] pci 0000:48:00.1: PME# supported from D0 D3hot D3cold [ 40.249086] pci 0000:46:04.0: PCI bridge to [bus 48] [ 40.308005] pci 0000:46:04.0: bridge window [mem 0xb8000000-0xb90fffff 64bit pref] [ 40.401042] ACPI: PCI Root Bridge [PC05] (domain 0000 [bus 62-7d]) [ 40.475006] acpi PNP0A08:04: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 40.588066] acpi PNP0A08:04: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 40.683060] acpi PNP0A08:04: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 40.775002] acpi PNP0A08:04: FADT indicates ASPM is unsupported, using BIOS configuration [ 40.873049] PCI host bridge to bus 0000:62 [ 40.922002] pci_bus 0000:62: root bus resource [io 0xb000-0xbfff window] [ 41.004002] pci_bus 0000:62: root bus resource [mem 0xc1c00000-0xcaffbfff window] [ 41.093002] pci_bus 0000:62: root bus resource [mem 0x240000000000-0x24ffffffffff window] [ 41.191002] pci_bus 0000:62: root bus resource [bus 62-7d] [ 41.257008] pci 0000:62:00.0: [8086:09a2] type 00 class 0x088000 [ 41.329069] pci 0000:62:00.1: [8086:09a4] type 00 class 0x088000 [ 41.401065] pci 0000:62:00.2: [8086:09a3] type 00 class 0x088000 [ 41.473068] pci 0000:62:00.4: [8086:0998] type 00 class 0x060000 [ 41.545065] pci 0000:62:02.0: [8086:347a] type 01 class 0x060400 [ 41.618015] pci 0000:62:02.0: reg 0x10: [mem 0x24fffff60000-0x24fffff7ffff 64bit] [ 41.707013] pci 0000:62:02.0: enabling Extended Tags [ 41.767033] pci 0000:62:02.0: PME# supported from D0 D3hot D3cold [ 41.840061] pci 0000:62:03.0: [8086:347b] type 01 class 0x060400 [ 41.912015] pci 0000:62:03.0: reg 0x10: [mem 0x24fffff40000-0x24fffff5ffff 64bit] [ 42.002013] pci 0000:62:03.0: enabling Extended Tags [ 42.061032] pci 0000:62:03.0: PME# supported from D0 D3hot D3cold [ 42.134057] pci 0000:62:04.0: [8086:347c] type 01 class 0x060400 [ 42.206014] pci 0000:62:04.0: reg 0x10: [mem 0x24fffff20000-0x24fffff3ffff 64bit] [ 42.296013] pci 0000:62:04.0: enabling Extended Tags [ 42.356032] pci 0000:62:04.0: PME# supported from D0 D3hot D3cold [ 42.429056] pci 0000:62:05.0: [8086:347d] type 01 class 0x060400 [ 42.501014] pci 0000:62:05.0: reg 0x10: [mem 0x24fffff00000-0x24fffff1ffff 64bit] [ 42.590014] pci 0000:62:05.0: enabling Extended Tags [ 42.650031] pci 0000:62:05.0: PME# supported from D0 D3hot D3cold [ 42.723086] pci 0000:62:02.0: PCI bridge to [bus 63] [ 42.783024] pci 0000:62:03.0: PCI bridge to [bus 64] [ 42.842026] pci 0000:62:04.0: PCI bridge to [bus 65] [ 42.902024] pci 0000:62:05.0: PCI bridge to [bus 66] [ 42.961044] ACPI: PCI Root Bridge [PC06] (domain 0000 [bus 80-82]) [ 43.035007] acpi PNP0A08:05: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 43.148066] acpi PNP0A08:05: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 43.243060] acpi PNP0A08:05: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 43.335002] acpi PNP0A08:05: FADT indicates ASPM is unsupported, using BIOS configuration [ 43.433033] PCI host bridge to bus 0000:80 [ 43.482002] pci_bus 0000:80: root bus resource [mem 0xcb800000-0xd4ffbfff window] [ 43.572002] pci_bus 0000:80: root bus resource [mem 0x250000000000-0x25ffffffffff window] [ 43.670003] pci_bus 0000:80: root bus resource [bus 80-82] [ 43.736008] pci 0000:80:00.0: [8086:09a2] type 00 class 0x088000 [ 43.808047] pci 0000:80:00.1: [8086:09a4] type 00 class 0x088000 [ 43.880069] pci 0000:80:00.2: [8086:09a3] type 00 class 0x088000 [ 43.952072] pci 0000:80:00.4: [8086:0998] type 00 class 0x060000 [ 44.024071] pci 0000:80:01.0: [8086:0b00] type 00 class 0x088000 [ 44.096015] pci 0000:80:01.0: reg 0x10: [mem 0x25fffff40000-0x25fffff43fff 64bit] [ 44.186074] pci 0000:80:01.1: [8086:0b00] type 00 class 0x088000 [ 44.258013] pci 0000:80:01.1: reg 0x10: [mem 0x25fffff3c000-0x25fffff3ffff 64bit] [ 44.347074] pci 0000:80:01.2: [8086:0b00] type 00 class 0x088000 [ 44.420013] pci 0000:80:01.2: reg 0x10: [mem 0x25fffff38000-0x25fffff3bfff 64bit] [ 44.509076] pci 0000:80:01.3: [8086:0b00] type 00 class 0x088000 [ 44.581014] pci 0000:80:01.3: reg 0x10: [mem 0x25fffff34000-0x25fffff37fff 64bit] [ 44.671073] pci 0000:80:01.4: [8086:0b00] type 00 class 0x088000 [ 44.743013] pci 0000:80:01.4: reg 0x10: [mem 0x25fffff30000-0x25fffff33fff 64bit] [ 44.833053] pci 0000:80:01.5: [8086:0b00] type 00 class 0x088000 [ 44.905014] pci 0000:80:01.5: reg 0x10: [mem 0x25fffff2c000-0x25fffff2ffff 64bit] [ 44.995075] pci 0000:80:01.6: [8086:0b00] type 00 class 0x088000 [ 45.067013] pci 0000:80:01.6: reg 0x10: [mem 0x25fffff28000-0x25fffff2bfff 64bit] [ 45.157072] pci 0000:80:01.7: [8086:0b00] type 00 class 0x088000 [ 45.229013] pci 0000:80:01.7: reg 0x10: [mem 0x25fffff24000-0x25fffff27fff 64bit] [ 45.318072] pci 0000:80:02.0: [8086:09a6] type 00 class 0x088000 [ 45.391011] pci 0000:80:02.0: reg 0x10: [mem 0xcb980000-0xcb981fff] [ 45.466060] pci 0000:80:02.1: [8086:09a7] type 00 class 0x088000 [ 45.538011] pci 0000:80:02.1: reg 0x10: [mem 0xcb900000-0xcb97ffff] [ 45.613006] pci 0000:80:02.1: reg 0x14: [mem 0xcb880000-0xcb8fffff] [ 45.688056] pci 0000:80:02.4: [8086:3456] type 00 class 0x130000 [ 45.760012] pci 0000:80:02.4: reg 0x10: [mem 0x25ffffe00000-0x25ffffefffff 64bit] [ 45.850007] pci 0000:80:02.4: reg 0x18: [mem 0x25fffff20000-0x25fffff23fff 64bit] [ 45.940007] pci 0000:80:02.4: reg 0x20: [mem 0x25fffff00000-0x25fffff1ffff 64bit] [ 46.029077] ACPI: PCI Root Bridge [PC07] (domain 0000 [bus 83-a0]) [ 46.104006] acpi PNP0A08:06: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 46.216067] acpi PNP0A08:06: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 46.311060] acpi PNP0A08:06: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 46.403002] acpi PNP0A08:06: FADT indicates ASPM is unsupported, using BIOS configuration [ 46.501031] PCI host bridge to bus 0000:83 [ 46.550002] pci_bus 0000:83: root bus resource [io 0xc000-0xcfff window] [ 46.632006] pci_bus 0000:83: root bus resource [mem 0xd5000000-0xdebfbfff window] [ 46.721002] pci_bus 0000:83: root bus resource [mem 0x260000000000-0x26ffffffffff window] [ 46.820003] pci_bus 0000:83: root bus resource [bus 83-a0] [ 46.885008] pci 0000:83:00.0: [8086:09a2] type 00 class 0x088000 [ 46.957071] pci 0000:83:00.1: [8086:09a4] type 00 class 0x088000 [ 47.029068] pci 0000:83:00.2: [8086:09a3] type 00 class 0x088000 [ 47.101066] pci 0000:83:00.4: [8086:0998] type 00 class 0x060000 [ 47.174073] pci 0000:83:02.0: [8086:347a] type 01 class 0x060400 [ 47.246016] pci 0000:83:02.0: reg 0x10: [mem 0x26fffff00000-0x26fffff1ffff 64bit] [ 47.335014] pci 0000:83:02.0: enabling Extended Tags [ 47.395035] pci 0000:83:02.0: PME# supported from D0 D3hot D3cold [ 47.468089] pci 0000:83:02.0: PCI bridge to [bus 84] [ 47.528032] ACPI: PCI Root Bridge [PC08] (domain 0000 [bus a1-be]) [ 47.602010] acpi PNP0A08:07: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 47.714068] acpi PNP0A08:07: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 47.809060] acpi PNP0A08:07: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 47.901002] acpi PNP0A08:07: FADT indicates ASPM is unsupported, using BIOS configuration [ 47.999032] PCI host bridge to bus 0000:a1 [ 48.048002] pci_bus 0000:a1: root bus resource [io 0xd000-0xdfff window] [ 48.130002] pci_bus 0000:a1: root bus resource [mem 0xdec00000-0xe87fbfff window] [ 48.220002] pci_bus 0000:a1: root bus resource [mem 0x270000000000-0x27ffffffffff window] [ 48.318003] pci_bus 0000:a1: root bus resource [bus a1-be] [ 48.383008] pci 0000:a1:00.0: [8086:09a2] type 00 class 0x088000 [ 48.455071] pci 0000:a1:00.1: [8086:09a4] type 00 class 0x088000 [ 48.527065] pci 0000:a1:00.2: [8086:09a3] type 00 class 0x088000 [ 48.600073] pci 0000:a1:00.4: [8086:0998] type 00 class 0x060000 [ 48.672070] pci 0000:a1:02.0: [8086:347a] type 01 class 0x060400 [ 48.744016] pci 0000:a1:02.0: reg 0x10: [mem 0x27fffff00000-0x27fffff1ffff 64bit] [ 48.833014] pci 0000:a1:02.0: enabling Extended Tags [ 48.893032] pci 0000:a1:02.0: PME# supported from D0 D3hot D3cold [ 48.966089] pci 0000:a1:02.0: PCI bridge to [bus a2] [ 49.026030] ACPI: PCI Root Bridge [PC10] (domain 0000 [bus bf-dc]) [ 49.100006] acpi PNP0A08:08: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 49.212065] acpi PNP0A08:08: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 49.307060] acpi PNP0A08:08: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 49.399002] acpi PNP0A08:08: FADT indicates ASPM is unsupported, using BIOS configuration [ 49.497045] PCI host bridge to bus 0000:bf [ 49.546002] pci_bus 0000:bf: root bus resource [io 0xe000-0xefff window] [ 49.628006] pci_bus 0000:bf: root bus resource [mem 0xe8800000-0xf23fbfff window] [ 49.718002] pci_bus 0000:bf: root bus resource [mem 0x280000000000-0x28ffffffffff window] [ 49.816002] pci_bus 0000:bf: root bus resource [bus bf-dc] [ 49.881008] pci 0000:bf:00.0: [8086:09a2] type 00 class 0x088000 [ 49.953072] pci 0000:bf:00.1: [8086:09a4] type 00 class 0x088000 [ 50.026071] pci 0000:bf:00.2: [8086:09a3] type 00 class 0x088000 [ 50.098071] pci 0000:bf:00.4: [8086:0998] type 00 class 0x060000 [ 50.170074] pci 0000:bf:02.0: [8086:347a] type 01 class 0x060400 [ 50.242016] pci 0000:bf:02.0: reg 0x10: [mem 0x28fffff00000-0x28fffff1ffff 64bit] [ 50.332013] pci 0000:bf:02.0: enabling Extended Tags [ 50.391032] pci 0000:bf:02.0: PME# supported from D0 D3hot D3cold [ 50.464097] pci 0000:bf:02.0: PCI bridge to [bus c0] [ 50.524032] ACPI: PCI Root Bridge [PC11] (domain 0000 [bus dd-fa]) [ 50.598009] acpi PNP0A08:09: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 50.710064] acpi PNP0A08:09: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 50.806060] acpi PNP0A08:09: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 50.897002] acpi PNP0A08:09: FADT indicates ASPM is unsupported, using BIOS configuration [ 50.995045] PCI host bridge to bus 0000:dd [ 51.045001] pci_bus 0000:dd: root bus resource [io 0xf000-0xffff window] [ 51.126002] pci_bus 0000:dd: root bus resource [mem 0xf2400000-0xfb7fbfff window] [ 51.216002] pci_bus 0000:dd: root bus resource [mem 0x290000000000-0x29ffffffffff window] [ 51.314002] pci_bus 0000:dd: root bus resource [bus dd-fa] [ 51.380011] pci 0000:dd:00.0: [8086:09a2] type 00 class 0x088000 [ 51.452073] pci 0000:dd:00.1: [8086:09a4] type 00 class 0x088000 [ 51.524075] pci 0000:dd:00.2: [8086:09a3] type 00 class 0x088000 [ 51.596075] pci 0000:dd:00.4: [8086:0998] type 00 class 0x060000 [ 51.668075] pci 0000:dd:02.0: [8086:347a] type 01 class 0x060400 [ 51.740017] pci 0000:dd:02.0: reg 0x10: [mem 0x29fffff60000-0x29fffff7ffff 64bit] [ 51.830014] pci 0000:dd:02.0: enabling Extended Tags [ 51.889037] pci 0000:dd:02.0: PME# supported from D0 D3hot D3cold [ 51.962063] pci 0000:dd:03.0: [8086:347b] type 01 class 0x060400 [ 52.034016] pci 0000:dd:03.0: reg 0x10: [mem 0x29fffff40000-0x29fffff5ffff 64bit] [ 52.124014] pci 0000:dd:03.0: enabling Extended Tags [ 52.184037] pci 0000:dd:03.0: PME# supported from D0 D3hot D3cold [ 52.257061] pci 0000:dd:04.0: [8086:347c] type 01 class 0x060400 [ 52.329016] pci 0000:dd:04.0: reg 0x10: [mem 0x29fffff20000-0x29fffff3ffff 64bit] [ 52.418014] pci 0000:dd:04.0: enabling Extended Tags [ 52.478036] pci 0000:dd:04.0: PME# supported from D0 D3hot D3cold [ 52.551064] pci 0000:dd:05.0: [8086:347d] type 01 class 0x060400 [ 52.623017] pci 0000:dd:05.0: reg 0x10: [mem 0x29fffff00000-0x29fffff1ffff 64bit] [ 52.713015] pci 0000:dd:05.0: enabling Extended Tags [ 52.772037] pci 0000:dd:05.0: PME# supported from D0 D3hot D3cold [ 52.845095] pci 0000:dd:02.0: PCI bridge to [bus de] [ 52.905027] pci 0000:dd:03.0: PCI bridge to [bus df] [ 52.964028] pci 0000:dd:04.0: PCI bridge to [bus e0] [ 53.024026] pci 0000:dd:05.0: PCI bridge to [bus e1] [ 53.084468] iommu: Default domain type: Passthrough [ 53.144081] pci 0000:01:00.1: vgaarb: setting as boot VGA device [ 53.145000] pci 0000:01:00.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 53.318023] pci 0000:01:00.1: vgaarb: bridge control possible [ 53.387002] vgaarb: loaded [ 53.419101] SCSI subsystem initialized [ 53.464019] ACPI: bus type USB registered [ 53.512015] usbcore: registered new interface driver usbfs [ 53.578008] usbcore: registered new interface driver hub [ 53.642189] usbcore: registered new device driver usb [ 53.702020] pps_core: LinuxPPS API ver. 1 registered [ 53.762002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 53.871005] PTP clock support registered [ 53.919012] EDAC MC: Ver: 3.0.0 [ 53.957021] Registered efivars operations [ 54.006038] PCI: Using ACPI for IRQ routing [ 54.059720] Expanded resource Reserved due to conflict with PCI Bus 0000:01 [ 54.143295] NetLabel: Initializing [ 54.184001] NetLabel: domain hash size = 128 [ 54.236002] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 54.304013] NetLabel: unlabeled traffic allowed by default [ 54.372373] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 54.446003] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 54.518235] clocksource: Switched to clocksource tsc-early [ 54.598021] VFS: Disk quotas dquot_6.6.0 [ 54.645155] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 54.727906] pnp: PnP ACPI init [ 54.765134] system 00:01: [io 0x0500-0x053f] has been reserved [ 54.836252] system 00:01: [io 0x0400-0x047f] has been reserved [ 54.907371] system 00:01: [io 0x0540-0x057f] has been reserved [ 54.978490] system 00:01: [io 0x0600-0x061f] has been reserved [ 55.049609] system 00:01: [io 0x0880-0x0883] has been reserved [ 55.120728] system 00:01: [io 0x0800-0x081f] has been reserved [ 55.191848] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved [ 55.271329] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 55.350819] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 55.430343] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 55.509826] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 55.589309] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 55.668793] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 55.748393] pnp: PnP ACPI: found 4 devices [ 55.803333] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 55.910083] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 55.969703] pci 0000:00:1c.2: PCI bridge to [bus 03] [ 56.029323] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 56.088948] pci 0000:01:00.2: BAR 6: assigned [mem 0x90000000-0x9003ffff pref] [ 56.175754] pci 0000:00:1c.4: PCI bridge to [bus 01] [ 56.235368] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff] [ 56.308581] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x99bfffff] [ 56.390162] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 56.449785] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 56.524042] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 56.598298] pci_bus 0000:00: resource 6 [io 0x03b0-0x03bb window] [ 56.672553] pci_bus 0000:00: resource 7 [io 0x03c0-0x03df window] [ 56.746810] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 56.829433] pci_bus 0000:00: resource 9 [io 0x1000-0x4fff window] [ 56.903688] pci_bus 0000:00: resource 10 [mem 0x90000000-0xa47fbfff window] [ 56.987356] pci_bus 0000:00: resource 11 [mem 0x200000000000-0x20ffffffffff window] [ 57.079393] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 57.146324] pci_bus 0000:01: resource 1 [mem 0x90000000-0x99bfffff] [ 57.221680] pci 0000:0f:00.0: BAR 6: no space for [mem size 0x00100000 pref] [ 57.306394] pci 0000:0f:00.0: BAR 6: failed to assign [mem size 0x00100000 pref] [ 57.395290] pci 0000:0e:02.0: PCI bridge to [bus 0f] [ 57.454905] pci 0000:0e:02.0: bridge window [io 0x5000-0x5fff] [ 57.528117] pci 0000:0e:02.0: bridge window [mem 0xa4a00000-0xa4afffff] [ 57.609695] pci 0000:0e:02.0: bridge window [mem 0xa4800000-0xa49fffff 64bit pref] [ 57.702779] pci_bus 0000:0e: resource 4 [io 0x5000-0x6fff window] [ 57.777031] pci_bus 0000:0e: resource 5 [mem 0xa4800000-0xae3fbfff window] [ 57.859653] pci_bus 0000:0e: resource 6 [mem 0x210000000000-0x21ffffffffff window] [ 57.950639] pci_bus 0000:0f: resource 0 [io 0x5000-0x5fff] [ 58.017577] pci_bus 0000:0f: resource 1 [mem 0xa4a00000-0xa4afffff] [ 58.092879] pci_bus 0000:0f: resource 2 [mem 0xa4800000-0xa49fffff 64bit pref] [ 58.179690] pci 0000:2a:02.0: PCI bridge to [bus 2b] [ 58.239311] pci_bus 0000:2a: resource 4 [io 0x7000-0x8fff window] [ 58.313563] pci_bus 0000:2a: resource 5 [mem 0xae400000-0xb7ffbfff window] [ 58.396182] pci_bus 0000:2a: resource 6 [mem 0x220000000000-0x22ffffffffff window] [ 58.487170] pci 0000:46:04.0: BAR 14: assigned [mem 0xb9100000-0xb91fffff] [ 58.569792] pci 0000:46:02.0: PCI bridge to [bus 47] [ 58.629415] pci 0000:48:00.0: BAR 6: assigned [mem 0xb9100000-0xb917ffff pref] [ 58.716222] pci 0000:48:00.1: BAR 6: assigned [mem 0xb9180000-0xb91fffff pref] [ 58.803026] pci 0000:46:04.0: PCI bridge to [bus 48] [ 58.862642] pci 0000:46:04.0: bridge window [mem 0xb9100000-0xb91fffff] [ 58.944220] pci 0000:46:04.0: bridge window [mem 0xb8000000-0xb90fffff 64bit pref] [ 59.037300] pci_bus 0000:46: resource 4 [io 0x9000-0xafff window] [ 59.111553] pci_bus 0000:46: resource 5 [mem 0xb8000000-0xc1bfbfff window] [ 59.194175] pci_bus 0000:46: resource 6 [mem 0x230000000000-0x23ffffffffff window] [ 59.285161] pci_bus 0000:48: resource 1 [mem 0xb9100000-0xb91fffff] [ 59.360462] pci_bus 0000:48: resource 2 [mem 0xb8000000-0xb90fffff 64bit pref] [ 59.447275] pci 0000:62:02.0: bridge window [io 0x1000-0x0fff] to [bus 63] add_size 1000 [ 59.545580] pci 0000:62:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 63] add_size 200000 add_align 100000 [ 59.683623] pci 0000:62:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 63] add_size 200000 add_align 100000 [ 59.810163] pci 0000:62:03.0: bridge window [io 0x1000-0x0fff] to [bus 64] add_size 1000 [ 59.908470] pci 0000:62:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 64] add_size 200000 add_align 100000 [ 60.046514] pci 0000:62:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus 64] add_size 200000 add_align 100000 [ 60.173056] pci 0000:62:04.0: bridge window [io 0x1000-0x0fff] to [bus 65] add_size 1000 [ 60.271360] pci 0000:62:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 65] add_size 200000 add_align 100000 [ 60.409403] pci 0000:62:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 65] add_size 200000 add_align 100000 [ 60.535944] pci 0000:62:05.0: bridge window [io 0x1000-0x0fff] to [bus 66] add_size 1000 [ 60.634251] pci 0000:62:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 66] add_size 200000 add_align 100000 [ 60.772294] pci 0000:62:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus 66] add_size 200000 add_align 100000 [ 60.898837] pci 0000:62:02.0: BAR 14: assigned [mem 0xc1c00000-0xc1dfffff] [ 60.981456] pci 0000:62:02.0: BAR 15: assigned [mem 0x240000000000-0x2400001fffff 64bit pref] [ 61.083944] pci 0000:62:03.0: BAR 14: assigned [mem 0xc1e00000-0xc1ffffff] [ 61.166564] pci 0000:62:03.0: BAR 15: assigned [mem 0x240000200000-0x2400003fffff 64bit pref] [ 61.269055] pci 0000:62:04.0: BAR 14: assigned [mem 0xc2000000-0xc21fffff] [ 61.351676] pci 0000:62:04.0: BAR 15: assigned [mem 0x240000400000-0x2400005fffff 64bit pref] [ 61.454166] pci 0000:62:05.0: BAR 14: assigned [mem 0xc2200000-0xc23fffff] [ 61.536789] pci 0000:62:05.0: BAR 15: assigned [mem 0x240000600000-0x2400007fffff 64bit pref] [ 61.639278] pci 0000:62:02.0: BAR 13: assigned [io 0xb000-0xbfff] [ 61.713532] pci 0000:62:03.0: BAR 13: no space for [io size 0x1000] [ 61.789874] pci 0000:62:03.0: BAR 13: failed to assign [io size 0x1000] [ 61.870404] pci 0000:62:04.0: BAR 13: no space for [io size 0x1000] [ 61.946752] pci 0000:62:04.0: BAR 13: failed to assign [io size 0x1000] [ 62.027283] pci 0000:62:05.0: BAR 13: no space for [io size 0x1000] [ 62.103631] pci 0000:62:05.0: BAR 13: failed to assign [io size 0x1000] [ 62.184163] pci 0000:62:05.0: BAR 13: assigned [io 0xb000-0xbfff] [ 62.258417] pci 0000:62:04.0: BAR 13: no space for [io size 0x1000] [ 62.334765] pci 0000:62:04.0: BAR 13: failed to assign [io size 0x1000] [ 62.415295] pci 0000:62:03.0: BAR 13: no space for [io size 0x1000] [ 62.491641] pci 0000:62:03.0: BAR 13: failed to assign [io size 0x1000] [ 62.572172] pci 0000:62:02.0: BAR 13: no space for [io size 0x1000] [ 62.648521] pci 0000:62:02.0: BAR 13: failed to assign [io size 0x1000] [ 62.729050] pci 0000:62:02.0: PCI bridge to [bus 63] [ 62.788668] pci 0000:62:02.0: bridge window [mem 0xc1c00000-0xc1dfffff] [ 62.870245] pci 0000:62:02.0: bridge window [mem 0x240000000000-0x2400001fffff 64bit pref] [ 62.971691] pci 0000:62:03.0: PCI bridge to [bus 64] [ 63.031304] pci 0000:62:03.0: bridge window [mem 0xc1e00000-0xc1ffffff] [ 63.112882] pci 0000:62:03.0: bridge window [mem 0x240000200000-0x2400003fffff 64bit pref] [ 63.214328] pci 0000:62:04.0: PCI bridge to [bus 65] [ 63.273940] pci 0000:62:04.0: bridge window [mem 0xc2000000-0xc21fffff] [ 63.355518] pci 0000:62:04.0: bridge window [mem 0x240000400000-0x2400005fffff 64bit pref] [ 63.456964] pci 0000:62:05.0: PCI bridge to [bus 66] [ 63.516578] pci 0000:62:05.0: bridge window [io 0xb000-0xbfff] [ 63.589789] pci 0000:62:05.0: bridge window [mem 0xc2200000-0xc23fffff] [ 63.671366] pci 0000:62:05.0: bridge window [mem 0x240000600000-0x2400007fffff 64bit pref] [ 63.772809] pci_bus 0000:62: resource 4 [io 0xb000-0xbfff window] [ 63.847063] pci_bus 0000:62: resource 5 [mem 0xc1c00000-0xcaffbfff window] [ 63.929684] pci_bus 0000:62: resource 6 [mem 0x240000000000-0x24ffffffffff window] [ 64.020672] pci_bus 0000:63: resource 1 [mem 0xc1c00000-0xc1dfffff] [ 64.095974] pci_bus 0000:63: resource 2 [mem 0x240000000000-0x2400001fffff 64bit pref] [ 64.191146] pci_bus 0000:64: resource 1 [mem 0xc1e00000-0xc1ffffff] [ 64.266447] pci_bus 0000:64: resource 2 [mem 0x240000200000-0x2400003fffff 64bit pref] [ 64.361616] pci_bus 0000:65: resource 1 [mem 0xc2000000-0xc21fffff] [ 64.436918] pci_bus 0000:65: resource 2 [mem 0x240000400000-0x2400005fffff 64bit pref] [ 64.532087] pci_bus 0000:66: resource 0 [io 0xb000-0xbfff] [ 64.599024] pci_bus 0000:66: resource 1 [mem 0xc2200000-0xc23fffff] [ 64.674327] pci_bus 0000:66: resource 2 [mem 0x240000600000-0x2400007fffff 64bit pref] [ 64.769502] pci_bus 0000:80: resource 4 [mem 0xcb800000-0xd4ffbfff window] [ 64.852124] pci_bus 0000:80: resource 5 [mem 0x250000000000-0x25ffffffffff window] [ 64.943112] pci 0000:83:02.0: PCI bridge to [bus 84] [ 65.002732] pci_bus 0000:83: resource 4 [io 0xc000-0xcfff window] [ 65.076983] pci_bus 0000:83: resource 5 [mem 0xd5000000-0xdebfbfff window] [ 65.159606] pci_bus 0000:83: resource 6 [mem 0x260000000000-0x26ffffffffff window] [ 65.250594] pci 0000:a1:02.0: PCI bridge to [bus a2] [ 65.310215] pci_bus 0000:a1: resource 4 [io 0xd000-0xdfff window] [ 65.384466] pci_bus 0000:a1: resource 5 [mem 0xdec00000-0xe87fbfff window] [ 65.467088] pci_bus 0000:a1: resource 6 [mem 0x270000000000-0x27ffffffffff window] [ 65.558078] pci 0000:bf:02.0: PCI bridge to [bus c0] [ 65.617696] pci_bus 0000:bf: resource 4 [io 0xe000-0xefff window] [ 65.691952] pci_bus 0000:bf: resource 5 [mem 0xe8800000-0xf23fbfff window] [ 65.774568] pci_bus 0000:bf: resource 6 [mem 0x280000000000-0x28ffffffffff window] [ 65.865559] pci 0000:dd:02.0: bridge window [io 0x1000-0x0fff] to [bus de] add_size 1000 [ 65.963864] pci 0000:dd:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus de] add_size 200000 add_align 100000 [ 66.101906] pci 0000:dd:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus de] add_size 200000 add_align 100000 [ 66.228446] pci 0000:dd:03.0: bridge window [io 0x1000-0x0fff] to [bus df] add_size 1000 [ 66.326752] pci 0000:dd:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus df] add_size 200000 add_align 100000 [ 66.464795] pci 0000:dd:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus df] add_size 200000 add_align 100000 [ 66.591336] pci 0000:dd:04.0: bridge window [io 0x1000-0x0fff] to [bus e0] add_size 1000 [ 66.689643] pci 0000:dd:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus e0] add_size 200000 add_align 100000 [ 66.827686] pci 0000:dd:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus e0] add_size 200000 add_align 100000 [ 66.954227] pci 0000:dd:05.0: bridge window [io 0x1000-0x0fff] to [bus e1] add_size 1000 [ 67.052533] pci 0000:dd:05.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus e1] add_size 200000 add_align 100000 [ 67.190575] pci 0000:dd:05.0: bridge window [mem 0x00100000-0x000fffff] to [bus e1] add_size 200000 add_align 100000 [ 67.317117] pci 0000:dd:02.0: BAR 14: assigned [mem 0xf2400000-0xf25fffff] [ 67.399737] pci 0000:dd:02.0: BAR 15: assigned [mem 0x290000000000-0x2900001fffff 64bit pref] [ 67.502228] pci 0000:dd:03.0: BAR 14: assigned [mem 0xf2600000-0xf27fffff] [ 67.584848] pci 0000:dd:03.0: BAR 15: assigned [mem 0x290000200000-0x2900003fffff 64bit pref] [ 67.687337] pci 0000:dd:04.0: BAR 14: assigned [mem 0xf2800000-0xf29fffff] [ 67.769960] pci 0000:dd:04.0: BAR 15: assigned [mem 0x290000400000-0x2900005fffff 64bit pref] [ 67.872448] pci 0000:dd:05.0: BAR 14: assigned [mem 0xf2a00000-0xf2bfffff] [ 67.955070] pci 0000:dd:05.0: BAR 15: assigned [mem 0x290000600000-0x2900007fffff 64bit pref] [ 68.057559] pci 0000:dd:02.0: BAR 13: assigned [io 0xf000-0xffff] [ 68.131816] pci 0000:dd:03.0: BAR 13: no space for [io size 0x1000] [ 68.208163] pci 0000:dd:03.0: BAR 13: failed to assign [io size 0x1000] [ 68.288698] pci 0000:dd:04.0: BAR 13: no space for [io size 0x1000] [ 68.365044] pci 0000:dd:04.0: BAR 13: failed to assign [io size 0x1000] [ 68.445575] pci 0000:dd:05.0: BAR 13: no space for [io size 0x1000] [ 68.521920] pci 0000:dd:05.0: BAR 13: failed to assign [io size 0x1000] [ 68.602453] pci 0000:dd:05.0: BAR 13: assigned [io 0xf000-0xffff] [ 68.676705] pci 0000:dd:04.0: BAR 13: no space for [io size 0x1000] [ 68.753054] pci 0000:dd:04.0: BAR 13: failed to assign [io size 0x1000] [ 68.833582] pci 0000:dd:03.0: BAR 13: no space for [io size 0x1000] [ 68.909931] pci 0000:dd:03.0: BAR 13: failed to assign [io size 0x1000] [ 68.990463] pci 0000:dd:02.0: BAR 13: no space for [io size 0x1000] [ 69.066808] pci 0000:dd:02.0: BAR 13: failed to assign [io size 0x1000] [ 69.147339] pci 0000:dd:02.0: PCI bridge to [bus de] [ 69.206957] pci 0000:dd:02.0: bridge window [mem 0xf2400000-0xf25fffff] [ 69.288532] pci 0000:dd:02.0: bridge window [mem 0x290000000000-0x2900001fffff 64bit pref] [ 69.389980] pci 0000:dd:03.0: PCI bridge to [bus df] [ 69.449594] pci 0000:dd:03.0: bridge window [mem 0xf2600000-0xf27fffff] [ 69.531170] pci 0000:dd:03.0: bridge window [mem 0x290000200000-0x2900003fffff 64bit pref] [ 69.632616] pci 0000:dd:04.0: PCI bridge to [bus e0] [ 69.692229] pci 0000:dd:04.0: bridge window [mem 0xf2800000-0xf29fffff] [ 69.773806] pci 0000:dd:04.0: bridge window [mem 0x290000400000-0x2900005fffff 64bit pref] [ 69.875252] pci 0000:dd:05.0: PCI bridge to [bus e1] [ 69.934866] pci 0000:dd:05.0: bridge window [io 0xf000-0xffff] [ 70.008078] pci 0000:dd:05.0: bridge window [mem 0xf2a00000-0xf2bfffff] [ 70.089654] pci 0000:dd:05.0: bridge window [mem 0x290000600000-0x2900007fffff 64bit pref] [ 70.191100] pci_bus 0000:dd: resource 4 [io 0xf000-0xffff window] [ 70.265352] pci_bus 0000:dd: resource 5 [mem 0xf2400000-0xfb7fbfff window] [ 70.347975] pci_bus 0000:dd: resource 6 [mem 0x290000000000-0x29ffffffffff window] [ 70.438961] pci_bus 0000:de: resource 1 [mem 0xf2400000-0xf25fffff] [ 70.514262] pci_bus 0000:de: resource 2 [mem 0x290000000000-0x2900001fffff 64bit pref] [ 70.609434] pci_bus 0000:df: resource 1 [mem 0xf2600000-0xf27fffff] [ 70.684735] pci_bus 0000:df: resource 2 [mem 0x290000200000-0x2900003fffff 64bit pref] [ 70.779905] pci_bus 0000:e0: resource 1 [mem 0xf2800000-0xf29fffff] [ 70.855206] pci_bus 0000:e0: resource 2 [mem 0x290000400000-0x2900005fffff 64bit pref] [ 70.950377] pci_bus 0000:e1: resource 0 [io 0xf000-0xffff] [ 71.017315] pci_bus 0000:e1: resource 1 [mem 0xf2a00000-0xf2bfffff] [ 71.092616] pci_bus 0000:e1: resource 2 [mem 0x290000600000-0x2900007fffff 64bit pref] [ 71.187894] NET: Registered protocol family 2 [ 71.240679] tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes) [ 71.338217] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 71.428775] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 71.509446] TCP: Hash tables configured (established 524288 bind 65536) [ 71.589386] MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes) [ 71.673293] UDP hash table entries: 65536 (order: 9, 2097152 bytes) [ 71.748923] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes) [ 71.829946] NET: Registered protocol family 1 [ 71.882243] NET: Registered protocol family 44 [ 71.935931] pci 0000:01:00.1: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 72.036338] pci 0000:01:00.1: pci_fixup_video+0x0/0x110 took 98055 usecs [ 72.117537] PCI: CLS 64 bytes, default 64 [ 72.165697] Unpacking initramfs... [ 73.198328] Freeing initrd memory: 89452K [ 73.246652] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 73.324047] software IO TLB: mapped [mem 0x6b800000-0x6f800000] (64MB) [ 73.550955] Initialise system trusted keyrings [ 73.604303] Key type blacklist registered [ 73.652538] workingset: timestamp_bits=36 max_order=27 bucket_order=0 [ 73.731295] zbud: loaded [ 73.761967] pstore: using deflate compression [ 73.814738] Platform Keyring initialized [ 74.397720] NET: Registered protocol family 38 [ 74.451064] Key type asymmetric registered [ 74.500231] tsc: Refined TSC clocksource calibration: 2194.844 MHz [ 74.561008] Asymmetric key parser 'x509' registered [ 74.574535] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa32c1de86, max_idle_ns: 440795251159 ns [ 74.633070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 74.842292] clocksource: Switched to clocksource tsc [ 74.842463] io scheduler mq-deadline registered [ 74.956565] io scheduler kyber registered [ 75.004838] io scheduler bfq registered [ 75.051761] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 75.135921] pcieport 0000:00:1c.0: Signaling with IRQ 130 [ 75.201113] pcieport 0000:00:1c.2: Signaling with IRQ 131 [ 75.266277] pcieport 0000:00:1c.3: Signaling with IRQ 132 [ 75.331459] pcieport 0000:00:1c.4: Signaling with IRQ 133 [ 75.396665] pcieport 0000:00:1c.5: Signaling with IRQ 134 [ 75.461806] pcieport 0000:0e:02.0: Signaling with IRQ 135 [ 75.526909] pcieport 0000:2a:02.0: Signaling with IRQ 136 [ 75.592066] pcieport 0000:46:02.0: Signaling with IRQ 137 [ 75.657182] pcieport 0000:46:04.0: Signaling with IRQ 138 [ 75.722308] pcieport 0000:62:02.0: Signaling with IRQ 139 [ 75.787322] pcieport 0000:62:02.0: Slot #13 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 75.968868] pcieport 0000:62:03.0: Signaling with IRQ 140 [ 76.033881] pcieport 0000:62:03.0: Slot #14 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 76.215380] pcieport 0000:62:04.0: Signaling with IRQ 141 [ 76.280393] pcieport 0000:62:04.0: Slot #15 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 76.461896] pcieport 0000:62:05.0: Signaling with IRQ 142 [ 76.526905] pcieport 0000:62:05.0: Slot #16 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 76.708491] pcieport 0000:83:02.0: Signaling with IRQ 143 [ 76.773622] pcieport 0000:a1:02.0: Signaling with IRQ 144 [ 76.838786] pcieport 0000:bf:02.0: Signaling with IRQ 145 [ 76.903942] pcieport 0000:dd:02.0: Signaling with IRQ 146 [ 76.968959] pcieport 0000:dd:02.0: Slot #29 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 77.150511] pcieport 0000:dd:03.0: Signaling with IRQ 147 [ 77.215528] pcieport 0000:dd:03.0: Slot #30 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 77.397039] pcieport 0000:dd:04.0: Signaling with IRQ 148 [ 77.462055] pcieport 0000:dd:04.0: Slot #31 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 77.643587] pcieport 0000:dd:05.0: Signaling with IRQ 149 [ 77.708600] pcieport 0000:dd:05.0: Slot #32 AttnBtn+ PwrCtrl- MRL- AttnInd- PwrInd+ HotPlug+ Surprise+ Interlock- NoCompl- IbPresDis- LLActRep+ (with Cmd Compl erratum) [ 77.890291] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 77.971092] efifb: probing for efifb [ 78.014099] efifb: framebuffer at 0x98000000, using 3072k, total 3072k [ 78.092722] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ 78.165057] efifb: scrolling: redraw [ 78.208043] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 78.275206] Console: switching to colour frame buffer device 128x48 [ 78.371026] fb0: EFI VGA frame buffer device [ 78.426022] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 78.515430] ACPI: Power Button [PWRF] [ 78.562118] acpi/hmat: HMAT: Memory Flags:0001 Processor Domain:0 Memory Domain:0 [ 78.652530] acpi/hmat: HMAT: Memory Flags:0001 Processor Domain:1 Memory Domain:1 [ 78.742952] acpi/hmat: HMAT: Memory Flags:0001 Processor Domain:2 Memory Domain:2 [ 78.833381] acpi/hmat: HMAT: Memory Flags:0001 Processor Domain:3 Memory Domain:3 [ 78.923809] acpi/hmat: HMAT: Locality: Flags:00 Type:Access Latency Initiator Domains:4 Target Domains:4 Base:100 [ 79.047881] acpi/hmat: Initiator-Target[0-0]:0 nsec [ 79.108863] acpi/hmat: Initiator-Target[0-1]:0 nsec [ 79.169848] acpi/hmat: Initiator-Target[0-2]:50 nsec [ 79.231878] acpi/hmat: Initiator-Target[0-3]:50 nsec [ 79.293915] acpi/hmat: Initiator-Target[1-0]:0 nsec [ 79.354890] acpi/hmat: Initiator-Target[1-1]:0 nsec [ 79.415871] acpi/hmat: Initiator-Target[1-2]:50 nsec [ 79.477911] acpi/hmat: Initiator-Target[1-3]:50 nsec [ 79.539949] acpi/hmat: Initiator-Target[2-0]:50 nsec [ 79.601980] acpi/hmat: Initiator-Target[2-1]:50 nsec [ 79.664015] acpi/hmat: Initiator-Target[2-2]:0 nsec [ 79.725008] acpi/hmat: Initiator-Target[2-3]:0 nsec [ 79.785993] acpi/hmat: Initiator-Target[3-0]:50 nsec [ 79.848024] acpi/hmat: Initiator-Target[3-1]:50 nsec [ 79.910061] acpi/hmat: Initiator-Target[3-2]:0 nsec [ 79.977355] acpi/hmat: Initiator-Target[3-3]:0 nsec [ 80.044638] acpi/hmat: HMAT: Locality: Flags:00 Type:Access Bandwidth Initiator Domains:4 Target Domains:4 Base:10 [ 80.176300] acpi/hmat: Initiator-Target[0-0]:85280 MB/s [ 80.248193] acpi/hmat: Initiator-Target[0-1]:85280 MB/s [ 80.319859] acpi/hmat: Initiator-Target[0-2]:85280 MB/s [ 80.391323] acpi/hmat: Initiator-Target[0-3]:85280 MB/s [ 80.462648] acpi/hmat: Initiator-Target[1-0]:85280 MB/s [ 80.533862] acpi/hmat: Initiator-Target[1-1]:85280 MB/s [ 80.604842] acpi/hmat: Initiator-Target[1-2]:85280 MB/s [ 80.675610] acpi/hmat: Initiator-Target[1-3]:85280 MB/s [ 80.746237] acpi/hmat: Initiator-Target[2-0]:85280 MB/s [ 80.816759] acpi/hmat: Initiator-Target[2-1]:85280 MB/s [ 80.887049] acpi/hmat: Initiator-Target[2-2]:85280 MB/s [ 80.957121] acpi/hmat: Initiator-Target[2-3]:85280 MB/s [ 81.027053] acpi/hmat: Initiator-Target[3-0]:85280 MB/s [ 81.096873] acpi/hmat: Initiator-Target[3-1]:85280 MB/s [ 81.166451] acpi/hmat: Initiator-Target[3-2]:85280 MB/s [ 81.235832] acpi/hmat: Initiator-Target[3-3]:85280 MB/s [ 81.305171] ERST: Error Record Serialization Table (ERST) support is initialized. [ 81.399698] pstore: Registered erst as persistent store backend [ 81.475507] EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 81.594829] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 81.688853] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 81.789674] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 81.903320] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 81.997292] Non-volatile memory driver v1.3 [ 82.053647] tpm_tis STM7364:00: 2.0 TPM (device-id 0x0, rev-id 78) [ 82.163047] rdac: device handler registered [ 82.217902] hp_sw: device handler registered [ 82.273688] emc: device handler registered [ 82.327792] alua: device handler registered [ 82.382785] libphy: Fixed MDIO Bus: probed [ 82.436714] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 82.519762] ehci-pci: EHCI PCI platform driver [ 82.577986] ehci-pci 0000:01:00.4: EHCI Host Controller [ 82.645677] ehci-pci 0000:01:00.4: new USB bus registered, assigned bus number 1 [ 82.739652] ehci-pci 0000:01:00.4: irq 150, io mem 0x99b9c000 [ 82.820039] ehci-pci 0000:01:00.4: USB 2.0 started, EHCI 1.00 [ 82.894161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 82.998972] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 83.091317] usb usb1: Product: EHCI Host Controller [ 83.155434] usb usb1: Manufacturer: Linux 4.18.0-305.62.1.el8_4.x86_64 ehci_hcd [ 83.249187] usb usb1: SerialNumber: 0000:01:00.4 [ 83.310696] hub 1-0:1.0: USB hub found [ 83.361571] hub 1-0:1.0: 8 ports detected [ 83.415881] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 83.496380] ohci-pci: OHCI PCI platform driver [ 83.555988] uhci_hcd: USB Universal Host Controller Interface driver [ 83.639054] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 83.708263] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 83.804560] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 83.920964] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 84.009347] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 84.115628] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 84.209460] usb usb2: Product: xHCI Host Controller [ 84.275066] usb usb2: Manufacturer: Linux 4.18.0-305.62.1.el8_4.x86_64 xhci-hcd [ 84.370297] usb usb2: SerialNumber: 0000:00:14.0 [ 84.433336] hub 2-0:1.0: USB hub found [ 84.485713] hub 2-0:1.0: 16 ports detected [ 84.497016] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 84.542708] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 84.699400] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 84.758287] usb 1-1: New USB device found, idVendor=03f0, idProduct=7029, bcdDevice= 0.02 [ 84.796391] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 84.903120] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 84.986919] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 85.081380] usb 1-1: Product: Virtual Keyboard [ 85.189570] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 85.189572] usb usb3: Product: xHCI Host Controller [ 85.251495] usb 1-1: Manufacturer: iLO [ 85.346995] usb usb3: Manufacturer: Linux 4.18.0-305.62.1.el8_4.x86_64 xhci-hcd [ 85.346996] usb usb3: SerialNumber: 0000:00:14.0 [ 85.347263] hub 3-0:1.0: USB hub found [ 85.529013] usb 1-2: new high-speed USB device number 3 using ehci-pci [ 85.563618] hub 3-0:1.0: 10 ports detected [ 85.757508] usb 1-2: New USB device found, idVendor=03f0, idProduct=2227, bcdDevice= 0.01 [ 85.767678] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 85.825099] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 85.825100] usb 1-2: Product: Virtual CD-ROM [ 85.825100] usb 1-2: Manufacturer: iLO [ 86.227349] usbcore: registered new interface driver usbserial_generic [ 86.314469] usbserial: USB Serial support registered for generic [ 86.353555] usb 2-3: New USB device found, idVendor=0424, idProduct=2660, bcdDevice= 8.01 [ 86.395351] i8042: PNP: No PS/2 controller found. [ 86.502607] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 86.503692] hub 2-3:1.0: USB hub found [ 86.567936] i8042: Probing ports directly. [ 86.774627] hub 2-3:1.0: 2 ports detected [ 87.106531] i8042: Can't read CTR while initializing i8042 [ 87.181100] i8042: probe of i8042 failed with error -5 [ 87.251604] mousedev: PS/2 mouse device common for all mice [ 87.327419] rtc_cmos 00:00: RTC can wake from S4 [ 87.391997] rtc_cmos 00:00: registered as rtc0 [ 87.453930] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 87.554782] intel_pstate: Intel P-state driver initializing [ 87.643403] EFI Variables Facility v0.08 2004-May-17 [ 87.717574] hid: raw HID events driver (C) Jiri Kosina [ 87.788518] input: iLO Virtual Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:01:00.4/usb1/1-1/1-1:1.0/0003:03F0:7029.0001/input/input1 [ 88.008626] hid-generic 0003:03F0:7029.0001: input,hidraw0: USB HID v1.10 Keyboard [iLO Virtual Keyboard] on usb-0000:01:00.4-1/input0 [ 88.173658] input: iLO Virtual Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:01:00.4/usb1/1-1/1-1:1.1/0003:03F0:7029.0002/input/input2 [ 88.343139] hid-generic 0003:03F0:7029.0002: input,hidraw1: USB HID v1.10 Mouse [iLO Virtual Keyboard] on usb-0000:01:00.4-1/input1 [ 88.505617] usbcore: registered new interface driver usbhid [ 88.582861] usbhid: USB HID core driver [ 88.639213] drop_monitor: Initializing network drop monitor service [ 88.724912] Initializing XFRM netlink socket [ 88.786537] NET: Registered protocol family 10 [ 88.850664] Segment Routing with IPv6 [ 88.904564] NET: Registered protocol family 17 [ 88.968120] mpls_gso: MPLS GSO support [ 89.057261] microcode: sig=0x606a6, pf=0x1, revision=0xd000363 [ 89.145353] microcode: Microcode Update Driver: v2.2. [ 89.156425] resctrl: L3 allocation detected [ 89.286622] resctrl: MB allocation detected [ 89.346325] resctrl: L3 monitoring detected [ 89.405901] AVX2 version of gcm_enc/dec engaged. [ 89.470685] AES CTR mode by8 optimization enabled [ 89.822020] sched_clock: Marking stable (89822014207, 0)->(141575802536, -51753788329) [ 89.927737] registered taskstats version 1 [ 89.986392] Loading compiled-in X.509 certificates [ 90.100265] Loaded X.509 cert 'Red Hat Enterprise Linux kernel signing key: 50d7cbcde40d8e71bbdeeb056f556f1e4cb31eba' [ 90.238074] Loaded X.509 cert 'Red Hat Enterprise Linux Driver Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80' [ 90.396943] Loaded X.509 cert 'Red Hat Enterprise Linux kpatch signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8' [ 90.535075] zswap: loaded using pool lzo/zbud [ 90.598196] page_owner is disabled [ 90.701045] Key type big_key registered [ 90.783180] Key type trusted registered [ 90.865090] Key type encrypted registered [ 90.923360] integrity: Loading X.509 certificate: UEFI:db [ 90.997908] integrity: Loaded X.509 cert 'Hewlett Packard Enterprise Company: HPE UEFI Secure Boot 2016 DB Key: a068bfe686eec826df935e3bb1cd36f1c2772560' [ 91.183359] integrity: Loading X.509 certificate: UEFI:db [ 91.258396] integrity: Loaded X.509 cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec' [ 91.432140] integrity: Loading X.509 certificate: UEFI:db [ 91.507576] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 91.648413] integrity: Loading X.509 certificate: UEFI:db [ 91.724196] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 91.868384] integrity: Loading X.509 certificate: UEFI:db [ 91.944497] integrity: Loaded X.509 cert 'VMware, Inc.: VMware Secure Boot Signing: 04597f3e1ffb240bba0ff0f05d5eb05f3e15f6d7' [ 92.092969] integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table) [ 92.192302] integrity: Loaded X.509 cert 'Red Hat Secure Boot CA 5: cc6fa5e72868ba494e939bbd680b9144769a9f8f' [ 92.322940] ima: Allocated hash algorithm: sha256 [ 92.408127] evm: Initialising EVM extended attributes: [ 92.408197] audit: type=1807 audit(1664548681.407:2): action=measure func=KEXEC_KERNEL_CHECK res=1 [ 92.480651] evm: security.selinux [ 92.480652] evm: security.ima [ 92.480652] evm: security.capability [ 92.480652] evm: HMAC attrs: 0x1 [ 92.481531] rtc_cmos 00:00: setting system clock to 2022-09-30 14:38:53 UTC (1664548733) [ 92.599332] audit: type=1807 audit(1664548681.407:3): action=measure func=MODULE_CHECK res=1 [ 93.015366] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7 [ 93.122655] Freeing unused decrypted memory: 2036K [ 93.190908] Freeing unused kernel memory: 2480K [ 93.256032] Write protecting the kernel read-only data: 22528k [ 93.337672] Freeing unused kernel memory: 2012K [ 93.402757] Freeing unused kernel memory: 476K [ 93.505564] systemd[1]: systemd 239 (239-45.el8_4.12) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 93.832220] systemd[1]: Detected architecture x86-64. [ 93.903870] systemd[1]: Running in initial RAM disk. Welcome to Red Hat Enterprise Linux CoreOS 410.84.202209272044-0 (Ootpa) dracut-049-137.git20220131.el8_4.1 (Initramfs)! [ 94.130094] systemd[1]: No hostname configured. [ 94.195400] systemd[1]: Set hostname to . [ 94.265834] systemd[1]: Initializing machine ID from random generator. [ 94.439419] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 94.634113] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 94.744217] systemd[1]: Listening on Open-iSCSI iscsid Socket. [ OK ] Listening on Open-iSCSI iscsid Socket. [ 94.889289] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target Timers. [ OK ] Started Forward Password Requests to Clevis Directory Watch. [ OK ] Reached target Slices. [ OK ] Listening on udev Control Socket. [ OK ] Listening on udev Kernel Socket. [ OK ] Reached target Swap. [ OK ] Listening on Open-iSCSI iscsiuio Socket. [ OK ] Listening on Journal Socket. Starting Create list of required st…ce nodes for the current kernel... Starting Setup Virtual Console... Starting Afterburn Initrd Setup Network Kernel Arguments... Starting CoreOS Ignition User Config Setup... Starting Journal Service... Starting CoreOS: Touch /run/agetty.reload... [ 95.948361] coreos-ignition-setup-user[1285]: File /config.ign does not exist.. Skipping copy [ 96.096358] Loading iSCSI transport class v2.0-870. [ OK ] Started CoreOS Tear Down Initramfs. [ OK ] Reached target Sockets. Starting Load Kernel Modules... [ 96.332194] fuse: init (API version 7.31) [ OK 96.395026] systemd-modules-load[1299]: Inserted module 'fuse' 0m] Started Mems[ 96.491925] systemd-modules-load[1299]: Module 'msr' is builtin track Anylazing Service. [ OK ] Started Journal Service. [ OK 96.654015] systemd[1]: Started iSCSI UserSpace I/O driver. 0m] Started iSCSI UserSpace I/O driver. [ 96.783063] systemd[1]: Started Create list of required static device nodes for the current kernel. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ 96.993757] systemd[1]: systemd-vconsole-setup.service: Succeeded. [ 97.078400] systemd[1]: Started Setup Virtual Console. [ OK ] Started Setup Virtual Console. [ 97.205653] systemd[1]: afterburn-network-kargs.service: Succeeded. [ 97.291113] systemd[1]: Started Afterburn Initrd Setup Network Kernel Arguments. [ OK ] Started Afterburn Initrd Setup Network Kernel Arguments. [ OK 97.474810] systemd[1]: Started CoreOS Ignition User Config Setup. 0m] Started CoreOS Ignition User Config Setup. [ OK ] Started CoreOS: Touch /run/agetty.reload. [ OK ] Started Load Kernel Modules. Starting Apply Kernel Variables... [ 97.792594] systemd[1]: Starting dracut ask for additional cmdline parameters... Starting dracut ask for additional cmdline parameters... [ 97.954617] systemd[1]: Starting Create Static Device Nodes in /dev... Startin[ 98.042759] systemd[1]: Started Apply Kernel Variables. [ OK ] Started Apply Kernel Variables. [ OK 98.181027] systemd[1]: Started dracut ask for additional cmdline parameters. 0m] Started dracut ask for additional cmdline parameters. [ 98.348368] systemd[1]: Started Create Static Device Nodes in /dev. [ OK ] Started Create Static Device Nodes in /dev. Startin[ 98.494467] systemd[1]: Starting sysroot-xfs-ephemeral-mkfs.service... g sysroot-xfs-ephemeral-mkfs.service... Startin[ 98.635276] systemd[1]: Starting dracut cmdline hook... g dracut cmdline[ 98.723769] dracut-cmdline[1338]: dracut-410.84.202209272044-0 dracut-049-137.git20220131.el8_4.1 hook... [ 98.847696] dracut-cmdline[1338]: Using kernel command line parameters: ip=auto BOOT_IMAGE=/images/pxeboot/vmlinuz random.trust_cpu=on coreos.liveiso=rhcos-410.84.202209272044-0 ignition.firstboot ignition.platform.id=metal console=tty0 console=ttyS0 [ 99.140107] iscsi: registered transport (tcp) [ 99.163942] mkfs.xfs[1436]: meta-data=/run/ephemeral.xfsloop isize=512 agcount=4, agsize=16501097 blks [ 99.326212] mkfs.xfs[1436]: = sectsz=512 attr=2, projid32bit=1 [ OK 99.440466] mkfs.xfs[1436]: = crc=1 finobt=1, sparse=1, rmapbt=0 0m] Started sysr[ 99.570058] mkfs.xfs[1436]: = reflink=1 oot-xfs-ephemera[ 99.665935] mkfs.xfs[1436]: data = bsize=4096 blocks=66004388, imaxpct=25 [ 99.794165] mkfs.xfs[1436]: = sunit=0 swidth=0 blks [ 99.907544] mkfs.xfs[1436]: naming =version 2 bsize=4096 ascii-ci=0, ftype=1 [ 99.907551] mkfs.xfs[1436]: log =internal log bsize=4096 blocks=32228, version=2 Mountin[ 99.907557] mkfs.xfs[1436]: = sectsz=512 sunit=0 blks, lazy-count=1 g /run/ephemeral[ 99.907564] mkfs.xfs[1436]: realtime =none extsz=4096 blocks=0, rtextents=0 ... [ 99.907772] systemd[1]: Started sysroot-xfs-ephemeral-mkfs.service. [ 100.469517] systemd[1]: Mounting /run/ephemeral... [ 100.537221] loop: module loaded [ 100.585330] iscsi: registered transport (qla4xxx) [ 100.650851] QLogic iSCSI HBA Driver [ 100.706650] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015) [ 100.849704] Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015) [ 100.934128] iscsi: registered transport (cxgb4i) [ 101.005027] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 101.085803] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) [ 101.090325] SGI XFS with ACLs, security attributes, quota, no debug enabled [ 101.178803] iscsi: registered transport (bnx2i) [ 101.339030] XFS (loop0): Mounting V5 Filesystem [ 101.407624] XFS (loop0): Ending clean mount [ OK 101.469921] systemd[1]: Mounted /run/ephemeral. 0m] Mounted /run[ 101.550856] iscsi: registered transport (be2iscsi) /ephemeral. [ 101.624381] In beiscsi_module_init, tt=0000000098524cfe [ 101.835907] systemd[1]: Started dracut cmdline hook. [ OK ] Started dracut cmdline hook. Startin[ 101.952625] systemd[1]: Starting dracut pre-udev hook... g dracut pre-ude[ 102.043506] device-mapper: uevent: version 1.0.3 v hook... [ 102.114800] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ OK 102.254365] systemd[1]: Started dracut pre-udev hook. 0m] Started dracut pre-udev hook. Startin[ 102.371306] systemd[1]: Starting udev Kernel Device Manager... g udev Kernel Device Manager... [ OK 102.520970] systemd[1]: Started udev Kernel Device Manager. 0m] Started udev Kernel Device Manager. Startin[ 102.651842] systemd[1]: Starting dracut pre-trigger hook... g dracut pre-tri[ 102.744739] dracut-pre-trigger[1645]: rd.md=0: removing MD RAID activation gger hook... [ OK 102.852459] systemd[1]: Started dracut pre-trigger hook. 0m] Started dracut pre-trigger hook. Startin[ 102.974801] systemd[1]: Starting udev Coldplug all Devices... g udev Coldplug all Devices... Mountin[ 103.099782] systemd[1]: Mounting Kernel Configuration File System... g Kernel Configuration File Syst[ 103.209951] usb-storage 1-2:1.0: USB Mass Storage device detected em... [ 103.309441] scsi host0: usb-storage 1-2:1.0 [ 103.310392] systemd[1]: Started udev Coldplug all Devices. [ 103.368792] megasas: 07.714.04.00-rh1 [ 103.368940] usbcore: registered new interface driver usb-storage [ 103.443854] systemd-udevd[1877]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 103.718951] megaraid_sas 0000:0f:00.0: FW now in Ready state [ 103.718953] megaraid_sas 0000:0f:00.0: 63 bit DMA mask and 63 bit consistent mask [ OK 103.719253] megaraid_sas 0000:0f:00.0: firmware supports msix : (128) 0m] Started udev[ 103.990224] megaraid_sas 0000:0f:00.0: requested/available msix 120/120 Coldplug all De[ 104.085609] megaraid_sas 0000:0f:00.0: current msix/online cpus : (120/112) vices. [ 104.186434] megaraid_sas 0000:0f:00.0: RDPQ mode : (enabled) [ 104.255765] systemd[1]: Mounted Kernel Configuration File System. [ 104.263084] megaraid_sas 0000:0f:00.0: Current firmware supports maximum commands: 5101 LDIO threshold: 0 [ OK 104.470135] QLogic FastLinQ 4xxxx Core Module qed 8.37.0.20 0m] Mounted Kern[ 104.518177] scsi 0:0:0:0: CD-ROM iLO Virtual DVD-ROM PQ: 0 ANSI: 0 CCS el Configuration[ 104.554709] megaraid_sas 0000:0f:00.0: Performance mode :Balanced (latency index = 8) File System. [ 104.554710] megaraid_sas 0000:0f:00.0: FW supports sync cache : Yes [ 104.554714] megaraid_sas 0000:0f:00.0: megasas_disable_intr_fusion is called outbound_intr_mask:0x40000009 [ 104.643034] megaraid_sas 0000:0f:00.0: FW supports atomic descriptor : Yes [ 104.880136] systemd[1]: Starting udev Wait for Complete Device Initialization... [ 104.905012] megaraid_sas 0000:0f:00.0: FW provided supportMaxExtLDs: 1 max_lds: 240 [ 105.299310] megaraid_sas 0000:0f:00.0: controller type : MR(4096MB) [ 105.299311] megaraid_sas 0000:0f:00.0: Online Controller Reset(OCR) : Enabled Startin[ 105.299311] megaraid_sas 0000:0f:00.0: Secure JBOD support : Yes g udev Wait for [ 105.299312] megaraid_sas 0000:0f:00.0: NVMe passthru support : Yes Complete Device [ 105.299313] megaraid_sas 0000:0f:00.0: FW provided TM TaskAbort/Reset timeout : 6 secs/60 secs Initialization..[ 105.299313] megaraid_sas 0000:0f:00.0: JBOD sequence map support : Yes . [ 105.299314] megaraid_sas 0000:0f:00.0: PCI Lane Margining support : Yes [ 105.321174] megaraid_sas 0000:0f:00.0: NVME page size : (4096) [ 106.042697] megaraid_sas 0000:0f:00.0: megasas_enable_intr_fusion is called outbound_intr_mask:0x40000000 [ 106.042802] scsi 0:0:0:0: Attached scsi generic sg0 type 5 [ 106.166491] megaraid_sas 0000:0f:00.0: INIT adapter done [ 106.167691] megaraid_sas 0000:0f:00.0: Snap dump wait time : 15 [ 106.393407] megaraid_sas 0000:0f:00.0: pci id : (0x1000)/(0x10e2)/(0x1590)/(0x0293) [ 106.495291] megaraid_sas 0000:0f:00.0: unevenspan support : no [ 106.574066] megaraid_sas 0000:0f:00.0: firmware crash dump : no [ 106.653870] megaraid_sas 0000:0f:00.0: JBOD sequence map : enabled [ 106.736833] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.37.0.20 [ 106.736833] [ 106.737027] megaraid_sas 0000:0f:00.0: Max firmware commands: 5100 shared with nr_hw_queues = 112 [ 106.970710] scsi host1: Avago SAS based MegaRAID driver [ 107.046869] sr 0:0:0:0: [sr0] scsi3-mmc drive: 12x/12x cd/rw tray [ 107.107341] qede 48:00.00: Storm FW 8.42.2.0, Management FW 8.55.43.0 [MBI 8.55.14] [eth0] [ 107.128931] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 107.304031] qede 48:00.01: Storm FW 8.42.2.0, Management FW 8.55.43.0 [MBI 8.55.14] [eth1] [ 107.418971] systemd-udevd[1733]: Using default interface naming scheme 'rhel-8.0'. [ 107.422420] qede 0000:48:00.0 ens10f0: renamed from eth0 [ 107.519467] systemd-udevd[1772]: Using default interface naming scheme 'rhel-8.0'. [ 107.692502] systemd-udevd[1733]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 107.833976] systemd-udevd[1772]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. [ 108.084512] qede 0000:48:00.1 ens10f1: renamed from eth1 [ 108.144777] scsi 1:1:124:0: Enclosure BROADCOM VirtualSES 03 PQ: 0 ANSI: 7 [ 108.336443] qedr: discovered and registered 2 RDMA funcs [ 108.470025] systemd-udevd[1847]: Using default interface naming scheme 'rhel-8.0'. [ 108.570501] systemd[1]: Created slice system-rdma\x2dload\x2dmodules.slice. [ OK ] Created slice system-rdma\x2dload\x2dmodules.slice. Startin[ 108.733928] systemd[1]: Starting Load RDMA modules from /etc/rdma/modules/roce.conf... g Load RDMA modules from /etc/rdma/modules/roce.conf... Startin[ 108.907898] systemd[1]: Starting Load RDMA modules from /etc/rdma/modules/rdma.conf... g Load RDMA modules from /etc/rd[ 109.044766] iscsi: registered transport (iser) ma/modules/rdma.[ 109.116725] systemd-modules-load[2074]: Inserted module 'ib_iser' conf... [ 109.208219] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 109.293713] systemd[1]: Started udev Wait for Complete Device Initialization. [ 109.301494] db_root: cannot open: /etc/target [ OK ] Started udev[ 109.474806] systemd-modules-load[2074]: Inserted module 'ib_isert' Wait for Comple[ 109.503054] scsi 1:3:107:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 te Device Initia[ 109.692242] scsi 1:3:108:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 lization. [ 109.808339] systemd-modules-load[2074]: Inserted module 'ib_srpt' [ 109.808703] scsi 1:3:109:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 [ 109.893401] systemd[1]: Started Load RDMA modules from /etc/rdma/modules/roce.conf. [ 110.002488] scsi 1:3:110:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 [ OK 110.212625] scsi 1:3:111:0: Direct-Access HPE MR416i-p Gen10+ 5.16 PQ: 0 ANSI: 5 0m] Started Load[ 110.213236] systemd-modules-load[2074]: Inserted module 'rdma_ucm' RDMA modules fr[ 110.398211] scsi 1:1:124:0: Attached scsi generic sg1 type 13 om /etc/rdma/mod[ 110.429204] systemd-modules-load[2074]: Failed to find module 'xprtrdma' [ 110.515402] scsi 1:3:107:0: Attached scsi generic sg2 type 0 [ 110.613015] systemd-modules-load[2074]: Failed to find module 'svcrdma' [ 110.698204] scsi 1:3:108:0: Attached scsi generic sg3 type 0 [ 110.787094] systemd[1]: rdma-load-modules@rdma.service: Main process exited, code=exited, status=1/FAILURE [ 110.864790] scsi 1:3:109:0: Attached scsi generic sg4 type 0 [ 110.990755] systemd[1]: rdma-load-modules@rdma.service: Failed with result 'exit-code'. [ 111.068711] scsi 1:3:110:0: Attached scsi generic sg5 type 0 [ 111.174387] systemd[1]: Failed to start Load RDMA modules from /etc/rdma/modules/rdma.conf. [ 111.252575] scsi 1:3:111:0: Attached scsi generic sg6 type 0 [FAILED[ 111.441806] sd 1:3:109:0: [sdc] 4939212288 512-byte logical blocks: (2.53 TB/2.30 TiB) ] Failed to [ 111.441925] sd 1:3:111:0: [sde] 1561722880 512-byte logical blocks: (800 GB/745 GiB) start Load RDMA [ 111.442387] sd 1:3:107:0: [sda] 4939212288 512-byte logical blocks: (2.53 TB/2.30 TiB) modules from /et[ 111.442388] sd 1:3:107:0: [sda] 4096-byte physical blocks c/rdma/modules/r[ 111.442421] sd 1:3:107:0: [sda] Write Protect is off [ 111.442480] sd 1:3:107:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA dma.conf. [ 111.444016] sd 1:3:108:0: [sdb] 4939212288 512-byte logical blocks: (2.53 TB/2.30 TiB) [ 111.444018] sd 1:3:108:0: [sdb] 4096-byte physical blocks [ 111.444023] sd 1:3:107:0: [sda] Optimal transfer size 196608 bytes [ 111.444045] sd 1:3:108:0: [sdb] Write Protect is off [ 111.444104] sd 1:3:108:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 111.444211] sd 1:3:110:0: [sdd] 4939212288 512-byte logical blocks: (2.53 TB/2.30 TiB) [ 111.444212] sd 1:3:110:0: [sdd] 4096-byte physical blocks [ 111.445628] sd 1:3:110:0: [sdd] Write Protect is off [ 111.445685] sd 1:3:110:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 111.445806] sd 1:3:108:0: [sdb] Optimal transfer size 196608 bytes [ 111.457062] sd 1:3:110:0: [sdd] Optimal transfer size 196608 bytes [ 111.461782] sd 1:3:110:0: [sdd] Attached SCSI disk [ 111.461923] sd 1:3:107:0: [sda] Attached SCSI disk [ 111.462217] sd 1:3:108:0: [sdb] Attached SCSI disk [ 111.563255] sd 1:3:109:0: [sdc] 4096-byte physical blocks [ 111.563397] sd 1:3:109:0: [sdc] Write Protect is off [ 111.673657] sd 1:3:111:0: [sde] Write Protect is off [ 111.786165] sd 1:3:109:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 111.944366] sd 1:3:111:0: [sde] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 112.069499] sd 1:3:109:0: [sdc] Optimal transfer size 196608 bytes [ 112.174787] sd 1:3:111:0: [sde] Optimal transfer size 65536 bytes [ 112.187662] sd 1:3:109:0: [sdc] Attached SCSI disk [ 113.139560] sde: sde1 sde2 sde3 sde4 See 'systemctl s[ 114.007806] sd 1:3:111:0: [sde] Attached SCSI disk tatus rdma-load-modules@rdma.service' for details. [ OK 114.137315] systemd[1]: Found device Virtual_DVD-ROM rhcos-410.84.202209272044-0. 0m] Found device Virtual_DVD-ROM rhcos-410.84.202209272044-0. [ OK 114.347888] systemd[1]: Reached target RDMA Hardware. 0m] Reached target RDMA Hardware. [ OK 114.464212] systemd[1]: Reached target Network (Pre). 0m] Reached target Network (Pre). Startin[ 114.581242] systemd[1]: Starting Device-Mapper Multipath Device Controller... g Device-Mapper Multipath Device Controller... [ OK 114.738384] systemd[1]: Started Device-Mapper Multipath Device Controller. 0m] Started Devi[ 114.845884] multipathd[2144]: --------start up-------- ce-Mapper Multip[ 114.924338] multipathd[2144]: read /etc/multipath.conf ath Device Contr[ 115.003028] multipathd[2144]: /etc/multipath.conf does not exist, blacklisting all devices. oller. [ 115.120698] multipathd[2144]: You can run "/sbin/mpathconf --enable" to create [ 115.216258] multipathd[2144]: /etc/multipath.conf. See man mpathconf(8) for more details [ 115.216265] multipathd[2144]: path checkers start up [ OK 115.216274] multipathd[2144]: /etc/multipath.conf does not exist, blacklisting all devices. 0m] Reached targ[ 115.216281] multipathd[2144]: You can run "/sbin/mpathconf --enable" to create et Local File Sy[ 115.216288] multipathd[2144]: /etc/multipath.conf. See man mpathconf(8) for more details stems (Pre). [ 115.216383] systemd[1]: Reached target Local File Systems (Pre). [ 115.811596] systemd[1]: Reached target Local File Systems. [ OK ] Reached target Local File Systems. Startin[ 115.946819] systemd[1]: Starting Create Volatile Files and Directories... g Create Volatile Files and Directories... Startin[ 116.094103] systemd[1]: Starting Open-iSCSI... [ 116.171194] iscsid[2153]: iscsid: can't open InitiatorName configuration file /etc/iscsi/initiatorname.iscsi [ 116.306828] iscsid[2153]: iscsid: Warning: InitiatorName file /etc/iscsi/initiatorname.iscsi does not exist or does not contain a properly formatted InitiatorName. If using software iscsi (iscsi_tcp or ib_iser) or partial offload (bnx2i or cxgbi iscsi), you may not be able to log into or discover targets. Please create a file /etc/iscsi/initiatorname.iscsi that contains a sting with the format: InitiatorName=iqn.yyyy-mm.[:identifier]. [ 116.306839] iscsid[2153]: Example: InitiatorName=iqn.2001-04.com.redhat:fc6. [ OK 116.306846] iscsid[2153]: If using hardware iscsi like qla4xxx this message can be ignored. 0m] Started Open[ 116.306853] iscsid[2153]: iscsid: can't open InitiatorAlias configuration file /etc/iscsi/initiatorname.iscsi -iSCSI. [ 116.306940] systemd[1]: Started Open-iSCSI. [ 117.232427] systemd[1]: Started Create Volatile Files and Directories. [ OK ] Started Create Volatile Files and Directories. [ OK 117.392228] systemd[1]: Reached target System Initialization. 0m] Reached target System Initialization. [ OK 117.525224] systemd[1]: Reached target Basic System. 0m] Reached target Basic System. Startin[ 117.641479] systemd[1]: Starting Ignition (fetch-offline)... g Ignition (fetc[ 117.734616] ignition[2154]: fetched base config from "system" h-offline)... [ 117.820697] ignition[2154]: Ignition 2.13.0 [ 117.886719] systemd[1]: Started Ignition (fetch-offline). [ 117.886734] ignition[2154]: Stage: fetch-offline [ OK 117.886781] ignition[2154]: reading system config file "/usr/lib/ignition/base.d/00-core.ign" 0m] Started Igni[ 118.143795] ignition[2154]: no config dir at "/usr/lib/ignition/base.platform.d/metal" tion (fetch-offl[ 118.256248] ignition[2154]: no config URL provided ine). [ 118.330808] ignition[2154]: reading system config file "/usr/lib/ignition/user.ign" [ 118.432027] systemd[1]: Starting Copy CoreOS Firstboot Networking Config... Startin[ 118.524965] ignition[2154]: no config at "/usr/lib/ignition/user.ign" g Copy CoreOS Fi[ 118.619594] coreos-copy-firstboot-network[2168]: info: no files to copy from /etc/coreos-firstboot-network; skipping rstboot Networki[ 118.763770] ignition[2154]: not a config (empty): provider config was empty, continuing with empty cache config ng Config... [ 118.902357] ignition[2154]: fetch-offline: fetch-offline passed [ 118.988500] systemd[1]: Starting RHCOS Check For Legacy LUKS Configuration... [ 118.988529] ignition[2154]: Ignition finished successfully Starting RHCOS Check For Legacy LUKS Configuration... [ OK 119.229204] systemd[1]: Started Copy CoreOS Firstboot Networking Config. 0m] Started Copy CoreOS Firstboot Networking Config. [ OK 119.385827] systemd[1]: Started RHCOS Check For Legacy LUKS Configuration. 0m] Started RHCOS Check For Legacy LUKS Configuration. Startin[ 119.547283] systemd[1]: Starting dracut initqueue hook... g dracut initqueue hook... Startin[ 119.660022] systemd[1]: Starting Ignition (kargs)... g Ignition (karg[ 119.746443] ignition[2184]: Ignition 2.13.0 s)... [ 119.813599] systemd[1]: Started dracut initqueue hook. [ OK 119.885227] ignition[2184]: Stage: kargs 0m] Started drac[ 119.949278] ignition[2184]: reading system config file "/usr/lib/ignition/base.d/00-core.ign" ut initqueue hoo[ 120.069236] ignition[2184]: no config dir at "/usr/lib/ignition/base.platform.d/metal" k. [ 120.181543] systemd[1]: Starting dracut pre-mount hook... [ 120.181567] ignition[2184]: kargs: kargs passed Startin[ 120.181614] ignition[2184]: Ignition finished successfully g dracut pre-mount hook... [ OK 120.425308] systemd[1]: Reached target Remote File Systems (Pre). 0m] Reached target Remote File Systems (Pre). [ OK 120.566541] systemd[1]: Reached target Remote File Systems. 0m] Reached target Remote File Systems. [ OK 120.695405] systemd[1]: Started Ignition (kargs). 0m] Started Ignition (kargs). [ OK 120.802819] systemd[1]: Started dracut pre-mount hook. 0m] Started dracut pre-mount hook. Startin[ 120.921485] systemd[1]: Starting Ignition (disks)... g Ignition (disk[ 121.007672] ignition[2208]: Ignition 2.13.0 s)... [ 121.074735] ignition[2208]: Stage: disks [ 121.131383] systemd[1]: Started Ignition (disks). [ 121.131403] ignition[2208]: reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ 121.131421] ignition[2208]: no config dir at "/usr/lib/ignition/base.platform.d/metal" [ 121.131429] ignition[2208]: disks: disks passed [ 121.131440] ignition[2208]: Ignition finished successfully [ OK ] Started Ignition (disks). [ OK 121.604109] systemd[1]: Reached target Initrd Root Device. 0m] Reached target Initrd Root Device. Startin[ 121.732177] systemd[1]: Starting run-media-iso-mount.service... g run-media-iso-mount.service... [ 122.057094] systemd[1]: Started run-media-iso-mount.service. [ OK ] Started run-media-iso-mount.service. Mountin[ 122.190348] systemd[1]: Mounting /sysroot... g /sysroot... Startin[ 122.277429] systemd[1]: Starting Persist osmet files (ISO)... g Persist osmet files (ISO)... [ 122.400641] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ OK 122.663320] systemd[1]: Mounted /sysroot. 0m] Mounted /sysroot. Startin[ 122.754350] systemd[1]: Starting OSTree Prepare OS/... g OSTree Prepare OS/... [ 123.025413] ostree-prepare-root[2244]: preparing sysroot at /sysroot [ 123.510705] ostree-prepare-root[2244]: Resolved OSTree target to: /sysroot/ostree/deploy/rhcos/deploy/2ef5f6072b5ae046e12dc2a6946792c51195a11339964bdebe00f6cd5ebbe26a.0 [ 123.709481] ostree-prepare-root[2244]: filesystem at /sysroot currently writable: 0 [ 123.810756] ostree-prepare-root[2244]: sysroot.readonly configuration value: 0 [ 123.906788] systemd[1]: sysroot-ostree-deploy-rhcos-deploy-2ef5f6072b5ae046e12dc2a6946792c51195a11339964bdebe00f6cd5ebbe26a.0.mount: Succeeded. [ 124.080199] systemd[1]: sysroot.tmp-usr.mount: Succeeded. [ 124.154385] systemd[1]: sysroot.tmp-boot.mount: Succeeded. [ 124.229489] systemd[1]: sysroot.tmp.mount: Succeeded. [ 124.299167] systemd[1]: proc-cmdline.mount: Succeeded. [ 124.369703] systemd[1]: Started OSTree Prepare OS/. [ OK ] Started OSTree Prepare OS/. Startin[ 124.490265] systemd[1]: Starting sysroot-xfs-ephemeral-setup.service... g sysroot-xfs-ephemeral-setup.service... [ OK 125.766106] systemd[1]: Started Persist osmet files (ISO). 0m] Started Persist osmet files (ISO). [ OK 127.687947] systemd[1]: Started sysroot-xfs-ephemeral-setup.service. 0m] Started sysroot-xfs-ephemeral-setup.service. Mountin[ 127.837542] systemd[1]: Mounting /sysroot/var... g /sysroot/var... [ 127.931876] systemd[1]: sysroot-etc.mount: Directory /sysroot/etc to mount over is not empty, mounting anyway. [ 128.060883] systemd[1]: Mounting /sysroot/etc... Mounting /sysroot/etc... [ OK 128.164560] systemd[1]: Mounted /sysroot/var. 0m] Mounted /sysroot/var. [ OK 128.264482] systemd[1]: Mounted /sysroot/etc. 0m] Mounted /sysroot/etc. Startin[ 128.365191] systemd[1]: Starting sysroot-relabel.service... g sysroot-relabel.service... [ OK 128.708455] systemd[1]: Started sysroot-relabel.service. 0m] Started sysroot-relabel.service. [ OK 128.830396] systemd[1]: Reached target Initrd Root File System. 0m] Reached target Initrd Root File System. Startin[ 128.967420] systemd[1]: Starting Ignition (mount)... g Ignition (moun[ 129.051986] ignition[2268]: INFO : Ignition 2.13.0 t)... [ 129.130469] ignition[2268]: INFO : Stage: mount [ 129.196872] ignition[2268]: INFO : reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ 129.196884] ignition[2268]: DEBUG : parsing config with SHA512: ff6a5153be363997e4d5d3ea8cc4048373a457c48c4a5b134a08a30aacd167c1e0f099f0bdf1e24c99ad180628cd02b767b863b5fe3a8fce3fe1886847eb8e2e [ 129.196892] ignition[2268]: INFO : no config dir at "/usr/lib/ignition/base.platform.d/metal" [ 129.196899] ignition[2268]: INFO : mount: mount passed [ 129.196906] ignition[2268]: INFO : Ignition finished successfully [ 129.196941] systemd[1]: Started Ignition (mount). [ OK ] Started Ignition (mount). Startin[ 129.938674] systemd[1]: Starting Populate OSTree /var... g Populate OSTree /var... [ 130.053249] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/lib from (null) to system_u:object_r:var_lib_t:s0 [ 130.194465] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/log from (null) to system_u:object_r:var_log_t:s0 [ 130.339959] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/home from (null) to system_u:object_r:home_root_t:s0 [ 130.485248] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/roothome from (null) to system_u:object_r:admin_home_t:s0 [ 130.643350] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/roothome/.bash_logout from (null) to system_u:object_r:admin_home_t:s0 [ 130.816119] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/roothome/.bash_profile from (null) to system_u:object_r:admin_home_t:s0 [ 130.990947] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/roothome/.bashrc from (null) to system_u:object_r:admin_home_t:s0 [ 131.160644] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/opt from (null) to system_u:object_r:var_t:s0 [ 131.299367] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/srv from (null) to system_u:object_r:var_t:s0 [ 131.299430] systemd[1]: Started Populate OSTree /var. [ OK 131.299449] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/usrlocal from (null) to system_u:object_r:var_t:s0 0m] Started Popu[ 131.299458] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/usrlocal/bin from (null) to system_u:object_r:bin_t:s0 late OSTree /var. [ 131.824394] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/usrlocal/etc from (null) to system_u:object_r:var_t:s0 [ 131.983438] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/usrlocal/games from (null) to system_u:object_r:var_t:s0 [ 131.983446] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/usrlocal/include from (null) to system_u:object_r:var_t:s0 Starting Ignition (file[ 131.983457] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/usrlocal/lib from (null) to system_u:object_r:var_t:s0 s)... [ 131.983465] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/usrlocal/man from (null) to system_u:object_r:var_t:s0 [ 131.983472] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/usrlocal/sbin from (null) to system_u:object_r:var_t:s0 [ 131.983479] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/usrlocal/share from (null) to system_u:object_r:var_t:s0 [ 131.983486] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/usrlocal/src from (null) to system_u:object_r:var_t:s0 [ 131.983544] systemd[1]: Starting Ignition (files)... [ 133.213515] ignition-ostree-populate-var[2287]: Relabeled /sysroot//var/mnt from (null) to system_u:object_r:var_t:s0 [ 133.356111] ignition[2318]: INFO : Ignition 2.13.0 [ 133.432483] ignition[2318]: INFO : Stage: files [ 133.505633] ignition[2318]: INFO : reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ 133.634572] ignition[2318]: DEBUG : parsing config with SHA512: ff6a5153be363997e4d5d3ea8cc4048373a457c48c4a5b134a08a30aacd167c1e0f099f0bdf1e24c99ad180628cd02b767b863b5fe3a8fce3fe1886847eb8e2e [ 133.874221] ignition[2318]: INFO : no config dir at "/usr/lib/ignition/base.platform.d/metal" [ 133.996296] ignition[2318]: INFO : files: ensureUsers: op(1): [started] creating or modifying user "core" [ 134.131816] ignition[2318]: DEBUG : files: ensureUsers: op(1): executing: "useradd" "--root" "/sysroot" "--create-home" "--password" "*" "--comment" "CoreOS Admin" "--groups" "adm,sudo,systemd-journal,wheel" "core" [ 135.788252] ignition[2318]: INFO : files: ensureUsers: op(1): [finished] creating or modifying user "core" [ 135.924122] ignition[2318]: INFO : files: createResultFile: createFiles: op(2): [started] writing file "/sysroot/etc/.ignition-result.json" [ 135.924131] ignition[2318]: INFO : files: createResultFile: createFiles: op(2): [finished] writing file "/sysroot/etc/.ignition-result.json" [ OK ] Started Igni[ 135.924138] ignition[2318]: INFO : files: op(3): [started] relabeling 15 patterns tion (files). [ 135.924146] ignition[2318]: DEBUG : files: op(3): executing: "setfiles" "-vF0" "-r" "/sysroot" "/sysroot/etc/selinux/targeted/contexts/files/file_contexts" "-f" "-" [ 135.924156] ignition[2318]: INFO : files: op(3): [finished] relabeling 15 patterns [ 135.924163] ignition[2318]: INFO : files: files passed [ 135.924171] ignition[2318]: INFO : Ignition finished successfully [ 135.924237] systemd[1]: Started Ignition (files). [ 136.981632] systemd[1]: Starting Reload Configuration from the Real Root... Starting Reload Configuration from the Real Root... [ OK 137.133313] systemd[1]: Reached target Ignition Complete. 0m] Reached target Ignition Complete. [ 137.260873] systemd[1]: Reloading. [ 137.430994] multipathd[2144]: exit (signal) Stoppin[ 137.495617] multipathd[2144]: --------shut down------- g Device-Mapper [ 137.574190] systemd[1]: Stopping Device-Mapper Multipath Device Controller... Multipath Device Controller... [ 137.699715] systemd[1]: multipathd.service: Succeeded. [ 137.775587] systemd[1]: Stopped Device-Mapper Multipath Device Controller. [ OK ] Stopped Device-Mapper Multipath Device Controller. [ 137.951881] systemd[1]: initrd-parse-etc.service: Succeeded. [ 138.033719] systemd[1]: Started Reload Configuration from the Real Root. [ OK ] Started Reload Configuration from the Real Root. [ OK 138.189807] systemd[1]: Reached target Initrd File Systems. 0m] Reached target Initrd File Systems. [ 138.318237] systemd[1]: Reached target Initrd Default Target. [ OK ] Reached target Initrd Default Target. Startin[ 138.453075] systemd[1]: Starting dracut pre-pivot and cleanup hook... g dracut pre-piv[ 138.560222] dracut-pre-pivot[2441]: Sep 30 14:39:39 | /etc/multipath.conf does not exist, blacklisting all devices. ot and cleanup hook... [ 138.702843] dracut-pre-pivot[2441]: Sep 30 14:39:39 | /etc/multipath.conf does not exist, blacklisting all devices. [ 138.846177] dracut-pre-pivot[2441]: Sep 30 14:39:39 | You can run "/sbin/mpathconf --enable" to create [ OK ] Started dracut pre-pivot and cleanup hook. [ 138.970816] dracut-pre-pivot[2441]: Sep 30 14:39:39 | You can run "/sbin/mpathconf --enable" to create [ 139.143192] dracut-pre-pivot[2441]: Sep 30 14:39:39 | /etc/multipath.conf. See man mpathconf(8) for more details Starting Cleaning Up and Shutting Down Daemons... [ 139.278144] dracut-pre-pivot[2441]: Sep 30 14:39:39 | /etc/multipath.conf. See man mpathconf(8) for more details [ 139.455178] systemd[1]: Started dracut pre-pivot and cleanup hook. [ OK 139.541752] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... 0m] Stopped Core[ 139.640228] systemd[1]: coreos-touch-run-agetty.service: Succeeded. OS: Touch /run/a[ 139.732408] systemd[1]: Stopped CoreOS: Touch /run/agetty.reload. getty.reload. [ 139.829634] systemd[1]: coreos-liveiso-persist-osmet.service: Succeeded. [ 139.921639] systemd[1]: Stopped Persist osmet files (ISO). [ OK ] Stopped Persist osmet files (ISO). [ 140.060321] systemd[1]: Stopped target Timers. [ OK ] Stopped target Timers. [ 140.161273] systemd[1]: Stopped target Network (Pre). [ OK ] Stopped target Network (Pre). [ 140.277303] systemd[1]: clevis-luks-askpass.path: Succeeded. [ 140.355822] systemd[1]: Stopped Forward Password Requests to Clevis Directory Watch. [ OK ] Stopped Forward Password Requests to Clevis Directory Watch. [ OK 140.548531] systemd[1]: Stopped target RDMA Hardware. 0m] Stopped target RDMA Hardware. [ 140.664230] systemd[1]: dracut-pre-pivot.service: Succeeded. [ 140.742526] systemd[1]: Stopped dracut pre-pivot and cleanup hook. [ OK ] Stopped dracut pre-pivot and cleanup hook. [ OK 140.897342] systemd[1]: Stopped target Initrd Default Target. 0m] Stopped target Initrd Default Target. [ OK 141.031310] systemd[1]: Stopped target Initrd Root Device. 0m] Stopped target Initrd Root Device. [ OK 141.158300] systemd[1]: Stopped target Ignition Complete. 0m] Stopped target Ignition Complete. [ 141.284585] systemd[1]: ignition-files.service: Succeeded. [ 141.359785] systemd[1]: Stopped Ignition (files). [ OK ] Stopped Ignition (files). [ 141.476609] systemd[1]: ignition-fetch-offline.service: Succeeded. [ 141.559959] systemd[1]: Stopped Ignition (fetch-offline). [ OK ] Stopped Ignition (fetch-offline). [ 141.683586] systemd[1]: coreos-ignition-setup-user.service: Succeeded. [ 141.770759] systemd[1]: Stopped CoreOS Ignition User Config Setup. [ OK ] Stopped CoreOS Ignition User Config Setup. [ 141.921481] systemd[1]: dracut-pre-mount.service: Succeeded. [ 141.997754] systemd[1]: Stopped dracut pre-mount hook. [ OK ] Stopped dracut pre-mount hook. [ OK 142.123343] systemd[1]: Stopped target Remote File Systems. 0m] Stopped target Remote File Systems. [ OK 142.252300] systemd[1]: Stopped target Remote File Systems (Pre). 0m] Stopped target Remote File Systems (Pre). [ 142.393456] systemd[1]: dracut-initqueue.service: Succeeded. [ 142.468967] systemd[1]: Stopped dracut initqueue hook. [ OK ] Stopped dracut initqueue hook. Stoppin[ 142.593496] systemd[1]: Stopping Open-iSCSI... [ 142.670708] iscsid[2153]: iscsid: iscsid shutting down. [ 142.750535] systemd[1]: ignition-ostree-populate-var.service: Succeeded. [ 142.750550] systemd[1]: Stopped Populate OSTree /var. [ OK ] Stopped Populate OSTree /var. Stoppin[ 142.962858] systemd[1]: Stopping Ignition (mount)... g Ignition (moun[ 143.046584] ignition[2472]: INFO : Ignition 2.13.0 t)... [ 143.125272] ignition[2472]: INFO : Stage: umount [ 143.192489] ignition[2472]: INFO : reading system config file "/usr/lib/ignition/base.d/00-core.ign" [ 143.192497] ignition[2472]: DEBUG : parsing config with SHA512: ff6a5153be363997e4d5d3ea8cc4048373a457c48c4a5b134a08a30aacd167c1e0f099f0bdf1e24c99ad180628cd02b767b863b5fe3a8fce3fe1886847eb8e2e [ OK 143.192506] ignition[2472]: INFO : no config dir at "/usr/lib/ignition/base.platform.d/metal" 0m] Stopped Open[ 143.192513] ignition[2472]: INFO : umount: umount passed -iSCSI. [ 143.192519] ignition[2472]: INFO : Ignition finished successfully [ 143.192559] systemd[1]: iscsid.service: Succeeded. [ 143.893186] systemd[1]: Stopped Open-iSCSI. [ OK 143.951245] systemd[1]: ignition-mount.service: Succeeded. 0m] Stopped Igni[ 144.034260] systemd[1]: Stopped Ignition (mount). tion (mount). Stoppin[ 144.119332] systemd[1]: Stopping CoreOS Tear Down Initramfs... g CoreOS Tear Do[ 144.213965] coreos-teardown-initramfs[2484]: info: taking down network device: ens10f0 [ 144.326249] coreos-teardown-initramfs[2484]: RTNETLINK answers: Operation not supported [ 144.439462] coreos-teardown-initramfs[2484]: info: taking down network device: ens10f1 [ 144.439480] systemd[1]: ignition-disks.service: Succeeded. [ OK 144.439495] coreos-teardown-initramfs[2484]: RTNETLINK answers: Operation not supported 0m] Stopped Igni[ 144.439506] systemd[1]: Stopped Ignition (disks). tion (disks). [ 144.439521] coreos-teardown-initramfs[2484]: info: flushing all routing [ 144.439529] coreos-teardown-initramfs[2484]: info: no initramfs hostname information to propagate [ 145.013267] coreos-teardown-initramfs[2484]: info: no networking config is defined in the real root [ 145.013277] coreos-teardown-initramfs[2484]: info: skipping propagation of default networking configs [ OK 145.013360] systemd[1]: ignition-kargs.service: Succeeded. 0m] Stopped Igni[ 145.332249] systemd[1]: Stopped Ignition (kargs). tion (kargs). [ 145.416567] systemd[1]: coreos-copy-firstboot-network.service: Succeeded. [ 145.506263] systemd[1]: Stopped Copy CoreOS Firstboot Networking Config. [ OK ] Stopped Copy CoreOS Firstboot Networking Config. [ 145.670616] systemd[1]: rhcos-fail-boot-for-legacy-luks-config.service: Succeeded. [ 145.769878] systemd[1]: Stopped RHCOS Check For Legacy LUKS Configuration. [ OK ] Stopped RHCOS Check For Legacy LUKS Configuration. [ OK 145.939360] systemd[1]: Stopped target Basic System. 0m] Stopped target Basic System. [ OK 146.054570] systemd[1]: Stopped target Sockets. 0m] Stopped target Sockets. [ OK 146.159277] systemd[1]: Stopped target Slices. 0m] Stopped target Slices. [ OK 146.260274] systemd[1]: Stopped target Paths. 0m] Stopped target Paths. [ OK 146.360276] systemd[1]: Stopped target System Initialization. 0m] Stopped target System Initialization. [ 146.494282] systemd[1]: systemd-sysctl.service: Succeeded. [ 146.568178] systemd[1]: Stopped Apply Kernel Variables. [ OK ] Stopped Apply Kernel Variables. [ 146.697612] systemd[1]: rdma-load-modules@roce.service: Succeeded. [ 146.779863] systemd[1]: Stopped Load RDMA modules from /etc/rdma/modules/roce.conf. [ OK ] Stopped Load RDMA modules from /etc/rdma/modules/roce.conf. [ OK 146.966349] systemd[1]: Stopped target Local Encrypted Volumes. 0m] Stopped target Local Encrypted Volumes. [ 147.102505] systemd[1]: systemd-ask-password-console.path: Succeeded. [ 147.188189] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ 147.380532] systemd[1]: systemd-udev-settle.service: Succeeded. [ 147.460022] systemd[1]: Stopped udev Wait for Complete Device Initialization. [ OK ] Stopped udev Wait for Complete Device Initialization. [ 147.627293] systemd[1]: systemd-udev-trigger.service: Succeeded. [ 147.707899] systemd[1]: Stopped udev Coldplug all Devices. [ OK ] Stopped udev Coldplug all Devices. [ 147.843452] systemd[1]: dracut-pre-trigger.service: Succeeded. [ 147.921871] systemd[1]: Stopped dracut pre-trigger hook. [ OK ] Stopped dracut pre-trigger hook. [ 148.052292] systemd[1]: systemd-modules-load.service: Succeeded. [ 148.132929] systemd[1]: Stopped Load Kernel Modules. [ OK ] Stopped Load Kernel Modules. [ 148.248579] systemd[1]: systemd-tmpfiles-setup.service: Succeeded. [ 148.331258] systemd[1]: Stopped Create Volatile Files and Directories. [ OK ] Stopped Create Volatile Files and Directories. [ OK 148.490323] systemd[1]: Stopped target Swap. 0m] Stopped target Swap. [ OK 148.586296] systemd[1]: Stopped target Local File Systems. 0m] Stopped target Local File Systems. [ OK 148.713279] systemd[1]: Stopped target Local File Systems (Pre). 0m] Stopped target Local File Systems (Pre). [ 148.853368] systemd[1]: Stopping udev Kernel Device Manager... Stopping udev Kernel Device Manager... Stoppin[ 148.976369] systemd[1]: Stopping iSCSI UserSpace I/O driver... g iSCSI UserSpace I/O driver... [ 149.099373] systemd[1]: iscsid.socket: Succeeded. [ 149.163362] systemd[1]: Closed Open-iSCSI iscsid Socket. [ OK ] Closed Open-iSCSI iscsid Socket. [ 149.285900] systemd[1]: iscsiuio.service: Succeeded. [ 149.352929] systemd[1]: Stopped iSCSI UserSpace I/O driver. [ OK ] Stopped iSCSI UserSpace I/O driver. [ 149.488719] systemd[1]: systemd-udevd.service: Succeeded. [ 149.560900] systemd[1]: Stopped udev Kernel Device Manager. [ OK ] Stopped udev Kernel Device Manager. [ 149.696806] systemd[1]: initrd-cleanup.service: Succeeded. [ 149.769950] systemd[1]: Started Cleaning Up and Shutting Down Daemons. [ OK ] Started Cleaning Up and Shutting Down Daemons. [ 149.928791] systemd[1]: coreos-teardown-initramfs.service: Succeeded. [ 150.013352] systemd[1]: Stopped CoreOS Tear Down Initramfs. [ OK ] Stopped CoreOS Tear Down Initramfs. [ 150.150602] systemd[1]: systemd-tmpfiles-setup-dev.service: Succeeded. [ 150.236199] systemd[1]: Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create Static Device Nodes in /dev. [ 150.381581] systemd[1]: kmod-static-nodes.service: Succeeded. [ 150.457672] systemd[1]: Stopped Create list of required static device nodes for the current kernel. [ OK ] Stopped Create list of required sta…vice nodes for the current kernel. [ 150.674468] systemd[1]: dracut-pre-udev.service: Succeeded. [ 150.748480] systemd[1]: Stopped dracut pre-udev hook. [ OK ] Stopped dracut pre-udev hook. [ 150.871444] systemd[1]: dracut-cmdline.service: Succeeded. [ 150.944324] systemd[1]: Stopped dracut cmdline hook. [ OK ] Stopped dracut cmdline hook. [ 151.066472] systemd[1]: dracut-cmdline-ask.service: Succeeded. [ 151.143470] systemd[1]: Stopped dracut ask for additional cmdline parameters. [ OK ] Stopped dracut ask for additional cmdline parameters. [ 151.317682] systemd[1]: systemd-udevd-kernel.socket: Succeeded. [ OK 151.395727] systemd[1]: Closed udev Kernel Socket. 0m] Closed udev Kernel Socket. [ 151.500391] systemd[1]: systemd-udevd-control.socket: Succeeded. [ 151.579673] systemd[1]: Closed udev Control Socket. [ OK ] Closed udev Control Socket. Startin[ 151.698327] systemd[1]: Starting Cleanup udevd DB... g Cleanup udevd DB... [ 151.802384] systemd[1]: iscsiuio.socket: Succeeded. [ 151.868082] systemd[1]: Closed Open-iSCSI iscsiuio Socket. [ OK ] Closed Open-iSCSI iscsiuio Socket. [ 152.002878] systemd[1]: initrd-udevadm-cleanup-db.service: Succeeded. [ 152.087526] systemd[1]: Started Cleanup udevd DB. [ OK ] Started Cleanup udevd DB. [ OK 152.201826] systemd[1]: Reached target Switch Root. 0m] Reached target Switch Root. Startin[ 152.314278] systemd[1]: Starting Switch Root... g Switch Root... [ 152.409877] systemd[1]: Switching root. [ 152.462885] printk: systemd-journal: 4 output lines suppressed due to ratelimiting [ 152.708921] printk: systemd: 21 output lines suppressed due to ratelimiting [ 153.354642] audit: type=1404 audit(1664548794.372:4): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1 [ 153.613364] SELinux: policy capability network_peer_controls=1 [ 153.691922] SELinux: policy capability open_perms=1 [ 153.758847] SELinux: policy capability extended_socket_class=1 [ 153.837270] SELinux: policy capability always_check_network=0 [ 153.914605] SELinux: policy capability cgroup_seclabel=1 [ 153.986635] SELinux: policy capability nnp_nosuid_transition=1 [ 154.096700] audit: type=1403 audit(1664548795.114:5): auid=4294967295 ses=4294967295 lsm=selinux res=1 [ 154.097653] systemd[1]: Successfully loaded SELinux policy in 743.160ms. [ 154.334874] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 25.280ms. [ 154.431085] systemd[1]: systemd 239 (239-45.el8_4.12) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 154.750222] systemd[1]: Detected architecture x86-64. [ 154.819304] systemd[1]: Running with unpopulated /etc. Welcome to Red Hat Enterprise Linux CoreOS 410.84.202209272044-0 (Ootpa)! [ 154.997085] systemd[1]: Initializing machine ID from random generator. [ 156.821366] systemd[1]: Populated /etc with preset unit settings. [ 156.933752] systemd[1]: /usr/lib/systemd/system/bootupd.service:22: Unknown lvalue 'ProtectHostname' in section 'Service' [ 157.091583] systemd[1]: systemd-journald.service: Succeeded. [ 157.168865] systemd[1]: initrd-switch-root.service: Succeeded. [ 157.247949] systemd[1]: Stopped Switch Root. [ OK ] Stopped Switch Root. [ 157.355709] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart. [ 157.489412] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 157.605298] systemd[1]: Stopped Journal Service. [ OK ] Stopped Journal Service. [ 157.721299] systemd[1]: Starting Journal Service... Starting Journal Service... [ 157.830147] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 157.967065] systemd[1]: Reached target Synchronize afterburn-sshkeys@.service template instances. [ OK ] Reached target Synchronize afterbur…hkeys@.service template instances. [ 158.183538] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 158.376118] systemd[1]: Stopped target Switch Root. [ OK ] Stopped target Switch Root. [ 158.496360] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ OK ] Listening on Device-mapper event daemon FIFOs. [ 158.657031] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 158.774123] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 158.917773] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 159.060418] systemd[1]: sysroot-xfs-ephemeral-mkfs.service: Succeeded. [ 159.148082] systemd[1]: Stopped sysroot-xfs-ephemeral-mkfs.service. [ OK ] Stopped sysroot-xfs-ephemeral-mkfs.service. [ 159.301568] systemd[1]: Started Forward Password Requests to Clevis Directory Watch. [ OK ] Started Forward Password Requests to Clevis Directory Watch. [ 159.492111] systemd[1]: Stopped target Initrd Root File System. [ OK ] Stopped target Initrd Root File System. [ 159.639388] systemd[1]: ostree-prepare-root.service: Succeeded. [ 159.719874] systemd[1]: Stopped OSTree Prepare OS/. [ OK ] Stopped OSTree Prepare OS/. [ 159.840183] systemd[1]: Reached target Local Encrypted Volumes (Pre). [ OK ] Reached target Local Encrypted Volumes (Pre). [ 159.999309] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 160.153129] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 160.263702] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 160.396332] systemd[1]: Created slice system-sshd\x2dkeygen.slice. [ OK ] Created slice system-sshd\x2dkeygen.slice. [ 160.547110] systemd[1]: Stopped target Initrd File Systems. [ OK ] Stopped target Initrd File Systems. [ 160.684997] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st…ce nodes for the current kernel... [ 160.895121] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 161.001345] systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... [ 161.135407] systemd[1]: Listening on Process Core Dump Socket. [ OK ] Listening on Process Core Dump Socket. [ 161.278384] systemd[1]: sysroot-relabel.service: Succeeded. [ 161.354239] systemd[1]: Stopped sysroot-relabel.service. [ OK ] Stopped sysroot-relabel.service. [ 161.486400] systemd[1]: Listening on LVM2 poll daemon socket. [ OK ] Listening on LVM2 poll daemon socket. [ 161.628394] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 161.816208] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... Starting Monitoring of LVM2 mirrors…ng dmeventd or progress polling... [ 162.039137] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 162.171167] systemd[1]: Reached target Remote Encrypted Volumes. [ OK ] Reached target Remote Encrypted Volumes. [ 162.319123] systemd[1]: Reached target Local Encrypted Volumes. [ OK ] Reached target Local Encrypted Volumes. [ 162.467338] systemd[1]: Starting Create System Users... Starting Create System Users... [ 162.584117] systemd[1]: Starting Load/Save Random Seed... Starting Load/Save Random Seed... [ 162.705885] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ 162.928774] systemd[1]: Starting Rebuild Hardware Database... Starting Rebuild Hardware Database... [ 163.057123] systemd[1]: sysroot-xfs-ephemeral-setup.service: Succeeded. [ 163.145342] systemd[1]: Stopped sysroot-xfs-ephemeral-setup.service. [ OK ] Stopped sysroot-xfs-ephemeral-setup.service. [ 163.302842] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 163.434023] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... [ 163.562385] systemd[1]: run-media-iso-mount.service: Succeeded. [ 163.641833] systemd[1]: Stopped run-media-iso-mount.service. [ OK ] Stopped run-media-iso-mount.service. [ 163.779661] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 163.939185] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 164.064055] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 164.192659] systemd[1]: sysroot-usr.mount: Succeeded. [ 164.261302] systemd[1]: sysroot-var.mount: Succeeded. [ 164.329847] systemd[1]: sysroot-boot.mount: Succeeded. [ 164.399391] systemd[1]: sysroot-sysroot.mount: Succeeded. [ 164.472168] systemd[1]: sysroot-etc.mount: Succeeded. [ 164.540605] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Started Load Kernel Modules. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd or progress polling. [ OK ] Started Create System Users. [ OK ] Started Load/Save Random Seed. [ OK ] Started Rebuild Hardware Database. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Started udev Coldplug all Devices. Starting udev Wait for Complete Device Initialization... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... Mounting FUSE Control File System... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted FUSE Control File System. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Flush Journal to Persistent Storage. Starting Load RDMA modules from /etc/rdma/modules/roce.conf... Starting Load RDMA modules from /etc/rdma/modules/rdma.conf... Starting RDMA Node Description Daemon... [ OK ] Started Load RDMA modules from /etc/rdma/modules/roce.conf. [ OK ] Started RDMA Node Description Daemon. [ OK ] Started Load RDMA modules from /etc/rdma/modules/rdma.conf. [ OK ] Reached target RDMA Hardware. [ OK ] Reached target Network (Pre). [ OK ] Started udev Wait for Complete Device Initialization. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Rebuild Journal Catalog... Starting Restore /run/initramfs on shutdown... Starting Create Volatile Files and Directories... Starting Rebuild Dynamic Linker Cache... Starting Run update-ca-trust... [ OK ] Started Rebuild Journal Catalog. [ OK ] Started Restore /run/initramfs on shutdown. [ OK ] Started Create Volatile Files and Directories. Starting RHCOS Fix SELinux Labeling For /usr/local/sbin... Starting Security Auditing Service... [ OK ] Started RHCOS Fix SELinux Labeling For /usr/local/sbin. [ OK ] Started Run update-ca-trust. [ OK ] Started Security Auditing Service. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Rebuild Dynamic Linker Cache. Starting Update is Completed... [ OK ] Started Update is Completed. [ OK ] Reached target System Initialization. [ OK ] Started daily update of the root trust anchor for DNSSEC. [ OK ] Started Monitor console-login-helpe…ue snippets directory for changes. [ OK ] Listening on bootupd.socket. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Started OSTree Monitor Staged Deployment. [ OK ] Reached target Paths. [ OK ] Reached target Basic System. Starting Load CPU microcode update... Starting OpenSSH ed25519 Server Key Generation... [ OK ] Started D-Bus System Message Bus. Starting Generate console-login-helper-messages issue snippet... Starting tarted NTP client/server. [ OK ] Reached target sshd-keygen.target. Starting Generate SSH keys snippet …a console-login-helper-messages... [ OK ] Started Generate console-login-helper-messages issue snippet. [ OK ] Started Generate SSH keys snippet f…via console-login-helper-messages. Starting Hostname Service... Starting Generate console-login-helper-messages issue snippet... [ OK ] Started Hostname Service. [ OK ] Started System Security Services Daemon. Starting Network Manager Script Dispatcher Service... [ OK ] Reached target User and Group Name Lookups. Starting Login Service... [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started Login Service. [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting OpenSSH server daemon... [ OK ] Started Generation of shadow ID ranges for CRI-O. [ OK ] Started OpenSSH server daemon. [ OK ] Started Generate console-login-helper-messages issue snippet. Starting Permit User Sessions... [ OK ] Started Permit User Sessions. [ OK ] Started Getty o